Removal of malachite green from wastewater using date seeds as natural adsorbent; isotherms, kinetics, Thermodynamic, and batch adsorption process design.

This research explores the feasibility of using date seeds (DS), an agricultural waste, for the adsorption of malachite green (MG) dye from synthesized wastewater. The characterization of the DS before and after adsorption was accomplished by FTIR, SEM, BET, and EDX measurements. Batch adsorption experiments were investigated for MG dye adsorption from aqueous solution onto the DS. The effect of different parameters such as solution pH, adsorbent dose, contact time, temperature, and the initial dye concentration were studied. The optimum pH, adsorbent dose, temperature, and contact time for the dye removal were found to be 5, 0.1 g, 25 °C, and 30 min, respectively. The equilibrium studies for the data with Langmuir, Freundlich, and Temkin isotherms showed that Freundlich isotherm is the best model to describe the adsorption of MG onto the DS particles which has a heterogeneous surface. It was found that the adsorption process follows a pseudo-second-order kinetic model which revealed that the intra-particle diffusion stage is the rate-controlling stage for the process. The thermodynamic parameters ΔG, ΔS, and ΔH suggest the possibility of chemisorption and physisorption simultaneously and indicate the exothermic and spontaneous characters of the adsorption of MG dye on DS with negative values of ΔH and ΔG.

This study used agriculture waste (date seeds) which is proved to be an environmentally friendly and low-cost adsorbent. The date seeds were shown to be a promising adsorbent, demonstrating high surface area and well-developed porosity. The prepared adsorbent will have a great impact on wastewater treatment technology and possible applications at a large scale. Thus, widespread and great progress in this area can be expected in the future.

Raw sawdust utilization for the removal of acid red57 and basic fuchsin dyes from aqueous solution: equilibrium, kinetics, and thermodynamic investigation.

The aim of work is the use of a cheap adsorbent; sawdust (SD), for the adsorption of anionic dye, acid red57 (AR57), and cationic dye, basic fuchsin (BF). The adsorption of AR57 and BF on SD increased by increasing contact time and adsorbent dosage, while decreased with the increase of temperature and initial dye concentration. The increase in pH decreased the adsorption of AR57 and increased the adsorption of BF. The effective pH, adsorbent dose, and contact time on the AR57 removal efficiency were found to be 3, 0.1 g and 50 min, respectively. While for BF it was found to be 6, 0.2 g and 50 min, respectively. Fitting equilibrium data to Langmuir, Freundlich and Temkin isotherms showed that Freundlich model is the most suitable to describe the acid red57 and basic fuchsin. The kinetic studies indicate that the adsorption of AR57 and BF follows a pseudo-second-order model. The adsorption of both AR57 and BF is spontaneous (ΔG = -3.97, -3.27 kJ/mol) and exothermic (ΔH = -22.9, -8.3 kJ/mol) with negative values of ΔG and ΔH. The negative values of ΔS of both AR57 and BF (ΔS = -64.6, -16.7 J/mol. K) showed that the randomness decreases through the adsorption process.

SD is locally available in Egypt - Damietta, as solid residue and it is very cheap, therefore there is no need for its regeneration and reuse because of its nearly free cost and safe disposable. On the other hand, the treated waste liquids reach satisfied limits for reusing in the agriculture of palm trees.

Experimental study on the adsorption of Cr+6 and Ni+2 from aqueous solution using low-cost natural material.

The adsorption behavior of Chromium (Cr)(VI) and Nickel (Ni)(II) from aqueous solution onto date pits (DPs) was investigated as a function of initial concentration (5-100 mg/L), contact time (0-70 min), adsorbent dose (2-20 g/L), pH (1-9), and temperature (25-95[Formula: see text] Equilibrium took place after 45 and 55 min for Cr(VI) and Ni(II), respectively. The removal efficiency reached 100% and 95% for Cr(VI) and Ni(II), respectively, at optimal conditions. Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) analyses were performed to characterize the adsorbent. The Langmuir, Freundlich, Tempkin, and Dubinin-Radushkevich (D-R) models were applied to describe the equilibrium isotherms. The values of the free energy (ΔG), enthalpy (ΔH), and entropy (ΔS) were 34.599 kJ/mol, 17.5736 kJ/mol K, and -51.58 kJ/mol K, respectively, at pH 3 for Cr(VI) and -25.283 kJ/mol, -14.8525 kJ/mol K, and 31.31 kJ/mol K, respectively, at pH 6 for Ni(II). Kinetics of the adsorption was analyzed. The pseudo-first-order was suitable for Cr(VI) at R2 = 0.9977, and the pseudo-second-order model was suitable for the Ni(II) at R2 = 0.999. The maximum adsorption capacities were 110.02 mg Cr(VI)/g and 10.1 mg Ni(II)/g. A single-stage batch adsorber was designed for the adsorption of Cr(VI) and Ni(II) by DP based on the optimum isotherm.

Adsorption of cationic dye from aqueous solutions by date pits: Equilibrium, kinetic, thermodynamic studies, and batch adsorber design.

The retention profile of methylene blue from aqueous solutions onto the solid adsorbent date pits has been investigated in a batch system. The characterization and adsorption efficiency for methylene blue was evaluated using date pits. Fourier Transform Infra-Red, Scanning Electron Microscope, Brunauer-Emmett-Teller analysis were performed to determine the characteristics of the material. The effect of contact time, initial dye concentration, adsorbent dosage, temperature, and solution pH were investigated. The adsorption was found to increase with increasing time, decreasing concentration of dye, decreasing temperature and increasing dosage up to equilibrium values which was 20 min, 25°C, and 0.1 g adsorbent, respectively. The adsorption was favorable at high and low pH (pH 3, pH 7). The adsorption equilibrium data were best fitted by Freundlich isotherm. The adsorption kinetics was found to follow the pseudo second order kinetic model. Thermodynamic parameters such as free energy, enthalpy, and entropy were calculated and found to be -4.6 kJ/mole, -7.9 kJ/mole, and -11.8 kJ/mole, respectively. The thermodynamic parameters of the uptake of methylene blue onto the date pits indicated that, the process is exothermic and proceeds spontaneously at low temperature. A single stage batch adsorber was designed for adsorption of methylene blue by Date Pits based on optimum isotherm.

Sorption profile and chromatographic separation of uranium (VI) ions from aqueous solutions onto date pits solid sorbent.

The retention profile of uranium (VI) as uranyl ions (UO(2)(2+)) from the aqueous media onto the solid sorbent date pits has been investigated. The sorption of UO(2)(2+) ions onto the date pits was achieved quantitatively (98+/-3.4%, n=5) after 15 min of shaking at pH 6-7. The sorption of UO(2)(2+) onto the used sorbent was found fast, followed by a first order rate equation with an overall rate constant, k of 4.8+/-0.05 s(-1). The sorption data were explained in a manner consistent with a "solvent extraction" mechanism. The sorption data were also subjected to Freundlich isotherm model over a wide range of equilibrium concentration (1-20 microgmL(-1)) of UO(2)(2+). The results revealed that, a "dual-mode" of sorption mechanism involving absorption related to "solvent extraction" and an added component for "surface adsorption" is most likely operated simultaneously for uranyl ions uptaking the solid sorbent. The thermodynamic parameters (-DeltaH, DeltaS and DeltaG) of the uranyl ions uptake onto the date pits indicated that, the process is endothermic and proceeds spontaneously. The interference of some diverse ions on the sorption UO(2)(2+) from the aqueous media onto the date pits packed column was critically investigated and the data revealed quantitative collection of UO(2)(2+) at 5 mLmin(-1) flow rate. The retained UO(2)(2+) was recovered quantitatively with HCl (3.0 molL(-1)) from the column at 5 mLmin(-1) flow rate. The mode of binding of the date pits with UO(2)(2+) was determined from the IR spectral date bits before and after extraction of uranium (VI). The height equivalent (HETP) and the number (N) of theoretical plates of the date pits packed column were determined from the chromatograms. Complete retention and recovery of UO(2)(2+) spiked to wastewater samples by the date pits packed column was successfully achieved. The capacity of the used sorbent towards retention of uranium (VI) from aqueous solutions was much better than the most common sorbents.