Acceleration of radiative recombination for efficient perovskite LEDs.

The increasing demands for more efficient and brighter thin-film light-emitting diodes (LEDs) in flat-panel display and solid-state lighting applications have promoted research into three-dimensional (3D) perovskites. These materials exhibit high charge mobilities and low quantum efficiency droop1-6, making them promising candidates for achieving efficient LEDs with enhanced brightness. To improve the efficiency of LEDs, it is crucial to minimize nonradiative recombination while promoting radiative recombination. Various passivation strategies have been used to reduce defect densities in 3D perovskite films, approaching levels close to those of single crystals3. However, the slow radiative (bimolecular) recombination has limited the photoluminescence quantum efficiencies (PLQEs) of 3D perovskites to less than 80% (refs. 1,3), resulting in external quantum efficiencies (EQEs) of LED devices of less than 25%. Here we present a dual-additive crystallization method that enables the formation of highly efficient 3D perovskites, achieving an exceptional PLQE of 96%. This approach promotes the formation of tetragonal FAPbI3 perovskite, known for its high exciton binding energy, which effectively accelerates the radiative recombination. As a result, we achieve perovskite LEDs with a record peak EQE of 32.0%, with the efficiency remaining greater than 30.0% even at a high current density of 100 mA cm-2. These findings provide valuable insights for advancing the development of high-efficiency and high-brightness perovskite LEDs.

Enhancing the Performance of Perovskite Light-Emitting Diodes via Synergistic Effect of Defect Passivation and Dielectric Screening.

Metal halide perovskites, particularly the quasi-two-dimensional perovskite subclass, have exhibited considerable potential for next-generation electroluminescent materials for lighting and display. Nevertheless, the presence of defects within these perovskites has a substantial influence on the emission efficiency and durability of the devices. In this study, we revealed a synergistic passivation mechanism on perovskite films by using a dual-functional compound of potassium bromide. The dual functional potassium bromide on the one hand can passivate the defects of halide vacancies with bromine anions and, on the other hand, can screen the charged defects at the grain boundaries with potassium cations. This approach effectively reduces the probability of carriers quenching resulting from charged defects capture and consequently enhances the radiative recombination efficiency of perovskite thin films, leading to a significant enhancement of photoluminescence quantum yield to near-unity values (95%). Meanwhile, the potassium bromide treatment promoted the growth of homogeneous and smooth film, facilitating the charge carrier injection in the devices. Consequently, the perovskite light-emitting diodes based on this strategy achieve a maximum external quantum efficiency of ~ 21% and maximum luminance of ~ 60,000 cd m-2. This work provides a deeper insight into the passivation mechanism of ionic compound additives in perovskite with the solution method.

Fault Diagnosis Method for Rolling Bearings Based on Grey Relation Degree.

Aiming at the difficult problem of extracting fault characteristics and the low accuracy of fault diagnosis throughout the full life cycle of rolling bearings, a fault diagnosis method for rolling bearings based on grey relation degree is proposed in this paper. Firstly, the subtraction-average-based optimizer is used to optimize the parameters of the variational mode decomposition algorithm. Secondly, the vibration signals of bearings are decomposed by using the optimized results, and the feature vector of the intrinsic mode function component corresponding to the minimum envelope entropy is extracted. Finally, the grey proximity and similarity relation degree based on standard distance entropy are weighted to calculate the grey comprehensive relation degree between the feature vector of vibration signals and each standard state. By comparing the results, the diagnosis of different fault states and degrees of rolling bearings is realized. The XJTU-SY dataset was used for experimentation, and the results show that the proposed method achieves a diagnostic accuracy of 95.24% and has better diagnosis performance compared to various algorithms. It provides a reference for the fault diagnosis of rolling bearings throughout the full life cycle.

Chirality Induction and Memory of Pillar[4]arene[1]quinone Derivatives in Visible-Light Range.

Pillar[4]arene[1]quinone derivatives (PQXs) were synthesized by the oxidation of pillar[5]arenes, which exhibited notable charge transfer (CT) transitions at approximately 485 nm. Successful chiral resolution of two pairs of enantiomeric conformers was achieved. Despite reduced binding affinity, PQXs demonstrated slower racemization kinetics. Visible-light chiroptical induction with a significant dissymmetry factor was attained by complexing PQXs with a chiral guest. The induced enantiomeric excess could be maintained through competitive binding with an achiral guest, offering a promising strategy for chiral sensing and memory.

Persistent Charging of CsPbBr3 Perovskite Nanocrystals Confined in Glass Matrix.

Manipulation of persistent charges in semiconductor nanostructure is the key point to obtain quantum bits towards the application of quantum memory and information devices. However, realizing persistent charge storage in semiconductor nano-systems is still very challenge due to the disturbance from crystal defects and environment conditions. Herein, the two-photon persistent charging induced long-lasting afterglow and charged exciton formation are observed in CsPbBr3 perovskite nanocrystals (NCs) confined in glass host with effective lifetime surpassing one second, where the glass inclosure provides effective protection. A method combining the femtosecond and second time-resolved transient absorption spectroscopy is explored to determine the persistent charging possibility of perovskite NCs unambiguously. Meanwhile, with temperature-dependent spectroscopy, the underlying mechanism of this persistent charging is elucidated. A two-channel carrier transfer model is proposed involving athermal quantum tunneling and slower thermal-assisted channel. On this basis, two different information storage devices are demonstrated with the memory time exceeding two hours under low-temperature condition. These results provide a new strategy to realize persistent charging in perovskite NCs and deepen the understanding of the underlying carrier kinetics, which may pave an alternative way towards novel information memory and optical data storage applications.

Layered energy-saving speed planning and control method for electric vehicle on continuous signal lights road.

Emergency start-stop in front of signal lights is one of the main reasons for additional energy consumption and ride discomfort of Electric Vehicle (EV). Existing research on this issue rarely takes into account both energy consumption and ride comfort. Therefore, the layered energy-saving speed planning and control method is proposed. The upper is the layer of energy-saving speed planning. This layer reduces energy consumption of EV by reducing the number of stops on continuous signal lights road and minimizing the range of speed change. On this basis, the sinusoidal variable speed curve is used to smooth the acceleration process to improve ride comfort. Finally, the energy-saving speed considering ride comfort is obtained. This layer makes up for the issue that existing research rarely takes into account both energy consumption and ride comfort of EV, and is an extension and innovation of existing research. The lower is the layer of Model Predictive Controller (MPC)-based speed control. Based on the longitudinal dynamics model of EV, the MPC-based speed controller is established to control EV to track the energy-saving speed. The controller is easy to understand and implement, and it is also suitable for other research on EV, which has certain application value. The simulation results show that under various working conditions, the maximum energy consumption of EV passing through continuous signal lights road without stopping is 604.29 kJ/km, and the minimum is 244.76 kJ/km. The energy consumption is lower than that of actual road test, and it can be saved by 23.18 % compared with the method in the same field. The maximum Root Mean Square of accelerations (RMSa) is 0.25 m/s2, and the minimum is 0.10 m/s2. The values of RMSa above are lower than 0.315 m/s2, which indicates that the ride comfort is good. The utilized method can reduce energy consumption of EV, improve its range and ride comfort, which has important reference significance for promoting the development of EV.

A Preliminary Study of the Impacts of Duckweed Coverage during Rice Growth on Grain Yield and Quality.

The overuse and misuse of fertilizers have been causing duckweed outbreaks in irrigation ditches and paddy fields in many rice-growing areas. However, how duckweed coverage in a paddy field affects the rice yield and grain quality is under debate because duckweed may act as either a weed, competing with rice for mineral nutrients, or a "nutrient buffer", providing significant ecological and economic benefits. To understand the effects of duckweed coverage throughout rice growth on the yield and quality of rice grains, an experiment with three Japonica rice cultivars was conducted with fertile lotus-pond bottom soil as a growth medium to provide sufficient mineral nutrients for both the duckweed and rice. Averaged across three rice cultivars, duckweed coverage decreased the panicle density but increased the spikelet density and grain weight, resulting in no significant change in the rice yield. Duckweed coverage had no impact on the processing and appearance quality in general, but significant duckweed-by-cultivar interactions were detected in the head rice percentage and grain chalkiness, indicating different sensitivities of different cultivars in response to the duckweed treatment. The decrease in breakdown and increase in setback values in the rapid visco analyzer (RVA) profile of rice flour suggested that duckweed coverage during rice growth worsened the cooking quality of the rice. However, no significant change in the palatability of the cooked rice was found. The most profound change induced by the duckweed was the nutritional quality; duckweed coverage increased the protein concentration but decreased the concentrations of Mg, Mn, Cu, and Zn in rice grains. This preliminary study suggested that duckweed coverage during rice growth has profound effects on the rice nutrient uptake and grain nutritional quality under the circumstances, and further research on the responses of the rice quality to the duckweed coverage in paddy fields in multiple locations and years is needed.

Passivating Defects at the Bottom Interface of Perovskite by Ethylammonium to Improve the Performance of Perovskite Solar Cells.

The interface of perovskite solar cells (PSCs) plays a significant role in influencing their performance, yet there is still scarce research focusing on their difficult-to-expose bottom interfaces. Herein, ethylammonium bromide (EABr) is introduced into the bottom interface and its passivation effects are studied directly. First, EABr can improve substrate wettability, which is beneficial for the perovskite-film deposition. By lifting off the perovskite film spontaneously from the substrate, it is found that EABr can significantly reduce the amount of unreacted PbI2 at the bottom interface. These PbI2 crystals have been recently identified as a major defect source and degradation site for perovskite film. Meanwhile, EABr also lifts the valence band maximum at the bottom side of perovskite from -5.38 to -5.09 eV, facilitating better hole transfer. Such a improvement is also verified by the study of charge carrier dynamics. Through introducing EABr, all photovoltaic parameters of the inverted PSCs are improved, and their power conversion efficiency (PCE) increases from 20.41% to 21.06%. The study highlights the importance of direct characterization of the bottom interface for a better passivation effect.

Traditional Chinese Medicine Formula Jian Pi Tiao Gan Yin Reduces Obesity in Mice by Modulating the Gut Microbiota and Fecal Metabolism.

The current study employed the high-fat diet (HFD) induced murine model to assess the relationship between the effect of Jian Pi Tiao Gan Yin (JPTGY) and the alterations of gut microbiota and fecal metabolism. C57BL/6 mice were used to establish an animal model of obesity via HFD induce. Serum biochemical indicators of lipid metabolism were used to evaluate the pharmacodynamics of JPTGY in obese mice. Bacterial communities and metabolites in the feces specimens from the controls, the Group HFD, and the JPTGY-exposed corpulency group were studied by 16s rDNA genetic sequence in combination with liquid chromatography-mass spectrometry (LC-MS) based untargeted fecal metabolomics techniques. Results revealed that JPTGY significantly decreased the levels of total cholesterol (TC), triglyceride (TG), low-density lipoprotein cholesterol (LDL-C), and elevated high-density lipoprotein cholesterol (HDL-C). Moreover, JPTGY could up-regulate the abundance and diversity of fecal microbiota, which was characterized by the higher phylum of proteobacteria. Consistently, at the genus levels, JPTGY supplementation induced enrichments in Lachnospiraceae NK4A136 group, Oscillibacter, Turicibacter, Clostridium sensu stricto 1, and Intestinimonas, which were intimately related to 14 pivotal fecal metabolins in respond to JPTGY therapy were determined. What is more, metabolomics further analyses show that the therapeutic effect of JPTGY for obesity involves linoleic acid (LA) metabolism paths, alpha-linolenic acid (ALA) metabolism paths, glycerophospholipid metabolism paths, arachidonic acid (AA) metabolism paths, and pyrimidine metabolism paths, which implied the potential mechanism of JPTGY in treating obesity. It was concluded that the linking of corpulency phenotypes with intestinal flora and fecal metabolins unveils the latent causal link of JPTGY in the treatment of hyperlipidemia and obesity.

High-Yield Production of Lignin-Derived Functional Carbon Nanosheet for Dye Adsorption.

In this article, we report the preparation of lignin-derived carbon nanosheet (L-CNS) by direct thermal treatment of lignin without activation operation and the functions of the L-CNS as an adsorbent for rhodamine dye. The L-CNSs are fabricated by freeze-drying (FD) methods of lignin followed by high-temperature carbonization. It is found that lower frozen temperature in FD or lower concentration of lignin aqueous solution renders L-CNSs' more porous morphology and higher specific surface area (SSA), allowing a promising application of the L-CNSs as an efficient adsorbent for organic pollutants. In particular, the alkaline hydroxide catalyst helps to increase the SSA of carbon products, leading to a further improved adsorption capacity. On the other hand, p-toluenesulfonic acid (TsOH) catalyzed pyrolysis, which dramatically increased the L-CNS product yield, and provided a high-yield approach for the production of pollutant absorbent.

Catalytic Activity of Ag-Co-MCM-41 for Liquid-Phase Selective Oxidation of Styrene to Benzaldehyde.

A series of Ag-Co-MCM-41 with different metal loadings have been synthesized through the hydrothermal method. All the prepared catalysts were characterized by N2 adsorption-desorption, X-ray diffraction analysis, transmission electron microscopy. The results revealed that the structure of MCM-41 was well preserved and Ag and Co have been introduced successfully into the mesoporous channels of MCM-41. The liquid-phase catalytic oxidation of styrene on these catalysts was investigated using H2O2 as an oxidizing agent and acetone as a solvent in thermostatic water bath. The influence of metal loading, the catalyst dose, temperature, time and styrene/oxidant molar ratio on the conversion of styrene and yield and selectivity of benzaldehyde was investigated. Also, the reusability of the catalysts was evaluated.

[Clinical Observation of the Proprioceptive Sensibility Reflexotherapy by Tendon Acupuncture at Trigger Points for Cervical Vertigo].

OBJECTIVE: To evaluate the efficacy of the proprioceptive sensibility reflexotherapy by tendon acupuncture needling at trigger points for patients with proprioceptive disorder of cervical vertigo. METHODS: Seventy-nine patients with proprioceptive disorder of cervical vertigo were randomly assigned into a treatment group (42 cases) and a control group (37 cases). Patients in the treatment group received the proprioceptive sensibility reflexotherapy with tendon acupuncture at trigger points in the neck. And those in the control group were given traditional traction, massage and intermediate frequency electro therapy. All the treatment was given for 2 courses, once a day and 10 days as a course. The cervical vertigo symptom and function, the joint position error (JPE) and stability index (ST) before and after treatment were observed in the two groups and the effects were evaluated. RESULTS: The cervical vertigo symptom and function were improved, JPE and ST decreased after treatment in the two groups (all P<0.05), with better results in the treatment group (all P<0.05). CONCLUSIONS: The proprioceptive sensibility reflexotherapy with tendon acupuncture at trigger points is effective for proprioceptive disorder of cervical vertigo.

Sub-pm linewidth nanosecond Nd:GYSGG laser at 1336.6 nm.

We demonstrate a sub-pm linewidth acousto-optic (AO) Q-switched nanosecond Nd:GYSGG ring laser at 1336.6 nm side-pumped by 808-nm quasi-continuous wave (QCW) diode lasers for the first time. With incident pulse energy of 4.23 J at 10 Hz, a maximum output macropulse energy of 36.7 mJ at 1336.6 nm with linewidth of less than 0.85 pm and a micropulse width of 300 ns was obtained at a repetition rate of 80 Hz, corresponding to an average micropulse peak power of 15.3 kW. The M² factors were measured to be 1.42 and 1.10 in x and y directions, respectively. It can be tuned from 1336.576 to 1336.652 nm with a tuning resolution of 1 pm. The 1336.632 nm can be converted to deep ultraviolet (DUV) laser at 167.079 nm through its eighth harmonics, which is very useful for the ²7Al⁺ optical frequency standard.