Ultraviolet radiation oxidative stress affects eye health.

In the eye, ultraviolet radiation (UVR) is not known to contribute to visual perception but to mainly damage multiple structures. UVR carries higher energy than visible light and high dose exposure to UVR causes direct cellular damage, which has an important role in the development of cancer. This review provides an overview on the most recent knowledge on the role of UVR in oxidative stress (OS) in relation to noncancer ocular pathologies: various corneal pathologies, cataract, glaucoma and age-related macular degeneration. Possible OS signaling streams and mechanisms in the aging eye are discussed. Excessive exposure to UVR through live may seriously contribute to increase in OS of various eye tissues and thus lead to the advancement of serious ocular pathologies. Children are especially vulnerable to UVR because of their larger pupils and more transparent ocular media: up to 80% of a person's lifetime exposure to UVR is reached before the age of 18. Therefore, efficient everyday protection of the sensitive tissues of the eye by wearing of sunglasses, clear UVR-blocking spectacles or contact lenses should be considered from early age on. Many initiatives are taken worldwide to inform and raise the population's awareness about these possible UVR hazards to the eye.

Efficiency of ocular UV protection by clear lenses.

Ocular UV doses accumulate all-day, not only during periods of direct sun exposure. The UV protection efficiency of three clear lenses was evaluated experimentally, validated by simulation, and compared to non-UV protection: a first spectacle lens with a tailored UV absorber, a second spectacle lens, minimizing UV back reflections, as well as a third spectacle lens, combining both. A tailored UV-absorber efficiently reduced overall UV irradiance to 7 %, whereas reduction of back-reflections still left UV irradiance at 42 %. Thus, clear lenses with a tailored UV absorber efficiently protect the eye from UV, supplementing sun glasses wear to an all-day protection scenario.

Optical imaging of post-embryonic zebrafish using multi orientation raster scan optoacoustic mesoscopy.

Whole-body optical imaging of post-embryonic stage model organisms is a challenging and long sought-after goal. It requires a combination of high-resolution performance and high-penetration depth. Optoacoustic (photoacoustic) mesoscopy holds great promise, as it penetrates deeper than optical and optoacoustic microscopy while providing high-spatial resolution. However, optoacoustic mesoscopic techniques only offer partial visibility of oriented structures, such as blood vessels, due to a limited angular detection aperture or the use of ultrasound frequencies that yield insufficient resolution. We introduce 360° multi orientation (multi-projection) raster scan optoacoustic mesoscopy (MORSOM) based on detecting an ultra-wide frequency bandwidth (up to 160 MHz) and weighted deconvolution to synthetically enlarge the angular aperture. We report unprecedented isotropic in-plane resolution at the 9-17 µm range and improved signal to noise ratio in phantoms and opaque 21-day-old Zebrafish. We find that MORSOM performance defines a new operational specification for optoacoustic mesoscopy of adult organisms, with possible applications in the developmental biology of adulthood and aging.

Efficient free-space read-out of WGM lasers using circular micromirrors.

Lasing from whispering-gallery mode (WGM) resonators occurs omnidirectional in azimuthal plane. Most applications of WGM resonators require spectral analysis with off-chip detectors, where in-plane emission and beam divergence hinder efficient detection. We demonstrate redirecting WGM laser emission from all azimuthal angles using a circular micromirror placed around the cavity. By collecting reflections off the micromirror via free-space optics, read-out intensity improved by one order of magnitude. Blocking vertically emitted spontaneous emission and recording reflections off the micromirror only, signal-to-noise ratio improved from 4.6 dB to 15 dB. Our read-out concept may be applied to arbitrary WGM cavity geometries without deteriorating the cavity's quality factor.

Densely Packed Microgoblet Laser Pairs for Cross-Referenced Biomolecular Detection.

Microgoblet laser pairs are presented for cross-referenced on-chip biomolecular sensing. Parallel readout of the micro-lasers facilitates effective mutual filtering of highly localized refractive index and temperature fluctuations in the analyte. Cross-referenced detection of two different types of proteins and complete chemical transducer reconfiguration is demonstrated. Selective surface functionalization of the individual lasers with high spatial accuracy is achieved by aligned microcontact stamping.

Organic semiconductor distributed feedback laser pixels for lab-on-a-chip applications fabricated by laser-assisted replication.

The integration of organic semiconductor distributed feedback (DFB) laser sources into all-polymer chips is promising for biomedical or chemical analysis. However, the fabrication of DFB corrugations is often expensive and time-consuming. Here, we apply the method of laser-assisted replication using a near-infrared diode laser beam to efficiently fabricate inexpensive poly(methyl methacrylate) (PMMA) chips with spatially localized organic DFB laser pixels. This time-saving fabrication process enables a pre-defined positioning of nanoscale corrugations on the chip and a simultaneous generation of nanoscale gratings for organic edge-emitting laser pixels next to microscale waveguide structures. A single chip of size 30 mm × 30 mm can be processed within 5 min. Laser-assisted replication allows for the subsequent addition of further nanostructures without a negative impact on the existing photonic components. The minimum replication area can be defined as being as small as the diode laser beam focus spot size. To complete the fabrication process, we encapsulate the chip in PMMA using laser transmission welding.

Large-scale parallel surface functionalization of goblet-type whispering gallery mode microcavity arrays for biosensing applications.

A novel surface functionalization technique is presented for large-scale selective molecule deposition onto whispering gallery mode microgoblet cavities. The parallel technique allows damage-free individual functionalization of the cavities, arranged on-chip in densely packaged arrays. As the stamp pad a glass slide is utilized, bearing phospholipids with different functional head groups. Coated microcavities are characterized and demonstrated as biosensors.

On-chip microlasers for biomolecular detection via highly localized deposition of a multifunctional phospholipid ink.

We report on a novel approach to realize on-chip microlasers, by applying highly localized and material-saving surface functionalization of passive photonic whispering gallery mode microresonators. We apply dip-pen nanolithography on a true three-dimensional structure. We coat solely the light-guiding circumference of pre-fabricated poly(methyl methacrylate) resonators with a multifunctional molecular ink. The functionalization is performed in one single fabrication step and simultaneously provides optical gain as well as molecular binding selectivity. This allows for a direct and flexible realization of on-chip microlasers, which can be utilized as biosensors in optofluidic lab-on-a-chip applications. In a proof-of-concept we show how this highly localized molecule deposition suffices for low-threshold lasing in air and water, and demonstrate the capability of the ink-lasers as biosensors in a biotin-streptavidin binding experiment.

Pump spot size dependent lasing threshold in organic semiconductor DFB lasers fabricated via nanograting transfer.

Optically excited organic semiconductor distributed feedback (DFB) lasers enable efficient lasing in the visible spectrum. Here, we report on the rapid and parallel fabrication of DFB lasers via transferring a nanograting structure from a flexible mold onto an unstructured film of the organic gain material. This geometrically well-defined structure allows for a systematic investigation of the laser threshold behavior. The laser thresholds for these devices show a strong dependence on the pump spot diameter. This experimental finding is in good qualitative agreement with calculations based on coupled-wave theory. With further investigations on various DFB laser geometries prepared by different routes and based on different organic gain materials, we found that these findings are quite general. This is important for the comparison of threshold values of various devices characterized under different excitation areas.

Organic semiconductor distributed feedback (DFB) laser as excitation source in Raman spectroscopy.

As an application of organic semiconductor distributed feedback (DFB) lasers we demonstrate their use as excitation sources in Raman spectroscopy. We employed an efficient small molecule blend, a high quality resonator and a novel encapsulation method resulting in an improved laser output power, a reduced laser line width and an enhanced power stability. Based on theses advances, Raman spectroscopy on selected substances was enabled. Raman spectra of sulfur and cadmium sulfide are presented and compared with the ones excited by a helium-neon laser. We also fabricated a spectrally tunable organic semiconductor DFB laser to optimize the Raman signals for a given optical filter configuration.

Flexible coupling of high-Q goblet resonators for formation of tunable photonic molecules.

We report on a method for a highly flexible arrangement of polymeric high-Q whispering gallery mode resonators. Parallel on-chip fabricated goblet resonators are detached from the substrate by bonding a gold wire to the field-free center of their polymeric cavity. This enables the precise control of the resonator's spatial position. The modal spectrum of the detached resonator reveals preservation of its high optical quality. Manipulation of the resonators' position allows for designing coupled resonators geometries and tuning the coupling properties dynamically after batch fabrication. The properties of the modal spectrum evidence the successful optical coupling.

Direct laser writing for nanoporous liquid core laser sensors.

We report the fabrication of nanoporous liquid core lasers via direct laser writing based on two-photon absorption in combination with thiolene-chemistry. As gain medium Rhodamine 6G was embedded in the nanoporous polybutadiene matrix. The lasing devices with thresholds of 19 µJ/mm(2) were measured to have bulk refractive index sensitivities of 169 nm/RIU at a laser wavelength of 600 nm, demonstrating strongly increased overlap of the modes with the analyte in comparison to solid state evanescent wave sensors.

The invention of immersion ultramicroscopy in 1912-the birth of nanotechnology?

Dawn of nanotechnology: the immersion ultramicroscope was patented a century ago. When an analyte was examined with an antique instrument and with state-of-the-art technology, the historic assumptions were confirmed: the size and shape of the nanoparticles are in the same range as that described 100 years ago. The spectra of the Tyndall cones caused by the shape of the nanoparticles were also described correctly-long before electron microscopy was able to image single nanoparticles.

Diffusion driven optofluidic dye lasers encapsulated into polymer chips.

Lab-on-a-chip systems made of polymers are promising for the integration of active optical elements, enabling e.g. on-chip excitation of fluorescent markers or spectroscopy. In this work we present diffusion operation of tunable optofluidic dye lasers in a polymer foil. We demonstrate that these first order distributed feedback lasers can be operated for more than 90 min at a pulse repetition rate of 2 Hz without fluidic pumping. Ultra-high output pulse energies of more than 10 µJ and laser thresholds of 2 µJ are achieved for resonator lengths of 3 mm. By introducing comparatively large on-chip dye solution reservoirs, the required exchange of dye molecules is accomplished solely by diffusion. Polymer chips the size of a microscope cover slip (18 × 18 mm(2)) were fabricated in batches on a wafer using a commercially available polymer (TOPAS(®) Cyclic Olefin Copolymer). Thermal imprinting of micro- and nanoscale structures into 100 µm foils simultaneously defines photonic resonators, liquid-core waveguides, and fluidic reservoirs. Subsequently, the fluidic structures are sealed with another 220 µm foil by thermal bonding. Tunability of laser output wavelengths over a spectral range of 24 nm on a single chip is accomplished by varying the laser grating period in steps of 2 nm. Low-cost manufacturing suitable for mass production, wide laser tunability, ultra-high output pulse energies, and long operation times without external fluidic pumping make these on-chip lasers suitable for a wide range of lab-on-a-chip applications, e.g. on-chip spectroscopy, biosensing, excitation of fluorescent markers, or surface enhanced Raman spectroscopy (SERS).

Design of plasmonic grating structures towards optimum signal discrimination for biosensing applications.

Sensors based on surface plasmon resonances (SPRs) have proven themselves as promising devices for molecular investigations - still there is potential to determine the geometrical parameter set for optimal sensing performance. Here we propose a comprehensive design rule for one-dimensional plasmonic grating structures. We present an analytical approach, which allows for estimation of the grating parameters for best SPR coupling efficiency for any geometry and design wavelength. On the example of sinusoidal gratings, we expand this solution and discuss numerically and experimentally, how the grating modulation depth can be refined to achieve optimal signal resolution. Finally, we propose a benchmark factor to assess the sensor performance, which can be applied to any sensing scheme utilizing resonances, allowing for comparison of different technological platforms.

Continuously tunable solution-processed organic semiconductor DFB lasers pumped by laser diode.

The fabrication and characterization of continuously tunable, solution-processed distributed feedback (DFB) lasers in the visible regime is reported. Continuous thin film thickness gradients were achieved by means of horizontal dipping of several conjugated polymer and blended small molecule solutions on cm-scale surface gratings of different periods. We report optically pumped continuously tunable laser emission of 13 nm in the blue, 16 nm in the green and 19 nm in the red spectral region on a single chip respectively. Tuning behavior can be described with the Bragg-equation and the measured thickness profile. The laser threshold is low enough that inexpensive laser diodes can be used as pump sources.

Direct laser writing for active and passive high-Q polymer microdisks on silicon.

We report the fabrication of high-Q polymeric microdisks on silicon via direct laser writing utilizing two-photon absorption induced polymerization. The quality factors of the passive cavities are above 10(6) in the 1300 nm wavelength region. The flexible three-dimensional (3D) lithography method allows for the fabrication of different cavity thicknesses on the same substrate, useful for rapid prototyping of active and passive optical microcavities. Microdisk lasers are realized by doping the resist with dye, resulting in laser emission at visible wavelengths.

Plastic lab-on-a-chip for fluorescence excitation with integrated organic semiconductor lasers.

Laser light excitation of fluorescent markers offers highly sensitive and specific analysis for bio-medical or chemical analysis. To profit from these advantages for applications in the field or at the point-of-care, a plastic lab-on-a-chip with integrated organic semiconductor lasers is presented here. First order distributed feedback lasers based on the organic semiconductor tris(8-hydroxyquinoline) aluminum (Alq3) doped with the laser dye 4-dicyanomethylene-2-methyl-6-(p-dimethylaminostyril)-4H-pyrane (DCM), deep ultraviolet induced waveguides, and a nanostructured microfluidic channel are integrated into a poly(methyl methacrylate) (PMMA) substrate. A simple and parallel fabrication process is used comprising thermal imprint, DUV exposure, evaporation of the laser material, and sealing by thermal bonding. The excitation of two fluorescent marker model systems including labeled antibodies with light emitted by integrated lasers is demonstrated.