Impacts of Contracted Endodontic Cavities on Primary Root Canal Curvature Parameters in Mandibular Molars.

INTRODUCTION: The purpose of this study was to provide information regarding the debate on contracted endodontic cavities (CECs); their impacts on angle, location, and radius of the primary canal curvature (PCC) were assessed in type IV mesial root canals of mandibular molars at different stages of instrumentation. Impacts on treatment time were also assessed. METHODS: Twenty-four teeth were matched by radiographic and micro-computed tomographic criteria and accessed via CECs (CEC, n = 12) or nonextended traditional endodontic cavities (TECs, n = 12). PCC parameters were radiographically determined using a repositioning apparatus before glide path preparation (PI), after glide path preparation, and after final instrumentation (FI). Instrumentation was performed with PathFiles (13/.02, 16/.02; Dentsply Maillefer, Ballaigues, Switzerland) and ProFile Vortex files (Dentsply Tulsa Dental Specialties, Tulsa, OK) to size 30/.04 at the working length under copious irrigation. Changes in PCC were measured with ImageJ (National Institutes of Health, Bethesda, MD). The instrumentation time was recorded. Data were analyzed with 2-way repeated measures analysis of variance (α < .05) and Tukey honest significant difference tests. RESULTS: A significant (P < .001) decrease in the mean angle and increase in the mean radius were detected at each instrumentation stage for both CECs (angle: PI = 42.57°± 8.00°, FI = 32.61°± 5.17°; radius: PI = 6.48 ± 1.81 mm, FI = 10.55 ± 1.48 mm) and TECs (angle: PI = 38.80°± 7.15°, FI = 30.08°± 6.99°; radius: PI = 6.97 ± 2.31 mm, FI = 11.01 ± 2.20 mm). PCC location shifted apically (P < .001). Changes in PCC parameters did not differ significantly between CECs and TECs (P > .05). The treatment time was significantly (P < .0001) longer for CECs (83.17 ± 6.71 minutes) than for TECs (33.18 ± 9.20 minutes). CONCLUSIONS: Instrumentation of curved mesial canals reduced the severity and abruptness of PCC and shifted the PCC location apically similarly in mandibular molars with CECs and those with nonextended TECs. The extended treatment time with CEC merits consideration when debating CECs versus TECs.

Effect of access design on intracoronal bleaching of endodontically treated teeth: An ex vivo study.

OBJECTIVES: To determine the effect of access design on intracoronal bleaching with 35% carbamide peroxide on discolored teeth. MATERIALS AND METHODS: Forty-two intact maxillary central incisors were selected, sectioned and artificially stained using whole blood. Color measurements were performed with a spectrophotometer: before staining (T1), after staining (T2), at 7 (T3), and 14 (T4) days postbleaching. After T1, specimens were stratified and divided randomly into two groups according to access design (N = 20): G1: contracted endodontic cavity (CEC) access performed with a #848-010M bur and G2: traditional endodontic cavity (TEC) access done with a #1157 bur. Canals were obturated, a cervical barrier was placed and 35% carbamide peroxide was sealed in the chamber for 7 days and replaced at 7 days for an additional 7 days. Data were collected based on CIELAB-CIE1976 (L* a* b* ) system. Repeated measures SNK anova was used to evaluate the effects of access design and time on color change (ΔE* ) and luminosity (L* ) (α < 0.05). RESULTS: For CEC, L* was significantly different at all times points (P < .05). For TEC, L* values were significantly different at all time points (P < .05) except for T0 and T4, which were similar (P > .05). There was no statistical difference for ΔE* between CEC and TEC designs at any time point (P > .05). CONCLUSIONS: In general, teeth accessed with CEC or TEC designs showed statistically similar bleaching when using 35% carbamide peroxide. However, lightness values were only reestablished with bleaching through a TEC access design. CLINICAL SIGNIFICANCE: Despite the current trend to conserve tooth structure when performing endodontic access cavities, the use of conservative access designs for bleaching discolored maxillary central incisors affected the acceptability threshold when compared with a traditional access design. These smaller accesses might not be an alternative treatment option when internal bleaching in the esthetic zone is anticipated.

Removal of calcium hydroxide from Weine Type II systems using photon-induced photoacoustic streaming, passive ultrasonic, and needle irrigation: a microcomputed tomography study

ABSTRACT Objective This study compared the effectiveness of Er:YAG laser-activated irrigation (PIPS), passive ultrasonic irrigation (PUI) with EndoUltra and standard needle irrigation (SNI) in the removal of calcium hydroxide [Ca(OH)2] from the mesial roots of Weine Type II mandibular molars. Material and Methods Thirty mandibular molars were screened by µCT for the presence of mesial roots with complex intra-canal anatomy and a common apical foramen. The teeth were enlarged to a standardized 25/.06 preparation and filled with Ca(OH)2 paste. Specimens were divided into three groups (n=10) according to the technique used for Ca(OH)2 removal: PIPS, at 15 Hz and 20 mJ using a 9 mm long, 600 µm diameter tip; PUI using a 15/.02 tip; and SNI (30 Ga. side-vented needle). Equal volumes of 8.25% NaOCl and 17% EDTA were used in all groups. µCT was used to measure the initial amount of Ca(OH)2 present and to assess the residual volume of Ca(OH)2 following each irrigation protocol. Data were analyzed using Tukey HSD and Kruskal-Wallis tests (α=5%). Results The mean volume of Ca(OH)2 before removal was significantly higher in the coronal third than in the middle and apical third (p<0.001). Ca(OH)2 was similarly removed from the coronal and middle thirds with the three methods used (p>0.05). PIPS (median 0%; IQR: 0-0) showed significant higher Ca(OH)2 removal in the apical third than PUI (median 100%, IQR: 85-100) and SNI (median 47%; IQR: 16-72) (p<0.001). Conclusions PIPS laser-activation was more effective for the removal of Ca(OH)2 from mesial roots of mandibular molars with Weine Type II canal configurations than PUI with EndoUltra and SNI.

Effect of Instrument Design and Access Outlines on the Removal of Root Canal Obturation Materials in Oval-shaped Canals.

INTRODUCTION: The aim of this study was to compare the effectiveness of TRUShape (TS) instruments with ProFile Vortex Blue (VB) instruments for the removal of obturation materials during retreatment of single-canal mandibular premolars performed through 2 access outlines. METHODS: Initial root canal treatment was completed through a contracted endodontic cavity (CEC) design. Canals were instrumented to an F2 ProTaper instrument, obturated with warm lateral condensation of gutta-percha with AH Plus sealer, and allowed to set for 30 days at 37°C and 100% humidity. For retreatment, specimens were divided into 2 groups (n = 24) on the basis of access outline, CEC or traditional endodontic cavity (TEC). Retreatment was initiated by using ProTaper Retreatment instruments (D1-D3). Specimens were then stratified, further divided (n = 12), and reinstrumented up to TS 40 .06v or 40 .06 VB. Irrigation was performed by using 8.25% NaOCl and QMix 2in1. Retreatment time was recorded. Teeth were sectioned and photographed, and the percentage of remaining obturation materials was measured. Data were analyzed with Kruskal-Wallis analysis of variance for two-factor tests (α < 0.05). RESULTS: The interaction between access design and instrument type showed that the combination of CEC-VB presented significantly higher amounts of remaining obturation materials on the canal surface when compared with TEC-VB, CEC-TS, and TEC-TS (P ≤ .05). None of these other combinations were different from each other (P > .05). Significantly more time was required for retreatment with CEC-TS (27.68 ± 1.4 minutes) than the other groups (P < .05). CONCLUSIONS: Neither retreatment protocol was able to completely eliminate all obturation materials from the root canal surface of mandibular premolars. However, in the presence of a CEC access design, using TS instruments removed more obturating material in single-rooted, oval-shaped canals.

Removal of calcium hydroxide from Weine Type II systems using photon-induced photoacoustic streaming, passive ultrasonic, and needle irrigation: a microcomputed tomography study.

OBJECTIVE: This study compared the effectiveness of Er:YAG laser-activated irrigation (PIPS), passive ultrasonic irrigation (PUI) with EndoUltra and standard needle irrigation (SNI) in the removal of calcium hydroxide [Ca(OH)2] from the mesial roots of Weine Type II mandibular molars. MATERIAL AND METHODS: Thirty mandibular molars were screened by µCT for the presence of mesial roots with complex intra-canal anatomy and a common apical foramen. The teeth were enlarged to a standardized 25/.06 preparation and filled with Ca(OH)2 paste. Specimens were divided into three groups (n=10) according to the technique used for Ca(OH)2 removal: PIPS, at 15 Hz and 20 mJ using a 9 mm long, 600 µm diameter tip; PUI using a 15/.02 tip; and SNI (30 Ga. side-vented needle). Equal volumes of 8.25% NaOCl and 17% EDTA were used in all groups. µCT was used to measure the initial amount of Ca(OH)2 present and to assess the residual volume of Ca(OH)2 following each irrigation protocol. Data were analyzed using Tukey HSD and Kruskal-Wallis tests (α=5%). RESULTS: The mean volume of Ca(OH)2 before removal was significantly higher in the coronal third than in the middle and apical third (p<0.001). Ca(OH)2 was similarly removed from the coronal and middle thirds with the three methods used (p>0.05). PIPS (median 0%; IQR: 0-0) showed significant higher Ca(OH)2 removal in the apical third than PUI (median 100%, IQR: 85-100) and SNI (median 47%; IQR: 16-72) (p<0.001). CONCLUSIONS: PIPS laser-activation was more effective for the removal of Ca(OH)2 from mesial roots of mandibular molars with Weine Type II canal configurations than PUI with EndoUltra and SNI.

Interventions for treating traumatised ankylosed permanent front teeth.

BACKGROUND: Teeth that have suffered trauma can fuse to the surrounding bone in a process called dental ankylosis. Ankylosed permanent front teeth fail to erupt during facial growth and can become displaced, thus resulting in functional and aesthetic problems. Dental ankylosis is also associated with root resorption, which may eventually lead to the loss of affected teeth. Different interventions for the management of ankylosed permanent front teeth have been described, but it is unclear which are the most effective. OBJECTIVES: To evaluate the effectiveness of any intervention that can be used in the treatment of ankylosed permanent front teeth. SEARCH METHODS: The following electronic databases were searched: the Cochrane Oral Health Group Trials Register (to 3 August 2015), the Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library, 2015, Issue 7), MEDLINE via OVID (1946 to 3 August 2015), EMBASE via OVID (1980 to 3 August 2015) and LILACS via BIREME (1982 to 3 August 2015). We searched the US National Institutes of Health Trials Register (http://clinicaltrials.gov) and the WHO Clinical Trials Registry Platform for ongoing trials. No restrictions were placed on the language or date of publication when searching the electronic databases. SELECTION CRITERIA: We included randomised controlled trials (RCTs) comparing any intervention for treating displaced ankylosed permanent front teeth in individuals of any age. Treatments could be compared with one another, with placebo or with no treatment. DATA COLLECTION AND ANALYSIS: Two independent review authors screened studies independently. Full papers were obtained for potentially relevant trials. Although no study was included, the authors had planned to extract data independently and to analyse the data according to the Cochrane Handbook for Systematic Reviews of Interventions. MAIN RESULTS: No randomised controlled trials that met the inclusion criteria were identified. AUTHORS' CONCLUSIONS: We were unable to identify any reports of randomised controlled trials regarding the efficacy of different treatment options for ankylosed permanent front teeth. The lack of high level evidence for the management of this health problem emphasises the need for well designed clinical trials on this topic, which conform to the CONSORT statement (www.consort-statement.org/).

Interventions for the management of external root resorption.

BACKGROUND: External root resorption is a pathological process, which tends to occur following a wide range of mechanical or chemical stimuli such as infection, pressure, trauma or orthodontic tooth movement. Although it is predominantly detected by radiography, in some cases root resorption may be identified by clinical symptoms such as pain, swelling and mobility of the tooth. Treatment alternatives are case-dependent and aim to address the cause of the resorption and aid the regeneration of the resorptive lesion. OBJECTIVES: To evaluate the effectiveness of any interventions that can be used in the management of external root resorption in permanent teeth. SEARCH METHODS: The following electronic databases were searched: the Cochrane Oral Health Group Trials Register (to 14 October 2015), the Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library, 2015, Issue 9), MEDLINE via OVID (1946 to 14 October 2015) and EMBASE via OVID (1980 to 14 October 2015). We searched the US National Institutes of Health Trials Register (http://clinicaltrials.gov) and the WHO Clinical Trials Registry Platform for ongoing trials. No restrictions were placed on the language or date of publication when searching the electronic databases. SELECTION CRITERIA: We included randomised controlled trials of permanent teeth with any type of external root resorption, which has been confirmed by clinical and radiological examination, comparing one type of intervention (root canal medications and canal filling, splinting or extraction of teeth or the surgical removal of any relevant pathology) with another, or with placebo or no treatment. DATA COLLECTION AND ANALYSIS: Two review authors screened search records independently. Full papers were obtained for potentially relevant trials. If data had been extracted, the statistical guidelines set out in the Cochrane Handbook would have been followed. MAIN RESULTS: No randomised controlled trials that met the inclusion criteria were identified. However, we identified one ongoing study that is potentially relevant to this review and will be assessed when it is published. AUTHORS' CONCLUSIONS: We were unable to identify any reports of randomised controlled trials regarding the efficacy of different interventions for the management of external root resorption. In view of the lack of reliable evidence on this topic, clinicians must decide on the most appropriate means of managing this condition according to their clinical experience with regard to patient-related factors. There is a need for well designed and conducted clinical trials on this topic, which conform to the CONSORT statement (www.consort-statement.org/).

Micro-Computed Tomographic Evaluation of the Influence of Root Canal System Landmarks on Access Outline Forms and Canal Curvatures in Mandibular Molars.

INTRODUCTION: This study investigated the influence of anatomic root canal system landmarks on access outline forms of mandibular molars and correlated these to the theoretical distance of orifice relocation and changes in canal primary curvature. METHODS: Thirty relatively calcified human mandibular molars were selected and examined by micro-computed tomographic imaging. Three-dimensional volume reconstructions were made, root canal system landmarks identified, and plotted: canal orifices, canal position at the furcation level, and pulp horn location. Each landmark was separately projected onto the occlusal surface, and 3 access designs were respectively proposed: (1) minimally invasive, (2) straight-line furcation, and (3) straight-line radicular. For each access design, the theoretical distance of orifice relocation and canal primary curvature were determined. Data were submitted to 2-way repeated measures analysis of variance (α < 0.05). RESULTS: The orifice relocation distance required to obtain each type of access outline was greater for radicular-based accesses (0.97 ± 0.32 mm) than for furcation accesses (0.52 ± 0.30 mm, P < .001) and resulted in a greater change in canal primary curvature (P < .001; 15.9° ± 4.6° and 9.4° ± 4.3°, respectively). The canal primary curvature for each access outline type was statistically different from each other (P < .0001), whereas the minimally invasive access showed the highest mean angle (40.1° ± 8.4°) followed by the straight-line furcation (30.7° ± 7.5°) and the straight-line radicular accesses (24.2° ± 8.4°). CONCLUSIONS: The use of different landmarks to establish access outline designs affected the primary angle of curvature in relatively calcified mandibular molars.

Influence of the bleaching agent and adhesive system on the bond strength of the restorative material to intracoronary dentin

Introduction: The bond strength of dentin bleached with high concentrated agents can be reestablished if the appropriate restorative material is selected. Objective:The aim of this study was to evaluate the influence of bleaching agents and adhesive system on bond strength of restorative material to intracoronary dentin. Material and methods: 60 fragments of intracoronary dentin (25 mm2) were embedded in acrylic resin and divided into 3 groups (n = 10): GI - not bleached (control), GII - 35% hydrogen peroxide (35HP), GIII - 38% hydrogen peroxide (38HP). The gel was applied for 10 min onto the dentin surface. This protocol was repeated three times at a single session. After 14 days, the groups were divided into subgroups according to the adhesive system used in the restoration: A - Self-etching (Clearfil SE Bond) and B - Total etching (Single Bond 2). The fragments were restored with Z100 Filtek resin using a bipartite matrix. After 24 h, the specimens were subjected to shear bond strength test. Data were analyzed by two-way ANOVA and Tukey test (p < 0.05). Results: The group bleached with 38HP (6.02 ± 3.95) had the highest bond strength to dentin, followed by 35HP (5.36 ± 3.54), and control group (3.11 ± 2.71) (p < 0.05), although without statistically significant differences. It was also verified a higher bond strength in the group restored with the self-etching adhesive system (6.60 ± 4.18) when compared to the total etching system (3.06 ± 1.57). Conclusion: When performing the restoration of teeth bleached with hydrogen peroxide at high concentrations (35% and 38%), self-etching adhesive system should be the first choice.

Influence of apical enlargement in cleaning and extrusion in canals with mild and moderate curvatures.

Optical microscopy and morphometric analysis were used in this study to evaluate, in vitro, the cleaning of the apical region in root canals with mild or moderate curvatures subjected to biomechanical preparation with a rotary system, as well as to assess the amount of extruded material to the periapical area. Lateral incisors (n = 32), 16 with curvature angles smaller or equal to 10º (GI) and 16 between 11º and 25º angles (GII) were submitted to Hero 642 rotary instrumentation with different surgical diameters: (A) 30.02 and (B) 45.02. Irrigation was performed at each change of instrument with 5 mL of ultrapure Milli-Q water and the extruded material through the apical foramen was collected. Root cross-sections were subjected to histological analysis by optical microscopy (×40) and the images were evaluated morphometrically using the Image Tool software. Quantification of the extruded material was performed by weighing after liquid evaporation. ANOVA showed no statistically significant differences (p>0.05) among the groups with respect to the procedures used to clean the apical region. Considering the amount of extruded material, the Tukey's HSD showed that canals with mild curvature prepared with the 45.02 surgical diameter showed significantly higher values (p<0.05) that those of the other groups, which were similar between themselves (p>0.05). In conclusion, the effect of cleaning the apical region did not differ in the groups, considering root curvature and the surgical diameter of instruments used for apical preparation. The amount of extruded material was greater in canals with mild curvature that were prepared with the 45.02 surgical instrument diameter.

Influence of Hero Apical instruments on cleaning ovoid-shaped root canals.

The cleaning capacity of Hero 642 nickel-titanium files, complemented by the Hero Apical instruments in flattened roots, was determined by histological analysis, considering the area of action of the instruments on the coronal walls and the presence of remaining debris. Twenty-four single-canal, human mandibular incisors were divided into three groups and prepared as follows: GI, instrumented with Hero 642 NiTi files 30/.06, 25/.06, 20/.06, 25/.06, and 30/.06; GII, instrumented as GI followed by Hero Apical size 30/.06; GIII, instrumented as GI followed by Hero Apical sizes 30/.06 and 30/.08, then returning to 30/.06 with pendulum movements. The apical thirds were prepared for histological processing, analyzed at 40× magnification and the images were examined morphometrically. Statistical analysis showed that GIII presented the best results for removing debris (5.22% ± 4.13), with more contact between the instruments and the root canal walls (19.31% ± 0.15). This differed statistically from GI (14.04% ± 4.96 debris removal, with 42.96% ± 7.11 instrument contact) and GII (12.62% ± 5.76 debris removal, with 35.01% ± 0.15 instrument contact). Root canal preparation with Hero 642, complemented by Hero Apical instruments (30/.06 and 30/.08, then re-instrumented with Hero Apical 30/.06 using pendulum movements), was more efficient for debris removal and allowed more contact of the instruments with the root canal walls. GII presented the worst results.

Influence of Hero Apical instruments on cleaning ovoid-shaped root canals

The cleaning capacity of Hero 642 nickel-titanium files, complemented by the Hero Apical instruments in flattened roots, was determined by histological analysis, considering the area of action of the instruments on the coronal walls and the presence of remaining debris. Twenty-four single-canal, human mandibular incisors were divided into three groups and prepared as follows: GI, instrumented with Hero 642 NiTi files 30/.06, 25/.06, 20/.06, 25/.06, and 30/.06; GII, instrumented as GI followed by Hero Apical size 30/.06; GIII, instrumented as GI followed by Hero Apical sizes 30/.06 and 30/.08, then returning to 30/.06 with pendulum movements. The apical thirds were prepared for histological processing, analyzed at 40× magnification and the images were examined morphometrically. Statistical analysis showed that GIII presented the best results for removing debris (5.22 percent ± 4.13), with more contact between the instruments and the root canal walls (19.31 percent ± 0.15). This differed statistically from GI (14.04 percent ± 4.96 debris removal, with 42.96 percent ± 7.11 instrument contact) and GII (12.62 percent ± 5.76 debris removal, with 35.01 percent ± 0.15 instrument contact). Root canal preparation with Hero 642, complemented by Hero Apical instruments (30/.06 and 30/.08, then re-instrumented with Hero Apical 30/.06 using pendulum movements), was more efficient for debris removal and allowed more contact of the instruments with the root canal walls. GII presented the worst results.

Influence of apical enlargement in cleaning and extrusion in canals with mild and moderate curvatures

Optical microscopy and morphometric analysis were used in this study to evaluate, in vitro, the cleaning of the apical region in root canals with mild or moderate curvatures subjected to biomechanical preparation with a rotary system, as well as to assess the amount of extruded material to the periapical area. Lateral incisors (n = 32), 16 with curvature angles smaller or equal to 10º (GI) and 16 between 11º and 25º angles (GII) were submitted to Hero 642 rotary instrumentation with different surgical diameters: (A) 30.02 and (B) 45.02. Irrigation was performed at each change of instrument with 5 mL of ultrapure Milli-Q water and the extruded material through the apical foramen was collected. Root cross-sections were subjected to histological analysis by optical microscopy (×40) and the images were evaluated morphometrically using the Image Tool software. Quantification of the extruded material was performed by weighing after liquid evaporation. ANOVA showed no statistically significant differences (p>0.05) among the groups with respect to the procedures used to clean the apical region. Considering the amount of extruded material, the Tukey's HSD showed that canals with mild curvature prepared with the 45.02 surgical diameter showed significantly higher values (p<0.05) that those of the other groups, which were similar between themselves (p>0.05). In conclusion, the effect of cleaning the apical region did not differ in the groups, considering root curvature and the surgical diameter of instruments used for apical preparation. The amount of extruded material was greater in canals with mild curvature that were prepared with the 45.02 surgical instrument diameter.

Este estudo avaliou, in vitro, por meio de microscopia óptica e morfometria, a limpeza da região apical em canais radiculares com curvatura leve e moderada submetidos ao preparo biomecânico com sistema rotatório, bem como avaliou a quantidade de material extruído para a área apical. Incisivos laterais (n = 32), sendo 16 com ângulo de curvatura igual ou inferior a 10º (GI) e 16 entre 11º e 25º (GII), foram submetidos à instrumentação rotatória com o sistema Hero 642 com diferentes diâmetros cirúrgicos: (A) 30,02 e (B) 45,02. A irrigação, a cada troca de instrumento, foi realizada com água ultra-pura de Milli Q (5 mL), e o material extruído através do forame apical foi coletado. As raízes foram submetidas a análise histológica sob microscopia óptica (40×) e as imagens foram submetidas à análise morfométrica utilizando o software Image Tool. A quantificação do material extruído foi realizada por pesagem, após a evaporação do líquido. A análise de variância não mostrou diferença estatística significante em relação à limpeza da região apical nos diferentes grupos testados (p>0,05). Considerando a quantidade de material extruído, o teste de T6ukey mostrou que os canais com curvatura leve preparados com o diâmetro cirúrgico 45,02 apresentaram os maiores valores, sendo estatisticamente diferente dos demais grupos (p<0,05) que foram semelhantes entre si (p>0,05). Pode-se concluir que a limpeza da região apical não diferiu entre os diferentes grupos, considerando a curvatura radicular e o diâmetro cirúrgico. A quantidade de material extruído foi maior nos canais preparados com curvatura leve que foram preparados com diâmetro cirúrgico 45,02.

Interventions for the management of external root resorption.

BACKGROUND: External root resorption is a pathological process which tends to occur following a wide range of mechanical or chemical stimuli such as infection, pressure, trauma or orthodontic tooth movement. Although it is predominantly detected by radiography, in some cases, root resorption may be identified by clinical symptoms i.e. pain, swelling and mobility of the tooth. Treatment alternatives are case-dependant and aim at the removal of the cause and the regeneration of the resorptive lesion. OBJECTIVES: To evaluate the effectiveness of any interventions that can be used in the management of external root resorption in permanent teeth. SEARCH STRATEGY: We searched the following databases in April 2010: The Cochrane Oral Health Group's Trials Register; the Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library 2010, Issue 3); MEDLINE (via OVID) (1950 to April 2010); and EMBASE (via OVID) (1980 to April 2010). We also searched two regional bibliographic databases (IndMED and Iranmedex) and handsearched five Iranian dental journals using free text terms appropriate for this review. SELECTION CRITERIA: Randomised controlled trials comparing any type of intervention including root canal medications and canal filling, splinting or extraction of teeth or the surgical removal of any relevant pathology with each other, or placebo or no treatment applied to permanent teeth with any type of external root resorption which had been confirmed by clinical and radiological examination. DATA COLLECTION AND ANALYSIS: Two review authors conducted screening of studies in duplicate and independently. The Cochrane Collaboration statistical guidelines were to be followed. MAIN RESULTS: 66 trials were identified in our searches none of which matched our inclusion criteria. However, we identified one ongoing study which is potentially relevant to this review and will be assessed when it is published. AUTHORS' CONCLUSIONS: We were unable to identify any reports of randomised controlled trials regarding the efficacy of different interventions for the management of external root resorption. In view of the lack of any high level evidence on this topic, it is suggested that clinicians decide on the most appropriate means of managing this condition according to their clinical experience with regard to patient related factors. Future research should consist of robust clinical trials which conform to the CONSORT statement (www.consort-statement.org/).

Ultra-structural changes at the apical stop irradiated with CO2 laser.

OBJECTIVE: This study evaluated ultra-structural dentine changes at the apical stop after CO(2) laser irradiation used during biomechanical preparation. BACKGROUND: Most studies evaluating the sealing efficiency of CO(2) lasers have been carried out after apical root canal resections and retro-filling procedures. METHODS: Sixty human canines were prepared with #1 to #6 Largo burs. The apical stops were established at 1 mm (n = 30) and 2 mm (n = 30) from the apex. Final irrigation was performed with 1% NaOCl and 15% EDTA followed by 20 ml of distilled and deionized water. Specimens were subdivided into three subgroups (n = 10 for each stop distance): GI- no radiation (n = 20); GII- 3W potency (n = 20), GIII- 5W potency (n = 20). After preparation, specimens were evaluated by scanning electron microscopy, with ultra-structural changes classified according to a scoring system based on six qualitatively different outcomes. RESULTS: Statistical analysis using the Mann-Whitney test confirmed more intense results for the specimens irradiated at 5 W potency than at 3 W (p < 0.0001). The Kruskal-Wallis test indicated that when using the same potencies (3 or 5 W) at 1 and 2 mm from the apex, there were no statistically significant differences in ultra-structural changes. CONCLUSIONS: Our results showed that ultra-structural changes ranged from smear layer removal to dentine fusion. As laser potency was increased from 3 to 5 W, ultra-structural changes included extensive fused lava-like areas sealing the apical foramen.

Interventions for treating traumatised ankylosed permanent front teeth.

BACKGROUND: Teeth that have suffered trauma can fuse to the surrounding bone - the process referred to as dental ankylosis. Ankylosed permanent front teeth fail to erupt during facial growth and can become displaced, thus resulting in functional and aesthetic problems. Dental ankylosis is also associated with root resorption, which eventually leads to the loss of affected teeth. Different interventions for the management of ankylosed permanent front teeth have been described but it is unclear which are the most effective. OBJECTIVES: To assess the effects of treatment options for ankylosed permanent front teeth. SEARCH STRATEGY: We searched the following databases: Cochrane Oral Health Group Trials Register (to September 2009); Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library 2009, Issue 3); MEDLINE (1950 to September 2009); EMBASE (1980 to September 2009); and LILACS (1980 to September 2009). There were no language restrictions. SELECTION CRITERIA: Randomised controlled trials (RCTs) comparing any intervention for treating displaced ankylosed permanent front teeth in individuals of any age. DATA COLLECTION AND ANALYSIS: Two independent review authors screened studies in duplicate. Although no study was included, the authors had planned to extract data independently and to assess risk of bias following the Cochrane Collaboration methods. MAIN RESULTS: The search retrieved 77 references to studies. None matched the inclusion criteria and therefore were excluded. AUTHORS' CONCLUSIONS: There is no evidence from RCTs about the comparative effectiveness of the different treatment options for ankylosed permanent front teeth. The lack of high level evidence for the management of this health problem emphasises the need for well designed clinical trials.

Dentin permeability of the apical third in different groups of teeth.

This ex vivo study evaluated dentin permeability of the root canal in the apical third of different human groups of teeth. Eighty teeth were used, 8 from each dental group: maxillary and mandibular central incisors, lateral incisors and canines, maxillary first premolars (buccal and palatal roots), mandibular first premolars, and maxillary and mandibular second premolars, totalizing 88 roots that were distributed in 11 groups. The root canals were instrumented, irrigated with 1% NaOCl and 15% EDTA. Roots were immersed in 10% copper sulfate for 30 min and then in 1% rubeanic acid alcohol solution for the same period; this chemical reaction reveals dentin permeability by the formation of copper rubeanate, which is a dark-colored compound. Semi-serial 100-µm-thick cross-sections were obtained from the apical third of the roots. Five sections of each apical third were washed, dehydrated, cleared and mounted on glass slides for examination under optical microscopy. The percentage of copper ion infiltration and the amount of tubular dentin were quantified by morphometric analysis. The penetration of copper ions in the apical third ranged from 4.60 to 16.66%. The mandibular central and lateral incisors presented the highest dentin permeability (16.66%), while the maxillary canines and mandibular second and first premolars presented the lowest dentin permeability (4.60%, 4.80% and 5.71%, respectively; p<0.001). The other teeth presented intermediate permeability. In conclusion, dye penetration into dentin tubules at the apical region is strongly dependent on the group of teeth evaluated.

Dentin permeability of the apical third in different groups of teeth

This ex vivo study evaluated dentin permeability of the root canal in the apical third of different human groups of teeth. Eighty teeth were used, 8 from each dental group: maxillary and mandibular central incisors, lateral incisors and canines, maxillary first premolars (buccal and palatal roots), mandibular first premolars, and maxillary and mandibular second premolars, totalizing 88 roots that were distributed in 11 groups. The root canals were instrumented, irrigated with 1 percent NaOCl and 15 percent EDTA. Roots were immersed in 10 percent copper sulfate for 30 min and then in 1 percent rubeanic acid alcohol solution for the same period; this chemical reaction reveals dentin permeability by the formation of copper rubeanate, which is a dark-colored compound. Semi-serial 100-µm-thick cross-sections were obtained from the apical third of the roots. Five sections of each apical third were washed, dehydrated, cleared and mounted on glass slides for examination under optical microscopy. The percentage of copper ion infiltration and the amount of tubular dentin were quantified by morphometric analysis. The penetration of copper ions in the apical third ranged from 4.60 to 16.66 percent. The mandibular central and lateral incisors presented the highest dentin permeability (16.66 percent), while the maxillary canines and mandibular second and first premolars presented the lowest dentin permeability (4.60 percent, 4.80 percent and 5.71 percent, respectively; p<0.001). The other teeth presented intermediate permeability. In conclusion, dye penetration into dentin tubules at the apical region is strongly dependent on the group of teeth evaluated.

Este estudo ex vivo avaliou a permeabilidade da dentina do canal radicular do terço apical de diferentes grupos de dentes humanos. Foram utilizados 80 dentes, sendo 8 de cada grupo dental superior e inferior: incisivos centrais, incisivos laterais, caninos, primeiros pré-molares superiores (raízes vestibulares e palatinas), primeiros pré-molares inferiores, segundos pré-molares superiores e inferiores, totalizando 88 raízes, as quais foram distribuídas em 11 grupos. Os canais foram instrumentados, irrigados com NaOCl a 1 por cento e EDTA a 15 por cento. As raízes foram imersas em sulfato de cobre a 10 por cento por 30 min e acido rubeânico a 1 por cento pelo mesmo período. Esta reação química revela a permeabilidade da dentina por meio da formação de um complexo escurecido denominado rubeanato de cobre. Hemi-secções de 100 µm de espessura foram obtidas do terço apical da raiz. Cinco secções do terço apical foram lavadas, desidratadas, diafanizadas e montadas em lâminas para análise em microscopia óptica. A porcentagem de infiltração de íons cobre e a quantidade de dentina tubular foram quantificadas por meio de análise morfométrica. A penetração de íons cobre no terço apical da raiz variou de 4,60 por cento a 16,66 por cento. Os incisivos centrais e laterais apresentaram a maior permeabilidade dentinária (16,66 por cento), e os caninos superiores e segundos e primeiros pré-molares inferiores as menores (4,60 por cento, 4,80 por cento e 5,71 por cento, respectivamente; p<0,001). Os outros dentes apresentaram permeabilidade intermediaria. Conclui-se que a penetração de corante nos túbulos dentinários da região apical é extremamente dependente do grupo de dentes avaliado.

Antibacterial agents in composite restorations for the prevention of dental caries.

BACKGROUND: Dental caries is a multifactorial disease in which the fermentation of food sugars by bacteria from the biofilm (dental plaque) leads to localised demineralisation of tooth surfaces, which may ultimately result in cavity formation. Resin composites are widely used in dentistry to restore teeth. These restorations can fail for a number of reasons, such as secondary caries, excessive wear, marginal degradation, tooth sensitivity, pulpal death, and restorative material fracture. Caries adjacent to restorations is one of the main causes for restoration replacement. The presence of antibacterials in both the filling material and the bonding systems would theoretically be able to affect the initiation and progression of caries adjacent to restorations. OBJECTIVES: To assess the effects of antibacterial agents incorporated into composite restorations for the prevention of dental caries. SEARCH STRATEGY: We searched the following databases in February 2009: the Cochrane Oral Health Group's Trials Register; the Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library 2009, Issue 1); MEDLINE via OVID (1950 to February 2009) without filter; and EMBASE via OVID (1980 to February 2009) without filter. SELECTION CRITERIA: Randomised controlled clinical trials (RCTs) comparing resin composite restorations containing antibacterial agents with non-antibacterial containing composite restorations. DATA COLLECTION AND ANALYSIS: Two review authors conducted screening of studies in duplicate and independently, and although no eligible trials were identified, the two authors had planned to extract data independently and assess trial quality using standard Cochrane Collaboration methodologies. MAIN RESULTS: We retrieved 128 references to studies, none of which matched the inclusion criteria for this review and all of which were excluded. AUTHORS' CONCLUSIONS: We were unable to identify any randomised controlled trials on the effects of antibacterial agents incorporated into composite restorations for the prevention of dental caries. The absence of high level evidence for the effectiveness of this intervention emphasises the need for well designed, adequately powered, randomised controlled clinical trials.

Permeability of different groups of maxillary teeth after 38% hydrogen peroxide internal bleaching.

This study evaluated the influence of internal tooth bleaching with 38% hydrogen peroxide (H2O2) on the permeability of the coronal dentin in maxillary anterior teeth and premolars. Seventy teeth (14 per group) were used: central incisors (CI), lateral incisor (LI), canines (C), first premolars (1PM) and second premolars (2PM). Pulp chamber access and transversal sectioning at 2 mm from the cementoenamel junction were performed and the specimens were divided into 2 groups (n= 7): a) no treatment and b) bleaching with 38% H2O2. The bleaching agent was applied to the buccal surface and to the pulp chamber for 10 min. This procedure was repeated 3 times. The specimens were processed histochemically with copper sulfate and rubeanic acid, sectioned longitudinally, and digitalized in a scanner. The area of stained dentin was measured using Image Tool software. Data were analyzed statistically by ANOVA and Tukey's HSD test (alpha=0.05). There was statistically significant difference (p<0.001) among the untreated groups, CI (0.23 +/- 0.26) having the lowest permeability and LI (10.14 +/- 1.89) the highest permeability. Among the bleached groups, dentin permeability was increased in all groups of teeth except for 2PM. It may be concluded that bleaching with 38% H2O2 affected dentin permeability near the pulp chamber in maxillary anterior teeth and in first and second premolars.