Genome-wide transcript expression analysis reveals major chickpea and lentil genes associated with plant branching.

The search for elite cultivars with better architecture has been a demand by farmers of the chickpea and lentil crops, which aims to systematize their mechanized planting and harvesting on a large scale. Therefore, the identification of genes associated with the regulation of the branching and architecture of these plants has currently gained great importance. Herein, this work aimed to gain insight into transcriptomic changes of two contrasting chickpea and lentil cultivars in terms of branching pattern (little versus highly branched cultivars). In addition, we aimed to identify candidate genes involved in the regulation of shoot branching that could be used as future targets for molecular breeding. The axillary and apical buds of chickpea cultivars Blanco lechoso and FLIP07-318C, and lentil cultivars Castellana and Campisi, considered as little and highly branched, respectively, were harvested. A total of 1,624 and 2,512 transcripts were identified as differentially expressed among different tissues and contrasting cultivars of chickpea and lentil, respectively. Several gene categories were significantly modulated such as cell cycle, DNA transcription, energy metabolism, hormonal biosynthesis and signaling, proteolysis, and vegetative development between apical and axillary tissues and contrasting cultivars of chickpea and lentil. Based on differential expression and branching-associated biological function, ten chickpea genes and seven lentil genes were considered the main players involved in differentially regulating the plant branching between contrasting cultivars. These collective data putatively revealed the general mechanism and high-effect genes associated with the regulation of branching in chickpea and lentil, which are potential targets for manipulation through genome editing and transgenesis aiming to improve plant architecture.

Epigenetic changes induced by chronic and acute chromium stress treatments in Arabidopsis thaliana identified by the MSAP-Seq.

Chromium (Cr) is an highly toxic metal to plants and causes severe damage to their growth, development, and reproduction. Plant exposure to chronic and acute Cr stress treatments results in significant changes at short time in the gene expression profile and at long time in the genomic DNA methylation profile at a transgenerational level and, consequently, in gene expression. These epigenetic modifications and their implications imposed by the Cr stress are not yet completely known in plants. Herein, were identified the epigenetic changes induced by chronic and acute Cr stress treatments in Arabidopsis thaliana plants using Methylation Sensitive Amplification Polymorphism coupled with next-generation sequencing (MSAP-Seq). First-generation Arabidopsis plants (termed F0 plants) kept under hoagland solution were subjected to Cr stress treatments. For chronic Cr stress, plants were treated through hoagland solution with 2.5 µM Cr during the entire cultivation period until seed harvest. Meanwhile, for acute Cr stress, plants were treated with 5 µM Cr during the first three weeks and returned to unstressful control condition until seed harvest. Seeds from F0 plants were sown and F1 plants were re-submitted to the same Cr stress treatments. The seed germination rate was evaluated from F-2 seeds harvested of F1 plants kept under different Cr stress treatments (0, 10, 20, and 40 µM) compared to the unstressful control condition. These data showed significant changes in the germination rate of F-2 seeds originating from stressed F1 plants compared to F-2 seeds harvested from unstressful control plants. Given this data, F1 plants kept under these chronic and acute Cr stress treatments and unstressful control condition were evaluated for the transgenerational epigenetic modifications using MSAP-Seq. The MSAP-Seq data showed that several genes were modified in their methylation status as a consequence of chronic and acute Cr stress treatment to maintain plant defenses activated. In particular, RNA processing, protein translation, photorespiration, energy production, transmembrane transport, DNA transcription, plant development, and plant resilience were the major biological processes modulated by epigenetic mechanisms identified in F1 plants kept under chronic and acute Cr stress. Therefore, collective data suggested that Arabidopsis plants kept under Cr stress regulate their epigenetic status over generations based on DNA methylation to modulate defense and resilience mechanisms.

Sutura em Polia Retificada para síntese de feridas de pele tensionadas / Rectified Pulley Suture for the synthesis of tensioned skin wounds

Introdução: A síntese de feridas de pele tensionadas é uma área que tem sido alvo de estudos para o desenvolvimento de técnicas de sutura que sejam capazes de realizar o fechamento primário dessas feridas com alívio de tensão, garantindo uma cicatrização adequada e evitando complicações como deiscência, edema, sangramento e infecção. Método: Esta pesquisa tratou-se de um estudo piloto, sendo a primeira apresentação da técnica de Sutura em Polia Retificada para síntese de feridas de pele tensionadas através do acompanhamento prospectivo, duplo-cego, de uma série de casos de 8 pacientes randomicamente admitidos no centro cirúrgico de um hospital de alta complexidade de uma cidade de médio porte. Resultados: A Sutura em Polia Retificada é uma técnica versátil e apta para lidar com feridas de pele tensionadas, uma vez que no intraoperatório conseguiu fechar por primeira intenção lesões de até 6,5 centímetros e de diferentes regiões tensionadas sem necessidade do uso de técnicas mais complexas, como retalhos, enxertos, zetaplastia e fechamento por segunda intenção. Além disso, no pós-operatório, houve redução dos escores da POSAS, indicando um processo de cicatrização satisfatório tanto para os observadores quanto para o paciente. É imprescindível mencionar, também, que o desfecho mais temido no seguimento dos pacientes com feridas tensionadas submetidos a fechamento primário - a deiscência - foi completamente evitado. Conclusão: A técnica é simples, confiável, segura e reprodutível, com curta curva de aprendizagem, de forma que a Sutura em Polia Retificada pode ser considerada como uma nova ferramenta a ser integrada ao arsenal cirúrgico.

Introduction: The synthesis of tensioned skin wounds is an area that has been the subject of studies for the development of suturing techniques that are capable of performing the primary closure of these wounds with tension relief, ensuring adequate healing, and avoiding complications such as dehiscence, edema, bleeding, and infection. Method: This research was a pilot study, being the first presentation of the Rectified Pulley Suture technique for the synthesis of tensioned skin wounds through prospective, double-blind monitoring of a series of cases of 8 patients randomly admitted to the surgical center of a high-complexity hospital in a mediumsized city. Results: Rectified Pulley Suture is a versatile technique suitable for dealing with tensioned skin wounds, since intraoperatively it was able to close, by first intention, lesions measuring up to 6.5 centimeters and in different tensioned regions without the need for the use of more extensive techniques. complex, such as flaps, grafts, Z-plasty, and secondary intention closure. Furthermore, post-operatively, there was a reduction in POSAS scores, indicating a satisfactory healing process for both observers and the patient. It is also essential to mention that the most feared outcome in the follow-up of patients with tension wounds undergoing primary closure - dehiscence - was completely avoided. Conclusion: The technique is simple, reliable, safe, and reproducible, with a short learning curve, so the Rectified Pulley Suture can be considered a new tool to be integrated into the surgical arsenal.

Concomitant Light-Reversible Magnetic Response in Multiferroic Oxide Heterostructures for Multiphysics Applications.

The concept of multiphysics, where materials respond to diverse external stimuli, such as magnetic fields, electric fields, light irradiation, stress, heat, and chemical reactions, plays a fundamental role in the development of innovative devices. Nanomanufacturing, especially in low-dimensional systems, enhances the synergistic interactions taking place on the nanoscale. Light-matter interaction, rather than electric fields, holds great promise for achieving low-power, wireless control over magnetism, solving two major technological problems: the feasibility of electrical contacts at smaller scales and the undesired heating of the devices. Here, we shed light on the remarkable reversible modulation of magnetism using visible light in epitaxial Fe3O4/BaTiO3 heterostructure. This achievement is underpinned by the convergence of two distinct mechanisms. First, the magnetoelastic effect, triggered by ferroelectric domain switching, induces a proportional change in coercivity and remanence upon laser illumination. Second, light-matter interaction induces charged ferroelectric domain walls' electrostatic decompensations, acting intimately on the magnetization of the epitaxial Fe3O4 film by magnetoelectric coupling. Crucially, our experimental results vividly illustrate the capability to manipulate magnetic properties using visible light. This concomitant mechanism provides a promising avenue for low-intensity visible-light manipulation of magnetism, offering potential applications in multiferroic devices.

Cotton plants overexpressing the Bacillus thuringiensis Cry23Aa and Cry37Aa binary-like toxins exhibit high resistance to the cotton boll weevil (Anthonomus grandis).

The cotton boll weevil (CBW, Anthonomus grandis) stands as one of the most significant threats to cotton crops (Gossypium hirsutum). Despite substantial efforts, the development of a commercially viable transgenic cotton event for effective open-field control of CBW has remained elusive. This study describes a detailed characterization of the insecticidal toxins Cry23Aa and Cry37Aa against CBW. Our findings reveal that CBW larvae fed on artificial diets supplemented exclusively with Cry23Aa decreased larval survival by roughly by 69%, while supplementation with Cry37Aa alone displayed no statistical difference compared to the control. However, the combined provision of both toxins in the artificial diet led to mortality rates approaching 100% among CBW larvae (LC50 equal to 0.26 PPM). Additionally, we engineered transgenic cotton plants by introducing cry23Aa and cry37Aa genes under control of the flower bud-specific pGhFS4 and pGhFS1 promoters, respectively. Seven transgenic cotton events expressing high levels of Cry23Aa and Cry37Aa toxins in flower buds were selected for greenhouse bioassays, and the mortality rate of CBW larvae feeding on their T0 and T1 generations ranged from 75% to 100%. Our in silico analyses unveiled that Cry23Aa displays all the hallmark characteristics of ß-pore-forming toxins (ß-PFTs) that bind to sugar moieties in glycoproteins. Intriguingly, we also discovered a distinctive zinc-binding site within Cry23Aa, which appears to be involved in protein-protein interactions. Finally, we discuss the major structural features of Cry23Aa that likely play a role in the toxin's mechanism of action. In view of the low LC50 for CBW larvae and the significant accumulation of these toxins in the flower buds of both T0 and T1 plants, we anticipate that through successive generations of these transgenic lines, cotton plants engineered to overexpress cry23Aa and cry37Aa hold promise for effectively managing CBW infestations in cotton crops.

Reversible optical control of magnetism in engineered artificial multiferroics.

Optical means instead of electric fields may offer a new pathway for low-power and wireless control of magnetism, holding great potential to design next-generation memory and spintronic devices. Artificial multiferroic materials have shown remarkable suitability as platforms towards the optical control of magnetic properties. However, the practical use of magnetic modulation should be both stable and reversible and, particularly, it should occur at room temperature. Here we show an unprecedented reversible modulation of magnetism using low-intensity visible-light in Fe75Al25/BaTiO3 heterostructures, at room temperature. This is enabled by the existence of highly oriented charged domain walls arranged in arrays of alternating in-plane and out-of-plane ferroelectric domains with stripe morphology. Light actuation yields a net anisotropic stress caused by ferroelectric domain switching, which leads to a 90-degree reorientation of the magnetic easy axis. Significant changes in the coercivity and squareness ratio of the hysteresis loops can be light-modulated, encouraging the development of novel low energy-consumption wireless magneto-optical devices.

The Effects In Vitro of Photobiomodulation Over Fibroblasts and Extracellular Matrix.

Objective: The objective of this study is to evaluate the potential effects of photobiomodulation (PBM) on cell proliferation and extracellular matrix production of human fibroblasts (FN1) cultured in 2D. Background: Patients with healing difficulties suffer injuries that take time to recover. In addition, aging can be seen in our faces daily when we look in the mirror; in both situations, collagen production is reduced. Fibroblasts act in the beginning and at the end of the inflammation phase, signaling to immune agents, and platelets, and producing collagen, coordinating repair. PBM increases cell viability, proliferation, and mRNA production. Methods: Human fibroblasts were irradiated three times after cell seed (after 24, 48, and 72 h) using a gallium-aluminum arsenideGaAlAs low-level laser (LLL). Cell viability, proliferative response, synthesis of collagen types I and III, and soluble collagen production were analyzed. The statistical significance of differences between groups was determined using unpaired one-way analysis of variance (ANOVA) p < 0.05. Results: PBM increased significantly the number of fibroblasts, and the production of collagen types I (Col I) and III (Col III), after three sessions of LLL with 2.5 J per session, every 24 h, for 3 consecutive days; total energy delivered after 72 h is 7.5 J. Conclusions: This energy density of LLL increases fibroblast proliferation and collagen production in vitro without side effects.

Next-generation methods for early disease detection in crops.

Plant pathogens are commonly identified in the field by the typical disease symptoms that they can cause. The efficient early detection and identification of pathogens are essential procedures to adopt effective management practices that reduce or prevent their spread in order to mitigate the negative impacts of the disease. In this review, the traditional and innovative methods for early detection of the plant pathogens highlighting their major advantages and limitations are presented and discussed. Traditional techniques of diagnosis used for plant pathogen identification are focused typically on the DNA, RNA (when molecular methods), and proteins or peptides (when serological methods) of the pathogens. Serological methods based on mainly enzyme-linked immunosorbent assay (ELISA) are the most common method used for pathogen detection due to their high-throughput potential and low cost. This technique is not particularly reliable and sufficiently sensitive for many pathogens detection during the asymptomatic stage of infection. For non-cultivable pathogens in the laboratory, nucleic acid-based technology is the best choice for consistent pathogen detection or identification. Lateral flow systems are innovative tools that allow fast and accurate results even in field conditions, but they have sensitivity issues to be overcome. PCR assays performed on last-generation portable thermocyclers may provide rapid detection results in situ. The advent of portable instruments can speed pathogen detection, reduce commercial costs, and potentially revolutionize plant pathology. This review provides information on current methodologies and procedures for the effective detection of different plant pathogens. © 2023 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

The effects in vitro of photobiomodulation over fibroblasts and extracellular matrix

Objective: The objective of this study is to evaluate the potential effects of photobiomodulation (PBM) on cell proliferation and extracellular matrix production of human fibroblasts (FN1) cultured in 2D. Background: Patients with healing difficulties suffer injuries that take time to recover. In addition, aging can be seen in our faces daily when we look in the mirror; in both situations, collagen production is reduced. Fibroblasts act in the beginning and at the end of the inflammation phase, signaling to immune agents, and platelets, and producing collagen, coordinating repair. PBM increases cell viability, proliferation, and mRNA production. Methods: Human fibroblasts were irradiated three times after cell seed (after 24, 48, and 72 h) using a gallium-aluminum arsenideGaAlAs low-level laser (LLL). Cell viability, proliferative response, synthesis of collagen types I and III, and soluble collagen production were analyzed. The statistical significance of differences between groups was determined using unpaired one-way analysis of variance (ANOVA) p < 0.05. Results: PBM increased significantly the number of fibroblasts, and the production of collagen types I (Col I) and III (Col III), after three sessions of LLL with 2.5 J per session, every 24 h, for 3 consecutive days; total energy delivered after 72 h is 7.5 J. Conclusions: This energy density of LLL increases fibroblast proliferation and collagen production in vitro without side effects.

Identification and expression profile of the SMAX/SMXL family genes in chickpea and lentil provide important players of biotechnological interest involved in plant branching.

MAIN CONCLUSION: SMAX/SMXL family genes were successfully identified and characterized in the chickpea and lentil and gene expression data revealed several genes associated with the modulation of plant branching and powerful targets for use in transgenesis and genome editing. Strigolactones (SL) play essential roles in plant growth, rooting, development, and branching, and are associated with plant resilience to abiotic and biotic stress conditions. Likewise, karrikins (KAR) are "plant smoke-derived molecules" that act in a hormonal signaling pathway similar to SL playing an important role in seed germination and hairy root elongation. The SMAX/SMXL family genes are part of these two signaling pathways, in addition to some of these members acting in a still little known SL- and KAR-independent signaling pathway. To date, the identification and functional characterization of the SMAX/SMXL family genes has not been performed in the chickpea and lentil. In this study, nine SMAX/SMXL genes were systematically identified and characterized in the chickpea and lentil, and their expression profiles were explored under different unstressless or different stress conditions. After a comprehensive in silico characterization of the genes, promoters, proteins, and protein-protein interaction network, the expression profile for each gene was determined using a meta-analysis from the RNAseq datasets and complemented with real-time PCR analysis. The expression profiles of the SMAX/SMXL family genes were very dynamic in different chickpea and lentil organs, with some genes assuming a tissue-specific expression pattern. In addition, these genes were significantly modulated by different stress conditions, indicating that SMAX/SMXL genes, although working in three distinct signaling pathways, can act to modulate plant resilience. Most CaSMAX/SMXL and partner genes such as CaTiE1 and CaLAP1, have a positive correlation with the plant branching level, while most LcSMAX/SMXL genes were less correlated with the plant branching level. The SMXL6, SMXL7, SMXL8, TiE1, LAP1, BES1, and BRC1 genes were highlighted as powerful targets for use in transgenesis and genome editing aiming to develop chickpea and lentil cultivars with improved architecture. Therefore, this study presented a detailed characterization of the SMAX/SMXL genes in the chickpea and lentil, and provided new insights for further studies focused on each SMAX/SMXL gene.

Nitrous oxide and methane emissions from a Ferralsol as affected by loblolly pine cultivation time in subtropical Brazil.

We hypothesized that the age of loblolly pine stands influences soil methane (CH4) and nitrous oxide (N2O) emissions. This is a relevant topic to be studied in subtropical Brazil, where the pine plantation area is increasing considerably. We evaluated N2O and CH4 emissions for two years in a Ferralsol under loblolly pine (Pinus taeda L.) stands of 1, 9 and 18 year-olds and a native forest (NF). We calculated the net CO2eq emission by considering the N2O and CH4 emissions from soil and the carbon (C) accumulation as litter in the forest floor. The soil N2O emission reduced gradually over the loblolly pine cultivation years, whereas CH4 uptake rates showed no clear pattern. Soil N2O emission showed a positive relationship with soil temperature in NF, and with soil ammonium and nitrate intensities in the pine stands. Soil CH4 uptake was inversely related to water-filled pore space in the pine stands, but this relationship was not observed in NF. The soil CH4 uptake rate was 4.6 times higher (p < 0.10) in NF than the average uptake in loblolly pine stands. On the other hand, soil N2O emissions in 9 and 18-year-old stands were similar (p > 0.10) to those in NF (1.3 kg N ha-1 yr-1). Our results suggest that cultivation with loblolly pine for 18 years can reduce soil N2O emission, and the uptake of CH4 in this system offsets 17 % of N2O emissions. Furthermore, the C accumulation as litter in the forest floor of the mature pine stands (9- and 18-year-old) generated a net emission of -1.6 Mg CO2eq ha-1 yr-1, showing to be an expressive offsetting mechanism. Therefore, we conclude that aged loblolly forests can reach N2O emissions levels comparable to those of NF, and the C sequestration in these forests floor can significantly contribute to offset N2O emissions and act as sink for net atmospheric CO2eq.

Expression profile of the NCED/CCD genes in chickpea and lentil during abiotic stress reveals a positive correlation with increased plant tolerance.

Carotenoid cleavage dioxygenase (CCD) gene family is organized in two subfamilies: (i) 9-cis epoxycarotenoid dioxygenase (NCED) genes and (ii) CCD genes. NCED genes are essential for catalyzing the first step of the abscisic-acid (ABA) biosynthesis, while CCD genes produce precursors of the strigolactones hormone. The functional characterization of these gene subfamilies has not been yet performed in chickpea and lentil. Herein, were identified and systematically characterized two NCED and five CCD genes in the chickpea and two NCED and six CCD genes in lentil. After in silico sequence analysis and phylogeny, the expression profile of the NCED/CCD genes was determined by meta-analysis and real-time PCR in plants under different stress conditions. Sequence data revealed that NCED/CCD genes are highly conserved between chickpea and lentil. This conservation was observed both at gene and protein sequence levels and phylogenetic relationships. Analysis of the promoter sequences revealed that all NCED/CCD genes have a considerable number of cis-regulatory elements responsive to biotic and abiotic stress. Protein sequence analysis evidenced that NCED/CCD genes share several conserved motifs and that they have a highly interconnected interaction network. Furthermore, the three-dimensional structure of these proteins was determined and indicated that some proteins have structures with considerable similarity. The meta-analysis revealed that NCED/CCD genes are dynamically modulated in different organs and under different stress conditions, but they have a positive correlation with plant tolerance. In accordance, real-time PCR data showed that both NCED and CCD genes are differentially modulated in plants under drought stress. In particular, CaNCED2, CaCCD5, LcNCED2, LcCCD1, and LcCCD2 genes have a positive correlation with improved plant tolerance to drought stress. Therefore, this study presented a detailed characterization of the chickpea and lentil NCED/CCD genes and provided new insights to improve abiotic stress tolerance in these two important crops.

Performance, carcass, and meat traits of locally adapted Brazilian cattle breeds under feedlot conditions.

Little is known about the performance, carcass, and meat traits of locally adapted cattle in Brazil. This study aimed to compare the growth, slaughter, and carcass traits as well as meat quality of two local breeds (Curraleiro Pé-Duro and Pantaneiro) with the Nelore breed. Fifteen 30-month-old steers of each breed were weighted (Curraleiro Pé-Duro = 264.80 kg; Nelore = 346.80 kg; Pantaneiro = 316.20 kg) and raised in a feedlot condition for 112 days, with measurements to assess growth and slaughter, visual and carcass and meat traits. Data were submitted to variance and multivariate analyses. Nelore and Curraleiro Pé-Duro had similar Gluteus medius depths. Pantaneiro and Curraleiro Pé-Duro were superior for leg compactness index (P < 0.05) and had higher eye muscle area than Nelore (P < 0.05). Although there was no difference in daily weight gain and slaughter weight between breeds, Curraleiro Pé-Duro had a lower initial weight (264.80 kg) when compared to Nelore (346.80 kg; P < 0.05). Nelore and Curraleiro Pé-Duro deposited more fat than Pantaneiro (P < 0.05), while Curraleiro Pé-Duro and Pantaneiro had more muscle than Nelore (P < 0.05), which also had more bone and a higher percentage of second-quality cuts (P < 0.05). Meat from Nelore also showed lower succulence than Pantaneiro (P < 0.05) and higher shear force than the other breeds (P < 0.05). Pantaneiro's meat had the most capacity to retain water (P < 0.05), lower shear force (P < 0.05), and was more succulent (P < 0.05) when compared to the other breeds. Multivariate analysis showed that Pantaneiro, Curraleiro Pé-Duro, and Nelore breeds can be considered distinct in growth, carcass, and meat traits, with the local breeds showing superior meat traits. The local breeds Curraleiro Pé-Duro and Pantaneiro presented characteristics similar or better to those of the Nelore, proving to be animals with great productive potential and generate high meat quality under feedlot conditions.

CNTs/Fe-BTC Composite Materials for the CO2-Photocatalytic Reduction to Clean Fuels: Batch and Continuous System.

CNTs/Fe-BTC composite materials were synthesized with the one-step solvothermal method. MWCNTs and SWCNTs were incorporated in situ during synthesis. The composite materials were characterized by different analytical techniques and used in the CO2-photocatalytic reduction to value-added products and clean fuels. In the incorporation of CNTs into Fe-BTC, better physical-chemical and optical properties were observed compared to Fe-BTC pristine. SEM images showed that CNTs were incorporated into the porous structure of Fe-BTC, indicating the synergy between them. Fe-BTC pristine showed to be selective to ethanol and methanol; although, it was more selective to ethanol. However, the incorporation of small amounts of CNTs into Fe-BTC not only showed higher production rates but changes in the selectivity compared with the Fe-BTC pristine were also observed. It is important to mention that the incorporation of CNTs into MOF Fe-BTC allowed for increasing the mobility of electrons, decreasing the recombination of charge carriers (electron/hole), and increasing the photocatalytic activity. In both reaction systems (batch and continuous), composite materials showed to be selective towards methanol and ethanol; however, in the continuous system, lower production rates were observed due to the decrease in the residence time compared to the batch system. Therefore, these composite materials are very promising systems to convert CO2 to clean fuels that could replace fossil fuels soon.

Cost-effective screen printing approach for Ce/Nd-doped ZnAl2O4 films: tuning crystallinity induced by the substrate.

Near-infrared (NIR) emitting phosphors are currently receiving considerable attention owing to their high demand in various applications, such as light detection and ranging (LiDAR), short-range communications, security, biosensing and night vision lighting applications. The miniaturization of photonic components demands the integration of thin films into exploitable devices. In this context, NIR emitting ZnAl2O4:Ce/Nd films of hundreds of nanometer thickness are synthesized using a scalable and cost-efficient approach to screen printing. Cerium co-doping is responsible for the Nd emission in the NIR through energy transfer by exciting the films under UV excitation at around 360 nm. Through the proper design of ink, dense Nd/Ce doped ZnAl2O4 ceramic films were produced using polycrystalline alumina. The use of polycrystalline alumina substrates opens up new opportunities because this ceramic is a cheap and well-known substrate for optoelectronic packaging. During manufacturing, as a direct effect of predominant crystal growth over the polycrystalline alumina substrate, an increase in emission intensity is achieved. The results obtained by X-ray photoelectron (XPS) and X-ray absorption near edge spectroscopy (XANES) serve to determine the oxidation state of Ce. The findings of this study indicate that a higher concentration of Ce4+ promotes NIR emission. This study may contribute to a better understanding of film production processes of films based on the ZnAl2O4 matrix and guide future studies on films for NIR emitters.

A novel picorna-like virus identified in the cotton boll weevil Anthonomus grandis (Coleoptera: Curculionidae).

The cotton boll weevil (CBW; Anthonomus grandis; Coleoptera: Curculionidae) is considered the major insect pest of cotton, causing considerable losses in yield and fiber quality. An increase in the boll weevil population due to increasingly inefficient chemical control measures is of great concernamong cotton producers. The absence of conventional or transgenic cultivars with minimal resistance to CBW has stimulated the search for new molecular and biological tools for efficient control of this insect pest. In this study, we used a metagenomic approach based on RNA deep sequencing to investigate the presence of viruses and coding viral RNA in apparently healthy native adult CBW insects collected from cotton crops in Mato Grosso state, Brazil. Using an Illumina HiSeq 2000 paired-end platform, 138,798 virus-related reads were obtained, and a consensus sequence of a putative new virus, 10,632 nucleotides in length, was assembled. The sequences of the 5' and 3' untranslated regions (UTRs) were determined by rapid amplification of cDNA ends (RACE), followed by Nanopore sequencing. The complete genome sequence included a 5'-UTR (1,158 nucleotides), a 3'-UTR (561 nucleotides), and a single ORF of 8,913 nucleotides encoding a large polyprotein. Sequence analysis of the putative polyprotein showed several regions with high sequence similarity to structural and non-structural proteins of viruses of the family Iflaviridae. Pairwise alignments of polyprotein amino acid sequences showed the highest sequence identity (32.13%) to a partial polyprotein sequence of a putative iflavirus (QKN89051.1) found in samples from wild zoo birds in China. Phylogenetic analysis based on full polyprotein sequences of different iflaviruses indicated that this new picorna-like virus is most closely related to iflaviruses found in lepidopteran insects, and it was therefore tentatively named "Anthonomus grandis iflavirus 1" (AgIV-1). This is, to our knowledge, the first complete viral genome sequence found in CBW, and it could provide a basis for further studies about the infectivity and transmission of this virus and its possible association with symptoms or acute disease. AgIV-1 could potentially be used to develop biological or molecular tools, such as a viral vector to carry interfering RNA molecules for CBW control.

Unraveling the peripheral and local role of inflammatory cytokines in glioblastoma survival.

Glioblastoma (GBM) is a life-threatening disease that presents high morbidity and mortality. The standardized treatment protocol results in a global survival of less than three years in the majority of cases. Immunotherapies have gained wide recognition in cancer treatment; however, GBM has an immunosuppressive microenvironment diminishing the possible effectiveness of this therapy. In this sense, investigating the inflammatory settings and the tumoral nature of GBM patients are an important goal to create an individual plan of treatment to improve overall survival rate and quality of life of these patients. Thirty-two patients who underwent surgical resection of GBM were included in this study. Tumor samples and 10 mL of peripheral blood were collected and immediately frozen. TNF-a, IL-1a and IL-4 were evaluated in the tumor and TNF-a, IL-1a and TGF-b in the plasma by Luminex assay. Immunohistochemistry analysis to determine immune celular profile was done, including immunohistochemistry for CD20, CD68 and CD3. Three cases were excluded. Tumor topography, tumor nature, and tumor volume reconstructions were accurately analyzed by T1-weighted, T2-weighted, and FLAIR magnetic resonance imaging. We found that GBM patients with below median peripheral levels of TNF-a and IL-1a had a decreased survival rate when compared to above median patients. On the other hand, patients with below median peripheral levels of TGF-b increased overall survival rate. Intratumoral IL-1a above median was associated with higher number of macrophages and fewer with B cells. Furthermore, plasmatic TNF-a levels were correlated with intratumoral TNF-a levels, suggesting that peripheral cytokines are related to the tumoral microenvironment. Even though tumor size has no difference regarding survival rate, we found a negative correlation between intratumoral IL-4 and tumor size, where larger tumors have less IL-4 expression. Nevertheless, the tumoral nature had a significant effect in overall survival rate, considering that infiltrative tumors showed decreased survival rate and intratumoral TNF-a. Moreover, expansive tumors revealed fewer macrophages and higher T cells. In multiple variation analyzes, we demonstrated that infiltrative tumors and below median peripheral IL-1a expression represent 3 times and 5 times hazard ratio, respectively, demonstrating a poor prognosis. Here we found that peripheral cytokines had a critical role as prognostic tools in a small cohort of GBM patients.

Genomic prediction for meat and carcass traits in Nellore cattle using a Markov blanket algorithm.

This study was carried out to evaluate the advantage of preselecting SNP markers using Markov blanket algorithm regarding the accuracy of genomic prediction for carcass and meat quality traits in Nellore cattle. This study considered 3675, 3680, 3660 and 524 records of rib eye area (REA), back fat thickness (BF), rump fat (RF), and Warner-Bratzler shear force (WBSF), respectively, from the Nellore Brazil Breeding Program. The animals have been genotyped using low-density SNP panel (30 k), and subsequently imputed for arrays with 777 k SNPs. Four Bayesian specifications of genomic regression models, namely Bayes A, Bayes B, Bayes Cπ and Bayesian Ridge Regression methods were compared in terms of prediction accuracy using a five folds cross-validation. Prediction accuracy for REA, BF and RF was all similar using the Bayesian Alphabet models, ranging from 0.75 to 0.95. For WBSF, the predictive ability was higher using Bayes B (0.47) than other methods (0.39 to 0.42). Although the prediction accuracies using Markov blanket of SNP markers were lower than those using all SNPs, for WBSF the relative gain was lower than 13%. With a subset of informative SNPs markers, identified using Markov blanket, probably, is possible to capture a large proportion of the genetic variance for WBSF. The development of low-density and customized arrays using Markov blanket might be cost-effective to perform a genomic selection for this trait, increasing the number of evaluated animals, improving the management decisions based on genomic information and applying genomic selection on a large scale.

Supraparticles as slow-release fertiliser in seedling potential growth of Eucalyptus urograndis and greenhouse gas flux impacts.

Slow-release urea fertilisers have been shown to present acceptable values for plant yield and mitigate the harmful effect of soil emission gases. This study synthesises a slow-release fertiliser containing fumed-nanosilica, nanofibrillated cellulose as well as sodium alginate as a urea carrier to analyse the growth parameters of Eucalyptus urograndis seedlings and potential emission of soil gases, N2O, CH4, CO2 and ammonia volatilisation. The developed supraparticles, arranged layered nanoparticle structure, presented a decrease in the normal nitrogen content of urea of 19%, which is attributed to the binding of this element. A good electrostatic interaction between the elements was confirmed by the FTIR with 20% of nitrogen content from its chemical composition and an increase in thermal degradation of the main components when synthesised. The profile of urea release presented to be as first-order with 85% of this compound was released only after 60 days. These characteristics led to statistically increased growth of Eucalyptus seedlings compared to the controls, which improves with higher dosages of urea. Values of biomass and characteristics of the plant were used for principal component analysis which resulted in good cluster formation based on the upward concentration of urea added to the plant. Nevertheless, flux gases were statistically higher for certain time periods on lower urea particle concentration, while increased concentration presented N2O emissions within standard rates with no significant variation in the other measured gases, which was attributed to the soil microbial targeted consumption. Therefore, this material can be beneficial in the agriculture industry.

Overexpression of the GmEXPA1 gene reduces plant susceptibility to Meloidogyne incognita.

KEY MESSAGE: The overexpression of the soybean GmEXPA1 gene reduces plant susceptibility to M. incognita by the increase of root lignification. Plant expansins are enzymes that act in a pH-dependent manner in the plant cell wall loosening and are associated with improved tolerance or resistance to abiotic or biotic stresses. Plant-parasitic nematodes (PPN) can alter the expression profile of several expansin genes in infected root cells. Studies have shown that overexpression or downregulation of particular expansin genes can reduce plant susceptibility to PPNs. Root-knot nematodes (RKN) are obligate sedentary endoparasites of the genus Meloidogyne spp. of which M. incognita is one of the most reported species. Herein, using a transcriptome dataset and real-time PCR assays were identified an expansin A gene (GmEXPA1; Glyma.02G109100) that is upregulated in the soybean nematode-resistant genotype PI595099 compared to the susceptible cultivar BRS133 during plant parasitism by M. incognita. To understand the role of the GmEXPA1 gene during the interaction between soybean plant and M. incognita were generated stable A. thaliana and N. tabacum transgenic lines. Remarkably, both A. thaliana and N. tabacum transgenic lines overexpressing the GmEXPA1 gene showed reduced susceptibility to M. incognita. Furthermore, plant growth, biomass accumulation, and seed yield were not affected in these transgenic lines. Interestingly, significant upregulation of the NtACC oxidase and NtEFE26 genes, involved in ethylene biosynthesis, and NtCCR and Nt4CL genes, involved in lignin biosynthesis, was observed in roots of the N. tabacum transgenic lines, which also showed higher lignin content. These data suggested a possible link between GmEXPA1 gene expression and increased lignification of the root cell wall. Therefore, these data support that engineering of the GmEXPA1 gene in soybean offers a powerful biotechnology tool to assist in RKN management.