Selection between and within full-sib sugarcane families using the modified BLUPIS method (BLUPISM).

The objective of this study was to assess the efficiency of a modification of the simulated individual best linear unbiased prediction (BLUPIS) procedure, which is used for the approximation of classic individuals (BLUPI) for selection between and within sugarcane families. A total of 110 full-sib families were employed in an experiment initiated in 2007 using a randomized block design with five replicates. The variable tons of stalks per hectare was measured from a plot containing 20 plants. The modified BLUPIS (BLUPISM) procedure showed a 0.98 correlation with BLUPI, thus demonstrating great efficiency in selecting individuals in sugarcane families during the initial phase of genetic breeding programs.

Genetic diversity and coefficient of parentage between clones and sugarcane varieties in Brazil.

The success of the development of new sugarcane varieties is associated with the ability to correctly select the genitor. The aim of this study was to evaluate the genetic diversity between 113 clones and sugarcane varieties using the Ward-modified location model procedure with added information about the coefficient of parentage and endogamy. In this study, data was used from 100 experiments that evaluated clones; the experimental phase was conducted in 70 places between the years 2002 and 2009 on the outlining in random blocks. According to the diversity analysis, 3 groups formed: G1, G2, and G3, which were composed of 58, 8, and 47 genotypes, respectively. The clones of groups G1 and G3 were the most outstanding. Thus, biparental crossbreeding involving clones and varieties of these 2 groups can efficiently obtain transgressive genotypes. Knowledge of the heterotypic groups indicated by the Ward-modified location model method, along with the parentage information, will make it a lot easier to define the desirable and undesirable crossbreeds for public and private breeding programs that develop sugarcane varieties.

Genetically modified crops: Brazilian law and overview.

In Brazil, the first genetically modified (GM) crop was released in 1998, and it is estimated that 84, 78, and 50% of crop areas containing soybean, corn, and cotton, respectively, were transgenic in 2012. This intense and rapid adoption rate confirms that the choice to use technology has been the main factor in developing national agriculture. Thus, this review focuses on understanding these dynamics in the context of farmers, trade relations, and legislation. To accomplish this goal, a survey was conducted using the database of the National Cultivar Registry and the National Service for Plant Variety Protection of the Ministry of Agriculture, Livestock and Supply [Ministério da Agricultura, Pecuária e Abastecimento (MAPA)] between 1998 and October 13, 2013. To date, 36 events have been released: five for soybeans, 18 for corn, 12 for cotton, and one for beans. From these events, 1395 cultivars have been developed and registered: 582 for soybean, 783 for corn and 30 for cotton. Monsanto owns 73.05% of the technologies used to develop these cultivars, while the Dow AgroScience - DuPont partnership and Syngenta have 16.34 and 4.37% ownership, respectively. Thus, the provision of transgenic seeds by these companies is an oligopoly supported by legislation. Moreover, there has been a rapid replacement of conventional crops by GM crops, whose technologies belong almost exclusively to four multinational companies, with the major ownership by Monsanto. These results reflect a warning to the government of the increased dependence on multinational corporations for key agricultural commodities.

Relationships between methods of variety adaptability and stability in sugarcane.

The identification and recommendation of superior genotypes is crucial for the growth of industrial crops, and sugarcane breeding performs a vital role by developing more productive cultivars. The study of genotype x environment interaction has been an essential tool in this process. Thereby, the purpose of this study was to investigate the relationship between methods of adaptability and stability in sugarcane. Data were collected from trials using a randomized block design with three repetitions and 15 clones of sugarcane in nine environments in the State of Minas Gerais, Brazil. Methodologies based on analysis of variance, linear regression, multivariate analysis, nonparametric statistics, and mixed model were used. The methods of Lin and Binns, Annicchiarico, and harmonic mean of relative performance of genotypic values (MHPRVG) were similar in their classification of genotypes. The additive main effect and multiplicative interactions (AMMI) and Wricke methods tended to select the most stable genotypes; however, genotypes were less productive, coinciding with the stability parameter of Eberhart and Russell. The MHPRVG method is preferred over the methods of Lin and Binns and Annicchiarico because it includes the concepts of productivity, adaptability, and stability, and it provide direct genetic values of individuals. The use of the MHPRVG and Eberhart and Russell methods is recommended because the combination of these methods is complementary and leads to greater accuracy in the identification of genotypes of sugarcane for different environments.

Genetic diversity in sugarcane varieties in Brazil based on the Ward-Modified Location Model clustering strategy.

We evaluated the genetic diversity of 77 clones of sugarcane used in crosses made by the Brazilian interuniversity network for the development of the sugar/energy sector (RIDESA) breeding program. Characterization of the genotypes was carried out at the ratoon stage, based on eight morphological traits and seven agronomic traits. Diversity analysis was carried out beginning with the Ward-Modified Location Model. The ideal number of groups was three. Groups 1, 2, and 3 were composed of 37, 21, and 19 accessions, respectively. Group 1 was formed entirely of commercial varieties (hybrids of advanced generations) and elite clones, with the exception of the old varieties 'Caiana Fita' and 'Cana Blanca' (hybrids of Saccharum officinarum). In general, group 2 had more divergent accessions regarding origin, including L60-14, NG57-6, TUC77-42, IN84-105 (hybrid of S. officinarum), and 28NG289 (species of S. robustum). Group 3 was formed entirely of commercial varieties and elite clones from the RIDESA program, with the exception of genotypes Co285 (India), Q124 (Australia) and VAT90-212 (unknown origin). The analysis based on the Ward-Modified Location Model procedure resulted in an adequate and clearly discriminating grouping of sugarcane accessions, allowing the use of all the available information about the genotypes, in a mix of continuous and categorical variables.

Experimental optimization of the number of blocks by means of algorithms parameterized by confidence interval in popcorn breeding.

The objective of this study was to determine the optimal number of repetitions to be used in competition trials of popcorn traits related to production and quality, including grain yield and expansion capacity. The experiments were conducted in 3 environments representative of the north and northwest regions of the State of Rio de Janeiro with 10 Brazilian genotypes of popcorn, consisting by 4 commercial hybrids (IAC 112, IAC 125, Zélia, and Jade), 4 improved varieties (BRS Ângela, UFVM-2 Barão de Viçosa, Beija-flor, and Viçosa) and 2 experimental populations (UNB2U-C3 and UNB2U-C4). The experimental design utilized was a randomized complete block design with 7 repetitions. The Bootstrap method was employed to obtain samples of all of the possible combinations within the 7 blocks. Subsequently, the confidence intervals of the parameters of interest were calculated for all simulated data sets. The optimal number of repetition for all of the traits was considered when all of the estimates of the parameters in question were encountered within the confidence interval. The estimates of the number of repetitions varied according to the parameter estimated, variable evaluated, and environment cultivated, ranging from 2 to 7. It is believed that only the expansion capacity traits in the Colégio Agrícola environment (for residual variance and coefficient of variation), and number of ears per plot, in the Itaocara environment (for coefficient of variation) needed 7 repetitions to fall within the confidence interval. Thus, for the 3 studies conducted, we can conclude that 6 repetitions are optimal for obtaining high experimental precision.

Snap bean recommendation based on different methods of phenotypic stability.

In order to recommend the best strains of snap beans from the Universidade Estadual do Norte Fluminense (UENF) breeding program, different methods of analysis of phenotypic stability were adopted to evaluate the performance of 14 lines (F(9) and F(10)) of indeterminate growth habit, which were compared with 3 controls, namely, 2 commercial varieties (Feltrin and Top Seed Blue Line) and 1 parent (UENF-1445). The experiments were conducted in Bom Jesus do Itabapoana in 2010 and 2011, and in Cambuci in 2011. The experiment was arranged in a randomized block design with 4 replications. To complement the information obtained by different methods, the UENF 7-5-1 strain was indicated for favorable environments (Bom Jesus do Itabapoana; 2010 and 2011), UENF 7-10-1, UENF 7-14-1, and UENF 7-20-1 strains were indicated for an unfavorable environment (Cambuci), and UENF 7-12-1 was indicated for both.

Use of transgenic seeds in Brazilian agriculture and concentration of agricultural production to large agribusinesses.

We identified the commercial releases of genetically modified organisms (GMOs) in Brazil, their characteristics, the types of genetic transformation used, and the companies responsible for the development of these GMOs, classifying them into two categories: private companies, subdivided into multinational and national, and public institutions. The data came from the data bank of the national registration of cultivars and the service of national protection of cultivars of the Ministry of Agriculture, Fishing and Supply (MAPA). This survey was carried out from 1998 to February 12, 2011. Until this date, 27 GMOs had been approved, including five for soybean, 15 for maize and seven for cotton cultivars. These GMOs have been used for the development of 766 cultivars, of which, 305 are soybean, 445 are maize, and 13 are cotton cultivars. The Monsato Company controls 73.2% of the transgenic cultivars certified by the MAPA; a partnership between Dow AgroSciences and DuPont accounts for 21.4%, and Syngenta controls 4.96%. Seed supply by these companies is almost a monopoly supported by law, giving no choice for producers and leading to the fast replacement of conventional cultivars by transgenic cultivars, which are expensive and exclude small producers from the market, since seeds cannot be kept for later use. This situation concentrates production in the hands of a few large national agribusiness entrepreneurs.

Revisiting the Brazilian scenario of registry and protection of cultivars: an analysis of the period from 1998 to 2010, its dynamics and legal observations.

During the last 20 years, the national production of grains has increased 156.1%; productivity increased 93.8% and there has been an increase of 29.1% in cultivated area. Currently, agribusiness is responsible for 40% of Brazilian exports. Nevertheless, there is little quantitative information on the main plant species of economic interest that have been registered and protected in the Agriculture, Fisheries and Food Supply Ministry (MAPA) by public and private companies, as well as by public-private partnerships. Consequently, we investigated the registry and protection of 27 species of economic interest, including the 15 that are the basis of the Brazilian diet, based on the information available on the site CultivarWeb, of MAPA, for the period from 1998 to August 30, 2010. We also examined the legislation that regulates registration and protection procedures and its implications for plant breeding and plant product development. It was found that the private sector controls 73.1% of the registrations and 53.56% of the protections, while 10.73% of the protections were of material developed overseas. Public-private partnerships contributed little to the development of new cultivars, with 0.5% of the registries and 3.61% of the protections. We conclude that plant protection directed private investment to development of wheat and rice varieties, with the greatest public investments directed to corn and sorghum. After the Cultivar Protection Law was implemented, there was restriction of access to germplasm banks, which could inhibit advances in Brazilian plant breeding programs, indicating a need for revision of this legal barrier.