Solution Stability of Poloxamer 188 Under Stress Conditions.

Poloxamer 188 (P188) is a triblock copolymer of the form polyethylene oxide-polypropylene oxide-polyethylene oxide (PEO-PPO-PEO). The center PPO block is hydrophobic, and the side PEO blocks are hydrophilic, resulting in surface-active properties. P188 has been used in the pharmaceutical industry as an excipient in various formulations and drug delivery systems. Although the chemical stability of P188 in the solid state has been reported, there are very few reports detailing the solution state stability. In this study, we report the solution state stability of P188 conducted to evaluate the effects of P188 concentration, temperature, pH and buffer type, and trace metals on chemical stability. The degradation chemistry of P188 and identification of degradation products was studied using various analytical techniques (ultraviolet, gas chromatography-mass spectrometry, and liquid chromatography-mass spectrometry). The degradation of P188 in solution was found to be strongly dependent on temperature, P188 concentration, and buffer type. For the first time, we report that in histidine buffer, oxidation of both P188 and histidine may occur at pharmaceutically relevant conditions. We observed degradation of both histidine and P188 as well as species formed from the mutual interactions of the degradation products from the 2 types of molecules.

Formulation and immunogenicity studies of type III secretion system needle antigens as vaccine candidates.

Bacterial infections caused by Shigella flexneri, Salmonella typhimurium, and Burkholderia pseudomallei are currently difficult to prevent due to the lack of a licensed vaccine. Here we present formulation and immunogenicity studies for the three type III secretion system (TTSS) needle proteins MxiH(Δ5), PrgI(Δ5), and BsaL(Δ5) (each truncated by five residues at its C terminus) as potential candidates for vaccine development. These antigens are found to be thermally stabilized by the presence of carbohydrates and polyols. Additionally, all adsorb readily to aluminum hydroxide apparently through a combination of hydrogen bonds and/or Van der Waals forces. The interaction of these proteins with the aluminum-based adjuvant changes with time resulting in varying degrees of irreversible binding. Peptide maps of desorbed protein, however, suggest that chemical changes are not responsible for this irreversible association. The ability of MxiH(Δ5) and PrgI(Δ5) to elicit strong humoral immune responses was tested in a murine model. When administered intramuscularly as monomers, the needle components exhibited dose dependent immunogenic behavior. The polymerized version of MxiH was exceptionally immunogenic even at low doses. The responses of both monomeric and polymerized forms were boosted by adsorption to an aluminum salt adjuvant.

Formulation and immunogenicity of a potential multivalent type III secretion system-based protein vaccine.

The virulence of many pathogenic Gram-negative bacteria is dependent upon their type III secretion (TTS) systems. Here, we discuss initial formulation studies of five TTS needle tip proteins IpaD (Shigella flexneri), BipD (Burkholderia pseudomallei), SipD (Salmonella spp.), LcrV (Yersinia spp.), and PcrV (Pseudomonas aeruginosa) as targets for subunit vaccines. Excipient screening and subsequent assays lead to the selection of 10% sucrose and 5% dextrose as an optimal stabilizer combination for all five proteins. All of the proteins adsorb to aluminum hydroxide adjuvant, although the mechanisms of adsorption may vary. The proteins are physically stable when adsorbed to the adjuvant for at least 3 months at room temperature and chemical stability is enhanced in the presence of excipients. The ability of the IpaD and SipD proteins to elicit strong humoral immune responses was also tested in a murine model in the presence and absence of their needle counterparts MxiH and PrgI (see previous paper in this issue). Both proteins produce high antibody titers regardless of dose. While the IpaD titer is boosted slightly in the presence of its needle protein, MxiH, SipD titers appear to be reduced when administered in the presence of its needle counterpart, PrgI.

Biophysical characterization of Chlamydia trachomatis CT584 supports its potential role as a type III secretion needle tip protein.

Chlamydia are obligate intracellular bacterial pathogens that cause a variety of diseases. Like many Gram-negative bacteria, they employ type III secretion systems (T3SS) for invasion, establishing and maintaining their unique intracellular niche, and possibly cellular exit. Computational structure prediction indicated that ORF CT584 is homologous to other T3SS needle tip proteins. Tip proteins have been shown to be localized to the extracellular end of the T3SS needle and play a key role in controlling secretion of effector proteins. We have previously demonstrated that T3SS needle tip proteins from different bacteria share many biophysical characteristics. To support the hypothesis that CT584 is a T3SS needle tip protein, biophysical properties of CT584 were explored as a function of pH and temperature, using spectroscopic techniques. Far-UV circular dichroism, Fourier transform infrared spectroscopy, UV absorbance spectroscopy, ANS extrinsic fluorescence, turbidity, right angle static light scattering, and analytical ultracentrifugation were all employed to monitor the secondary, tertiary, quaternary, and aggregation behavior of this protein. An empirical phase diagram approach is also employed to facilitate such comparisons. These analyses demonstrate that CT584 shares many biophysical characteristics with other T3SS needle tip proteins. These data support the hypothesis that CT584 is a member of the same functional family, although future biologic analyses are required.

pH sensitivity of type III secretion system tip proteins.

Many pathogenic gram-negative bacteria employ type III secretion systems to transport proteins into the host cell membrane and cytoplasm to subvert normal cellular functions. The type III secretion apparatus consists of a basal body spanning the inner and outer bacterial membranes and a needle which extends away from the bacterium. Recent work has found that a special class of proteins localizes to the tip of the needle to control secretion of effector proteins. Five of these tip proteins are IpaD (Shigella flexneri), BipD (Burkholderia pseudomallei), SipD (Salmonella spp.), LcrV (Yersinia spp.), and PcrV (Pseudomonas aeruginosa). In this study, the conformational stability of these proteins was characterized as a function of pH and temperature. Understanding the stability of the proteins in different pH environments is particularly important since they are expected to encounter different pH environments in their passage through the gastrointestinal tract and are exposed to low pH microenvironments near the surface of target cell membranes. Secondary and tertiary structural changes were monitored using the spectroscopic techniques of far-UV circular dichroism, Trp fluorescence, ANS fluorescence, and ultraviolet absorption spectroscopy. Optical density and right angle scattering measurements were also used to evaluate protein association/dissociation. Empirical phase diagrams were then applied to mathematically combine data from the various spectroscopic techniques to provide a global picture of the proteins' structural behavior in solution. The responses of the proteins to changes in temperature and pH conditions reveal two distinct subfamilies in terms of stability. The first is that of IpaD, BipD, and SipD whose corresponding phase diagrams show conformational differences at pH 5-6. The conserved pH dependence in this subfamily suggests possible common mechanistic function. In the second subfamily (LcrV and PcrV), conformational stability is directly related to pH, also indicating mechanistic similarities.

Preparation and characterization of translocator/chaperone complexes and their component proteins from Shigella flexneri.

Shigella flexneri causes a severe form of bacillary dysentery also known as shigellosis. Onset of shigellosis requires bacterial invasion of colonic epithelial cells which is initiated by the delivery of translocator and effector proteins to the host cell membrane and cytoplasm, respectively, by the Shigella type III secretion system (TTSS). The Shigella translocator proteins, IpaB and IpaC, form a pore complex in the host cell membrane to facilitate effector delivery; however, prior to their secretion IpaB and IpaC are partitioned in the bacterial cytoplasm by association with the cytoplasmic chaperone IpgC. To determine their structural and biophysical properties, recombinant IpaB/IpgC and IpaC/IpgC complexes were prepared for their first detailed in vitro analysis. Both IpaB/IpgC and IpaC/IpgC complexes are highly stable and soluble heterodimers whose formation prevents IpaB-IpaC interaction as well as Ipa-dependent disruption of phospholipid membranes. Circular dichroism spectroscopy shows that IpgC binding has a detectable influence on IpaC secondary/tertiary structure and stability. In contrast, IpaB structure is not as dramatically affected by chaperone binding. To more precisely ascertain the influence of chaperone binding on IpaC structure and stability, single tryptophan mutants were generated for detailed fluorescence spectroscopy analysis. These mutants provide a low-resolution picture of how IpaC exists in the Shigella cytoplasm with chaperone binding possibly involving distinct regions within the N- and C-terminal halves of IpaC. This preliminary assessment of the IpaC-IpgC interaction is supported by initial deletion mutagenesis studies. The data provide the first structural analysis of IpgC association with IpaB and IpaC.

Effects of adsorption to aluminum salt adjuvants on the structure and stability of model protein antigens.

The effect of adsorption onto aluminum salt adjuvants on the structure and stability of three model protein antigens was studied using fluorescence and Fourier transform infrared spectroscopies, as well as isothermal titration and differential scanning calorimetric techniques. Lysozyme was preferentially adsorbed to aluminum phosphate (Adju-Phos), whereas ovalbumin and bovine serum albumin were better adsorbed to aluminum hydroxide (Alhydrogel). A linearized Langmuir adsorption isotherm was used to obtain information regarding the binding interactions between proteins and adjuvants. Binding energetics and stoichiometry data obtained from isothermal titration calorimetry measurements were complex. Based on the spectroscopic and differential scanning calorimetry studies, the structure of all three proteins, when adsorbed to the surface of an aluminum salt, was altered in such a way as to render the proteins less thermally stable. Besides the pharmaceutical significance of this destabilization, we consider the possibility that this phenomenon may facilitate the presentation of antigens and thus contribute to the adjuvant activity of the aluminum salts.