ABSTRACT
We present the development of an electrochemical sensor towards melatonin determination based on the synergistic effect between MoS2 nanosheets and cucurbit[8]uril. For the sensor construction cucurbit[8]uril suspensions were prepared in water, and MoS2 nanosheets were obtained by liquid exfoliation in ethanol:water. The sensing platform was topographically characterized by Atomic Force Microscopy. Electrochemical Impedance Spectroscopy experiments allowed us to study the charge transfer process during melatonin oxidation. Moreover, stoichiometry of the resulting complex has also been determined. After the optimization of the sensor construction and the experimental variables involved in the Differential Pulse Voltammetric response of melatonin, detection limit of 3.80 × 10-7 M, relative errors minor than 3.8% and relative standard deviation lower than 4.4% were obtained. The proposed sensor has been successfully applied to melatonin determination in pharmaceutical and biological samples as human urine and serum, with very good recoveries ranging from 90 to 102%.
Subject(s)
Melatonin , Humans , Molybdenum/chemistry , Limit of Detection , Electrochemical Techniques/methodsABSTRACT
In this work, a novel fluorescence sensor has been designed to solve the actual need of new fast and inexpensive sensing platforms for the analysis of synthetic colorants. It is based on MoS2 quantum dots obtained by a hydrothermal method and incorporated as fluorophore into the matrix of PVC membranes, which are deposited on quartz substrates by spin-coating. It was proven, as in these conditions, MoS2 quantum dots maintain the fluorescent properties that they present in solution. Experiments carried out in solution displayed a maximum emission when they were excited under 310 nm. This initial fluorescence decreases linearly in presence of increasing concentrations of various synthetic colorants namely quinoline yellow, tartrazine, sunset yellow, allura red, ponceau 4R and carmoisine. The two possible mechanisms that can explain this quenching effect, colorants absorbing photons emitted by quantum dots and/or competing with the nanomaterial for photons coming from the excitation source, were evaluated. The most pronounced effect was observed with quinoline yellow, as a result of a mixed mechanism. The optimized methodology developed for the determination of quinoline yellow showed a linear concentration range between 5.4 and 55.0 µg with a limit of detection of 1.6 µg. The sensor was applied to the determination of quinoline yellow in a food colour paste obtaining results in good agreement with those obtained by HPLC-UV-vis measurements.
ABSTRACT
Invited for the cover of this issue are two collaborating groups: one at the Universidad Autónoma de Madrid and the other at the Instituto de Ciencia de Materiales de Madrid. The image depicts Cucurbit[8]uril adsorbed on a transition metal dichalcogenide surface letting the cavity open for complex formation with melatonin and allowing efficient electrochemical sensing. Read the full text of the article at 10.1002/chem.202203244.
ABSTRACT
Host-guest interactions are of paramount importance in supramolecular chemistry and in a wide range of applications. Particularly well known is the ability of cucurbit[n]urils (CB[n]) to selectively host small molecules. We show that the charge transfer and complexation capabilities of CB[n] are retained on the surface of 2D transition metal dichalcogenides (TMDs), allowing the development of efficient electrochemical sensing platforms. We unveil the mechanisms of host-guest recognition between the MoS2 -CB[8] hybrid interface and melatonin (MLT), an important molecular regulator of vital constants in vertebrates. We find that CB[8] on MoS2 organizes the receptor portals perpendicularly to the surface, facilitating MLT complexation. This advantageous adsorption geometry is specific to TMDs and favours MLT electro-oxidation, as opposed to other 2D platforms like graphene, where one receptor portal is closed. This study rationalises the cooperative interaction in 2D hybrid systems to improve the efficiency and selectivity of electrochemical sensing platforms.
ABSTRACT
This work presents an on-line fluorescence method for the allura red (AR) determination. The method is based on the fluorescence quenching of dots of MoS2 because of their interaction with the non-fluorescence dye. MoS2-dots were synthetized and characterized by spectroscopic techniques and High Resolution Transmission Electronic Microscopy (HR-TEM). The simultaneous injection of the nanomaterial and the dye in a flow injection analysis system allows the determination of allura red at 1.7 × 10-6 M concentration level with a very good accuracy and precision (Er minor than 10% and RSD lower than 8%) and a sampling frequency of 180 samples per hour. Moreover, the interaction fluorophore-quencher results a dynamic inhibition mechanism. The proposed methodology was applied to the AR analysis in soft beverages and powders for gelatine preparation. Colourant concentrations of 63 ± 2 mg/L (n = 3) and 0.30 ± 0.01 mg/g (n = 3) were found, respectively. These results were validated by high performance liquid chromatography technique.
