Banana starch modified by heat moisture treatment and annealing: Study on digestion kinetics and enzyme affinity.

Starch modification by annealing (ANN) and heat-moisture treatment (HMT) results in a lower crystallinity compared to native but the change of B crystalline type to A type is only observed in HMT starch. All starches possess two different digestion rate constants i.e. k1 (at rapid phase) and k2 (at slow phase) which may be linked to the preserved intact starch granule following thermal treatment. HMT starch contains higher content of slowly digestible starch (C2∞) compared to the C2∞ of the other starches. The lower enzyme binding to HMT starch (Kd value increases from 0.12 mg/mL in native starch to 0.83 mg/mL) may be linked to the increase in the degree of ordered structure of the granule surface (observed from the absorption band ratio of 1000 cm-1/1022 cm-1). The lower affinity may lead to a lower k1 value. This holds true for ANN and native starch which displays similar k1, Kd value and degree of ordered to disordered structure. Lower k2 in HMT starch compared to the corresponding k2 in the other starches may be linked to the slower enzyme diffusion into the core of starch granule due to the tightly packed structure of A crystalline type in HMT starch.

The Effect of Dual-Modification by Heat-Moisture Treatment and Octenylsuccinylation on Physicochemical and Pasting Properties of Arrowroot Starch.

Starch is widely applied in various industrial sectors, including the food industry. Starch is used as a thickener, stabilizer, or emulsifier. However, arrowroot starch generally has weaknesses, such as unstable under heating and acidic conditions, which are generally applied to processing in the food industry. Modifications were applied to improve the characteristics of native arrowroot starch. In this study, arrowroot starch was modified by heat-moisture treatment (HMT), octenylsuccinylation (OSA), and dual modification between OSA and HMT in a different sequence--namely, HMT followed by OSA, and OSA followed by HMT. This study aims to determine the effect of different modification methods on the physicochemical and functional properties of native arrowroot starch. The result shows that both single HMT and dual modification caused damage to native starch granules, such as the formation of cracks and roughness. For single OSA treatment, especially, there is no significant change in granule morphology after modification. All modification treatments did not change the crystalline type of starch but reduced the RC of native starch. Both single HMT and dual modifications (HMT-OSA, OSA-HMT) increased pasting temperature and setback, but, conversely, decreased the peak and the breakdown viscosity of native starch, whereas single OSA had the opposite trend compared with the other modifications. HMT played a greater role in increasing the thermal stability and the retrogradation ability of arrowroot starch. Both single modifications (HMT and OSA) increased the hardness and gumminess of native starch, and the opposite was true for the dual modifications. HMT had a greater effect on color characteristics, where the lightness and whiteness index of native arrowroot starch decreased. Single OSA modification increased swelling volume higher than dual modification. Both single HMT and dual modifications increased water absorption capacity and decreased the oil absorption capacity of native arrowroot starch.

The Role of Virgin Coconut Oil in Corn Starch/NCC-Based Nanocomposite Film Matrix: Physical, Mechanical, and Water Vapor Transmission Characteristics.

Corn starch-based nanocomposite films usually have low moisture barrier properties. Adding virgin coconut oil (VCO) as a hydrophobic component can improve the nanocomposite film's characteristics, especially the film's permeability and elongation properties. This study aimed to determine the role of VCO with various concentrations (0, 3, 5 wt%) on the physical, mechanical, and water vapor transmission characteristics of corn starch/NCC-based nanocomposite films. Adding 3% VCO to the film showed the lowest WVTR value by 4.721 g/m2.h. At the same time, the value of tensile strength was 4.243 MPa, elongation 69.28%, modulus of elasticity 0.062 MPa, thickness 0.219 mm, lightness 98.77, and water solubility 40.51%. However, adding 5 wt% VCO to the film increased the film's elongation properties by 83.87%. The SEM test showed that adding VCO formed a finer structure with pores in several areas. The FTIR films showed that adding VCO caused a slightly higher absorption peak shift at the O-H groups and new absorption peaks at wave numbers 1741 cm-1 and 1742 cm-1. The results of this study may provide opportunities for the development of nanocomposite films as biodegradable packaging in the future.

Application of Composite Flour from Indonesian Local Tubers in Gluten-Free Pancakes.

Pancakes are fast food snacks that are generally made with wheat flour as the basic ingredients, which is an imported commodity and detrimental for people who are allergic to gluten. To reduce the use of wheat, alternative raw materials derived from local commodities are used, such as modified cassava flour (mocaf), arrowroot flour, and suweg flour. The experiment was carried out by mixing mocaf flour, arrowroot flour, and suweg flour to produce composite flour with a ratio of 70:15:15 (CF1), 70:20:10 (CF2), and 70:20:5 (CF3). The result showed that the ratio of mocaf flour, arrowroot flour, and suweg flour had a significant effect on pasting temperature, peak viscosity, hold viscosity, breakdown viscosity, setback, L*, a*, hue, whiteness, ∆E, as well as swelling volume and solubility on the characteristics of the composite flour. There was also a significant effect on the texture characteristics of hardness, adhesiveness, chewiness, color characteristics L*, a*, whiteness, ∆E, and flavor preference for the gluten-free pancake products. The best formulation to produce pancakes that have characteristics similar to wheat flour-based pancakes was 70% mocaf flour, 15% arrowroot flour, and 15% suweg flour.

Properties Comparison of Oxidized and Heat Moisture Treated (HMT) Starch-Based Biodegradable Films.

Starch-based biodegradable films have been studied for a long time. To improve starch properties and to increase film characteristics, starch is commonly modified. Amongst different types of starch modifications, oxidation and heat moisture treatment are interesting to explore. Unfortunately, review on these modifications for film application is rarely found, although these starch modifications provide interesting results regarding the starch and film properties. This paper aims to discuss the progress of research on oxidized and heat moisture-treated-starch for edible film application. In general, both HMT and oxidation modification on starch lead to an increase in film's tensile strength and Young's modulus, suggesting an improvement in film mechanical properties. The elongation, however, tends to decrease in oxidized starch-based film, hence more brittle film. Meanwhile, HMT tends to result in a more ductile film. The drawback of HMT film is its lower transparency, while the opposite is observed in oxidized films. The observation on WVP (water vapor permeability) of HMT starch-based film shows that the trend of WVP is not consistent. Similarly, an inconsistent trend of WVP is also found in oxidized starch films. This suggests that the WVP parameter is very sensitive to intrinsic and extrinsic factors. Starch source and its concentration in film, film thickness, RH (relative humidity) of film storage, oxidation method and its severity, plasticizer type and its concentration in film, and crystallinity value may partly play roles in determining film properties.

Starch Nanoparticles: Preparation, Properties and Applications.

Starch as a natural polymer is abundant and widely used in various industries around the world. In general, the preparation methods for starch nanoparticles (SNPs) can be classified into 'top-down' and 'bottom-up' methods. SNPs can be produced in smaller sizes and used to improve the functional properties of starch. Thus, they are considered for the various opportunities to improve the quality of product development with starch. This literature study presents information and reviews regarding SNPs, their general preparation methods, characteristics of the resulting SNPs and their applications, especially in food systems, such as Pickering emulsion, bioplastic filler, antimicrobial agent, fat replacer and encapsulating agent. The aspects related to the properties of SNPs and information on the extent of their utilisation are reviewed in this study. The findings can be utilised and encouraged by other researchers to develop and expand the applications of SNPs.

Study of Changes in Crystallinity and Functional Properties of Modified Sago Starch (Metroxylon sp.) Using Physical and Chemical Treatment.

Sago starch has weaknesses such as low thermal stability and high syneresis. Modifications were made to improve the characteristics of native sago starch. In this study, sago starch was modified by autoclave-heating treatment (AHT), osmotic-pressure treatment (OPT), octenyl-succinic anhydride modification (OSA), and citric acid cross-linking (CA). This study aimed to examine the changes in chemical composition, crystallinity, and functional properties of the native sago starch after physical and chemical modifications. The results show that physical modification caused greater granule damage than chemical modification. All modification treatments did not alter the type of crystallinity but decreased the relative crystallinity of native starch. New functional groups were formed in chemically modified starches at a wavelength of 1700-1725 cm-1. The degree of order (DO) and degree of double helix (DD) of the modified starches were also not significantly different from the native sample, except for AHT and OPT, respectively. Physical modification decreased the swelling volume, while chemical modification increased its value and is inversely proportional to solubility. AHT and OPT starches have the best freeze-thaw stability among others, indicating that both starches have the potential to be applied in frozen food.

A Comprehensive Study on Starch Nanoparticle Potential as a Reinforcing Material in Bioplastic.

Starch can be found in the stems, roots, fruits, and seeds of plants such as sweet potato, cassava, corn, potato, and many more. In addition to its original form, starch can be modified by reducing its size. Starch nanoparticles have a small size and large active surface area, making them suitable for use as fillers or as a reinforcing material in bioplastics. The aim of reinforcing material is to improve the characteristics of bioplastics. This literature study aims to provide in-depth information on the potential use of starch nanoparticles as a reinforcing material in bioplastic packaging. This study also reviews starch size reduction methods including acid hydrolysis, nanoprecipitation, milling, and others; characteristics of the nano-starch particle; and methods to produce bioplastic and its characteristics. The use of starch nanoparticles as a reinforcing material can increase tensile strength, reduce water vapor and oxygen permeability, and increase the biodegradability of bioplastics. However, the use of starch nanoparticles as a reinforcing material for bioplastic packaging still encounters obstacles in its commercialization efforts, due to high production costs and ineffectiveness.

Pickering Emulsions as Vehicles for Bioactive Compounds from Essential Oils.

Pickering emulsions are emulsion systems stabilized by solid particles at the interface of oil and water. Pickering emulsions are considered to be natural, biodegradable, and safe, so their applications in various fields-such as food, cosmetics, biomedicine, etc.-are very promising, including as a vehicle for essential oils (EOs). These oils contain volatile and aromatic compounds and have excellent properties, such as antifungal, antibacterial, antiviral, and antioxidant activities. Despite their superior properties, EOs are prone to evaporation, decompose when exposed to light and oxygen, and have low solubility, limiting their industrial applications. Several studies have shown that EOs in Pickering emulsions displays less sensitivity to evaporation and oxidation, stronger antibacterial activity, and increased solubility. In brief, the application of Pickering emulsions for EOs is interesting to explore. This review discusses recent progress in the application of Pickering emulsions, particularly as EO carriers, drug carriers, antioxidant and antimicrobial carriers, and in active packaging.

The Properties, Modification, and Application of Banana Starch.

Banana is a tropical fruit crop that is consumed at large, not only because of the quantity produced but also because it serves the calorific needs of millions of people. Banana is a potential source of high starch content (more than 60%). The application of starch for various purposes is dependent upon its structural, physicochemical, and functional properties. A native starch does not possess all required properties for specific use in the food product. To improve its application, starch can be modified physically, chemically, and enzymatically. Each of these modification methods provides different characteristics to the modified starch. This review aims to examine the chemical composition, granule morphology, crystallinity, pasting, thermal properties, and digestibility of banana starch, and discusses the various modifications and potential applications of banana starch in the food industry.

Densely packed-matrices of heat moisture treated-starch determine the digestion rate constant as revealed by logarithm of slope plots.

Factors affecting the extent and rate constant of starch digestion have been determined by applying logarithm of slope (LOS) plot approach to banana starch modified by heat moisture treatment (HMT) at different temperatures (100, 110 and 120 °C) and time (4 and 8 h). LOS plot result showed that native and HMT-starches exhibited two separate digestion rate constants (k 1 in rapid and k 2 in slower phase). The digestibility increased with the increase in temperature and time of HMT in which the amount of digestible starch at slower phase (C 2∞ ) predominantly contributed to the increase in total digestible starch (total C ∞ ). Small change of the digestible starch in rapid phase (C 1∞ ) might be attributed to the comparatively intact granule surfaces and the relatively small change in ratio of ordered to disordered α-glucan chains at the granule surface as observed by FTIR-ATR. Meanwhile the increase in C 2∞ might be linked to the decrease in crystallinity as observed by XRD. Compared to the native starch, denser packed-structure characterising an A-type crystalline structure in HMT-starches is a key factor determining the lower k 2 in HMT-starches. The densely packed-matrices might slow down the amylase diffusion through the granule to reach digestible α-glucan chains.

The effect of different thermal modifications on slowly digestible starch and physicochemical properties of green banana flour (Musa acuminata colla).

The effect of heat moisture treatment (HMT), annealing (ANN), and dual retrogradation (DR) on functional and pasting properties, digestibility of starch components of banana flour comprising rapidly digestible starch (RDS), slowly digestible starch (SDS) and resistant starch (RS) has been investigated, using native banana flour (NBF) as a control. Crystal type, relative crystallinity and morphological changes were characterised by XRD and SEM. HMT has markedly modified the pasting properties and resulted in the highest SDS content. HMT and ANN increased the relative crystallinity but DR decreased it. HMT and DR altered XRD patterns from B to A and A + B type respectively, while ANN did not change the XRD patterns. The NBF compact granule surface remained unchanged with ANN but changed to a more porous surface with HMT and DR, thereby increasing the digestibility. Crystal type and granule morphology affected the digestibility while relative crystallinity might change the pasting point.