Survivorship and complications of cementless compared to cemented posterior-stabilized total knee arthroplasties: A systematic review and meta-analysis.

PURPOSE: Controversy exists on the best fixation for total knee arthroplasty (TKA). Non-cemented fixation has been theorized to improve patient outcomes and longevity of implantation but no study has focused on comparison between cemented or cementless posterior-stabilized implants despite being the most commonly or second most frequently utilized implant in most total knee replacement registries. METHODS: Inclusion criteria with observational and interventional papers, and review articles that focused on patients with cementless and cemented PS TKAs were used to analyze outcomes such as implant survivorship, complication, or revision rates. Using a combination of keywords, a systematic search was performed on Medline (PubMed), Embase, and Cochrane Library for Meta-Analysis. RESULTS: When using the specified criteria, only 8 studies were selected for full-text analysis and meta-analysis after eliminating screening duplicates, titles, and abstracts without full-text access. These eight studies contain 1652 patients, 693 in the non-cemented Group, and 959 in the cemented total knee prosthesis Group. The meta-analysis revealed the advantage of cementless fixation over cemented fixation in implant survivorship, with 0.6% and 2.6% of aseptic loosening in each Group. The cumulative survival at 12 years was 97.4% for the cementless Group and 89.2% for the cemented Group. The subgroup with a stem showed a positive outcome for cementless fixation over cemented fixation regarding implant survivorship. No differences between the cemented and cementless TKAs were observed in patient-reported outcomes, revision rates, or radiolucent line development. CONCLUSION: We observed comparable rates for cemented and cementless posterior-stabilized TKAs over a medium-term follow-up period.

Bone conductivity and spine fluoroscopy, Hand-Eye-Ear dialogue, during pedicle screw positioning: a new human cognitive system for precision and radiation-decrease; better than artificial intelligence and machine learning system?

PURPOSE: There is an increasing need for pedicle screw positioning while decreasing radiation exposure. This study compares intra-operative radiation dose using posterior internal fixation using impedancemetry-guided pedicle positioning by the Pediguard system versus standard free-hand sighting when surgery was performed with a trainee or expert surgeon. MATERIAL AND METHODS: Using the electrical properties of bone, the Pediguard detects iatrogenic penetration of the pedicle wall and gives auditory feedback to the surgeon. A single centre, two surgeons (one experienced and the other novice) conducted a continuous prospective randomized study for one year. Twenty patients were randomized into one group (free-hand control group) receiving pedicle instrumentation without the use of the Pediguard and the second group receiving pedicle instrumentation with the use of the Pediguard. The total screw placement times and fluoroscopic times for each screw was recorded and pedicle screw position was analyzed on post-operative CT scan. RESULTS: Among the 104 screwed pedicles, 22 unrecognized perforations were detected by CT scan, while no perforation signal was observed intra-operatively. Only one perforation was greater than 2 mm. The overall screwing time was 4.33 ± 1.2 minutes per screw for experienced surgeon and 5.84 ± 2.5 minutes per screw for the novice. Pediguard did not increased significantly the time (0.3 mn per screw) for the experienced surgeon, but the time with Pediguard was longer (2 mn more per screw) for the novice surgeon, particularly at the thoracic level. The overall fluoroscopic average time per screw for the experienced surgeon is 5.8 ± 2.3 s and 10.4 ± 4.5 s for the novice surgeon. For the novice surgeon, radiation time reduced from 12 (without Pediguard) to 6 s (with Pediguard). There was no significant difference for the experienced surgeon in terms of improvement in radiation time with the use of Pediguard. CONCLUSION: The overall time was longer for the novice surgeon with the Pediguard system, but allowed to decrease by 50% the fluoroscopy time.

Hip fractures re-operation compared with death at two year in elderly patients: lowest risk of revision with dual mobility total hip arthroplasty than with bipolar hemiarthroplasty or internal fixation of Garden I and II.

PURPOSE: This study determined at two year follow-up the lifetime risk of re-operation for elderly patients with hip fractures undergoing internal fixation, dual mobility total hip arthroplasty, or bipolar hemiarthroplasty, using death of the patient as a competing risk. MATERIALS AND METHODS: With the hypothesis that arthroplasties may have less complications without increasing mortality even for Garden I and Garden II fractures, we retrospectively reviewed 317 hips with femoral neck fractures operated between January 2015 and August 2019. The mean age at time of surgical intervention was 82.4 years (range 65 to 105). Sixty patients presented a nondisplaced hip fracture (Garden I or II) treated by internal fixtion (I-F), and 257 were treated by hip arthroplasty: 118 dual mobility total hip arthroplasty (DM-THA) and 139 with a bipolar hemiarthroplaty (B-H). Demographics, surgical and complications data, and mortality were collected and compared for each group. RESULTS: The overall mortality rate was 22.4% at two years, and similar (p = 0.98) in all groups, respectively 22%, 22%, and 23% for DM-THA, B-H, and I-F groups. With dual mobility THA, the cumulative incidence of re-operations for any reason was (lower (9%) than with internal fixation (22%) or bipolar hemiarthroplasties (19%). CONCLUSION: Using a double mobility total prosthesis does not increase the post-operative mortality of the patients, nor does it increase their survival. But, reducing the risk of complications certainly improves their quality of life during the little time they have left .

Personalized Hip Joint Replacement with Large Diameter Head: Current Concepts.

Hip arthroplasty is a common procedure in elective orthopaedic surgery that has excellent outcomes. Hip replacement surgery aims to create a "forgotten" joint, i.e., a pain-free joint akin to a native articulation. To achieve such goals, hip arthroplasty must be personalised. This is achieved by restoring: the centre of rotation of the native hip; leg length equality; femoral offset; femoral orientation; soft tissue tension; joint stability with an unrestricted hip range of motion; and having appropriate stress transfer to the bone. In addition, the whole pathway should provide an uneventful and swift postoperative recovery and lifetime implant survivorship with unrestricted activities. At our institution, the preferred option is a personalized total hip arthroplasty (THA) with a large diameter head (LDH) using either monobloc or dual-mobility configuration for the acetabular component. LDH THA offers an impingement-free range of motion and a reduced risk of dislocation. The larger head-neck offset allows for a supraphysiologic range of motion (ROM). This can compensate for a patient's abnormal spinopelvic mobility and surgical imprecision. Additionally, LDH bearing with a small clearance exerts a high suction force, which provides greater hip micro-stability. With appropriate biomechanical reconstruction, LDH THA can restore normal gait parameters. This results in unrestricted activities and higher patient satisfaction scores. We use LDH ceramic on ceramic for our patients with a life expectancy of more than 20 years and use LDH dual mobility bearings for all others.

Liner dissociation in a large-diameter ceramic-bearing acetabular component: a report of five cases.

BACKGROUND: Ceramic-on-ceramic (CoC) bearings for total hip arthroplasty (THA) have been offering very favorable results and survivorship since their introduction. In order to increase range of movement (ROM) and decrease dislocation rates, some manufacturers have introduced larger diameter head (LDH) CoC bearings. This has been achieved with the use of preassembled cup designs, in which the ceramic liner is already fitted into the metal backing and implanted as a monoblock component by the surgeon. In this report we present data from a series of 5 patients with ceramic liner dissociation from a monoblock cup. CASE PRESENTATION: All cases were overweight men with acetabular components of 56 or 58 mm. After a mean of 5.5 (range, 3.5-6.7) years, all patients reported sudden pain and audible noise when performing activities of daily living. Liner displacement was suspected on plain radiographs and confirmed by Ct-scan. Pneumarthrosis was present in all cases. Taper modular junction wear and corrosion signs were observed in the four revised patients. CONCLUSION: Although one of our case is still treated conservatively, implant revision is probably inevitable. Further LDH CoC implant design should take in consideration this potential complication by avoiding bearing diameters over 40mm and/or improving locking mechanism or by providing a real monoblock acetabular implant.

Comparative study of Vancouver type B2 periprosthetic fractures treated by internal fixation versus stem revision.

PURPOSE: Currently, accepted treatment for periprosthetic femoral fractures with loose femoral stem indicates its revision; however, recent studies have proposed treating Vancouver type B2 fractures via internal fixation without stem revision, particularly in the elderly or multi-morbid patients. Despite indications for stem revision, some surgeons tend to perform internal fixation. The main goal of this study was therefore to identify the parameters that were significantly different comparing internal fixation to stem revision for Vancouver type B2 fractures. METHODS: Eighty-one Vancouver B2 periprosthetic femoral fractures, treated between 2010 and 2019, were analysed. The internal fixation (ORIF) and the revision groups were compared. Patients' age, BMI, American Society of Anaesthesiologists (ASA) score, anaesthesia type, operating time, blood loss, surgeons' experience, post-operative weight-bearing, length of hospital stay, and radiological outcome using AGORA roentgenographic assessment were analysed. RESULTS: Patients chosen for ORIF were significantly older than those treated by stem revision (85.4 vs 75.1 years; p = 0.002). Blood loss was 390.7 and 1141.6 ml in the ORIF and revision groups, respectively (p < 0.0001). The surgical times were 134.5 and 225 min in the ORIF and revision groups, respectively (p < 0.0001). Our analysis of BMI, ASA score, anaesthesia type, length of hospital stay, surgeons' experience and radiological outcome, were not significantly different between the two groups. CONCLUSION: Revision did not exhibit better radiological results; moreover, internal fixation resulted in significantly less perioperative blood loss and a shorter operating time, concluding that ORIF is a viable alternative to revision arthroplasty, particularly in older patients.

Revision Total Knee Arthroplasty With the Use of Restricted Kinematic Alignment Protocol: Surgical Technique and Initial Results.

Purpose: Kinematic alignment (KA) for primary total knee arthroplasty (TKA) has been shown to provide equivalent or better results to mechanical alignment (MA). The use of KA in revision TKA to restore the individual knee anatomy, kinematics, and soft-tissue balance, has not been documented yet. The purpose of this study is to describe the technique for performing TKA revision using the restricted KA (rKA) protocol and to report (1) rerevision rate and adverse events, (2) patient-reported outcome measures (PROMs), and (3) radiological signs of implant dysfunction related to this technique. Methods: The rKA protocol was used in 43 selected TKA revisions cases suitable for the technique. Adverse events, reoperation, revision, and their causes were recorded. In addition, PROMs assessed by WOMAC score and radiographic evaluation to identify signs of implant dysfunction were documented at last follow-up. Results: After a mean follow-up of 4.0 years (0.9-7.7, ±2), only one rerevision (2.3%) was required for persisting instability (polyethylene liner exchange from posterior stabilized to a semi-constrained). Short-cemented stems were used for both the femur and tibia in 28 (65%) cases, for the femur alone in 13 (30%) cases, and no stems in two cases. In 31 (72%) cases, a standard posterior stabilized tibial insert was used, while 12 (28%) cases required a semi-constrained insert. The mean WOMAC score was 34.4 (0-80, ±21.7). Mean postoperative arithmetic hip-knee-ankle angle (HKA) was 0.8° varus (from 5° varus to 4° valgus), mean mechanical distal femoral angle was 1.7° valgus (from 2° varus to 5° valgus), and mean mechanical tibia proximal angle was 2.2° varus (from 5° varus to 1° valgus). No radiological evidence of aseptic loosening or periprosthetic radiolucencies were identified. Conclusion: Although current revision TKA implants are not ideal for revision TKA performed with rKA, they are an appealing alternative to MA, especially in cases of early, non-wear-related, unsuccessful MA TKAs. rKA TKA revision using short-cemented stems in conjunction with meticulous preoperative planning is safe in the mid-term. Level of evidence: IV.

Restricted Kinematic Alignment, the Fundamentals, and Clinical Applications.

Introduction: After a better understanding of normal knee anatomy and physiology, the Kinematic Alignment (KA) technique was introduced to improve clinical outcomes of total knee arthroplasty (TKA). The goal of the KA technique is to restore the pre-arthritic constitutional lower limb alignment of the patient. There is, however, a large range of normal knee anatomy. Unusual anatomies may be biomechanically inferior and affect TKA biomechanics and wear patterns. In 2011, the leading author proposed the restricted kinematic alignment (rKA) protocol, setting boundaries to KA for patients with an outlier or atypical knee anatomy. Material and Equipment: rKA aims to reproduce the constitutional knee anatomy of the patient within a safe range. Its fundamentals are based on sound comprehension of lower limb anatomy variation. There are five principles describing rKA: (1) Combined lower limb coronal orientation should be ± 3° of neutral; (2) Joint line orientation coronal alignment should be within ± 5° of neutral; (3) Natural knee's soft tissues tension/ laxities should be preserved/restored; (4) Femoral anatomy preservation is prioritized; (5) The unloaded/most intact knee compartment should be resurfaced and used as the pivot point when anatomical adjustment is required. An algorithm was developed to facilitate the decision-making. Methods: Since ~50% of patients will require anatomic modification to fit within rKA boundaries, rKA is ideally performed with patient-specific instrumentation (PSI), intra-operative computer navigation or robotic assistance. rKA surgical technique is presented in a stepwise manner, following the five principles in the algorithm. Results: rKA produced excellent mid-term clinical results in cemented or cementless TKA. Gait analysis showed that rKA TKA patients had gait patterns that were very close to a non-operated control group, and these kinematics differences translated into significantly better postoperative patient-reported scores than mechanical alignment (MA) TKA cases. Discussion: Aiming to improve the results of MA TKA, rKA protocol offers a satisfactory compromise that recreates patients' anatomy in most cases, omitting the need for extensive corrections and soft tissue releases that are often required with MA. Moreover, it precludes the reproduction of extreme anatomies seen with KA.

Digital twins, artificial intelligence, and machine learning technology to identify a real personalized motion axis of the tibiotalar joint for robotics in total ankle arthroplasty.

PURPOSE: Axial alignment of the talar implant in total ankle arthroplasty remains a major issue, since the real axis of motion of each patient is impossible to determine with usual techniques. Further knowledge regarding individual axis of motion of the ankle is therefore needed. MATERIAL AND METHODS: Therefore, digital twins, artificial intelligence, and machine learning technology were used to identify a real personalized motion axis of the tibiotalar joint. Three-dimensional (3D) models of distal extremities were generated using computed tomography data of normal patients. Digital twins were used to reproduce the mobility of the ankles, and the real ankle of the patients was matched to the digital twin with machine learning technology. RESULTS: The results showed that a personalized axis can be obtained for each patient. When the origin of the axis is the centre of mass of the talus, this axis can be represented in a geodesic system. The mean value of the axis is a line passing in first approximation through the centre of the sphere (with a variation of 3 mm from the centre of the mass of the talus) and through a point with the coordinates 91.6° west and 7.4° north (range 84° to 98° west; - 2° to 12° north). This study improves the understanding of the axis of the ankle, as well as its relationship to the possibility to use the geodesic system for robotic in ankle arthroplasty. CONCLUSION: The consideration of a personalized axis of the ankle might be helpful for better understanding of ankle surgery and particularly total ankle arthroplasty.

Ten-year follow-up of a case of necrotizing fasciitis successfully treated with negative-pressure wound therapy, dermal regeneration template application, and split- thickness skin autograft.

INTRODUCTION: Necrotizing fasciitis is a rapidly progressive and often fatal infection of the fasciae and subcutaneous tissues. PATIENT AND METHODS: In this case report, we present the treatment of a 63-year-old patient suffering from diabetes mellitus, who was admitted to the emergency unit for severe right gluteal pain, which had begun 24 hours before admission. Cutaneous symptoms, oliguria, metabolic acidosis, acute renal failure, severe hypotension, and tachycardia occurred, and the patient was admitted to Intensive Care a few hours after initial admission. The patient underwent a debridement of gluteal, abdominal, lower-thoracic, and upper thigh regions. Biopsy of fascia lata confirmed the suspected diagnosis of necrotizing fasciitis. Treatment included prompt surgical debridement, negative-pressure wound therapy, and dermal regeneration template application with fibrin glue, and subsequent split-thickness skin autografting. RESULTS: After 10 years, elasticity of the skin and limb mobility are comparable to that in non-injured areas, and the patient is pain free. CONCLUSION: In our opinion, this combination should be a treatment of choice for large wounds in the patients with NF with multiple comorbidities.