Effect of sitting posture with and without sole-ground contact on chewing stability and masticatory performance.

PURPOSE: To verify the effect of sitting posture with and without sole-ground contact on chewing stability and masticatory performance. METHODS: Thirty healthy subjects were evaluated. The Conformat was used to analyze the center of sitting pressure (COSP), and the three-dimensional motion analysis system was used to analyze changes in head and trunk postures while subjects remained in a sitting position with and without sole-ground contact. The parameters of masticatory performance and movement were calculated as follows. For evaluating masticatory performance, the amount of glucose extraction (AGE) during chewing of a gummy jelly was measured. For evaluating masticatory movements, the movement of the mandibular incisal point was recorded using the Motion Visi-Trainer V1, and parameters of the stabilities of movement path and rhythm were calculated. RESULTS: Head and trunk sway values and the displacement of COSP were significantly smaller with sole-ground contact than those without sole-ground contact. The masticatory movement path with sole-ground contact showed less variation in the opening distance and more stable movement path compared to those without sole-ground contact. The AGE was significantly greater with sole-ground contact than that without sole-ground contact. CONCLUSION: Sitting posture with and without sole-ground contact affects chewing stability and masticatory performance.

Effect of masticatory movements on head and trunk sways, and sitting and foot pressure distributions during sitting position.

BACKGROUND: The head plays an important role in the postural control. Chewing co-activates jaw and neck muscles leading to coordinated jaw and head-neck movements. Therefore, to examine effect of masticatory movements on head and trunk sways, and sitting and foot pressure distributions during mastication is helpful in the attempt to understand the interrelationship between stomatognathic function and posture control system in the sitting position. OBJECTIVES: The purpose of this study was to test the hypothesis in healthy subjects that masticatory movements affect head and trunk sways and sitting and foot pressure distributions during sitting position. METHODS: A total of 30 healthy male subjects with an average age of 25.3 years (range, 22-32 years) were evaluated. The CONFORMat™ and MatScan™ system were used to analyse changes in sitting pressure distribution center of sitting pressure (COSP) and changes in foot pressure distribution center of foot pressure (COFP), respectively, and the three-dimensional motion analysis system was used to analyse changes in head and trunk postures while subjects remained sitting position with rest position, centric occlusion and chewing. The total trajectory length of COSP/COFP, COSP/COFP area, and head and trunk sway values were compared between the three conditions to evaluate whether masticatory movement affected the stability of head and trunk sways and sitting and foot pressure distributions. RESULTS: Total trajectory length of COSP and COSP area during chewing were significantly shorter and smaller respectively than it was in rest position and centric occlusion (p ⟨ .016). Head sway value during chewing was significantly larger than it was in rest position and centric occlusion (p ⟨ .016). CONCLUSION: Masticatory movements affect sitting pressure distribution and head movements during sitting position.

First record of Australatyaobscura Han & Klotz, 2015 (Decapoda, Atyidae) from the Ryukyu Islands, Japan.

BACKGROUND: The freshwater shrimp, Australatyaobscura Han & Klotz, has been known only from Taiwan and Panay Island, Philippines. NEW INFORMATION: An adult A.obscura was collected from a river on Ishigaki Island, Ryukyu Islands, Japan. This is the first record of the species in Japan and the northernmost specimen-supported record to date. The species is suggested as having been transported northwards by the Kuroshio Current.

Smoothness of molar movement during gum chewing in children with primary dentition.

The purpose of this study was to test the null hypothesis that molar movement during gum chewing in children with primary dentition is as smooth as in adults. Twenty-two healthy children with primary dentition and 23 healthy adult females participated in this study. Mandibular movement during gum chewing was recorded using an optoelectronic analysis system with six degrees-of-freedom at 100 Hz, and 10 cycles were selected for analysis. Normalized jerk cost (NJC) at the incisors and working and balancing molars were calculated in each phase (i.e., opening, closing and occlusal level phases) for each chewing cycle. The NJC of the working side molar in children was larger than in adults in both the opening and occlusal phases. Inter-individual variances of the NJC in each phase in children and adults were smaller than corresponding intra-individual variances, except for the NJC during the occlusal phase of adults for the working and balancing side molars. The inter- and intra-individual variances of the NJC during the closing phase were the smallest in each phase for both children and adults. This indicates that the jaw movements of children with primary dentition are more variable, less smooth, and faster than that of adults.

Enhanced photoluminescence spectroscopy for thin films using the attenuated total reflection method.

We present a powerful spectral photoluminescence measurement method for thin films that utilizes the enhanced absorption of the fluorescent thin films on metal thin films with attenuated total reflection (ATR). The photoluminescence measurement has the advantageous effects of avoiding transmitted light and preventing the loss of luminescence through waveguiding in the film substrates. The ATR modes excited by low-power incident light provide fluorescence intensities that are considerably larger than that of conventional photoluminescence measurements and preserve the spectral profile of the photoluminescence.

Jaw motion during gum-chewing in children with primary dentition.

This study was undertaken to characterize jaw motion during mastication in children with primary dentition and to compare jaw motion with that in adults. The means and the variances of the traditional parameters for the chewing cycle, i.e., duration, excursive ranges and 3-D distances of travel at the lower incisor, molars and condyles were analyzed and compared in 23 children and 25 female adults. The duration of opening in children was significantly shorter than that of adults. Significant differences between children and adults were observed in lateral and vertical excursion of the incisor, lateral excursion at the molars, and vertical excursion at the condyles. Many of these measurements had larger between-subject and between-cycle variances in children than adults, suggesting that chewing motion in children has not yet matured. The results of this study indicate that chewing motion in children is different from that of adults.

Overlap of the primary dentition in children.

OBJECTIVE: The aim of the present study was to estimate the amount of overlap in children with the primary dentition. STUDY DESIGN: The sample consisted of 20 Japanese boys between 3 and 5 years of age (mean age: 4 years 10 months). Landmarks on their maxillary and mandibular dental models were digitized using a three-dimensional mechanical digitizer in a single coordinate system. Multilevel statistical models created best-fit polynomial curves to determine overbite, overjet and buccal height of all primary teeth and describe the dental arch forms. RESULTS: No significant side differences were detected. The primary canine showed the largest overbite (1.87 mm) and buccal height (9.07 mm). The primary second molar exhibited the largest overjet (2.76 mm). Buccal height was the least variable measurement. CONCLUSION: Occlusal relationships of the primary dentition were evaluated in 3-dimensions, establishing overlap variables for clinical diagnosis and treatment planning.

A precise and useful method for coordinating computed tomography and jaw movement frames of reference.

PURPOSE: The aim of this study was to develop a means of coordinating helical computed tomography (CT)- based morphological data in 3 dimensions (3-D) with that pertaining to jaw movement as recorded by a device that measures jaw movement in six-degrees-of-freedom (6-DOF), thus producing multi-point movement analysis of the condyle. METHODS: The study sample was two volunteers. One of the subjects had erosive bony changes in both condyles, while the other had healthy condyles. We employed a customized facebow, which enabled us to coordinate jaw movement data and morphological volume data from CT. Total uncertainty of the coordination was computed, according to International Organization for Standardization (ISO). In order to demonstrate the effects of multi-point analysis for complex condylar movement, we tried to visualize the trajectory of the working condyle in lateral excursion. RESULTS: The overall uncertainty at a condylar center chosen as an example to illustrate the method was 0.38 mm, 0.19 mm, and 0.50 mm in antero-posterior, lateromedial, and supero-inferior directions, respectively, in terms of 95% coverage as defined by the ISO. CONCLUSION: We developed facebow-based X-ray markers with high clinical operability, which could correlate the helical CT's coordinate system with our 6-DOF jaw movement measuring system for precise analysis of 3-D condylar movements. In motion analysis of rotational condyle, even a small amount of measurement error cannot necessarily be neglected. Then, a multi-point approach such as that realized by our system presents the best option.

Effect of dried-bonito broth on mental fatigue and mental task performance in subjects with a high fatigue score.

Dried-bonito broth is commonly employed as a soup and sauce base in Japanese cuisine and is considered to be a nutritional supplement that promotes recovery from fatigue. Previous human trials suggest that the ingestion of dried-bonito broth improves several mood states; however, its effect on fatigue has not yet been clarified. The aim of this study was to clarify the effects of daily ingestion of dried-bonito broth on fatigue and cognitive parameters by a placebo-controlled double blind crossover trial. Forty-eight subjects with fatigue symptoms ingested the dried-bonito broth or a placebo solution every day for 4 weeks. Mood states were evaluated by the Profile of Mood States (POMS), and mental task performance was evaluated by the Uchida-Kraepelin psychodiagnostic (UKP) test. Fatigue and total mood disturbance (TMD) scores on the POMS test decreased significantly during the dried-bonito broth ingestion (p<0.05), but did not change significantly during placebo ingestion. The change in vigor score during dried-bonito broth ingestion was significantly higher than that during placebo ingestion at 2 weeks (p<0.05). The results of the UKP test indicate that the numbers of both total answers and correct answers significantly increased during dried-bonito broth ingestion (p<0.05), while no significant changes were observed in the placebo ingestion. These results suggest that the daily ingestion of dried-bonito broth may improve the mood states, may reduce mental fatigue and may increase performance on a simple calculation task.

Computer-aided determination of occlusal contact points for dental 3-D CAD.

Present dental CAD systems enable us to design functional occlusal tooth surfaces which harmonize with the patient's stomatognathic function. In order to avoid occlusal interferences during tooth excursions, currently available systems usually use the patient's functional occlusal impressions for the design of occlusal contact points. Previous interfere-free design, however, has been done on a trial-and-error basis by using visual inspection. To improve this time-consuming procedure, this paper proposes a computer-aided system for assisting in the determination of the occlusal contact points by visualizing the appropriate regions of the opposing surface. The system can designate such regions from data of the opposing occlusal surfaces and their relative movements can be simulated by using a virtual articulator. Experiments for designing the crown of a lower first molar demonstrated that all contact points selected within the designated regions completely satisfied the required contact or separation during tooth excursions, confirming the effectiveness of our computer-aided procedure.