Skeletal and dentoalveolar characteristics of maxillary lateral incisor agenesis patients: a comparative cross-sectional study.

BACKGROUND: The aim of the study was to evaluate the cephalometric and dentoalveolar characteristics of maxillary lateral incisor agenesis patients, and to compare the findings to a matched control group without tooth agenesis, excluding third molars, from the same population. METHODS: The pre-orthodontic records of 72 non-growing patients, who were treated at the Orthodontic Department, Faculty of Dentistry, Alexandria University, were used to address the aim of this retrospective study. Patients having unilateral or bilateral maxillary lateral incisor agenesis, with no history of previous orthodontic treatment, congenital craniofacial malformations, facial trauma, or surgeries were divided into two test groups based on the pattern of maxillary lateral incisors agenesis (group I: unilateral (UMLIA), group II: bilateral (BMLIA)). A control group (group III (CTRL)) having a complete set of permanent dentition (excluding third molars), and having no dental anomalies was age-matched with the test groups. Measurements were performed on the pre-orthodontic lateral cephalometric radiographs and the pre-orthodontic digital dental casts. The measured variables were compared between the groups using one-way ANOVA and Kruskal Wallis tests according to the normality of the variable. In case of significant results, both tests were followed by multiple pairwise comparisons using Bonferroni adjusted significance level. Significance level was set at P < 0.05. RESULTS: BMLIA group showed a smaller SNA angle and maxillary length, a more negative ANB angle and Wits appraisal, and a larger Maxillo-mandibular differential than UMLIA and/or CTRL group. The dental and soft tissue cephalometric measurements did not show any significant differences between the groups. Dentoalveolar cast measurements showed that BMLIA patients presented with significantly smaller maxillary inter-canine width than UMLIA and CTRL patients. CONCLUSIONS: Cephalometric analysis has shown that subjects with BMLIA have a statistically significant reduced ANB and maxillary length. Tooth eruption may play a role in the development of the maxillary arch.

The antibacterial effect of silver, zinc-oxide and combination of silver/ zinc oxide nanoparticles coating of orthodontic brackets (an in vitro study).

BACKGROUND: Preventive measures are essential during the length of orthodontic treatment to reduce the risk of decalcification and white spot lesions formation. With the evolution of procedures that enable coating of the orthodontic brackets using nanoparticles known for their good antibacterial activity, coating the brackets with nanoparticles of silver, zinc oxide and combination of silver and zinc oxide to evaluate their antibacterial effect in comparison to a control group without coating was carried out in this study. METHODS: Four groups of 12 brackets each were included in the study. The coating procedure was carried out using physical vapor deposition. The antibacterial activity was tested on Streptococcus mutans and Lactobacillus Acidophilus using colony forming count. The antibacterial activity was evaluated immediately after coating and later after 3 months. RESULTS: Brackets coated with combination of silver and zinc oxide nanoparticles had the highest ability on reduction of both Streptococcus mutans and Lactobacillus Acidophilus count followed by silver nanoparticles and then zinc oxide nanoparticles. No significant difference was found between the first and second antibacterial tests. CONCLUSION: The silver/zinc oxide nanoparticles coated brackets had the highest antibacterial effect in comparison to silver nanoparticles and zinc oxide nanoparticles individually coated brackets on Streptococcus mutans and Lactobacillus acidophilus, and all types of coatings showed enhanced antibacterial effect in comparison to the uncoated bracket. Coating of orthodontic brackets could be further assessed in clinical application to prevent decalcification.

Combined effect of Er,Cr:YSGG laser and casein phosphopeptide amorphous calcium phosphate on the prevention of enamel demineralization.

OBJECTIVES: To compare the effect of use of laser, casein phosphopeptide-amorphous calcium phosphate (CPP-ACP), and their combination on prevention of enamel demineralization using polarized light microscopy to assess lesion depth. MATERIALS AND METHODS: Eighty premolars were randomly allocated to four equal groups (n = 20): Group I: Control group, no preventive measures. Group II: CPP-ACP. Group III: Er,Cr:YSGG laser. Group IV: Er,Cr:YSGG laser followed by CPP-ACP. Specimens were subjected to thermocycling and brushing protocols equivalent to 1 year intraorally. Then, all teeth were subjected to acid challenge. Teeth were then sectioned longitudinally and examined under a polarized light microscope and lesion depth was measured. RESULTS: Group IV resulted in the least lesion depth with a significant difference between it and all other groups. CPP-ACP alone and laser alone also showed a significant difference in white spot lesion (WSL) depth compared to the control group; however, no significant difference was found between them. CONCLUSIONS: The combined use of laser and CPP-ACP showed the best prevention against WSL development. The use of CPP-ACP or laser alone also resulted in a significant reduction in lesion depth but was significantly less than their combined use, with no significant difference between them.

Treatment of various degrees of white spot lesions using resin infiltration-in vitro study.

BACKGROUND: This study was conducted to evaluate the efficiency of resin infiltration to improve the color of white spot lesions (WSLs) and to estimate the effect of different numbers of etching and resin infiltrant applications on the color change of WSLs with various depths. Ninety-six sound extracted premolars were subjected to acid attack inducing different depths of WSLs. Using a DIAGNOdent, teeth were divided into four main groups according to the depth of the WSLs: shallow enamel, deep enamel, shallow dentine, and deep dentine without cavitation. Then each of the main groups was subdivided into four groups: six teeth each with different protocols of resin infiltration as follows: 1 etching + 1 infiltrant application (EA), 1 etching + 2 infiltrant applications (EAA), 2 etchings + 1 infiltrant application (EEA), 2 etchings + 2 infiltrant applications (EEAA). Spectrophotometric analysis was measured at baseline (T0), after inducing the WSLs (T1), and following resin infiltration application (T2) for each group. RESULTS: In shallow enamel, EA produced the least mean color difference (1.62 ± 0.85), with high significant difference (P < 0.001), when compared with the clinically detectable threshold (ΔE = 3.7). While in deep enamel, EAA showed the least mean color change (1.95 ± 0.4), with P < 0.001 when compared with the critical value. Also, in shallow dentine, the least mean change was noticed with EAA (3.0 ± 0.45), with P < 0.001 when compared with the clinical color detection threshold. Furthermore, in deep dentine, EAA had the least mean difference (3.76 ± 0.6) but with no significant difference, when compared with the clinically detectable threshold. CONCLUSIONS: As the WSL got deeper, the color of the lesion became more clinically visible. In shallow enamel, the best treatment option was one etching with one resin infiltrant application. For deep enamel and shallow dentine, one etching with two applications of infiltrant gave the best lesion masking. In deep dentine, it is advisable to perform one etching with two infiltration steps, taking in consideration that all deep dentine lesions without cavitation were partially masked, remained clinically detectable, and might require more invasive restorative procedures.

Prediction of changes due to mandibular autorotation following miniplate-anchored intrusion of maxillary posterior teeth in open bite cases.

BACKGROUND: Prediction of the treatment outcome of various orthodontic procedures is an essential part of treatment planning. Using skeletal anchorage for intrusion of posterior teeth is a relatively novel procedure for the treatment of anterior open bite in long-faced subjects. METHODS: Data were analyzed from lateral cephalometric radiographs of a cohort of 28 open bite adult subjects treated with intrusion of the maxillary posterior segment with zygomatic miniplate anchorage. Mean ratios and regression equations were calculated for selected variables before and after intrusion. RESULTS: Relative to molar intrusion, there was approximately 100% vertical change of the hard and soft tissue mention and 80% horizontal change of the hard and soft tissue pogonion. The overbite deepened two folds with 60% increase in overjet. The lower lip moved forward about 80% of the molar intrusion. Hard tissue pogonion and mention showed the strongest correlations with molar intrusion. There was a general agreement between regression equations and mean ratios at 3 mm molar intrusion. CONCLUSIONS: This study attempted to provide the clinician with a tool to predict the changes in key treatment variables following skeletally anchored maxillary molar intrusion and autorotation of the mandible.

Long-term stability of soft tissue changes in anterior open bite adults treated with zygomatic miniplate-anchored maxillary posterior intrusion.

OBJECTIVES: To evaluate soft tissue changes and their long-term stability in skeletal anterior open bite adults treated by maxillary posterior teeth intrusion using zygomatic miniplates and premolar extractions. MATERIALS AND METHODS: Lateral cephalograms of 26 patients were taken at pretreatment (T1), posttreatment (T2), 1 year posttreatment (T3), and 4 years posttreatment (T4). RESULTS: At the end of treatment, the soft tissue facial height and profile convexity were reduced. The lips increased in length and thickness, with backward movement of the upper lip and forward movement of the lower lip. The total relapse rate ranged from 20.2% to 31.1%. At 4 years posttreatment, 68.9% to 79.8% of the soft tissue treatment effects were stable. The changes in the first year posttreatment accounted for approximately 70% of the total relapse. CONCLUSIONS: Soft tissue changes following maxillary posterior teeth intrusion with zygomatic miniplates and premolar extractions appear to be stable 4 years after treatment.

Evaluation of long-term stability of skeletal anterior open bite correction in adults treated with maxillary posterior segment intrusion using zygomatic miniplates.

INTRODUCTION: This study evaluated the long-term stability of maxillary molar intrusion and anterior open-bite correction in adults treated by maxillary posterior teeth intrusion with zygomatic miniplates. METHODS: The sample included 26 skeletal anterior open-bite patients, who had maxillary posterior segment intrusion with zygomatic miniplates. Lateral cephalograms were taken at pretreatment, posttreatment, 1 year posttreatment, and 4 years posttreatment. RESULTS: The mean maxillary molar intrusion was 3.04 mm (P ≤0.01), and the mean bite closure was 6.93 mm (P ≤0.01). The intruded maxillary molars relapsed by 10.20% in the first year after treatment and by 13.37% by 4 years after treatment. Overbite relapsed by 8.19% and 11.18% after 1 year and 4 years posttreatment, respectively. The first year after treatment accounted for 76.29% and 73.2% of the total relapses of molar intrusion and overbite, respectively. The 4-year posttreatment relapse amounts of maxillary molar intrusion and overbite were positively correlated with the amount of pretreatment maxillary molar height and the initial open-bite severity, respectively, but negatively correlated with the amounts of maxillary molar intrusion and open-bite correction gained by treatment. CONCLUSIONS: Molar intrusion with zygomatic miniplates appears to be stable 4 years after treatment.

Molar Intrusion in Open-bite Adults Using Zygomatic Miniplates.

The aim of this study is to evaluate the skeletal, dental and soft tissue changes that arise after intrusion of the maxillary molars using zygomatic miniplates in adult skeletal anterior open bite patients. In addition to measuring the amount and rate of molar intrusion; with special emphasis on changes in the axial inclination of the intruded molars. The study group was composed of 13 anterior open bite patients (mean age 18 years, 8 months ± 2 years, 2 months) with posterior dentoalveolar excess. Mini-plates were placed in the zygomatic buttress bilaterally. The upper arch was segmentally leveled and a double Trans-Palatal Arch (TPA) was bonded. Closed NiTi coil spring was placed bilaterally between the book of the mini-plate just mesial and distal to the first molar buccal tube applying intrusive force of 450 gper side. Lateral and posteroanterior cephalograms were taken before intrusion (T1: post upper segmental leveling) and after intrusion (T2). Comparison between means before and after the intrusion was done using Wilcoxon Signed Ranks test (WSRT). Mandibular autorotation followed the molar intrusion, SNB and SN-Pog angles significantly increased while the ANB, MP-SN angle and N-S-Gn angle significantly decreased. The mean amount of accomplished molar intrusion was 3.1mm ± 0.74mm, with a rate of 0.36mm per month ± 0.08mm per month and a bite closure of 6.55mm ± 1.83mm. There was no significant buccal tip in the right and left molars upon intrusion. Conclusion: Miniplates zygomatic anchorage can be used effectively for skeletal open bite correction through posterior dento-alveolar intrusion. Intrusion of the posterior teeth with skeletal anchorage induced counterclockwise rotation of the mandible and, as a consequence, corrected the anteroposterior intermaxillary relationship with a dramatic improvement in the facial soft tissue convexity.