ABSTRACT
Due to their persistence, polychlorinated biphenyls (PCBs) represent a group of important environmental pollutants, but conventional physicochemical decontamination techniques for their removal are usually expensive. The main aim of this work was to develop a cost-effective method for PCB bioremediation, focusing on contaminated water and utilizing the well-known degradation capability of Pleurotus ostreatus (the oyster mushroom). For this purpose, the conditions of several laboratory-scale reactors (working volume 1â¯L) were optimized. Spent oyster mushroom substrate obtained from a commercial farm was used as a fungal inoculum and growth substrate. The highest degradation efficiency (87%) was recorded with a continuous low-flow setup, which was subsequently scaled up (working volume 500â¯L) and used for the treatment of 4000â¯L of real contaminated groundwater containing 0.1-1⯵g/L of PCBs. This trickle-bed pilot-scale bioreactor was able to remove 82, 80, 65, and 30-50% of di-, tri-, tetra- and pentachlorinated PCB congeners, respectively. No degradation was observed for hexa- or heptachlorinated congeners. Multiple mono- and dichlorobenzoic acids (CBAs) were identified as transformation products by mass spectrometry, confirming the role of biodegradation in PCB removal. A Vibrio fischeri bioluminescence inhibition test revealed slight ecotoxicity of the primary reactor effluent (sampling after 24â¯h), which was quickly suppressed once the effluent passed through the reactor for the second time. Moreover, no other effluent exhibited toxicity for the rest of the experiment (71 days in total). Microbial analyses (phospholipid fatty acid analysis and next-generation sequencing) showed that P. ostreatus was able to degrade PCBs in the presence of an abundance of other fungal species as well as aerobic and anaerobic bacteria. Overall, this study proved the suitability of the use of spent oyster mushroom substrate in a bioremediation practice, even for pollutants as recalcitrant as PCBs.
Subject(s)
Environmental Pollutants , Pleurotus , Polychlorinated Biphenyls , Biodegradation, Environmental , BioreactorsABSTRACT
The white rot fungus Pleurotus ostreatus HK 35, which is also an edible industrial mushroom commonly cultivated in farms, was tested in the degradation of typical representatives of endocrine disrupters (EDCs; bisphenol A, estrone, 17ß-estradiol, estriol, 17α-ethinylestradiol, triclosan and 4-n-nonylphenol); its degradation efficiency under model laboratory conditions was greater than 90% within 12 days and better than that of another published strain P. ostreatus 3004. A spent mushroom substrate from a local farm was tested for its applicability in various batch and trickle-bed reactors in degrading EDCs in model fortified and real communal wastewater. The reactors were tested under various regimes including a pilot-scale trickle-bed reactor, which was finally tested at a wastewater treatment plant. The result revealed that the spent substrate is an efficient biodegradation agent, where the fungus was usually able to remove about 95% of EDCs together with suppression of the estrogenic activity of the sample. The results showed the fungus was able to operate in the presence of bacterial microflora in wastewater without any substantial negative effects on the degradation abilities. Finally, a pilot-scale trickle-bed reactor was installed in a wastewater treatment plant and successfully operated for 10days, where the bioreactor was able to remove more than 76% of EDCs present in the wastewater.
Subject(s)
Bioreactors/microbiology , Endocrine Disruptors/metabolism , Pleurotus/metabolism , Wastewater/chemistry , Water Pollutants, Chemical/metabolism , Biodegradation, Environmental , Endocrine Disruptors/analysis , Endocrine Disruptors/isolation & purification , Water Pollutants, Chemical/analysisABSTRACT
This study was performed to test the feasibility of several decontamination methods for remediating heavily contaminated groundwater in a real contaminated locality in the Czech Republic, where a pharmaceuticals plant has been in operation for more than 80 years. The site is polluted mainly by recalcitrant psychopharmaceuticals and monoaromatic hydrocarbons, such as benzene, toluene and chlorobenzene. For this purpose, an advanced oxidation technique employing UV radiation with hydrogen peroxide dosing was employed, in combination with simple aeration pretreatment. The results showed that UV/H2O2 was an efficient and necessary step for degradation of the pharmaceuticals; however, the monoaromatics were already removed during the aeration step. Characterization of the removal mechanisms participating in the aeration revealed that volatilization, co-precipitation and biodegradation contributed to the process. These findings were supported by bacterial metabolite analyses, phospholipid fatty acid analysis, qPCR of representatives of the degradative genes and detailed characterization of the formed precipitate using Mössbauer spectroscopy and scanning electron microscopy. Further tests were carried out in a continuous arrangement directly connected to the wells already present in the locality. The results documented the feasibility of combination of the photo-reactor employing UV/H2O2 together with aeration pretreatment for 4 months, where the overall decontamination efficiency ranged from 72% to 99% of the pharmaceuticals. We recorded even better results for the monoaromatics decontamination except for one month, when we encountered some technical problems with the aeration pump. This demonstrated the necessity of using the aeration step.
Subject(s)
Environmental Pollution/prevention & control , Groundwater , Water Pollutants, Chemical , Benzene , Biodegradation, Environmental , Chlorobenzenes , Czech Republic , Hydrogen Peroxide , Pharmaceutical Preparations , TolueneABSTRACT
Significant efforts have been committed to the research and development of many advanced oxidation processes, including photocatalytic oxidations with titanium dioxide or the hydrogen peroxide and ferrous/ferric ion (H2O2/Fe2+(Fe3+)/UV (photo-assisted Fenton) process. This study reports the development of a novel photochemical system for complex treatment of heavily contaminated wastewaters based on the use of UV-C light and H2O2. Special attention was focused on the technology employed, including the reactor design, process controls, and performance optimization. The effects of process parameters were studied using 4-chlorophenol (4CP) as model compound, and verification of this treatment technology was assessed using actual contaminated water. Among the most influential parameters were the 4CP concentration, reaction mixture volume, H2O2 concentration, and irradiation intensity. In contrast, for H2O2 dosing (proportional continuous or cumulative one-time), the flow rate did not significantly affect process efficacy.