Interfacial Charge Transfer in Dye-Sensitized Solar Cells Using SCN-Free Terpyridine-Coordinated Ru Complex Dye and Co Complex Redox Couples.

The efficiency of dye-sensitized solar cells (DSSCs) using Ru complex dyes and Co complex redox couples has been increased with a strategy to prevent charge recombination via the addition of bulky or lengthy peripheral units to the dyes. However, despite the efforts, most of the DSSCs are still suffering from nonunity quantum efficiency and fast recombination. We examine the effect of SCN ligand, which has been used for many Ru complex dyes and could attract positively charged Co complexes. We find that replacing the ligands with 2,6-bis(2'-(4'-trifluoromethyl)pyrazolyl)pyridine increases the quantum efficiency and electron lifetime. With the combination of the replacement of SCN ligands and the addition of bulky moiety, ∼80% external quantum efficiency is achieved. These suggest that not only the addition of a blocking effect but also the reduction of electrostatic and dispersion forces between dyes and Co complexes are essential to control the charge separation and recombination processes.

Molecular engineering of zinc phthalocyanine sensitizers for efficient dye-sensitized solar cells.

Asymmetric zinc phthalocyanines with alkyl chain substituents formed highly efficient light-harvesting layers on a TiO2 surface. Dye-sensitized solar cells using PcS20 exhibited a record efficiency of 6.4% under one-sun irradiation.

Molecular design rule of phthalocyanine dyes for highly efficient near-IR performance in dye-sensitized solar cells.

A series of zinc-phthalocyanine sensitizers (PcS16-18) with different adsorption sites have been designed and synthesized in order to investigate the dependence of adsorption-site structures on the solar-cell performances in zinc-phthalocyanine based dye-sensitized solar cells. The change of adsorption site affected the electron injection efficiency from the photoexcited dye into the nanocrystalline TiO2 semiconductor, as monitored by picosecond time-resolved fluorescence spectroscopy. The zinc-phthalocyanine sensitizer PcS18, possessing one carboxylic acid directly attached to the ZnPc ring and six 2,6-diisopropylphenoxy units, showed a record power conversion efficiency value of 5.9 % when used as a light-harvesting dye on a TiO2 electrode under one simulated solar condition.

Improvement of TiO2/dye/electrolyte interface conditions by positional change of alkyl chains in modified panchromatic Ru complex dyes.

A series of panchromatic ruthenium sensitizers (MJ sensitizers) with attached thiophene and phenyl units bearing alkyl chains was synthesized. A new synthetic route was used to examine all possible positions for the alkyl chains. The absorption spectra showed the sum of a ruthenium complex and peripheral organic chromophore units. The hypochromic effect and blueshift of the metal-to-ligand charge-transfer band observed in the modified ruthenium sensitizers were suppressed by changing the positions of the alkyl chains on the attached thiophene ring. Changing only one alkyl chain also influenced the performance of dye-sensitized solar cells. Ruthenium sensitizer MJ-10 with bulky substituent harvests visible and near-infrared light, and solar cells sensitized by MJ-10 exhibit an efficiency of 9.1% under 1 sun irradiation.

Solid-state dye-sensitized solar cells fabricated by coupling photoelectrochemically deposited poly(3,4-ethylenedioxythiophene) (PEDOT) with silver-paint on cathode.

A PEDOT-based dye-sensitized solar cell (DSC) is successfully improved by coupling photoelectrochemically deposited PEDOT layer with an Ag paste-paint on the cathode. With a 9.3 µm thick mesoscopic nanocrystalline TiO(2) film, a maximum cell performance of 3.2% with relatively high V(oc) of around 780 mV is achieved.

Synthesis and characterization of ZnO and ZnO:Ga films and their application in dye-sensitized solar cells.

Highly crystalline ZnO and Ga-modified zinc oxide (ZnO:Ga) nanoparticles containing 1, 3 and 5 atom% of Ga3+ were prepared by precipitation method at low temperature. The films were characterized by XRD, BET, XPS and SEM. No evidence of zinc gallate formation (ZnGa2O4), even in the samples containing 5 atom% of gallium, was detected by XRD. XPS data revealed that Ga is present into the ZnO matrix as Ga3+, according to the characteristic binding energies. The particle size decreased as the gallium level was increased as observed by SEM, which might be related to a faster hydrolysis reaction rate. The smaller particle size provided films with higher porosity and surface area, enabling a higher dye loading. When these films were applied to dye-sensitized solar cells (DSSCs) as photoelectrodes, the device based on ZnO:Ga 5 atom% presented an overall conversion efficiency of 6% (at 10 mW cm(-2)), a three-fold increase compared to the ZnO-based DSSCs under the same conditions. To our knowledge, this is one of the highest efficiencies reported so far for ZnO-based DSSCs. Transient absorption (TAS) study of the photoinduced dynamics of dye-sensitized ZnO:Ga films showed that the higher the gallium content, the higher the amount of dye cation formed, while no significant change on the recombination dynamics was observed. The study indicates that Ga-modification of nanocrystalline ZnO leads to an improvement of photocurrent and overall efficiency in the corresponding device.

Influence of doped anions on poly(3,4-ethylenedioxythiophene) as hole conductors for iodine-free solid-state dye-sensitized solar cells.

Poly(3,4-ethylenedioxythiophene) (PEDOT) is an excellent hole-conducting polymer able to replace the liquid I(-)/I3(-) redox electrolyte in dye-sensitized solar cells (DSCs). In this work we applied the in situ photoelectropolymerization technique to synthesize PEDOT and carried out a careful analysis of the effect of different doping anions on overall solar cell performance. The anions analyzed in this work are ClO4(-), CF3SO3(-), BF4(-), and TFSI(-). The best solar cell performance was observed when the TFSI(-) anion was used. Photoelectrochemical and impedance studies reveal that the doped anions in the PEDOT hole conductor system have great influences on I-V curves, conductivity, and impedance. The optimization of these parameters allowed us to obtain an iodine-free solid-state DSC with a maximum J(sc) of 5.3 mA/cm2, V(oc) of 750 mV, and a conversion efficiency of 2.85% which is the highest efficiency obtained so far for an iodine-free solid-state DSC using PEDOT as hole-transport material.

Dye-sensitized TiO2 solar cells using imidazolium-type ionic liquid crystal systems as effective electrolytes.

A novel ionic liquid crystal (ILC) system (C(12)MImI/I(2)) with a smectic A phase used as an electrolyte for a dye-sensitized solar cell (DSSC) showed the higher short-circuit current density (J(SC)) and the higher light-to-electricity conversion efficiency than the system using the non-liquid crystalline ionic liquid (C(11)MImI/I(2)), due to the higher conductivity of ILC. To investigate charge transport properties of the electrolytes in detail, the exchange reaction-based diffusion coefficients (D(ex)) were evaluated. The larger D(ex) value of ILC supported that the higher conductivity of ILC is attributed to the enhancement of the exchange reaction between iodide species. As a result of formation of the two-dimensional electron conductive pathways organized by the localized I(3)- and I- at S(A) layers, the concentration of polyiodide species exemplified by I(m)- (m = 5, 7, ...) was higher in C(12)MImI/I(2). However, as the increment of the concentration of polyiodide species is less than that of D(ex), the contribution of a two-dimensional structure of the conductive pathway through the increase of collision frequency between iodide species was proposed. Furthermore, a quasi-solid-state ionic liquid crystal DSSC was successfully fabricated by employing a low molecular gelator. Addition of the 5.0 g/L gelator to ILC improved light-to-electricity conversion efficiency through the increase of J(SC) due to the enhancement of the conductivity in C(12)MImI/I(2)-gel.

Sputtered Nb2O5 as an effective blocking layer at conducting glass and TiO2 interfaces in ionic liquid-based dye-sensitized solar cells.

The thin Nb(2)O(5) layer works as a remarkable blocking layer when deposited by the rf magnetron sputtering method between fluorine-doped tin oxide and a mesoporous TiO(2) layer, improving open-circuit photovoltage (V(oc)) and fill factor (FF) with power conversion efficiency over 5.5% at 1 sun irradiation of the dye-sensitized TiO(2) solar cells using ionic liquid electrolytes.

Deposition of a thin film of TiOx from a titanium metal target as novel blocking layers at conducting glass/TiO2 interfaces in ionic liquid mesoscopic TiO2 dye-sensitized solar cells.

In dye-sensitized TiO2 solar cells, charge recombination processes at interfaces between fluorine-doped tin oxide (FTO), TiO2, dye, and electrolyte play an important role in limiting the photon-to-electron conversion efficiency. From this point of view, a high work function material such as titanium deposited by sputtering on FTO has been investigated as an effective blocking layer for preventing electron leakage from FTO without influencing electron injection. X-ray photoelectron spectroscopy analysis indicates that different species of Ti (Ti4+, Ti3+, Ti2+, and a small amount of Ti0) exist on FTO. Electrochemical and photoelectrochemical measurements reveal that thin films of titanium species, expressed as TiOx, work as a compact blocking layer between FTO and TiO2 nanocrystaline film, improving Voc and the fill factor, finally giving a better conversion efficiency for dye-sensitized TiO2 solar cells with ionic liquid electrolytes.

Electron transport analysis for improvement of solid-state dye-sensitized solar cells using poly(3,4-ethylenedioxythiophene) as hole conductors.

Dye-sensitized solar cells (DSCs) using solid-state hole conductor, poly(3,4-ethylenedioxythiophene) (PEDOT), were fabricated using in-situ photoelectrochemical polymerization giving short-circuit photocurrent density of 3.20 mA cm-2, open-circuit voltage of 0.77 V, and fill factor of 0.50, and the resulting overall conversion efficiency of 1.25% on average under air mass 1.5 conditions. Furthermore, the electron transport properties of the DSCs based on PEDOT (PEDOT/DSCs) were analyzed using light intensity modulation induced photocurrent and photovoltage decay (SLIM-PCV) measurements and electrochemical impedance spectroscopy (EIS) measurements, and then compared to those of the DSCs based on organic liquid electrolyte containing I-/I3- as redox couple (liquid iodide/iodine electrolyte-DSCs, iodide/DSCs for short). The effective filling of PEDOT in the mesopores of dyed TiO2 layers is an important key to achieve the respectable conversion efficiency of PEDOT/DSCs that is comparable with iodide/DSCs.

A novel ruthenium sensitizer with a hydrophobic 2-thiophen-2-yl-vinyl-conjugated bipyridyl ligand for effective dye sensitized TiO2 solar cells.

A hydrophobic and 2-thiophen-2-yl-vinyl-conjugated ruthenium complex, cis-Ru(dhtbpy)(dcbpy)(NCS)2 [dhtbpy = 4,4'-di(hexylthienylvinyl)-2,2'-bipyridyl; dcbpy = 4,4'-dicarboxy-2,2'-bipyridyl], was newly designed, synthesized and applied successfully to sensitization of nanocrystalline TiO2-based solar cells, giving a conversion efficiency of 9.5% under irradiation with AM 1.5 solar light.

Dye-sensitized TiO2 nanotube solar cells: fabrication and electronic characterization.

TiO2 nanotubes (TNTs) with large aspect ratio and large specific surface area were prepared from P25 (Nippon Aerosil) and applied to dye-sensitized titanium dioxide solar cells (DSSCs). Optimization of fabrication conditions, i.e., pH of the starting paste, sintering temperature for the TiO2 electrodes, electrolyte compositions of DSSCs gave the high conversion efficiency with improved open circuit voltage (V(oc)) and fill factor (FF) when compared to DSSCs made of P25. The evaluation of dye adsorption and the photo-injected electron transport such as electron diffusion coefficient (D) and electron lifetime (tau) in TNTs electrodes revealed that the higher efficiency resulted from increase of electron density with keeping much longer tau in TNTs electrodes than in P25 electrodes.