Microscopic Observation of the Anisotropy of the Johari-Goldstein-ß Process in Cross-Linked Polybutadiene on Stretching by Time-Domain Interferometry.

The strain dependence of the Johari-Goldstein (JG)-ß relaxation time, as well as the directional dependence, was systematically investigated for stretched cross-linked polybutadiene using time-domain interferometry. We found that the strain dependence of the JG-ß relaxation time is directionally dependent, contrary to expectation: the relaxation time of the JG-ß motion, whose displacement is perpendicular to the stretching direction, decreases with stretching, whereas the relaxation time of the parallel JG-ß motion changes little. This result is distinct from the previously reported strain dependence of the α relaxation time, where the relaxation time increases isotropically with stretching. Thus, the difference in the strain dependence of the relaxation time between the α and JG-ß processes suggests a microscopic origin and requires the modification of the conventional dynamic picture for stretched polymers.

Insights into the cavitation morphology of rubber reinforced with a nano-filler.

Notwithstanding the various uses of rubber, the fracture mechanism of filler-reinforced rubber remains unclear. This study used four-dimensional computed tomography (4D-CT) involving monochromatic synchrotron X-rays to examine the cavitation within silica-reinforced rubber quantitatively and systematically. The results suggested a threshold value of silica content for the cavitation morphology. Macroscopic fractures, such as those developed by void formation, occurred below the threshold value of silica content. Above this threshold, the density of rubber decreased but macroscopic voids rarely occurred. The lower-density rubber area in the high-silica-content rubber was reversible at the effective pixel size for 4D-CT. These results suggest that the growth of the damage points to macrosized voids could be stopped by the formation of a network of rigid polymer layers. This study allows the elucidation of the reinforcing mechanism and the cavitation morphology of filler-reinforced rubber.

Microscopic observation of the effects of elongation on the polymer chain dynamics of crosslinked polybutadiene using quasi-elastic γ-ray scattering.

A synchrotron-radiation-based quasi-elastic γ-ray scattering system has been developed that uses time-domain interferometry to observe microscopic polymer dynamics under uniaxial deformation. The stress-producing mechanism of crosslinked polybutadiene has been studied from a microscopic viewpoint. It was found that the mean relaxation time ⟨τ⟩ of the microscopic polymer motion observed over a relatively high temperature (T) range (i.e. T-1 < 0.0045 K-1) increased with elongation on both the intra- and intermolecular scales. Following an extensive strain dependence study, it was found that the strain dependences of both the intra- and intermolecular ⟨τ⟩ changed with the stress dependence. It was therefore suggested that ⟨τ⟩ increased due to the constraint of the local polymer chain motion caused by elongation. The local molecular dynamics of polymer chains under uniaxial deformation could be evaluated at intra- and intermolecular scales separately for the first time using our method.

High-speed rotating device for X-ray tomography with 10 ms temporal resolution.

The temporal resolution of X-ray tomography, using a synchrotron radiation X-ray source, has been improved to millisecond order in recent years. However, the sample must be rotated at a speed of more than a few thousand revolutions per minute, which makes it difficult to control the environment around the sample. In this study, a high-speed rotation device has been developed, comprising two synchronized coaxial motors movable along the direction of the axis, which can stretch or compress the rotating sample. Using this device, tomograms of breaking rubber were successfully obtained at a temporal resolution of 10 ms.

Quasielastic neutron scattering study of microscopic dynamics in polybutadiene reinforced with an unsaturated carboxylate.

We studied the dynamics of zinc diacrylate (ZDA) reinforced polybutadiene rubber (BR) (ZDA/BR) using the quasielastic neutron scattering technique to determine the effect of concentration of ZDA on polymer dynamics. First, we evaluated the temperature dependence of mean square displacements (〈u2〉) for ZDA/BR with different ZDA volume fractions. 〈u2〉 increased with temperature below 170 K, and we observed no significant ZDA volume fraction dependence. However, it increased more steeply above 170 K, and the value of 〈u2〉 was smaller for the samples with increasing ZDA fraction. To elucidate the origin of the decrease in 〈u2〉 with increasing ZDA content, dynamic scattering laws (S(Q,ω)) were analyzed. An increase in the elastic component, an increase in the mean relaxation time, and a broadening of distribution of relaxation time were observed with the increasing volume fraction of ZDA. In addition, the ZDA volume fraction dependence of the elastic component roughly corresponded to that of elastic modulus, indicating that the elastic component is related to its mechanical strength. Referring to the previously reported static structure of the present ZDA/BR system, a model for the heterogeneous BR dynamics was proposed. This model assumes the coexistence of immobile, mobile, and interfacial constrained mobile regions. It was found to be appropriate for the explanation of the observed dynamics. We proposed that a network-like structure of the BR having a high crosslinking density around ZDA aggregates is mainly responsible for the high elastic modulus of ZDA/BR.

Contrast variation by dynamic nuclear polarization and time-of-flight small-angle neutron scattering. I. Application to industrial multi-component nanocomposites.

Dynamic nuclear polarization (DNP) at low temperature (1.2 K) and high magnetic field (3.3 T) was applied to a contrast variation study in small-angle neutron scattering (SANS) focusing on industrial rubber materials. By varying the scattering contrast by DNP, time-of-flight SANS profiles were obtained at the pulsed neutron source of the Japan Proton Accelerator Research Complex (J-PARC). The concentration of a small organic molecule, (2,2,6,6-tetramethylpiperidine-1-yl)oxy (TEMPO), was carefully controlled by a doping method using vapour sorption into the rubber specimens. With the assistance of microwave irradiation (94 GHz), almost full polarization of the paramagnetic electronic spin of TEMPO was transferred to the spin state of hydrogen (protons) in the rubber materials to obtain a high proton spin polarization (PH). The following samples were prepared: (i) a binary mixture of styrene-butadiene random copolymer (SBR) with silica particles (SBR/SP); and (ii) a ternary mixture of SBR with silica and carbon black particles (SBR/SP/CP). For the binary mixture (SBR/SP), the intensity of SANS significantly increased or decreased while keeping its q dependence for PH = -35% or PH = 40%, respectively. The q behaviour of SANS for the SBR/SP mixture can be reproduced using the form factor of a spherical particle. The intensity at low q (∼0.01 Å-1) varied as a quadratic function of PH and indicated a minimum value at PH = 30%, which can be explained by the scattering contrast between SP and SBR. The scattering intensity at high q (∼0.3 Å-1) decreased with increasing PH, which is attributed to the incoherent scattering from hydrogen. For the ternary mixture (SBR/SP/CP), the q behaviour of SANS was varied by changing PH. At PH = -35%, the scattering maxima originating from the form factor of SP prevailed, whereas at PH = 29% and PH = 38%, the scattering maxima disappeared. After decomposition of the total SANS according to inverse matrix calculations, the partial scattering functions were obtained. The partial scattering function obtained for SP was well reproduced by a spherical form factor and matched the SANS profile for the SBR/SP mixture. The partial scattering function for CP exhibited surface fractal behaviour according to q-3.6, which is consistent with the results for the SBR/CP mixture.

Loading effect on swelling of nematic elastomers.

Externally imposed loading has substantially different effects on the swelling of nematic elastomers in the high-temperature isotropic and low-temperature nematic states. In the isotropic state, the stretching drives a considerably large degree of further swelling, whereas the stretching-induced volume change in the nematic state is significantly suppressed. In the isotropic phase that favors the less anisotropic state, the further swelling occurs to reduce the shape anisotropy caused by the imposed elongation. In the nematic phase, no significant swelling is induced because further swelling decreases the nematic order enhanced by the applied stretching. These different loading effects in the isotropic and nematic states observed in the experiments are qualitatively described by a mean field theory.