Green Synthesis and Characterization of Silver Nanoparticles Using Citrullus lanatus Fruit Rind Extract.

The wide-scale application of silver nanoparticles (AgNPs) in areas such as chemical sensing, nanomedicine, and electronics has led to their increased demand. Current methods of AgNPs synthesis involve the use of hazardous reagents and toxic solvents. There is a need for the development of new methods of synthesizing AgNPs that use environmentally safe reagents and solvents. This work reports a green method where silver nanoparticles (AgNPs) were synthesized using silver nitrate and the aqueous extract of Citrullus lanatus fruit rind as the reductant and the capping agent. The optimized conditions for the AgNPs synthesis were a temperature of 80°C, pH 10, 0.001 M AgNO3, 250 g/L watermelon rind extract (WMRE), and a reactant ratio of 4 : 5 (AgNO3 to WMRE). The AgNPs were characterized by Ultraviolet-Visible (UV-Vis) spectroscopy exhibiting a λmax at 404 nm which was consistent with the spectra of spherical AgNPs within the wavelength range of 380-450 nm, and Cyclic Voltammetry (CV) results showed a distinct oxidation peak at +291 mV while the standard reference AgNPs (20 nm diameter) oxidation peak occurred at +290 mV, and Transmission Electron Microscopy (TEM) revealed spherical shaped AgNPs. The AgNPs were found to have an average diameter of 17.96 ± 0.16 nm.

Supercritical CO2 mediated incorporation of Pd onto templated carbons: a route to optimizing the Pd particle size and hydrogen uptake density.

Palladium nanoparticles are deposited onto zeolite template carbon (ZTC) via supercritical CO2 (scCO2) mediated hydrogenation of a CO2-phillic transition metal precursor. The supercritical fluid (SCF) mediated metal incorporation approach enabled the decoration of ZTC with 0.2-2.0 wt % of well-dispersed Pd nanoparticles of size 2-5 nm. The resulting Pd-doped ZTCs exhibit enhanced hydrogen uptake and storage density. The ZTC (with surface area of 2046 m(2)/g) had a hydrogen storage capacity (at 77 K and 20 bar) of 4.9 wt %, while the Pd-ZTCs had uptake of 4.7-5.3 wt % despite a surface area in the range 1390-1858 m(2)/g. The Pd-ZTCs thus exhibit enhanced hydrogen storage density (14.3-18.3 µmol H2/m(2)), which is much higher than that of Pd-free ZTC (12.0 µmol H2/m(2)). The hydrogen isosteric heat of adsorption (Qst) was found to be higher for the Pd-doped carbons (6.7 kJ/mol) compared to the parent ZTC (5.3 kJ/mol). The deposition of small amounts of Pd (up to 2 wt %) along with well-dispersed Pd nanoparticles of size of 2-5 nm is essential for the enhancement of hydrogen uptake and illustrates the importance of optimizing the balance between metal loading/particle size and surface area to achieve the best metal/porous carbon composite for enhanced hydrogen uptake.