Preparation and characterization of Arenga pinnata thermoplastic starch/bacterial cellulose nanofiber biocomposites via in-situ twin screw extrusion.

Thermoplastic starch (TPS) is considered as alternative material for substitute petroleum-based materials for single-use packaging material applications. The main weakness of TPS is sensitive to water and humidity which causes low mechanical properties and low thermal resistance. To address this limitation, one can enhance the strength is by incorporating cellulose nanofiber as a reinforcing agent. Cellulose nanofiber used in this study is bacterial cellulose, synthesized from tapioca liquid waste media, namely Nata de Cassava (NDCass). The effect of NDCass addition to TPS on chemical characteristics, physical properties, crystallinity, mechanical properties, and thermal properties was investigated. As the results, NDCass incorporation has no significant effect on the chemical structure and crystal structure of composites as observed by FTIR and XRD analysis. Incorporating of NDCass improved the mechanical properties by 37.3 %, the thermal stability, and the viscosity, however reduced the elongation at break by 65.6 %, the density, the melt flow and shear rate of TPS biocomposite. This study evidently that starch from Arenga pinnata trunk and bacterial cellulose from tapioca liquid waste can be manufactured into biocomposites using in-situ twin screw extrusion which beneficial for large-scale applications.

Controlling the critical parameters of ultrasonication to affect the dispersion state, isolation, and chiral nematic assembly of cellulose nanocrystals.

Cellulose nanocrystals (CNCs) are typically extracted from plants and present a range of opto-mechanical properties that warrant their use for the fabrication of sustainable materials. While their commercialization is ongoing, their sustainable extraction at large scale is still being optimized. Ultrasonication is a well-established and routinely used technology for (re-) dispersing and/or isolating plant-based CNCs without the need for additional reagents or chemical processes. Several critical ultrasonication parameters, such as time, amplitude, and energy input, play dominant roles in reducing the particle size and altering the morphology of CNCs. Interestingly, this technology can be coupled with other methods to generate moderate and high yields of CNCs. Besides, the ultrasonics treatment also has a significant impact on the dispersion state and the surface chemistry of CNCs. Accordingly, their ability to self-assemble into liquid crystals and subsequent superstructures can, for example, imbue materials with finely tuned structural colors. This article gives an overview of the primary functions arising from the ultrasonication parameters for stabilizing CNCs, producing CNCs in combination with other promising methods, and highlighting examples where the design of photonic materials using nanocrystal-based celluloses is substantially impacted.

Tensile Strength Improvements of Ramie Fiber Threads through Combination of Citric Acid and Sodium Hypophosphite Cross-Linking.

Ramie (Boehmeria nivea) is believed to be one of the strongest natural fibers, but it still remains behind synthetic materials in terms of tensile strength. In this study, ramie materials were prepared to evaluate the modification crosslinking effect of natural fiber. The aim is to optimize various concentrations of citric acid (CA) crosslinking by adding Sodium hypophosphite (NaPO2H2), which is activated at different temperatures, to obtain the highest tensile mechanical strength. This crosslinking effect has been confirmed by FTIR to show the esterification process in the molecular structure of cellulose. The changes in the character of the fiber surface were analyzed by SEM. The tensile strength increased from 62.33 MPa for 0% CA to 124-172.86 MPa for decorticated fiber with a CA concentration of 0.75-1.875% (w/w). A significant increase in tensile strength was observed more than 19 times when CA/SHP 1% was treated at an activation temperature of 110 °C with a superior tensile strength of 1290.63. The fiber crosslinked with CA/SHP should be recommended for application of Natural Fiber Reinforced Polymer Composite (NFRPC), which has the potential to use in functional textile and industrial sector automotive or construction.

Hydrothermal effect of gunningite use Pluronic F127-Gelatin as template and the ibuprofen adsorption performance.

The gunningite has been successfully synthesized using Pluronic F127 and gelatin as template via hydrothermal at 100-200 °C for 12-48 h. By scanning electron microscopy, nitrogen adsorption-desorption, and X-ray diffraction, changes in structure, pore size, and morphology due to ibuprofen adsorption were investigated in gunningite. Various hydrothermal (temperature and time) parameters had an influence on the percentage elimination (%) of ibuprofens. Gunningite's specific surface area intensifies from 14.60 to 24.03 m2/g as the longer hydrothermal time. In batch adsorption studies, the resulting sample was conducted to isotherm and kinetic analysis to evaluate the distribution of ibuprofen between the liquid and solid phases. Pseudo-first-order kinetics with an adsorption capacity range of 27-34.5 mg g-1 were the best fit for the observed data. Consequently, gunningite may be considered a viable adsorbent for the large-scale treatment of water contaminated with ibuprofen and related anti-inflammatory medicines.

Multiple response optimizations on the leached-spray-dried bancha green tea towards healthy ageing.

Bancha is a popular type of green tea in Japan, rich in tea polyphenols (TPs) and has a more astringent aroma with a less aromatic and strong character that complements functional foods. The blanching process is used to extract TPs and remove unwanted microorganisms, as well as inhibit phenolic oxidation. This study proposed a green tea blanching process followed by spray drying the extracts with maltodextrin. Furthermore, it is focused on maximizing the major chemical components of green tea (i.e., catechins, caffeine, and phenolic contents) based on powder particle size obtained through Multiple Response Surface Methodology optimizations. The results show that the proposed model accurately predicts leached-spray dried green tea's total catechin and caffeine content, with a coefficient of 0.9475 and 0.8692, respectively. This process yielded composite desirability of 0.9751, while individual desirability yielded excellent results of 1.0000, 0.9188, 1.0000, and 0.9839 for catechin, caffeine, phenol content, and powder. The settings appear to yield functional results for entire responses. Due to the concerns in tropical skin nutrition applications, smaller particle size green tea can promote better adsorption than larger sizes.

Characterization of Antimicrobial Composite Edible Film Formulated from Fermented Cheese Whey and Cassava Peel Starch.

Antimicrobial composite edible film can be a solution for environmentally friendly food packaging, which can be made from fermented cheese whey containing an antimicrobial agent and cassava peel waste that contains starch. The research aims to determine the formulation of fermented cheese whey and cassava peel waste starch, resulting in an antimicrobial composite edible film with the best physical, mechanical, and water vapour permeability (WVP) properties, as well as with high antimicrobial activity. This research was conducted using experimental methods with nine composite edible film formulation treatments with three replications. Three variations in the fermented cheese whey and cassava peel starch ratio (v/v) (1:3, 1:1, 3:1) were combined with variations in the addition of glycerol (20%, 33%, 45%) (w/w) in the production of the composite edible film. Then, the physical characteristics such as elongation at break, tensile strength, WVP, colour, and antimicrobial effect of its film-forming solution were observed. The results showed that 24 h of whey fermentation with Candida tropicalis resulted in an 18.50 mm inhibition zone towards Pseudomonas aeruginosa. The best characteristic of the film was obtained from the formulation of a whey:starch ratio of 1:3 and 33% glycerol, which resulted in a thickness value of 0.21 mm, elongation at break of 19.62%, tensile strength of 0.81 N/mm2, WVP of 3.41 × 10-10·g/m·s·Pa at a relative humidity (RH) of 100%-35%, and WVP of 9.84 × 10-10·g/m·s·Pa at a RH of 75%-35%, with an antimicrobial activity towards P. aeruginosa of 5.11 mm.

Panel Products Made of Oil Palm Trunk: A Review of Potency, Environmental Aspect, and Comparison with Wood-Based Composites.

Oil palm plantations have expanded rapidly in Southeast Asia, particularly in Indonesia and Malaysia. A lot of products, including food and other edible products, oleo-chemicals, cosmetics, personal and household care, pharmaceutical products, and biodiesels are derived from palm oil, thus making them one of the most economically important plants. After 25-30 years of age, the palms are felled and replaced due to declining oil production. Oil palm trunks (OPT) are considered significant waste products. The trunks remain on the plantation site for nutrient recycling or burning. This increases insect and fungi populations causing environmental problems for the new palm generation or air pollution due to the fire. Up till now, OPT has received less attention in research studies. Therefore, this review summarizes the utilization of OPT into products made of oil palm fibers mainly derived from OPT and its application as the substitution of wood panel products. Some research works have been carried out on oil palm fibers that are derived from OPT for exploiting their potential as raw material of composite panel products, which is the objective of this review. Areas of development are processed into various conventional composite panel products such as plywood and laminated board which are usually predominantly made of wood and bonded by synthetic resins, particleboard with binder, or binderless and cement board which is arranged with wood as a minor component. All of the products have been presented and described technically according to best knowledge of the authors and literature review.

Effect of harvesting age of plant and pectinolytic selected-fungi in biodegumming ramie performance.

Ramie is one of the long natural fiber has strong mechanical properties. To improve the quality of ramie fiber, this study developed a bio degumming method from superior isolates of pectinolytic fungi Rhizopus sp. and optimization of raw fiber based on harvesting time. The results of the pectinolytic fungi selection were used as a bio degumming bio starter under optimum conditions of pH and temperature. Also, fiber material harvested at 50-day and 60- day to obtain an increase in the physical quality. The bio degummed fiber was analysed to determine the tenacity and fineness, the functional groups contained, thermal analysis, moisture regain and content, material polymers, and degree of crystallinity. Based on the results, the finest ramie properties with 50-day harvested fiber are as follows: strength 24.54 ± 0, 02 g/tex, elongation 12.04 ± 2,90%, fineness 1.33 ± 0,17 tex, moisture regain 8.23 ± 0,18 %, and moisture content 8.96 ± 0,21 %. Ramie fibers at initial conditions and after bio degumming at 50 and 60-day harvested had the same pattern of thermal stability. The dyeability test showed that the degummed 60-day harvested fibers has the greatest dye fixing ability. The bio degumming process with this method can improve the quality and dyeability of the rami fiber which can be used for future applications.

Effect of Oxidation Time on the Properties of Cellulose Nanocrystals Prepared from Balsa and Kapok Fibers Using Ammonium Persulfate.

This study aimed to evaluate the effect of ammonium persulfate's (APS) oxidation time on the characteristics of the cellulose nanocrystals (CNCs) of balsa and kapok fibers after delignification pretreatment with sodium chlorite/acetic acid. This two-step method is important for increasing the zeta potential value and achieving higher thermal stability. The fibers were partially delignified using acidified sodium chlorite for four cycles, followed by APS oxidation at 60 °C for 8, 12, and 16 h. The isolated CNCs with a rod-like structure showed an average diameter in the range of 5.5-12.6 nm and an aspect ratio of 14.7-28.2. Increasing the reaction time resulted in a gradual reduction in the CNC dimensions. The higher surface charge of the balsa and kapok CNCs was observed at a longer oxidation time. The CNCs prepared from kapok had the highest colloid stability after oxidation for 16 h (-62.27 mV). The CNCs with higher crystallinity had longer oxidation times. Thermogravimetric analysis revealed that the CNCs with a higher thermal stability had longer oxidation times. All of the parameters were influenced by the oxidation time. This study indicates that APS oxidation for 8-16 h can produce CNCs from delignified balsa and kapok with satisfactory zeta potential values and thermal stabilities.

Novel antimicrobial bioplastic based on PLA-chitosan by addition of TiO2 and ZnO.

PURPOSE: The purpose of this study was to develop antimicrobial bioplastics based on Poly Lactic Acid (PLA) with the addition of chitosan-ZnO, and chitosan-TiO2 to improve antimicrobial properties. METHODS: For the preparation of the bioplastics, PLA with chitosan-ZnO or chitosan-TiO2 were used. The antimicrobial activity, mechanical and thermal properties, and water vapor permeability of bioplastics were evaluated. RESULTS: PLA-chitosan-ZnO indicated a robust antimicrobial activity against bacteria such as Salmonella typhi, Bacillus subtilis, Escherichia coli, Staphylococcus aureus, yeast such as Candida albicans, and fungus Aspergillus niger. No formation of new functional groups in PLA-chitosan-ZnO composites. In comparison to other PLA-based bioplastics, this bioplastic has medium tensile strength, tensile modulus, and elongation percentages with low barrier ability to water vapor. Chitosan-ZnO itself has a greater tensile strength compared to chitosan-TiO2. These two compounds undergo 2 stages of decomposition in a temperature range of 43 °C to 265 °C. The addition of PLA into chitosan-ZnO or chitosan TiO2 causes the bioplastics decomposed in a single stage. It also increases the decomposition temperature of bioplastic. However, compared to chitosan-ZnO or TiO2, the PLA-chitosan-ZnO or TiO2 bioplastics tend to produce a fragile composite indicating by decrease in their tensile strength. CONCLUSION: In general, the addition of chitosan-ZnO into in PLA-based bioplastic produces better antimicrobial properties compared to TiO2.

Properties of wood composite plastics made from predominant Low Density Polyethylene (LDPE) plastics and their degradability in nature.

To address concerns over plastics in the global environment, this project produced three wood plastics composites (WPCs) which could divert plastics from the waste stream into new materials. The three materials made had a ratio of 85%:15%, 90%:10%, and 95%:5% low density polyethylene (LDPE) to wood powder and were produced using the dissolution method. Physical and mechanical properties of each WPC were evaluated according to Japanese Industrial Standard (JIS) A 5908:2003. Their degradation in nature was evaluated through a graveyard test and assay test conducted in Coptotermes curvignathus termites. Results showed that density, moisture content, thickness swelling and water absorption of the WPCs fulfilled the JIS standard. The mechanical properties of these composites also met the JIS standard, particularly their modulus of elasticity (MOE). Modulus of rupture (MOR) and internal bonding (IB) showed in lower values, depending on the proportion of wood filler they contained. Discoloration of the WPCs was observed after burial in the soil with spectra alteration of attenuated transmission reflectance (ATR) in the band of 500-1000 cm-1 which could be assigned to detach the interphase between wood and plastics. As termite bait, the WPCs decreased in weight, even though the mass loss was comparatively small. Micro Confocal Raman Imaging Spectrometer revealed that termite guts from insects feeding on WPCs contained small amounts of LDPE. This indicated termite can consume plastics in the form of WPCs. Thus WPCs made predominantly of plastics can be degraded in nature. While producing WPCs can assist in decreasing plastics litter in the environment, the eventual fate of the LDPE in termites is still unknown.

Antimicrobial Imperata cylindrica paper coated with anionic nanocellulose crosslinked with cationic ions.

Recently, the interest in active packaging utilization has increased with population growth, food demand and new consumer trend like food delivery services. This new system, however, requires the use of additives to extend the food product quality and safety as well as in maintaining the shelf-life. This study was to prepare the antimicrobial paper from I. cylindrica coated anionic nanocellulose crosslinked cationic to create a system with the ability to actively control microbe growth in the packaging materials. The process involved pulping of I. cylindrica using semi-chemical and soda chemical method. The antimicrobial paper was prepared by printing the pulp suspension in 60 g/m2 grammage in mold followed by the spray of anionic nanocellulose and subsequent soaking of the paper in cationic solution. The results showed the I. cylindrica paper coated anionic nanocellulose crosslinked with H+ and Al3+ cations were successfully produced. The paper produced was also observed to have antimicrobial activity against Gram-negative of E. coli and S. typhi as well as Gram-positive of S. aureus and B. subtilis bacteria. Furthermore, the best coating method was found on antimicrobial paper coated anionic nanocellulose crosslinked Al3+ as evidenced by smoother and compact surface structure.

Enhancement of Oil Palm Waste Nanoparticles on the Properties and Characterization of Hybrid Plywood Biocomposites.

Using oil palm trunk (OPT) layered with empty fruit bunch (EFB), so-called hybrid plywood enhanced with palm oil ash nanoparticles, with phenol-formaldehyde (PF) resin as a binder, was produced in this study. The phenol-formaldehyde (PF) resins filled with different loading of oil palm ash (OPA) nanoparticles were prepared and used as glue for layers of the oil palm trunk (OPT) veneer and empty fruit bunch fibre mat. The resulting hybrid plywood produced was characterised. The physical, mechanical, thermal, and morphological properties of the hybrid plywood panels were investigated. The results obtained showed that the presence of OPA nanoparticles significantly affected the physical, mechanical, and thermal properties of the plywood panels. Significant improvements in dimension from water absorption and thickness swelling experiments were obtained for the plywood panels with the highest OPA nanoparticles loading in PF resin. The mechanical properties indicated that plywood composites showed improvement in flexural, shear, and impact properties until a certain loading of OPA nanoparticles in PF resin. Fracture surface morphology also showed the effectiveness of OPA nanoparticles in the reduction of layer breakage due to force and stress distribution. The thermal stability performance showed that PF filled OPA nanoparticles contributed to the thermal stability of the plywood panels. Therefore, the results obtained in this study showed that OPA nanoparticles certainly improved the characteristic of the hybrid plywood.

Nanocellulose: From Fundamentals to Advanced Applications.

Over the past few years, nanocellulose (NC), cellulose in the form of nanostructures, has been proved to be one of the most prominent green materials of modern times. NC materials have gained growing interests owing to their attractive and excellent characteristics such as abundance, high aspect ratio, better mechanical properties, renewability, and biocompatibility. The abundant hydroxyl functional groups allow a wide range of functionalizations via chemical reactions, leading to developing various materials with tunable features. In this review, recent advances in the preparation, modification, and emerging application of nanocellulose, especially cellulose nanocrystals (CNCs), are described and discussed based on the analysis of the latest investigations (particularly for the reports of the past 3 years). We start with a concise background of cellulose, its structural organization as well as the nomenclature of cellulose nanomaterials for beginners in this field. Then, different experimental procedures for the production of nanocelluloses, their properties, and functionalization approaches were elaborated. Furthermore, a number of recent and emerging uses of nanocellulose in nanocomposites, Pickering emulsifiers, wood adhesives, wastewater treatment, as well as in new evolving biomedical applications are presented. Finally, the challenges and opportunities of NC-based emerging materials are discussed.

Hydrolysis of particleboard bonded with urea-formaldehyde resin for recycling.

In this study, the removal of urea-formaldehyde (UF) resin adhesives from waste wood particleboards (PBs) via hydrolysis was discussed, particularly the use of this application to combat environmental issues often encountered in recycling projects. Herein, the conditions required for producing PBs with poor binding properties were examined. Additionally, we determined the appropriate formaldehyde: urea (F/U) mole ratios, namely, 0.95, 1.05, and 1.15, required for generating UF resins that can be characterized and used as PB binders. The resulting values were compared with those obtained for a high mole ratio of UF resin (F/U = 2.0) as well as a commercially available PB sample for binding. Aqueous hydrochloric acid (HCl) solutions of various concentrations and water were used to leach the adhesive from the wood residues, and the effectiveness of these leaching agents was determined using a combined scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) technique in addition to the Kjeldahl method. Swelling tests were performed on the UF resins to measure the sol fraction (ωsol) and evaluate the network behavior of the resulting resins. Our results showed that factors, such as solid content, density, viscosity, and gel time, were necessary for generating an effective adhesive; herein, we determined that a solid content between 37.17 and 56.57%, density between 1.45 and 1.54 g/cm3, viscosity ranging from 115-444 MPa.s, and gel time between 8.50 and 13.13 min were feasible. Whereas the physical properties of the resulting PB (i.e., the density and moisture content) fulfilled the criteria established by the Japanese Industrial Standard, as laid out in the document entitled JIS A 5908: Particleboards (2003), the mechanical properties failed to pass the aforementioned standard as low bending strength and weak internal bonding were noted for the PBs produced. The use of hydrolyzing agents successfully decomposed the UF resin adhesives by altering their nitrogen (N) content; confirmation of this was obtained through SEM-EDS analysis along with the Kjeldahl method. Swelling tests showed that despite containing a reasonable amount of nitrogen owing to its dissolution in either HCl or water, the ωsol parameter was heavily influenced by the concentration of the hardener and type of F/U mole ratio adhesive used for the PB under investigation. These results indicate that wood residues can be used as raw materials for recycling PBs.