Personalized total knee arthroplasty in patients with extra-articular deformities.

Over the years, with a better understanding of knee anatomy and biomechanics, superior implant designs, advanced surgical techniques, and the availability of precision tools such as robotics and navigation, a more personalized approach to total knee arthroplasty (TKA) has emerged. In the presence of extra-articular deformities, performing personalized TKA can be more challenging and specific considerations are required, since one has to deal with an acquired pathological anatomy. Performing personalized TKA surgery in patients with extra-articular deformities, the surgeon can: (1) resurface the joint, omitting the extra-articular deformity; (2) partially compensate the extra-articular deformity with intra-articular correction (hybrid technique), or (3) correct the extra-articular deformity combined with a joint resurfacing TKA (single stage or two-stage procedure). Omitting the acquired lower limb malalignment by resurfacing the knee has the advantages of respecting the joint surface anatomy and preserving soft tissue laxities. On the other hand, it maintains pathological joint load and lower limb kinematics with potentially detrimental outcomes. The hybrid technique can be performed in most cases. It circumvents complications associated with osteotomies and brings lower limb axes closer to native alignment. On the other hand, it creates some intra-articular imbalances, which may require soft tissue releases and/or constrained implants. Correcting the extra-articular deformity (through an osteotomy) in conjunction with joint resurfacing TKA represents the only true kinematic alignment technique, as it aims to reproduce native knee laxity and overall lower limb axis.

Excellent Results of Large-Diameter Ceramic-on-Ceramic Bearings in Total Hip Arthroplasty at Minimum Ten-Year Follow-up.

AIMS: This study reports the minimum 10 year results of total hip arthroplasty (THA) performed using a monoblock acetabular component with a large-diameter head (LDH) ceramic-on-ceramic (CoC) bearing. METHODS: Of the 276 THAs included in this study, 237 (85%) were available for review at a mean of 10.5 years (range, 10 to 12) postoperatively. There were eleven deaths that occurred during the follow-up. Reoperations, implant revisions, adverse events, clinical outcomes, radiographic evaluation, and whole blood metal ion levels were assessed at the last follow-up. RESULTS: After a minimum of 10 years, implant survivorship was 98.7%. There were three revisions (1.3%): one for insufficient acetabular cup primary fixation, one traumatic periprosthetic acetabular fracture, and one probable deep chronic infection. No dislocation or ceramic implant fracture was observed. The mean University of California at Los Angeles (UCLA) activity score, Western Ontario and McMaster Universities Osteoarthritis Index score, and Forgotten Joint Score were 5.6 (2 to 10), 90.1 (9 to 100), and 79.2 (4 to 100), respectively. In the 10 years following implantation, at least 43% of patients reported hearing a squeaking noise from the prosthesis. All patients who had squeaking hips were satisfied with the surgery. The mean titanium level was 2.2 µg/L (1.1 to 5.6). No progressive radiolucent lines, osteolysis, or implant loosening signs were observed at the last radiographic evaluation. CONCLUSION: A LDH CoC THA provides outstanding long-term (minimum 10 year) implant survivorship with unrestricted activity while avoiding implant impingement, liner fracture, and hip instability. Functional outcomes, satisfaction, and joint perception were excellent. Although the incidence of squeaking was high, it did not affect patient satisfaction or function. The systemic titanium levels were low, related to unavoidable passive corrosion of implant surfaces, and did not reveal any indirect signs of trunnionosis.

Primary total knee arthroplasty in hemophilic arthropathy.

Advanced hemophilic knee arthropathy is a frequent and devastating manifestation of severe hemophilia with significant implications for activities of daily living. Hemophilic arthropathy is caused by repeated bleeding, resulting in joint degeneration, pain, deformity and disability. In patients with hemophilia and advanced disease, total knee arthroplasty (TKA) has proven to be the most successful intervention, improves physical function and reduces knee pain. Hemophilic patients carry additional risks for complications and required specific pre/postoperative considerations. Expert treatment center should be used to improve patient outcome. Hemophilic patients present significant surgical challenges such as joint destruction, bone loss, severe ankylosis and oligoarticular involvement. The surgeon performing the arthroplasty must be experienced to manage such problems.

Midterm results of titanium conical Wagner stem with challenging femoral anatomy: Survivorship and unique bone remodeling.

BACKGROUND: Complex anatomy of the proximal femur makes total hip arthroplasty (THA) more challenging. Short, straight, fluted and conical titanium stem like the Wagner Cone can be helpful to address small femoral canal, increased femoral neck version, important leg length discrepancy or proximal femoral deformity. The outcome in these patients is less assured and associated with high rate of complications. Therefore, we did a retrospective study aiming to answer: 1) can the Wagner Cone stem provide acceptable mid- to long-term implant survivorship; 2) help minimizing perioperative adverse events; 3) produce favorable clinical outcome measured by WOMAC score; and 4) be associated with a favorable radiographic femoral bone remodeling at the last follow-up? HYPOTHESIS: Wagner Cone stem is an advantageous solution for the distorted proximal femur in complex THA. PATIENTS AND METHOD: Our cohort was derived from the patient registries where medical records of 88 patients (103 hips) who underwent primary THA using the Wagner prosthesis were retrospectively reviewed. Then, data was analyzed for patients' demographics and surgical data, and comparing preoperative, immediate postoperative and last follow-up data. Eleven patients (12 hips) were excluded (7 hips followed up less than 2 years or lost to follow-up, 3 hips that had the Wagner stem for revision and 2 Wagner stems inserted for periprosthetic fracture). This left 77 patients (91 hips) with Wagner cone stems implanted for more than 2 years between March 2003 and February 2017 by 7 surgeons in 3 academic hospitals. Implant revision, reoperations, WOMAC score and radiographic analyses were recorded at last follow-up. RESULTS: After a mean follow-up of 7.8 (range, 2.0-16.2) years, Wagner stem survivorship was 98.9% (95% CI: 94 to 100%) with one (1.1%) stem revision for failure of osteointegration. Five (5.5%) acetabular revisions, one for aseptic loosening, 2 for adverse reaction to metal debris and 2 for infection. One (1.1%) sciatic neuropathy and 4 (4.4%) intraoperative fractures were encountered. The mean WOMAC score was 90.5±11.4 (59-100). Radiographic analysis showed clear signs of stem osseointegration and hypertrophic bone remodeling in 82 cases (92.1%). CONCLUSIONS: Used in complex cases with proximal distorted femurs, the Wagner Cone stem demonstrated a low complication rate, a high-rate consistent adaptive bone remodeling, excellent clinical results, and midterm survival. It is a safe, reliable and advantageous option in complex primary THA. However, the contribution of the underlying cause of the secondary osteoarthritis on the long-term survival of the stem remains to be demonstrated. LEVEL OF EVIDENCE: IV; retrospective study.

Bilateral Pseudoarthrodesis: A Case Report of Complex Bilateral Total Knee Replacement for a Severe Hemophilia A Patient with Inhibitors.

CASE: We present a severe hemophilia A patient with high titers of inhibitors presenting stage IV knee arthropathy with functional bilateral arthrodesis. On presentation, his mode of ambulation was to project himself forward without the benefit of any significant ankle motion. Total knee arthroplasty was performed on both knees and allowed significant improvement in the range of motion of both knees from 5° to 100°. CONCLUSION: Although hemophilic patients with inhibitors can represent complex cases, successful outcomes can be achieved in a multidisciplinary team setting. However, we would recommend performing this type of surgery at an earlier stage when less extensive muscle and tendon release is required.

Liner dissociation in a large-diameter ceramic-bearing acetabular component: a report of five cases.

BACKGROUND: Ceramic-on-ceramic (CoC) bearings for total hip arthroplasty (THA) have been offering very favorable results and survivorship since their introduction. In order to increase range of movement (ROM) and decrease dislocation rates, some manufacturers have introduced larger diameter head (LDH) CoC bearings. This has been achieved with the use of preassembled cup designs, in which the ceramic liner is already fitted into the metal backing and implanted as a monoblock component by the surgeon. In this report we present data from a series of 5 patients with ceramic liner dissociation from a monoblock cup. CASE PRESENTATION: All cases were overweight men with acetabular components of 56 or 58 mm. After a mean of 5.5 (range, 3.5-6.7) years, all patients reported sudden pain and audible noise when performing activities of daily living. Liner displacement was suspected on plain radiographs and confirmed by Ct-scan. Pneumarthrosis was present in all cases. Taper modular junction wear and corrosion signs were observed in the four revised patients. CONCLUSION: Although one of our case is still treated conservatively, implant revision is probably inevitable. Further LDH CoC implant design should take in consideration this potential complication by avoiding bearing diameters over 40mm and/or improving locking mechanism or by providing a real monoblock acetabular implant.

Personalized alignment™ for total knee arthroplasty using the ROSA® Knee and Persona® knee systems: Surgical technique.

Total knee arthroplasty (TKA) procedures are expected to increase up to 565% in the United States over the next 3 decades. TKAs were traditionally performed with neutral mechanical alignments that provided equal medial and lateral gaps in extension and flexion to reduce implant wear but were less successful at restoring native knee function and associated with high patient dissatisfaction. Kinematic alignment (KA) restores native anatomy and minimizes soft tissue release; however, KAs that recreate severe deformities and/or biomechanically inferior alignments result in significant increases in implant stress and risk of aseptic loosening. Restricted kinematic alignment (rKA) recreates pre-arthritic anatomy within a range of acceptable alignment boundaries, and improved patient clinical scores and faster recoveries have been reported with rKA techniques. Personalized Alignment™ is an evolution of rKA that relies heavily upon robotic assistance to reliably recreate patient anatomy, native soft tissue laxity, and accurate component placement to improve patients' clinical outcomes. The purpose of this surgical technique report is to describe the Personalized Alignment TKA method using the ROSA® Knee System and Persona® The Personalized Knee® implants. Herein we provide specific procedures for pre-operative planning, anatomical landmarking and evaluation, intra-operative planning and adjustment of resections and cuts, cut validation and soft tissue evaluation with robotic-assisted personalized TKA.

Using standard X-ray images to create 3D digital bone models and patient-matched guides for aiding implant positioning and sizing in total knee arthroplasty.

X-Atlas™ is a new imaging technology intended to advance the state of the art in patient-specific instrumentation. It uses standard AP and lateral radiographs instead of CT or MRI scans to create 3D bone models, which can be used to perform pre-operative surgical planning and fabricate TKA personalized guides. The aim of this study was to validate X-Atlas™ and evaluate the accuracy of personalized guides created with this imaging technology. Its ability to predict implant size was also determined. The accuracy of the X-Atlas™ imaging technology was evaluated by comparing the landmarks of X-Atlas™ 3D Bone models to MRI-reconstructed bone models. The accuracy of PSI guides created with X-Atlas™ (X-PSI™ guides) was evaluated during a validation study (16 specimen knees) and a clinical study (50 patients; Health Canada #CSU2015-12K). Optical navigation was used to measure positioning accuracy. In addition, the ability of X-Atlas™ to predict implant size was assessed. The accuracy of the X-Atlas™ imaging technology was below 0.87 and 1.28 mm for the femoral and tibial landmarks, respectively. The accuracy of X-PSI™ guides to reproduce the pre-operative planned HKA was within ± 3° in 100% and 86.1% of cases, for the laboratory and clinical study respectively, which was significantly better than historical data for conventional instrumentation. X-Atlas™ was able to predict implant size to ± 1 size in 95.6% and 100%, for the femur and tibia component respectively. The X-Atlas™ imaging technology demonstrated excellent accuracy for reconstructing a 3D bone model. The results show that PSI guides created with X-Atlas™ (X-PSI™ guides) provide greater implant positioning accuracy than conventional instrumentation, without the requirement of advanced imaging. Furthermore, the X-Atlas™ imaging technology could effectively predict implant sizing, potentially reducing the number of instrument trays and improving surgical efficiency.

No radiological and biological sign of trunnionosis with Large Diameter Head Ceramic Bearing Total Hip Arthroplasty after 5 years.

BACKGROUND: Trunnionosis of large diameter (LDH) metal-on-metal total hip arthroplasty (THA) was linked to high systemic chromium (Cr) and cobalt (Co) ion levels and local adverse reactions to metal debris (ARMD). The safety of CoC LDH THA is not yet available at mid-term. Measuring whole blood Ti level of ceramic on ceramic (CoC) LDH THA with a titanium (Ti) stem is an indirect way to assess the performance of its head-neck taper modular junction. Therefore, we wanted to determine: (1) if the whole blood Ti ion levels in patients with LDH CoC THA after a minimum of 5 years of implantation is within the expected values for similar well performing Ti THA, (2) if Ti level scientifically increases over time, which would suggest the presence of a progressive modular head/neck junction wear process, (3) if clinical or radiographical manifestations of implant dysfunction are present? HYPOTHESIS: Ti blood levels of LDH CoC THA will indirectly reflect the expected levels due to passive corrosion of the implants and will be stable over time. PATIENTS AND METHODS: We report the whole blood Ti, Cr, and Co levels at 5years minimum for 57 patients with unilateral primary LDH CoC THA with head sizes ranging from 36 to 48mm using Ti stem and acetabular component. To compare Ti ion levels modification over time, in 25 patients were a previous measurement (1-3years) was available, we compared it to their last follow-up results (>5 years). Mean Ti level in well performing Ti THAs is recognized to be around 2.0 ug/L. Although, there are no universally accepted Ti levels associated with problematic implant, we used safety threshold of 10 ug/L. Clinical and radiological outcomes were recorded at last follow-up. RESULTS: At 79 months mean follow-up, all mean Ti levels were 1.9µg/L (min 1.2, max 4.4) and all subject had values below the safety threshold of 10ug/L. In the subgroup of 25 cases with a previous measurement, there was a decrease in mean Ti levels between 20 months and 78 months follow-up (2.2µg/L (1.6-3.9) versus 2.0µg/L (1.4-2.8), p=0.007). No statistically significant relation was observed between Ti level at last FU and bearing diameter (rho=0.046, p=0.0734) or the presence or absence of a Ti adaptor sleeve (p=0.454): 1.94ug/L (min 1.20, max 2.80) versus 1.90ug/L (min 1.20, max 4.40). At last follow up, no patients presented osteolysis signs on radiographs, clinical signs of ARMD or were reoperated. Most patients had excellent clinical with 98% of them reporting minor (29%) or no functional limitation (69%) and 44% perceive their THA as a natural hip joint. However, 3/57patients (5%) temporarily experienced hip squeaking and 18/57 (31%) reported clicking sound. CONCLUSION: With the tested LDH CoC THA, Ti levels were low and related the uneventful and unavoidable passive corrosion of implant surfaces. Mid-term measurement of Ti in subjects with LDH CoC did not reveal any indirect signs of trunnionosis, which should already be observable by this time. LEVEL OF EVIDENCE: IV, retrospective study.

Perception of a Natural Joint After Total Knee Arthroplasty.

BACKGROUND: Assessing patients' functional outcomes following total knee arthroplasty (TKA) with traditional scoring systems is limited by their ceiling effects. Patient's Joint Perception (PJP) question of the reconstructed joint is also of significant interest. Forgotten Joint Score (FJS) was created as a more discriminating option. The actual score constituting a "forgotten joint" has not yet been defined. The primary objective of this study is to compare the PJP and the FJS in TKA patients to determine the FJS score that corresponds to the patient's perception of a natural joint. METHODS: One hundred TKAs were assessed at a mean of 40.6 months of follow-up using the PJP question, FJS, and Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC). Correlation between the 3 scores and their ceiling effects were analyzed. RESULTS: With PJP question, 39% of the patients perceived a natural joint (FJS: 92.9; 95% confidence interval [CI], 89.4-96.4), 12% an artificial joint with no restriction (FJS: 79.5; 95% CI, 65.7-93.3), 36% an artificial joint with minor restrictions (FJS: 70.0; 95% CI, 63.2-76.9), and 13% had major restrictions (FJS: 47.3; 95% CI. 32.8-61.7). PJP has a high correlation with FJS and WOMAC (Spearman's rho, -0.705 and -0.680, respectively). FJS and WOMAC had a significant ceiling effect with both reaching the best possible score in >15%. CONCLUSION: Patients perceiving their TKA as a natural knee based on PJP have a FJS ≥89. PJP has a good correlation with FJS and may be a shorter, simple, and acceptable alternative.

Enhanced recovery short-stay hip and knee joint replacement program improves patients outcomes while reducing hospital costs.

INTRODUCTION: An attractive option to reduce hospital length of stay (LOS) after hip or knee joint replacement (THA, TKA) is to follow the Enhanced Recovery After Surgery principles (ERAS) to improve patient experience to a level where they will feel confident to leave for home earlier. The objective of this study was to evaluate the implementation of short-stay protocol following the ERAS principles. HYPOTHESIS: We hypothesized that our ERAS THA and TKA short-stay protocol would result in a lower complication rate, shorter hospital LOS and reduced direct health care costs compared to our standard procedure. MATERIAL AND METHODS: We compared the complications rated according to Clavien-Dindo scale, hospital LOS and costs of the episode of care between a prospective cohort of 120 ERAS short-stay THA or TKA and a matched historical control group of 150 THA or TKA. RESULTS: Significantly lower rate of Grade 1 and 2 complications in the ERAS short-stay group compared with the standard group (mean 0.8 vs 3.0, p<0.001). No difference was found between the 2 groups for Grade 3, 4, or 5 complications. The mean hospital LOS for the ERAS short-stay group decreased by 2.8 days for the THAs (0.1 vs 2.9 days, p<0.001) and 3.9 days for the TKAs (1.0 vs 4.9 days, p<0.001). The mean estimated direct health care costs reduction with the ERAS short-stay protocol was 1489 CAD per THA and 4158 CAD per TKA. DISCUSSION: In many short-stay protocols, focus has shifted from ERAS goals of a reduction in complications and improved recuperation to use length of stay as the main factor of success. Implementation of an ERAS short-stay protocol for patients undergoing THA or TKA at our institution resulted not only in reduced hospital LOS, but also in improved patient care and reduced direct health care costs. LEVEL OF EVIDENCE: Level II.

Modular junction may be more problematic than bearing wear in metal-on-metal total hip arthroplasty.

INTRODUCTION: In total hip arthroplasty (THA), local adverse reaction to metal debris (ARMD) may be caused by abnormal metal ion release from a metal-on-metal (MoM) bearing, or by wear and corrosion of the implant's modular junction. The aim of this study was to compare ion levels and rate of ARMD between patients sharing the same MoM bearing but 1 group having monoblock stems versus another having modular stems. MATERIALS AND METHODS: Whole blood cobalt (Co) and chromium (Cr) ion concentrations, ARMD rate, revision rate, and function measured by UCLA and WOMAC scores were compared between groups. RESULTS: ARMD rate was significantly higher in the modular group (46%) compared with the monoblock group (16%, p = 0.031). Revision for ARMD was performed at 52.8 ± 8.1 months in the modular group versus 98.2 ± 15.5 months after primary THA in the monoblock group. ARMD originated from wear and corrosion of the junction between stem and femoral head adapter sleeve in all monoblock cases, and the junction between stem and modular neck in all the modular ones. Cr and Co ions levels were significantly higher in the modular stem group ( p < 0.001 for both). CONCLUSIONS: Although both groups had MoM bearings, corrosion at stem/neck or neck/head junctions combining dissimilar metal (Ti and Cr-Co) was seen as the source of excess metal ions release leading to ARMD. Poor performance of the modular junction may be more deleterious than wear of the bearing. To avoid such complications, THA femoral stem modular junctions should be eliminated (return to a full monoblock implant) or have improved junction design.

Effectiveness of fosfomycin tromethamine prophylaxis in preventing infection following transrectal ultrasound-guided prostate needle biopsy: Results from a large Canadian cohort.

OBJECTIVES: Rates of infection following transrectal ultrasound-guided prostate biopsy (TRUSPB) are increasing. The aim of this study was to evaluate the effectiveness of fosfomycin tromethamine (FMT) prophylaxis in preventing post-TRUSPB infectious complications. METHODS: This nested case-control study included patients undergoing TRUSPB in a Canadian tertiary-care hospital who developed post-TRUSPB bacteraemia or urinary tract infection. Four prophylaxis periods were defined: (i) ciprofloxacin, low-resistance period (CIPRO-LOW), 2002-2009; (ii) ciprofloxacin, high-resistance period (CIPRO-HIGH), 2010-October 2013; (iii) oral FMT, one dose (FOSFO1), December 2013-September 2015; and (iv) oral FMT, two doses (FOSFO2), November 2015-June 2016. Incidence rates of the infection were calculated. RESULTS: TRUSPB (n=9391) resulted in 138 cases of urinary sepsis (58% with bacteraemia). The incidence rates were 1.8% (CIPRO-HIGH), 3.5% (FOSFO1; P=0.004 vs. CIPRO-HIGH) and 2.7% (FOSFO2; P=0.19 vs. CIPRO-HIGH). Although Escherichia coli remained the predominant pathogen with fosfomycin-based regimens, the proportion of infections caused by Klebsiella spp. was higher (20/66; 30.3%) than with ciprofloxacin-based regimens (2/77; 2.6%; P<0.0001). CONCLUSION: Independent risk factors for infection were the prophylactic regimen administered, presence of urological co-morbidities and diabetes. FMT was therefore not an effective alternative to ciprofloxacin for preventing post-TRUSPB urinary sepsis. These results highlight the need for novel antibacterial prophylaxis approaches.

Implementation of a Mobile Clinical Decision Support Application to Augment Local Antimicrobial Stewardship.

BACKGROUND: Medical applications for mobile devices allow clinicians to leverage microbiological data and standardized guidelines to treat patients with infectious diseases. We report the implementation of a mobile clinical decision support (CDS) application to augment local antimicrobial stewardship. METHODS: We detail the implementation of our mobile CDS application over 20 months. Application utilization data were collected and evaluated using descriptive statistics to quantify the impact of our implementation. RESULTS: Project initiation focused on engaging key stakeholders, developing a business case, and selecting a mobile platform. The preimplementation phase included content development, creation of a pathway for content approval within the hospital committee structure, engaging clinical leaders, and formatting the first version of the guide. Implementation involved a media campaign, staff education, and integration within the electronic medical record and hospital mobile devices. The postimplementation phase required ongoing quality improvement, revision of outdated content, and repeated staff education. The evaluation phase included a guide utilization analysis, reporting to hospital leadership, and sustainability and innovation planning. The mobile application was downloaded 3056 times and accessed 9259 times during the study period. The companion web viewer was accessed 8214 times. CONCLUSIONS: Successful implementation of a customizable mobile CDS tool enabled our team to expand beyond microbiological data to clinical diagnosis, treatment, and antimicrobial stewardship, broadening our influence on antimicrobial prescribing and incorporating utilization data to inspire new quality and safety initiatives. Further studies are needed to assess the impact on antimicrobial utilization, infection control measures, and patient care outcomes.

Comparing and optimizing ultraviolet germicidal irradiation systems use for patient room terminal disinfection: an exploratory study using radiometry and commercial test cards.

Background: Ultraviolet germicidal irradiation (UVGI) systems are gaining popularity, however objective comparisons of their characteristics are lacking. While environmental cultures and reduction of hospital-associated infections rates are excellent study endpoints, they are impractical for centers with limited resources who want to compare or optimize UVGI systems use. Methods: We evaluated radiometry and commercial test cards, two simple and low cost tools, to compare 2 full size UVGI systems (Tru-D and Optimum-UV Enlight) and 2 small units (Lumalier EDU 435 and MRSA-UV Turbo-UV). Results: Radiometry-derived output curves show that if both large devices emit enough energy to reach C. difficile lethal doses at 10 ft, the reduction in output in distance is almost perfectly logarithmic. In a patient room environment, Enlight and Tru-D performed similarly when compared using radiometry and commercial test cards. The two small devices reached C. difficile range around the bathroom with the device raised above the floor, but longer times are needed. Conclusions: Despite different workflows and price points, no clear superiority emerges between Tru-D and Enlight. Bathroom disinfection should be dealt with separately from the main room and small, cheaper units can be used. Radiometry and commercial test cards are promising ways to compare UVGI systems, but further validation is needed using correlation with environmental cultures. Trial registration: Not applicable.

Infection prevention strategies for procedures performed outside operating rooms: A conceptual integrated model.

No comprehensive guidelines or classification exist for infection prevention strategies for medical procedures performed outside operating rooms. We reviewed the available literature and used our clinical experience to develop a progressive, 5-tiered classification of procedures, encompassing clean, aseptic, sterile-superficial, sterile-invasive, and surgical-like procedures to address this need. We provide a description of these categories, along with relevant examples. We fully acknowledge the limitations of our work, which is intended as a starting point for future efforts and not to be definitive.

Effect of sleeved ceramic femoral heads on titanium ion release.

INTRODUCTION: Metal ion release from wear and corrosion at the femoral head-stem taper junction can evoke local adverse reactions to metal debris (ARMD). In a specific large-diameter head (LDH) total hip arthroplasty (THA) system, ceramic femoral heads of 44 to 48 mm are available with a titanium (Ti) adaptor sleeve, while heads of 36- to 40-mm come without sleeves. The hypothesis of this study is that the Ti adaptor sleeve with LDH ceramic-on-ceramic (CoC) bearings will not cause wear or corrosion at the taper junction and, thus, will not generate high whole blood Ti ion levels. METHODS: We compared whole blood Ti levels at minimum 1-year follow-up in 27 patients with unilateral primary LDH CoC THA with head sizes ranging from 36 to 48 mm using a Ti stem and acetabular component. RESULTS: Although Ti ion levels in patients with 36- to 40-mm head diameters without Ti sleeve were found to be statistically significantly higher (2.3 µg/l: 1.6-3.1, SD 0.44) compared to those with a Ti sleeve (1.9 µg/l: 1.6-2.2, SD 0.19) (p = 0.020), the found difference has no clinical importance. No patients presented clinical signs of ARMD, and the clinical results in both groups were similar. CONCLUSIONS: LDH CoC THA Ti levels were low and probably related to unavoidable passive corrosion of implant surfaces. Measurement of Ti in subjects with ceramic LDH, with or without Ti adaptor sleeve, did not disclose undirected signs of trunnionosis.

The Impact of Mechanical and Restricted Kinematic Alignment on Knee Anatomy in Total Knee Arthroplasty.

BACKGROUND: Total knee arthroplasty (TKA), aiming at neutral mechanical alignment (MA), inevitably modifies the patient's native knee anatomy. Another option is kinematic alignment (KA), which aims to restore the original anatomy of the knee. The aim of this study was to evaluate the variations in lower limb anatomy of a patient population scheduled for TKA, and to assess the use of a restricted KA TKA protocol and compare the resulting anatomic modifications with the standard MA technique. METHODS: A total of 4884 knee computed tomography scans were analyzed from a database of patients undergoing TKA with patient-specific instrumentation. The lateral distal femoral angle (LDFA), medial proximal tibial angle (MPTA), and hip-knee-ankle angle (HKA) were measured. Bone resections were compared using a standard MA and a restricted KA aiming for independent tibial and femoral cuts of maximum ±5° deviation from the coronal mechanical axis and a resulting overall coronal HKA within ±3° of neutral. RESULTS: The mean preoperative MPTA was 2.9° varus, LDFA was 2.7° valgus, and overall HKA was 0.1° varus. Using our protocol, 2475 knees (51%) could have undergone KA without adjustment. To include 4062 cases (83%), mean corrections of 0.5° for MPTA and 0.3° for LDFA were needed, significantly less than with MA (3.3° for MPTA and 3.2° for LDFA; P < .001). CONCLUSION: The range of knee anatomy in patients scheduled for TKA is wide. MA leads to greater modifications of knee joint anatomy. To avoid reproducing extreme anatomy, the proposed restricted KA protocol provides an interesting hybrid option between MA and true KA.

Effect of Femoral Stem Modular Neck's Material on Metal Ion Release.

BACKGROUND: In recent decades, the popularity of modular necks in total hip arthroplasty (THA) has increased since modular necks offer the potential to restore the patient's native anatomy, and thus improve stability. Unfortunately, modular necks are associated with higher complication rates, including implant fracture and modular junction corrosion with adverse local tissue reaction to metal debris. OBJECTIVE: The objective of this study was to determine the impact of modular neck material on titanium (Ti), chrome (Cr), and cobalt (Co) metal ion levels in patients who underwent a THA with Ti femoral stem, Ti or CrCo modular neck, and ceramic-on-ceramic (CoC) bearing. METHODS: Whole blood Ti, Cr, and Co levels were compared at a minimum 1-year follow-up in 36 patients who underwent unilateral, primary CoC large-diameter head THA with Profemur® Preserve modular femoral stems (MicroPort, Arlington, TX, USA). RESULTS: Higher Co concentrations were observed in the CrCo modular neck group (0.46 versus 0.26 µg/l in the Ti neck group, P=0.004) and higher Ti concentrations were observed in the Ti modular neck group (1.98 vs 1.59 µg/l in the CrCo neck group, P=0.007). However, these differences were not clinically meaningful since the absolute values remained within what is considered the safe range of Ti, Cr, and Co ions in whole blood. No patients were re-operated or revised. CONCLUSION: Modular neck materials had an impact on whole blood metal ion levels but the concentrations measured remained within the safe range at 1-year follow-up. There were no indirect signs of modular junction corrosion with either CrCo or Ti femoral necks.