Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 33
Filter
Add more filters










Publication year range
1.
ACS Sens ; 9(6): 3009-3016, 2024 Jun 28.
Article in English | MEDLINE | ID: mdl-38836608

ABSTRACT

Immune checkpoint inhibitors (ICIs) targeting programmed cell death ligand 1 (PD-L1), or its receptor, PD-1 have improved survival in patients with non-small-cell lung cancer (NSCLC). Assessment of PD-L1 expression requires tissue biopsy or fine needle aspiration that are currently used to identify patients most likely to respond to single agent anti-PD-1/PD-L1 therapy. However, obtaining sufficient tissue to generate a PD-L1 tissue proportion score (TPS) ≥ 50% using immunohistochemistry remains a challenge that potentially may be overcome by liquid biopsies. This study utilized a mesoporous gold sensor (MGS) assay to examine the phosphorylation status of PD-L1 in plasma extracellular vesicles (EV pPD-L1) and PD-L1 levels in plasma from NSCLC patient samples and their association with tumor PD-L1 TPS. The 3-dimensional mesoporous network of the electrodes provides a large surface area, high signal-to-noise ratio, and a superior electro-conductive framework, thereby significantly improving the detection sensitivity of PD-L1 nanosensing. Test (n = 20) (Pearson's r = 0.99) and validation (n = 45) (Pearson's r = 0.99) cohorts show that EV pPD-L1 status correlates linearly with the tumor PD-L1 TPS assessed by immunohistochemistry irrespective of the tumor stage, with 64% of patients overall showing detectable EV pPD-L1 levels in plasma. In contrast to the EV pPD-L1 results, plasma PD-L1 levels did not correlate with the tumor PD-L1 TPS score or EV pPD-L1 levels. These data demonstrate that EV pPD-L1 levels may be used to select patients for appropriate PD-1 and PD-L1 ICI therapy regimens in early, locally advanced, and advanced NSCLC and should be tested further in randomized controlled trials. Most importantly, the assay used has a less than 24h turnaround time, facilitating adoption of the test into the routine diagnostic evaluation of patients prior to therapy.


Subject(s)
B7-H1 Antigen , Carcinoma, Non-Small-Cell Lung , Extracellular Vesicles , Gold , Lung Neoplasms , Humans , B7-H1 Antigen/metabolism , B7-H1 Antigen/blood , Extracellular Vesicles/chemistry , Extracellular Vesicles/metabolism , Gold/chemistry , Lung Neoplasms/metabolism , Carcinoma, Non-Small-Cell Lung/metabolism , Carcinoma, Non-Small-Cell Lung/drug therapy , Phosphorylation , Porosity , Biosensing Techniques/methods , Middle Aged , Male , Female
2.
Chem Sci ; 15(24): 9147-9154, 2024 Jun 19.
Article in English | MEDLINE | ID: mdl-38903239

ABSTRACT

Lattice strain effects on the piezoelectric properties of crystalline ferroelectrics have been extensively studied for decades; however, the strain dependence of the piezoelectric properties at nano-level has yet to be investigated. Herein, a new overview of the super-strain of nanoporous polycrystalline ferroelectrics is reported for the first time using a nanoengineered barium calcium zirconium titanate composition (Ba0.85Ca0.15)(Ti0.9Zr0.1)O3 (BCZT). Atomic-level investigations show that the controlled pore wall thickness contributes to highly strained lattice structures that also retain the crystal size at the optimal value (<30 nm), which is the primary contributor to high piezoelectricity. The strain field derived from geometric phase analysis at the atomic level and aberration-corrected high-resolution scanning transmission electron microscopy (STEM) yields of over 30% clearly show theoretical agreement with high piezoelectric properties. The uniqueness of this work is the simplicity of the synthesis; moreover the piezoresponse d 33 becomes giant, at around 7500 pm V-1. This response is an order of magnitude greater than that of lead zirconate titanate (PZT), which is known to be the most successful ferroelectric over the past 50 years. This concept utilizing nanoporous BCZT will be highly useful for a promising high-density electrolyte-free dielectric capacitor and generator for energy harvesting in the future.

3.
Small ; : e2311645, 2024 Apr 24.
Article in English | MEDLINE | ID: mdl-38659182

ABSTRACT

Understanding the growth of mesoporous crystalline materials, such as mesoporous metals, on different substrates can provide valuable insights into the crystal growth dynamics and the redox reactions that influence their electrochemical sensing performance. Herein, it is demonstrated how the amorphous nature of the glass substrate can suppress the typical <111> oriented growth in mesoporous Au (mAu) films. The suppressed <111> growth is manifested as an accumulation of strain, leading to the generation of abundant surface defects, which are beneficial for enhancing the electrochemical activity. The fine structuring attained enables dramatically accelerated diffusion and enhances the electrochemical sensing performance for disease-specific biomolecules. As a proof-of-concept, the as-fabricated glass-grown mAu film demonstrates high sensitivity in electrochemical detection of SARS-CoV-2-specific RNA with a limit of detection (LoD) as low as 1 attomolar (aM).

4.
Biosens Bioelectron ; 249: 115984, 2024 Apr 01.
Article in English | MEDLINE | ID: mdl-38219464

ABSTRACT

Immune checkpoint proteins (ICPs) play a major role in a patient's immune response against cancer. Tumour cells usually express those proteins to communicate with immune cells as a process of escaping the anti-cancer immune response. Detecting the major functional immune checkpoint proteins present on cancer cells (such as circulating tumor cells or CTCs) and examining the heterogeneity in their expression at the single-cell level could play a crucial role in both cancer diagnosis and the monitoring of therapy. In this study, we develop a mesoporous gold biosensor to precisely assess ICP heterogeneity in individual cancer cells within a lung cancer model. The platform utilizes a nanostructured mesoporous gold surface to capture CTCs and a Surface Enhanced Raman Scattering (SERS) readout to identify and monitor the expression of key ICP proteins (PD-L1, B7H4, CD276, CD80) in lung cancer cells. The homogeneous and abundant pores in mesoporous 3D gold nanostructures enable increased antibody loading on-chip and an enhanced SERS signal, which are key to our single cell capture, and accurate analysis of ICPs in cancer cells with high sensitivity. Our lung cancer cell line model data showed that our method can detect single cells and analyse the expression of four lung cancer associated ICPs on individual cell surfaces during treatment. To show the potential of our mesoporous gold biosensor in analysing clinical samples, we tested 9 longitudinal Peripheral Blood Mononuclear Cells (PBMC) samples from lung cancer patient before and after therapy. Our mesoporous biosensor successfully captured single CTCs and found that the expression of ICPs in CTCs is highly heterogeneous in both pre-treatment and treated PBMC samples isolated from lung cancer patient blood. We suggest that our findings will help clinicians in selecting the most appropriate therapy for patients.


Subject(s)
Biosensing Techniques , Lung Neoplasms , Neoplastic Cells, Circulating , Humans , Immune Checkpoint Proteins , Leukocytes, Mononuclear , Gold , Neoplastic Cells, Circulating/pathology , B7 Antigens
5.
J Am Chem Soc ; 145(43): 23461-23469, 2023 Nov 01.
Article in English | MEDLINE | ID: mdl-37851534

ABSTRACT

Binary metastable semiconductor materials offer exciting possibilities in the field of optoelectronics, such as photovoltaics, tunable photosensors, and detectors. However, understanding their properties and translating them into practical applications can sometimes be challenging, owing to their thermodynamic instability. Herein, we report a temperature-controlled crystallization technique involving electrochemical deposition to produce metastable CuTe2 thin films that can reliably function under ambient conditions. A series of in situ heating/cooling cycle tests from room temperature to 200 °C followed by spectral, morphological, and compound analyses (such as ultraviolet-visible light spectroscopy, X-ray diffraction (XRD) analysis, and X-ray photoelectron spectroscopy (XPS)) suggest that the seeding electrodes play a key role in the realization of the metastable phase in CuTe2 films. In particular, CuTe2 films deposited on Al electrodes exhibit superior crystallinity and long-term stability compared with those grown on a Au substrate. The XRD data of thermally annealed CuTe2 thin films deposited on Al show a markedly sharp peak, indicating significantly increased crystal-domain sizes. Our method can be used to achieve the metastable phase of CuTe2 with a bandgap of 1.67 eV and offers outstanding photoresponsivity under different illumination conditions.

6.
ACS Nano ; 17(4): 3346-3357, 2023 02 28.
Article in English | MEDLINE | ID: mdl-36744876

ABSTRACT

Construction of a well-defined mesoporous nanostructure is crucial for applying nonnoble metals in catalysis and biomedicine owing to their highly exposed active sites and accessible surfaces. However, it remains a great challenge to controllably synthesize superparamagnetic CoFe-based mesoporous nanospheres with tunable compositions and exposed large pores, which are sought for immobilization or adsorption of guest molecules for magnetic capture, isolation, preconcentration, and purification. Herein, a facile assembly strategy of a block copolymer was developed to fabricate a mesoporous CoFeB amorphous alloy with abundant metallic Co/Fe atoms, which served as an ideal scaffold for well-dispersed loading of Au nanoparticles (∼3.1 nm) via the galvanic replacement reaction. The prepared Au-CoFeB possessed high saturation magnetization as well as uniform and large open mesopores (∼12.5 nm), which provided ample accessibility to biomolecules, such as nucleic acids, enzymes, proteins, and antibodies. Through this distinctive combination of superparamagnetism (CoFeB) and biofavorability (Au), the resulting Au-CoFeB was employed as a dispersible nanovehicle for the direct capture and isolation of p53 autoantibody from serum samples. Highly sensitive detection of the autoantibody was achieved with a limit of detection of 0.006 U/mL, which was 50 times lower than that of the conventional p53-ELISA kit-based detection system. Our assay is capable of quantifying differential expression patterns for detecting p53 autoantibodies in ovarian cancer patients. This assay provides a rapid, inexpensive, and portable platform with the potential to detect a wide range of clinically relevant protein biomarkers.


Subject(s)
Metal Nanoparticles , Female , Humans , Metal Nanoparticles/chemistry , Autoantibodies , Gold/chemistry , Tumor Suppressor Protein p53 , Magnetic Iron Oxide Nanoparticles
7.
Small ; 19(9): e2204946, 2023 03.
Article in English | MEDLINE | ID: mdl-36538749

ABSTRACT

Flexible and implantable electronics hold tremendous promises for advanced healthcare applications, especially for physiological neural recording and modulations. Key requirements in neural interfaces include miniature dimensions for spatial physiological mapping and low impedance for recognizing small biopotential signals. Herein, a bottom-up mesoporous formation technique and a top-down microlithography process are integrated to create flexible and low-impedance mesoporous gold (Au) electrodes for biosensing and bioimplant applications. The mesoporous architectures developed on a thin and soft polymeric substrate provide excellent mechanical flexibility and stable electrical characteristics capable of sustaining multiple bending cycles. The large surface areas formed within the mesoporous network allow for high current density transfer in standard electrolytes, highly suitable for biological sensing applications as demonstrated in glucose sensors with an excellent detection limit of 1.95 µm and high sensitivity of 6.1 mA cm-2  µM-1 , which is approximately six times higher than that of benchmarking flat/non-porous films. The low impedance of less than 1 kΩ at 1 kHz in the as-synthesized mesoporous electrodes, along with their mechanical flexibility and durability, offer peripheral nerve recording functionalities that are successfully demonstrated in vivo. These features highlight the new possibilities of our novel flexible nanoarchitectonics for neuronal recording and modulation applications.


Subject(s)
Biosensing Techniques , Electronics , Electrodes , Monitoring, Physiologic , Porosity
8.
Small ; 18(26): e2107571, 2022 07.
Article in English | MEDLINE | ID: mdl-35620959

ABSTRACT

The integration of nanoarchitectonics and hydrogel into conventional biosensing platforms offers the opportunities to design physically and chemically controlled and optimized soft structures with superior biocompatibility, better immobilization of biomolecules, and specific and sensitive biosensor design. The physical and chemical properties of 3D hydrogel structures can be modified by integrating with nanostructures. Such modifications can enhance their responsiveness to mechanical, optical, thermal, magnetic, and electric stimuli, which in turn can enhance the practicality of biosensors in clinical settings. This review describes the synthesis and kinetics of gel networks and exploitation of nanostructure-integrated hydrogels in biosensing. With an emphasis on different integration strategies of hydrogel with nanostructures, this review highlights the importance of hydrogel nanostructures as one of the most favorable candidates for developing ultrasensitive biosensors. Moreover, hydrogel nanoarchitectonics are also portrayed as a promising candidate for fabricating next-generation robust biosensors.


Subject(s)
Biosensing Techniques , Nanostructures , Hydrogels/chemistry , Nanostructures/chemistry
9.
MethodsX ; 8: 101312, 2021.
Article in English | MEDLINE | ID: mdl-34434832

ABSTRACT

Iron nanoparticles are used as a targeted drug delivery system. The nanocarrier itself can be genotoxic, trigger oxidative stress or cell death. Therefore, we developed an AC/DC magnetic syringe for injecting, stimulating drug release and safe removing of the nanocarrier. Alongside we optimized the method for nanoparticles' drug release kinetics and testing cytotoxicity in vitro.•This paper presents detailed instructions for construction of AC/DC magnetic syringe device for stimulated drug release, injection and ejection of magnetic nanoparticles; nanoparticles preparation; adsorbing methylene blue on nanoparticles; determination of drug release kinetics from nanocarriers on the example of methylene blue•Gomori´s Prussian blue reaction for differentiated SH-SY5Y human neuroblastoma cell line; MTT viability assay optimized for differentiated SH-SY5Y human neuroblastoma cell line and antioxidant enzymes activities assay and lipid peroxidation methods are optimized for cell analyses cell cultivation for nanoparticles cytotoxicity testing in vitro.•Those protocols are the first step toward further testing the effect of nanoparticles in vivo, on brain tissue.

10.
Small ; 17(42): e2102220, 2021 10.
Article in English | MEDLINE | ID: mdl-34216426

ABSTRACT

Extracellular vesicles (EVs) can transfer intercellular messages in various (patho)physiological processes and transport biomolecules to recipient cells. EVs possess the capacity to evade the immune system and remain stable over long periods, identifying them as natural carriers for drugs and biologics. However, the challenges associated with EVs isolation, heterogeneity, coexistence with homologous biomolecules, and lack of site-specific delivery, have impeded their potential. In recent years, the amalgamation of EVs with rationally engineered nanostructures has been proposed for achieving effective drug loading and site-specific delivery. With the advancement of nanotechnology and nanoarchitectonics, different nanostructures with tunable size, shapes, and surface properties can be integrated with EVs for drug loading, target binding, efficient delivery, and therapeutics. Such integration may enable improved cellular targeting and the protection of encapsulated drugs for enhanced and specific delivery to target cells. This review summarizes the recent development of nanostructure amalgamated EVs for drug delivery, therapeutics, and real-time monitoring of disease progression. With a specific focus on the exosomal cargo, diverse drug delivery system, and biomimetic nanostructures based on EVs for selective drug delivery, this review also chronicles the needs and challenges of EV-based biomimetic nanostructures and provides a future outlook on the strategies posed.


Subject(s)
Biological Products , Extracellular Vesicles , Pharmaceutical Preparations , Drug Delivery Systems
11.
J Hazard Mater ; 409: 124918, 2021 05 05.
Article in English | MEDLINE | ID: mdl-33422751

ABSTRACT

Continuing our previous research work on a drug delivery system based on combined AC/DC magnetic fields, we have developed a prototype AC/DC magnetic syringe device for stimulation of drug release from drug carriers, with the options of injecting/removing drug carriers. The porous Fe3O4 carrier, in a dose-dependent manner, causes acute oxidative damage and reduces the viability of differentiated SH-SY5Y human neuroblastoma cells, indicating the necessity for its removal once it reaches the therapeutic concentration at the target tissue. The working mechanism of the device consists of three simple steps. First, direct injection of the drug adsorbed on the surface of a carrier via a needle inserted into the targeted area. The second step is stimulation of drug release using a combination of AC magnetic field (a coil magnetised needle with AC current) and permanent magnets (DC magnetic lens outside of the body), and the third step is removal of the drug carriers from the injected area after the completion of drug release by magnetising the tip of the needle with DC current. Removing the drug carriers allows us to avoid possible acute and long term side effects of the drug carriers in the patient's body, as well as any potential response of the body to the drug carriers.


Subject(s)
Drug Carriers , Magnets , Drug Liberation , Humans , Magnetic Fields , Magnetics
12.
J Hazard Mater ; 408: 124843, 2021 04 15.
Article in English | MEDLINE | ID: mdl-33421849

ABSTRACT

We report the nanoconfinement-mediated graphitic nanoporous carbon nitride (gNPCN) adsorbents with a high content of inbuilt basic nitrogen (N) (48%) by X-ray photoelectron spectroscopy (XPS) for efficient CO2 adsorption. The gNPCNs (gNPCN-150 and gNPCN-130) are synthesized using the mesoporous SBA-15 silica template and a single carbon-nitrogen (C-N) precursor (guanidine hydrochloride). The various adsorbents were utilized for investigating the influence of pore size (PS), surface area (SA), and type of adsorbent for CO2 adsorption performance. The capacity for CO2 capturing of gNPCN-150 reached 23.1 mmol/g at 0 °C under 30 bar pressure. This CO2 capturing capacity value was higher than the capacity gNPCN-130, SBA15, activated carbon (AC), and multiwalled carbon nanotube (MWCN) under identical conditions. The gNPCN materials exhibited superior CO2 adsorption ability that is ascribed to the presence of the highly organized mesoporosity, inbuilt high content of basic N site for adsorbing more CO2 through acid-base interaction, and tunable surface-structural properties. Moreover, the synthesis strategy is remarkably flexible in selecting C-N sources. This study features graphitic high-ordered nanoporous CN materials as a resourceful platform towards the efficient CO2 capture.

13.
Adv Sci (Weinh) ; 7(21): 2001294, 2020 Nov.
Article in English | MEDLINE | ID: mdl-33173726

ABSTRACT

Semiconductor nanowires are widely considered as the building blocks that revolutionized many areas of nanosciences and nanotechnologies. The unique features in nanowires, including high electron transport, excellent mechanical robustness, large surface area, and capability to engineer their intrinsic properties, enable new classes of nanoelectromechanical systems (NEMS). Wide bandgap (WBG) semiconductors in the form of nanowires are a hot spot of research owing to the tremendous possibilities in NEMS, particularly for environmental monitoring and energy harvesting. This article presents a comprehensive overview of the recent progress on the growth, properties and applications of silicon carbide (SiC), group III-nitrides, and diamond nanowires as the materials of choice for NEMS. It begins with a snapshot on material developments and fabrication technologies, covering both bottom-up and top-down approaches. A discussion on the mechanical, electrical, optical, and thermal properties is provided detailing the fundamental physics of WBG nanowires along with their potential for NEMS. A series of sensing and electronic devices particularly for environmental monitoring is reviewed, which further extend the capability in industrial applications. The article concludes with the merits and shortcomings of environmental monitoring applications based on these classes of nanowires, providing a roadmap for future development in this fast-emerging research field.

14.
Biosens Bioelectron ; 168: 112429, 2020 Nov 15.
Article in English | MEDLINE | ID: mdl-32942183

ABSTRACT

Advances in nanoarchitectonics enable a wide variety of nanostructured electrodes with tunable shapes and surface for constructing sensitive biosensors. Herein we demonstrate the fabrication of a mesoporous gold (Au) biosensor for the specific and sensitive detection of miRNA in a relatively simple and portable manner. The electrocatalytic activity of the mesoporous Au electrode (MPGE) towards the redox reaction of Fe(CN)6]3-/4- expansively examined. Leveraging the electrocatalytic activity and signal enhancement capacity of the MPGE, an ultrasensitive and specific electrochemical sensor was developed for the detection of microRNA (miRNA). The target miRNA from spiked samples is selectively isolated and purified using magnetic bead-capture probe followed by the direct adsorption on the MPGE through direct affinity interaction between miRNA and mesoporous Au surface. The MPGE-bound miRNA is then quantified by differential pulse voltammetry (DPV) using [Fe(CN)6]4-/3- redox system (Faradaic current decrease with reference to the bare MPGE). This method evades the cumbersome PCR (polymerase chain reaction) and enzymatic amplification steps. This is a single-step assay building which can detect a wide dynamic linear range (100 aM to 1 nM) of miRNA with an ultra-low limit detection of 100 aM and present high translational potentiality for the development of high-performance detection tools for clinics.


Subject(s)
Biosensing Techniques , MicroRNAs , Nanostructures , Electrochemical Techniques , Electrodes , Gold , Limit of Detection
15.
J Mater Chem B ; 8(41): 9512-9523, 2020 10 28.
Article in English | MEDLINE | ID: mdl-32996976

ABSTRACT

Herein, we report the preparation of mesoporous gold (Au)-silver (Ag) alloy films through the electrochemical micelle assembly process and their applications as microRNA (miRNA) sensors. Following electrochemical deposition and subsequent removal of the templates, the polymeric micelles can create uniformly sized mesoporous architectures with high surface areas. The resulting mesoporous Au-Ag alloy films show high current densities (electrocatalytic activities) towards the redox reaction between potassium ferrocyanide and potassium ferricyanide. Following magnetic isolation and purification, the target miRNA is adsorbed directly on the mesoporous Au-Ag film. Electrochemical detection is then enabled by differential pulse voltammetry (DPV) using the [Fe(CN)6]3-/4- redox system (the faradaic current for the miRNA-adsorbed Au-Ag film decreases compared to the bare film). The films demonstrate great advantages towards miRNA sensing platforms to enhance the detection limit down to attomolar levels of miR-21 (limit of detection (LOD) = 100 aM, s/n = 3). The developed enzymatic amplification-free miniaturized analytical sensor has promising potential for RNA-based diagnosis of diseases.


Subject(s)
Gold Alloys/chemistry , MicroRNAs/analysis , Silver/chemistry , Electrochemical Techniques/instrumentation , Electrochemical Techniques/methods , Equipment Design , Ferrocyanides/chemistry , Humans , Micelles , Oxidation-Reduction , Porosity
16.
Analyst ; 145(20): 6639-6648, 2020 Oct 12.
Article in English | MEDLINE | ID: mdl-32797121

ABSTRACT

Protein phosphorylation is a post-translational modification of kinase proteins that changes a protein's conformation to regulate crucial biological functions. However, the phosphorylation of protein is significantly altered during cancer progression which triggers abnormal cellular pathways and this phosphorylation can serve as an emergent diagnostic and prognostic biomarker for cancer. Herein, we develop a nanostructured mesoporous gold electrode (NMGE)-based biosensor that enables a highly sensitive detection of protein phosphorylation with electrochemical signal amplification. The biosensor comprises nanostructured mesoporous gold electrodes whose electro-conductive framework is superior to that of the nonporous electrodes. We characterize our developed nano/mesoporous gold electrode with various electrochemical methods in the presence of the [Fe(CN)6]3-/4- redox system. We find that the mesoporous gold electrode catalyzes both the oxidation and reduction processes of the [Fe(CN)6]3-/4- system and generates a current signal that is 3 times higher than that of the nonporous gold electrode. This superior signal transduction of our nano/mesoporous gold electrode is enabled through a pore-induced (i) high electrochemically active surface area and (ii) reduced impedance with a high signal to noise ratio. The assay utilizes direct adsorption of an immunoprecipitated purified BRAF protein towards the mesoporous gold electrode and thus avoids the cumbersome sensor surface functionalization. Our developed biosensor detects the phosphorylated BRAF protein with a 2.5-fold increase in sensitivity and an ≈10-fold increase in the limit of detection (LOD) in comparison with the nonporous gold electrodes. The assay also works on a wide dynamic range from 0.5 to 20 ng µL-1 of the protein which further shows its potential for clinical application. We envisage that this nanostructured mesoporous gold biosensor will be of high interest for clinical application.


Subject(s)
Biosensing Techniques , Neoplasms , Electrochemical Techniques , Electrodes , Gold , Humans , Limit of Detection , Phosphorylation
17.
Small ; 16(12): e1902934, 2020 03.
Article in English | MEDLINE | ID: mdl-31603273

ABSTRACT

Mesoporous noble metals and their patterning techniques for obtaining unique patterned structures are highly attractive for electrocatalysis, photocatalysis, and optoelectronics device applications owing to their expedient properties such as high level of exposed active locations, cascade electrocatalytic sites, and large surface area. However, patterning techniques for mesoporous substrates are still limited to metal oxide and silica films, although there is growing demand for developing techniques related to patterning mesoporous metals. In this study, the first demonstration of mesoporous metal films on patterned gold (Au) substrates, prefabricated using photolithographic techniques, is reported. First, different growth rates of mesoporous Au metal films on patterned Au substrates are demonstrated by varying deposition times and voltages. In addition, mesoporous Au films are also fabricated on various patterns of Au substrates including stripe and mesh lines. An alternative fabrication method using a photoresist insulating mask also yields growth of mesoporous Au within the patterning. Moreover, patterned mesoporous films of palladium (Pd) and palladium-copper alloy (PdCu) are demonstrated on the same types of substrates to show versatility of this method. Patterned mesoporous Au films (PMGFs) show higher electrochemically active surface area (ECSA) and higher sensitivity toward glucose oxidation than nonpatterned mesoporous Au films (NMGF).

18.
Chem Soc Rev ; 48(24): 5717-5751, 2019 Dec 09.
Article in English | MEDLINE | ID: mdl-31720618

ABSTRACT

The detection of clinically relevant disease-specific biomolecules, including nucleic acids, circulating tumor cells, proteins, antibodies, and extracellular vesicles, has been indispensable to understand their functions in disease diagnosis and prognosis. Therefore, a biosensor for the robust, ultrasensitive, and selective detection of these low-abundant biomolecules in body fluids (blood, urine, and saliva) is emerging in current clinical research. In recent years, nanomaterials, especially superparamagnetic nanomaterials, have played essential roles in biosensing due to their intrinsic magnetic, electrochemical, and optical properties. However, engineered multicomponent magnetic nanoparticle-based current biosensors that offer the advantages of excellent stability in a complex biomatrix; easy and alterable biorecognition of ligands, antibodies, and receptor molecules; and unified point-of-care integration have yet to be achieved. This review introduces the recent advances in superparamagnetic nanostructures for electrochemical and optical biosensing for disease-specific biomarkers. This review emphasizes the synthesis, biofunctionalization, and intrinsic properties of nanomaterials essential for robust, ultrasensitive biosensing. With a particular emphasis on nanostructure-based electrochemical and optical detection of disease-specific biomarkers such as nucleic acids (DNA and RNA), proteins, autoantibodies, and cells, this review also chronicles the needs and challenges of nanoarchitecture-based detection. These summaries provide further insights for researchers to inspire their future work on the development of nanostructures for integrating into biosensing and devices for a broad field of applications in analytical sensing and in clinic.


Subject(s)
Biosensing Techniques/methods , Magnetite Nanoparticles/chemistry , Animals , Antibodies/analysis , Biomarkers/analysis , Biosensing Techniques/instrumentation , Electrochemical Techniques/instrumentation , Electrochemical Techniques/methods , Equipment Design , Humans , Magnetite Nanoparticles/ultrastructure , Nanotechnology/methods , Nucleic Acids/analysis , Proteins/analysis
19.
ACS Nano ; 13(10): 11572-11581, 2019 10 22.
Article in English | MEDLINE | ID: mdl-31433939

ABSTRACT

Implantable electronics are of great interest owing to their capability for real-time and continuous recording of cellular-electrical activity. Nevertheless, as such systems involve direct interfaces with surrounding biofluidic environments, maintaining their long-term sustainable operation, without leakage currents or corrosion, is a daunting challenge. Herein, we present a thin, flexible semiconducting material system that offers attractive attributes in this context. The material consists of crystalline cubic silicon carbide nanomembranes grown on silicon wafers, released and then physically transferred to a final device substrate (e.g., polyimide). The experimental results demonstrate that SiC nanomembranes with thicknesses of 230 nm do not experience the hydrolysis process (i.e., the etching rate is 0 nm/day at 96 °C in phosphate-buffered saline (PBS)). There is no observable water permeability for at least 60 days in PBS at 96 °C and non-Na+ ion diffusion detected at a thickness of 50 nm after being soaked in 1× PBS for 12 days. These properties enable Faradaic interfaces between active electronics and biological tissues, as well as multimodal sensing of temperature, strain, and other properties without the need for additional encapsulating layers. These findings create important opportunities for use of flexible, wide band gap materials as essential components of long-lived neurological and cardiac electrophysiological device interfaces.


Subject(s)
Carbon Compounds, Inorganic/chemistry , Platinum/chemistry , Silicon Compounds/chemistry , Electronics , Temperature
20.
J Mater Chem B ; 7(35): 5412-5422, 2019 09 11.
Article in English | MEDLINE | ID: mdl-31414694

ABSTRACT

Nanozymes (nanoparticles with enzyme-like properties) have attracted considerable attention in recent years owing to their intrinsic enzyme-like properties and broad application in the fields of ELISA based immunoassay and biosensing. Herein, we systematically investigate the influence of crystal phases (γ-Fe2O3 and α-Fe2O3) of mesoporous iron oxide (IO) on their peroxidase mimetic activity. In addition, we have also demonstrated the applicability of these mesoporous IOs as nanozymes for detecting the glucose biomarker with a limit of detection (LOD) of 0.9 µM. Mesoporous γ-Fe2O3 shows high nanozyme activities (and magnetism) toward the catalytic oxidation of chromogenic substances, such as 3,3',5,5'-tetramethylbenzidine (TMB) and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid)-ABTS, as well as for the colourimetric detection of glucose, compared to that of α-Fe2O3. We believe that this in-depth study of crystal structure based nanozyme activity will guide designing highly effective nanozymes based on iron oxide nanostructures for chemical sensing, biosensing and environmental remediation.


Subject(s)
Biomimetics , Biosensing Techniques , Ferric Compounds/chemistry , Glucose/analysis , Nanoparticles/chemistry , Oxidation-Reduction
SELECTION OF CITATIONS
SEARCH DETAIL
...