Harmonic resonance and entrainment of propagating chemical waves by external mechanical stimulation in BZ self-oscillating hydrogels.

Smart polymer materials that are nonliving yet exhibit complex "life-like" or biomimetic behaviors have been the focus of intensive research over the past decades, in the quest to broaden our understanding of how living systems function under nonequilibrium conditions. Identification of how chemical and mechanical coupling can generate resonance and entrainment with other cells or external environment is an important research question. We prepared Belousov-Zhabotinsky (BZ) self-oscillating hydrogels which convert chemical energy to mechanical oscillation. By cyclically applying external mechanical stimulation to the BZ hydrogels, we found that when the oscillation of a gel sample entered into harmonic resonance with the applied oscillation during stimulation, the system kept a "memory" of the resonant oscillation period and maintained it post stimulation, demonstrating an entrainment effect. More surprisingly, by systematically varying the cycle length of the external stimulation, we revealed the discrete nature of the stimulation-induced resonance and entrainment behaviors in chemical oscillations of BZ hydrogels, i.e., the hydrogels slow down their oscillation periods to the harmonics of the cycle length of the external mechanical stimulation. Our theoretical model calculations suggest the important roles of the delayed mechanical response caused by reactant diffusion and solvent migration in affecting the chemomechanical coupling in active hydrogels and consequently synchronizing their chemical oscillations with external mechanical oscillations.

Antimicrobial Peptide Assembly on Zwitterionic Polymer Films to Slow Down Biofilm Formation.

Formation of biofilms on equipment used in various fields, such as medicine, domestic sanitation, and marine transportation, can cause serious problems. The use of antibiofouling and bactericidal modifications is a promising strategy for inhibiting bacterial adhesion and biofilm formation. To further enhance the antibiofilm properties of a surface, various combinations of bactericidal modifications alongside antibiofouling modifications have been developed. Optimization of the arrangements of antimicrobial peptides on the antibiofouling surface would allow us to design longer-life antibiofilm surface modifications. In this study, a postmodification was conducted with different design using the antimicrobial peptide KR12 on an antibiofouling copolymer film consisting of 2-methacryloyloxyethyl phosphorylcholine, 3-methacryloxypropyl trimethoxysilane, and 3-(methacryloyloxy) propyl-tris(trimethylsilyloxy) silane. The distance of KR12 from the film was adjusted by combining different lengths of poly(ethylene glycol) (PEG) spacers (molecular weights are 2000 and 5000). The density of KR12 was ranged from 0.06 to 0.22 nm-2. When these modified surfaces were exposed to a nutrient-rich TSB suspension, the bacterial area formed by E. coli covered 5-127% of the original copolymer film. We found that a significant distance between the bactericidal and antibiofouling modifications, along with a higher density of bactericidal modifications, slows down the biofilm formation.

Superior antibacterial surfaces using hydrophilic, poly(MPC) and poly(mOEGMA) free chains of amphiphilic block copolymer for sustainable use.

Surface modification of electrically neutral hydrophilic polymers is one of the most promising methods for preventing biofouling and biological contamination by proteins and bacteria. Surface modification of inorganic materials such as silica-based glass can render them more durable and thus help in achieving the sustainable development goals. This study reports a novel method for the simple and effective surface modification of glass surfaces with amphiphilic block copolymers possessing the silane coupling segment composed of 3-(methacryloyloxy)propyltris (trimethylsilyloxy) silane and 3-methacryloxypropyltrimethoxysilane. The ability of hydrophilic segments composed of either 2-methacryloyloxyethyl phosphorylcholine (MPC) or poly(ethylene glycol) methyl ether methacrylate (mOEGMA) to prevent bacterial adhesion was investigated. The target block copolymers were prepared by reversible addition-fragmentation chain transfer polymerization and the monomer units of the hydrophilic segments were controlled to be either 120 or 160. The polymers were modified on the substrate by dip-coating. Contact angle measurements indicated that the block copolymer with the PMPC hydrophilic segment formed a hydrophilic surface without pre-hydration, while those with the PmOEGMA hydrophilic segment-coated surface became hydrophilic upon immersion in water. The block copolymer-coated surfaces decreased S. aureus adhesion, and a significant reduction was observed with the MPC-type block copolymer. The following surface design guidelines were thus concluded: (1) the block copolymer is superior to the random copolymer and (2) increasing the hydrophilic segment length further decreases bacterial adhesion.

Preparation of cellular membrane-mimicking glycopolymer interfaces by a solvent-assisted method on QCM-D sensor chips and their molecular recognition.

Carbohydrate-based membranes that show molecular recognition ability are interesting mimics of biointerfaces. Herein, we prepared glycopolymer membranes on QCM-D sensor chips using a solvent-assisted method and investigated their interactions with a target lectin. The membrane containing the glycopolymer with a random arrangement of the carbohydrate units adsorbed more lectin than that containing the glycopolymer with an organized block of carbohydrate units.

Bactericidal Ability of Well-Controlled Cationic Polymer Brush Surfaces and the Interaction Analysis by Quartz Crystal Microbalance with Dissipation.

In this study, cationic poly(2-(methacryloyloxy)ethyl) trimethylammonium chloride) (PMTAC) brush surfaces were prepared by surface-initiated atom transfer radical polymerization (SI-ATRP), and their properties were systematically investigated to discuss the factors affecting their bactericidal properties and interactions with proteins. Model equations for the analysis of electrophoretic behaviors were considered for accurate parameter estimation to indicate the charge density at the interface. The zeta potential dependency of the PMTAC brushes was successfully analyzed using Smolchowski's equation and the Gouy-Chapman model, which describes the diffusive electric double layer. The analysis of the quartz crystal microbalance with dissipation (QCM-D) indicated that the electrostatic interaction promoted protein adsorption, with a large quantity of a negatively charged protein, bovine serum albumin (BSA), being adsorbed. The bactericidal efficiency of the high-graft-density polymer brush (0.45 chains nm-2) was higher than that of the low-graft-density polymer brush (0.06 chains nm-2). To investigate the mechanism of this phenomenon, we applied the dissipation change (ΔD) of QCM-D analysis. The BSA was likewise adsorbed when the brush structure was changed; however, the negative ΔD indicated that the BSA-adsorbed, high-graft-density PMTAC brush became a rigid state. In the bacteria culture media, the behaviors were the same as BSA adsorption, and the high-graft-density polymer brush was also estimated to be more rigid than the low-graft-density polymer brush. Moreover, for S. aureus adhesion after incubating in TSB, a small slope of ΔD/ΔF plots considered initial adsorption of bacteria on the high-graft-density polymer brush strongly interacted compared to that of the low-graft-density polymer brush. The scattered value of the slope of ΔD/ΔF on the high-graft-density polymer brush was considered to be due to the dead bacteria between the bacteria and the polymer brush interface. These investigations for a well-defined cationic polymer brush will contribute to the design of antibacterial surfaces.

Cell Spheroid Formation on the Surface of Multi-Block Copolymers Composed of Poly(2-methoxyethyl acrylate) and Polyethylene Glycol.

3D structured cells have great drug screening potential because they mimic in vivo tissues better than 2D cultured cells. In this study, multi-block copolymers composed of poly(2-methoxyethyl acrylate) (PMEA) and polyethylene glycol (PEG) are developed as a new kind of biocompatible polymers. PEG imparts non-cell adhesion while PMEA acts as an anchoring segment to prepare the polymer coating surface. The multi-block copolymers show higher stability in water than PMEA. A specific micro-sized swelling structure composed of a PEG chain is observed in the multi-block copolymer film in water. A single NIH3T3-3-4 spheroid is formed in 3 h on the surface of the multi-block copolymers with 8.4 wt% PEG. However, at a PEG content of 0.7 wt%, spheroid formed after 4 days. The adenosine triphosphate (ATP) activity of cells and the internal necrotic state of the spheroid change depending on PEG loading in the multi-block copolymers. As the formation rate of cell spheroid on low-PEG-ratio multi-block copolymers is slow, internal necrosis of cell spheroid is less likely to occur. Consequently, the cell spheroid formation rate by changing the PEG chain content in multi-block copolymers is successfully controlled. These unique surfaces are suggested to be useful for 3D cell culture.

Autonomous Vesicle/Sheet Transformation of Cell-Sized Lipid Bilayers by Hetero-Grafted Copolymers.

Lipid bilayer transformations are involved in biological phenomena including cell division, autophagy, virus infection, and vesicle transport. Artificial materials to manipulate membrane dynamics play a vital role in cellular engineering and drug delivery technology that accesses the membranes of cells or liposomes. Transformation from 3D lipid vesicles to 2D nanosheets is thermodynamically prohibited because the apolar/polar interfaces between the hydrophobic bilayer edges and water are energetically unfavorable. We recently reported that cell-sized lipid vesicles (or giant vesicles) can be thoroughly transformed to 2D nanosheets by the addition of the amphiphilic E5 peptide and a cationic graft copolymer. Here, to understand the mechanisms underlying the lipid nanosheet formation, we systematically investigated the structural effects of the cationic copolymers on nanosheet formation. We found that lipid nanosheet formation is controlled in an all-or-nothing manner when the graft content of the copolymer is increased from 5.7 mol % to 7.7 mol %. This finding prompted us to obtain autonomous 2D/3D transformation system. A newly designed hetero-grafted cationic copolymers with thermoresponsive poly(N-isopropylacrylamide) grafts enables spontaneous 3D vesicle/2D nanosheet transformation in response to temperature. These findings would enable us to obtain smart nanointerfaces that trigger cell-sized lipid membrane dynamics in response to diverse stimuli and to create 2D-3D convertible lipid-based biomaterials.

Self-oscillating chemoelectrical interface of solution-gated ion-sensitive field-effect transistor based on Belousov-Zhabotinsky reaction.

The Belousov-Zhabotinsky (BZ) self-oscillation reaction is an important chemical model to elucidate nonequilibrium chemistry in an open system. However, there are only a few studies on the electrical behavior of pH oscillation induced by the BZ reaction, although numerous studies have been carried out to investigate the mechanisms by which the BZ reaction interacts with redox reactions, which results in potential changes. Needless to say, the electrical characteristic of a self-oscillating polymer gel driven by the BZ reaction has not been clarified. On the other hand, a solution-gated ion-sensitive field-effect transistor (ISFET) has a superior ability to detect ionic charges and includes capacitive membranes on the gate electrode. In this study, we carried out the electrical monitoring of self-oscillation behaviors at the chemoelectrical interface based on the BZ reaction using ISFET sensors, focusing on the pH oscillation and the electrical dynamics of the self-oscillating polymer brush. The pH oscillation induced by the BZ reaction is not only electrically observed using the ISFET sensor, the electrical signals of which results from the interfacial potential between the solution and the gate insulator, but also visualized using a large-scale and high-density ISFET sensor. Moreover, the N-isopropylacrylamide (NIPAAm)-based self-oscillating polymer brush with Ru(bpy)3 as a catalyst clearly shows a periodic electrical response based on the swelling-deswelling behavior caused by the BZ reaction on the gate insulator of the ISFET sensor. Thus, the elucidation of the electrical self-oscillation behaviors induced by the BZ reaction using the ISFET sensor provides a solution to the problems of nonequilibrium chemistry.

Design of biointerfaces composed of soft materials using controlled radical polymerizations.

Soft interface materials have an immense potential for the improvement of biointerfaces, which are the interface of biological and artificially designed materials. Controlling the chemical and physical structures of the interfaces at the nanometer level plays an important role in understanding the mechanism of the functioning and its applications. Controlled radical polymerization (CRP) techniques, including atom transfer radical polymerization (ATRP) and reversible addition-fragmentation chain-transfer (RAFT) polymerization, have been developed in the field of precision polymer chemistry. It allows the formation of well-defined surfaces such as densely packed polymer brushes and self-assembled nanostructures of block copolymers. More recently, a novel technique to prepare polymers containing biomolecules, called biohybrids, has also been developed, which is a consequence of the advancement of CRP so as to proceed in an aqueous media with oxygen. This review article summarizes recent advances in CRP for the design of biointerfaces.

Cell Adhesion and Migration on Thickness Gradient Bilayer Polymer Brush Surfaces: Effects of Properties of Polymeric Materials of the Underlayer.

In the field of tissue engineering and biomaterials, controlling the surface properties and mechanical properties of scaffold materials is crucial and has attracted much attention. Here, two types of bilayer polymer brushes composed of a hydrophilic underlying layer and a cationic surface layer [made of poly(2-aminoethyl methacrylate)] with a thickness gradient were prepared by surface-initiated atom-transfer radical polymerization. To investigate the influence of the stiffness as a mechanical property of the polymer brush on cell behavior, the underlayer was prepared from either 2-methacryloyloxyethyl phosphorylcholine or oligo(ethylene glycol) methyl ether methacrylate, with the bilayers designated as gradient poly(2-methacryloyloxyethyl phosphorylcholine)-block-poly(2-aminoethyl methacrylate) [grad-pMbA] and gradient poly(oligo[ethylene glycol] methyl ether methacrylate)-block-poly(2-aminoethyl methacrylate) [grad-pEGbA], respectively. Characterization of these surfaces was performed by spectroscopic ellipsometry, X-ray reflectivity, and determination of the zeta potential, static contact angle, and force curve. These diblock copolymer brushes with a thickness gradient helped to distinguish the effects of the mechanical and surface properties of the brushes on cell behavior. The attachment and motility of L929 fibroblasts and epithelial MCF 10A cells on the fabricated brushes were then assessed. L929 cells had a round shape on the thin surface layer of grad-pMbA and spread well on thicker areas. In contrast, MCF 10A cells spread well in areas of any thickness of either grad-pMbA or grad-pEGbA. Single MCF 10A cells migrated randomly on grad-pMbA, whereas grouped cells started to climb up along the thickness gradient of grad-pMbA. In contrast, both single and grouped MCF 10A cells migrated randomly on grad-pEGbA. These thickness gradient diblock copolymer brushes are simple, reproducible, and reasonable platforms that can facilitate practical applications of biomaterials, for example, in tissue engineering and biomaterials.

pH-Responsive Water-Soluble Polymer Carriers for Cell-Selective Metabolic Sialylation Labeling.

Cell-surface sialic acids can be metabolically labeled and subsequently modified using bioorthogonal chemistry. The method has great potential for targeted therapy and imaging; however, distinguishing the sialylation of specific cells remains a major challenge. Here, we described a cell-selective metabolic sialylation labeling strategy based on water-soluble polymer carriers presented with pH-responsive N-azidoacetylmannosamine (ManNAz) release. 2-Methacryloyloxyethyl phosphorylcholine contributed to increased water solubility and reduced nonspecific attachment to cells. Lactobionic acid residues, used for cell selectivity, recognized overexpressed receptors on target hepatoma cells and mediated cellular internalization. ManNAz caged by acidic pH-responsive carbonated ester linkage on the polymer was released inside target cells and expressed as azido sialic acid. Additionally, longer copolymer carriers enhanced the metabolic labeling efficiency of sialylation. This approach provides a platform for cell-selective labeling of sialylation and can be applied to high-resolution bioimaging and targeted therapy.

Delayed Mechanical Response to Chemical Kinetics in Self-Oscillating Hydrogels Driven by the Belousov-Zhabotinsky Reaction.

We show experimentally that chemical and mechanical self-oscillations in Belousov-Zhabotinsky hydrogels are inherently asynchronous, that is, there is a detectable delay in swelling-deswelling response after a change in the chemical redox state. This phenomenon is observable in many previous experimental studies and potentially has far-reaching implications for the functionality and response time of the material in future applications; however, so far, it has not been quantified or reported systematically. Here, we provide a comprehensive qualitative and quantitative description of the chemical-to-mechanical delay, and we propose to explain it as a consequence of the slow nonequilibrium swelling-deswelling dynamics of the polymer material. Specifically, standard hydrogel pieces are large enough that transport processes, for example, counterion migration and water diffusion, cannot occur instantaneously throughout the entire gel piece, as opposed to previous theoretical considerations. As a result, the volume response of the polymer to a chemical change may be governed by a characteristic response time, which leads to the emergence of delay in mechanical oscillation. This is supported by our theoretical calculations.

Fluorescent polymeric nanoparticle for ratiometric temperature sensing allows real-time monitoring in influenza virus-infected cells.

Temperature is a key indicator of infection and disease, however, it is difficult to measure at a cellular level. Nanoparticles are applied to measure the cellular temperature, and enhancement of the stability and reliability of the signal and higher biocompatibility are demanded. We have developed fluorescent polymeric nanoparticles loaded with temperature-sensitive units (as rhodamine B) and internal reference units (as coumarin) for imaging and ratiometric sensing of the cellular temperature in the physiological range. The fluorescence signal of the nanoparticles was stable in the bio-environment and the ratiometric sensing strategy could overcome the concentration effect of nanoparticles. The nanoparticles were endocytosed by cells and partially presented in mitochondria. The fluorescence intensity ratio of rhodamine B and coumarin using nanoparticles showed good linear correlations in buffer solutions, cell suspensions, and imaging of living cells. Using the fluorescent polymeric nanoparticles, the change of temperature of cells during influenza virus infection could be individually monitored.

Evaluation of bacterial adhesion strength on phospholipid copolymer films with antibacterial ability using microfluidic shear devices.

Biomimetic phospholipid copolymer films are known to possess antifouling properties against protein adsorption and biofilm formation. However, the interactions between bacterial cells and material surfaces are not fully understood. This work investigated the bacterial adhesion strength of phospholipid copolymer films using a shear stress-tunable microfluidic device. The copolymer, comprising 2-methacryloyloxyethyl phosphorylcholine (MPC), 3-methacryloxypropyl trimethoxysilane (MPTMSi), and 3-(methacryloyloxy) propyl-tris(trimethylsilyloxy) silane (MPTSSi), formed crosslinked films on glass substrates; the thickness of the coating film was controlled by the polymer concentration during dip-coating. Polymer films with two typical thicknesses, 20 and 40 nm (denoted as C-20 and C-40, respectively), were prepared on the bottom wall of the microfluidic device. After seeding S. aureus in the microfluidic device, several shear stresses were applied to evaluate the adhesion strength of the polymer films. S. aureus was found to have weaker adhesion strength on the C-40 surface than on the C-20 surface; numerous bacterial cells detached from the C-40 surface on application of identical shear stress. To mimic the presence of plasma protein, fibrinogen (Fg) was introduced into the device before performing the bacterial adhesion assay. The results showed that the adsorption of Fg promoted S. aureus adhesion and strong interactions under shear stress. However, the adhesion strength of S. aureus did not affect the Fg adsorption for both the C-20 and C-40 surfaces. Using the shear stress-tunable microfluidic device, we found that the adhesion of S. aureus on the thicker and softer phospholipid copolymer was weak, and the cells easily detached under high shear stress.

High Dye-Loaded and Thin-Shell Fluorescent Polymeric Nanoparticles for Enhanced FRET Imaging of Protein-Specific Sialylation on the Cell Surface.

Nanoparticle-based probes have great potential for imaging specific biomolecules in signal distinguishing and amplification via Förster resonance energy transfer (FRET). Protein-specific sialylation plays key roles in the regulation of protein structure and function, as well as in various pathophysiological processes. Here, we developed a fluorescent polymeric nanoparticle with a biocompatible hydrophilic thin shell loaded with plentiful dye and used it as the donor to enhance the FRET imaging of cell surface protein-specific sialylation. The hydrophobic core decreased the self-quenching of loaded fluorescent molecules, while the hydrophilic thin shell ensured that the nanoparticles remained on the extracellular surface and guaranteed the FRET effect. Thus, the thin-shell polymeric nanoparticles enhanced the FRET imaging of protein tyrosine kinase-7-specific sialylation on the CCRF-CEM cell surface and showed high sensitivity under drug treatment. This nanoparticle has great potential for elucidating the relationship between dynamic specific glycosylation states and disease processes, as well as for the study of new cell surface imaging methodologies.

Study on Bacterial Antiadhesiveness of Stiffness and Thickness Tunable Cross-Linked Phospholipid Copolymer Thin-Film.

Bacterial adhesion on material surfaces is a significant problem in many areas, especially on medical devices. Upon colonizing a surface, bacteria tend to form biofilms and become difficult to eradicate. A multistep process is involved in bacterial biofilm formation, including primary adhesion to material surface and accumulation of bacterial cells. Controlling the primary adhesion of bacteria is an efficient way to manage biofilms. This study focused on the primary adhesion of bacteria on a copolymer thin-film composed of 2-methacryloyloxyethyl phosphorylcholine (MPC), 3-methacryloxypropyl trimethoxysilane (MPTMSi), and 3-(methacryloyloxy) propyl-tris(trimethylsilyloxy) silane (MPTSSi), which has anti-biofouling and thickness and stiffness tunable properties. We modulated the thickness (5-90 nm) and stiffness of the thin-film via changing the polymer concentration in the coating solution (dip coating). All polymer thin-films inhibited Gram-positive Staphylococcus aureus and Gram-negative Pseudomonas aeruginosa primary adhesions. Interestingly, S. aureus adhesion was affected by the thickness and/or stiffness of the thin-film. We conclude that the mechanical property of the thin-film is one of the influential factors determining bacterial adhesion. These findings would be of significance in designing antibacterial materials.

Cationic Copolymer-Chaperoned 2D-3D Reversible Conversion of Lipid Membranes.

Nanosheets have thicknesses on the order of nanometers and planar dimensions in the micrometer range. Nanomaterials that are capable of converting reversibly between 2D nanosheets and 3D structures in response to specific triggers can enable construction of nanodevices. Supra-molecular lipid nanosheets and their triggered conversions to 3D structures including vesicles and cups are reported. They are produced from lipid vesicles upon addition of amphiphilic peptides and cationic copolymers that act as peptide chaperones. By regulation of the chaperoning activity of the copolymer, 2D to 3D conversions are reversibly triggered, allowing tuning of lipid bilayer structures and functionalities.

Stable and Prolonged Autonomous Oscillation in a Self-Oscillating Polymer Brush Prepared on a Porous Glass Substrate.

We developed an autonomous functional surface, named a "self-oscillating polymer brush surface", which exhibits swelling-deswelling of the modified polymer chains synchronized with the Belousov-Zhabotinsky (BZ) reaction. The grafted polymer chain is a random copolymer composed of thermoresponsive N-isopropylacrylamide, N-(3-aminopropyl)methacrylamide, and ruthenium tris(2,2'-bipyridine) [Ru(bpy)3]. To provide stable oscillations over a long period of time, suppression of the dilution of the BZ reactants inside the polymer surface and the increase in the amount of immobilized Ru(bpy)3 are important. Here, we modified the self-oscillating polymer brush on a porous glass substrate and characterized its dynamic behavior. The increased surface area of the porous glass allowed for an efficient introduction of the metal catalyst, which resulted in a stable BZ reaction observable by optical microscopy. Compared with an aqueous BZ solution and the self-oscillating polymer modified on a glass coverslip, the wave velocity and diffusion coefficient were significantly lower for the porous glass system, which suggested that the reaction-diffusion of the reactants was markedly different than those of the other two systems. Moreover, the wave velocity was unchanged on the porous glass system for 1 h, whereas that of the solution dropped by 30 µm s-1. Waveform analyses based on the Field-Körös-Noyes mechanism revealed that densely packed Ru(bpy)3 in the porous glass system affects the duration of the key processes in the BZ reaction. These findings can help with understanding the dynamic behavior of the self-oscillating polymer brush on a porous glass substrate. Stable self-oscillations on the polymer brush-grafted porous glass substrate will aid future applications such as mass transport systems.

Liposome-Surface-Initiated ARGET ATRP: Surface Softness Generated by "Grafting from" Polymerization.

Liposomes are self-assembled vesicles of amphiphilic lipid molecules, which have been investigated as models of cells, or tools for drug delivery systems. In these systems, the surface property of the liposomes plays an important role. In this study, we demonstrated a novel polymer modification of liposome surfaces using a controlled radical polymerization, "activators regenerated by electron transfer for atom transfer radical polymerization", in aqueous media without a deoxygenation step. Dynamic light scattering and 1H NMR measurement indicated the successful modification of the polymer on the liposome surface. The molecular weight of the grafted polymer chain was systematically controlled by changing the monomer concentrations in the "grafting from" polymerization. Moreover, the modification resulted in a notable increase in surface softness as indicated by electrophoretic behavior, which was comparable to the surface of cells. The preparation method and the characterization presented in this study would be a helpful guideline in designing the polymer/liposome hybrid having target surface properties.

Cationic Copolymers Act As Chaperones of a Membrane-Active Peptide: Influence on Membrane Selectivity.

Membrane-active peptides have potential as drug delivery tools for control of lipid bilayer structures in cells and liposomes. In a previous study, we reported that a cationic comb-type copolymer, poly(allylamine)-graft-dextran (PAA-g-Dex), forms a soluble interpolyelectrolyte complex with an anionic peptide, E5, and enhances its membrane-disrupting activity. Furthermore, the E5/PAA-g-Dex complex augments the cellular membrane permeability of other proteins. In this study, the affinities of the E5/PAA-g-Dex complex for lipid membranes with various compositions were determined. Secondary structure analysis of E5 and analyses of binding of E5 to liposomes revealed that lipid composition strongly influenced the interaction. No significant folding of E5 alone was observed at either pH 5.4 or pH 7.4 and folding into the functional conformation, which is both N-terminal and C-terminal helix, was observed only at pH 5.4 in the presence of liposomes having liquid-disordered phase (Ld). PAA-g-Dex induced partial folding of E5, presumably at C-terminus, at both pH 5.4 and pH 7.4. Folding of E5 into the functional structure was induced by the addition of liposomes having Ld phases at either pH 5.4 or pH 7.4. A leakage assay showed that PAA-g-Dex enhanced the membrane-permeabilizing activity of E5 by promoting the adsorption of E5 onto the surface of liposomes and/or E5 association with the lipid bilayer. These results indicated that E5 activated by PAA-g-Dex destabilizes the lipid membrane having Ld phase even when the lipid membrane has a heterogeneous phase separated structure. Hence, PAA-g-Dex serves as a chaperone for E5 without altering its membrane selectivity. The chaperoning activity of this comb-type copolymer may activate other ionic peptides with unstable structures and low solubility.