ABSTRACT
We demonstrate the upscaling of inkjet-printed metal halide perovskite light-emitting diodes. To achieve this, the drying process, critical for controlling the crystallization of the perovskite layer, was optimized with an airblade-like slit nozzle in a gas flow assisted vacuum drying step. This yields large, continuous perovskite layers in light-emitting diodes with an active area up to 1600 mm2.
ABSTRACT
Irradiation-induced phase segregation in mixed methylammonium halide perovskite samples such as methylammonium lead bromide-iodide, MAPb(IxBr1-x)3, is being studied intensively because it limits the efficiency of wide band gap perovskite solar cells. It has been postulated that this phenomenon depends on the intrinsic ionic (in)homogeneity in samples already induced during film formation. A deeper understanding of the MAPb(IxBr1-x)3 formation processes and the influence of the halide ratio, solvents, and the perovskite precursor composition as well as the influence of processing parameters during deposition, e.g., spin coating and annealing parameters, is still lacking. Here, we use a fiber optic-based optical in-situ setup to study the formation processes of the MAPb(IxBr1-x)3 series on a subsecond time scale during spin coating and thermal annealing. In-situ UV-vis measurements during spin coating reveal the influence of different halide ratios, x, in the precursor solution on the preferential crystallization of the phase. Pure bromide samples directly form a perovskite phase, samples with high iodide content form a solvate intermediate phase, and samples with a mixed stoichiometry between 0.1 ≤ x ≤ 0.6 form both. This leads to a heterogeneous formation process via two competing reaction pathways, that leads to a heterogeneous mixture of phases, during spin coating and rationalizes the compositional heterogeneity of mixed bromide-iodide samples even after annealing.
ABSTRACT
We report on digitally printed distributed feedback lasers on flexible polyethylene terephthalate substrates based on methylammonium lead iodide perovskite gain material. The perovskite lasers are printed with a digital drop-on-demand inkjet printer, providing full freedom in the shape and design of the gain layer. We show that adjusting the perovskite ink increases the potential processing window and decreases the surface roughness of the active layer to less than 7 nm, which is essential for low lasing thresholds. Prototype inkjet-printed perovskite lasers processed on top of nanopatterned rigid as well as flexible substrates are demonstrated. Optimized perovskite gain layers printed on PET substrates demonstrated lasing and showed a linewidth of 0.4 nm and a lasing threshold of 270 kW/cm2. In addition, printing of a distinct shape shows a high level of uniformity, demonstrated by a low spatial resolved full width half maximum variation over the whole printing area. These results reveal the possibilities of digital printed perovskite layers towards large-scale and low-cost laser applications of arbitrary shape.
