High-power single-frequency single-mode all-solid photonic bandgap fiber laser with kHz linewidth.

There have been several demonstrations of single-frequency single-mode ytterbium-doped fiber lasers operating at a few hundred watts of power. A narrow spectral linewidth of these lasers is critical for many applications but has never been properly measured before at high powers. In this work, we report the first spectral linewidth measurement at kHz resolution of high-power single-frequency fiber lasers using a heterodyne technique and can confirm that these lasers can indeed operate at a few kHz spectral linewidth. Furthermore, we have improved the power from single-frequency single-mode all-solid photonic bandgap fiber lasers to 500 W using an improved photonic bandgap fiber.

4.8 mJ pulse energy directly from single-mode Q-switched ytterbium fiber lasers.

Using an ytterbium-doped fiber with a 50 µm core and 0.028 NA, a pulse energy of 4.8 mJ was achieved directly from a single-mode Q-switched fiber laser. The repetition rate was 10 kHz and the average power was 48.4 W. The slope efficiencies with regard to the absorbed and launched pump power were ∼74% and ∼59% respectively. The pulse width decreased with increasing pump power. The 4.8 mJ pulse had a FWHM width of ∼300 ns. A shorter pulse of ∼200 ns FWHM was also achieved at 2.06 mJ in another configuration. The M2 was below 1.3 at all pulse energies. This work demonstrates record pulse energy directly from a single-mode Q-switched fiber laser and the feasibility of operating such a laser with high efficiencies.

kW-level monolithic single-mode narrow-linewidth all-solid photonic bandgap fiber amplifier.

Further power scaling of narrow-linewidth fiber lasers is critical for beam combining. Using all-solid photonic bandgap fibers with large effective mode areas and strong higher-order-mode suppression is an interesting approach. Previously, we demonstrated ∼400W single-frequency single-mode power at 1064 nm from a 50/400 photonic bandgap fiber amplifier, limited only by transverse mode instability (TMI). In this work, we demonstrate a TMI-limited single-mode power of 1.37 kW from a monolithic fiber amplifier with a 25/400 photonic bandgap fiber, the highest output power from a photonic bandgap fiber demonstrated to date, to the best of our knowledge. The spectral linewidth is broadened to ∼8GHz to suppress stimulated Brillouin scattering.

302 W single-mode power from an Er/Yb fiber MOPA: publisher's note.

This publisher's note contains corrections to Opt. Lett.45, 2910 (2020).OPLEDP0146-959210.1364/OL.392786.

Modeling Er/Yb fiber lasers at high powers.

Conventional models of Er/Yb co-doped fibers assume all ytterbium ions are equally involved in the energy transfer with erbium ions, governed by a singular transfer rate. This would predict output power clamping once ytterbium parasitic lasing starts, contrary to the observations that the output continued to grow albeit at a slower rate. One study explained this using elevated temperature at high powers. Our study, however, shows that elevated temperature and mode-dependent effects only play insignificant roles. A new model is developed based on the existence of isolated ytterbium ions, which can explain all the observed experimental behaviors.

302 W single-mode power from an Er/Yb fiber MOPA.

There has been very little progress in the power scaling of Er/Yb fiber lasers in over a decade, reflecting the difficulties involved. Here we report, to the best of our knowledge, a new record of 302 W single-mode power from an Er/Yb fiber master oscillator power amplifier (MOPA) with a record optical efficiency of 56%, near the quantum limit. This is made possible by new fiber development from Nufern and off-resonant pumping of the Er/Yb fiber. We also show that further power scaling is no longer limited by ytterbium parasitic lasing but by fiber fuse in the Er/Yb fiber.

151W monolithic diffraction-limited Yb-doped photonic bandgap fiber laser at ~978nm.

We demonstrate that the strong 4-level Yb emission in a fiber laser can be almost completely suppressed in an Yb all-solid double-clad photonic bandgap fiber, resulting in highly efficient high-power monolithic Yb fiber lasers operating at the 3-level system. We have achieved single-mode continuous wave laser output power of ~151W at ~978nm with an efficiency of 63% with respect to the launched pump power in a practical monolithic fiber laser configuration for the first time. The demonstrated power in this work are setting new records for diffraction-limited double-clad fiber lasers operating at ~978nm.

Highly efficient cladding-pumped single-mode three-level Yb all-solid photonic bandgap fiber lasers.

Efficient cladding-pumped three-level Yb fiber lasers are difficult to achieve due to the competing four-level system and necessary high inversions. We demonstrate an efficiency of ∼62.7% versus a coupled pump, a record for cladding-pumped fiber lasers with a single-pass pump. 84 W at ∼978 nm with ∼1.12M2 was achieved, a record power for flexible fibers. Amplified spontaneous emission was suppressed by >40 dB. The efficiency is quantum-limited ∼94% versus an absorbed pump. This is made possible by the use of a photo-darkening-free Yb phosphosilicate core and recent progress in single-mode large-core all-solid photonic bandgap fiber designs, which provide the necessary large core-to-cladding ratio and suppression of the four-level system.