Smart Shockwave Responsive Titania-Based Nanoparticles for Cancer Treatment.

Nanomedicine is an emerging treatment approach for many cancers, characterized by having high sensitivity and selectivity for tumor cells and minimal toxic effects induced by the conventional chemotherapeutics. In these context, smart nanoparticles (NPs) are getting increasingly relevant in the development of new therapies. NPs with specific chemical composition and/or structure and being stimuli-responsive to magnetic, light or ultrasound waves are new promising tools. In the present work, amorphous-titania propyl-amine functionalized (a-TiO2-NH2) NPs, coated with bovine serum albumin (BSA), are stimulated with high energy shock waves to induce cytotoxic effects in cancer cells. First, a new method to coat a-TiO2-NH2 NPs with BSA (a-TiO2-NH2/BSA) was proposed, allowing for a high dispersion and colloidal stability in a cell culture media. The a-TiO2-NH2/BSA NPs showed no cancer cell cytotoxicity. In a second step, the use of shock waves to stimulate a-TiO2-NH2/BSA NPs, was evaluated and optimized. A systematic study was performed in in vitro cell culture aiming to impair the cancer cell viability: NP concentrations, time steps and single versus multiple shock waves treatments were studied. The obtained results highlighted the relevance of NPs design and administration time point with respect to the shock wave treatment and allow to hypothesize mechanical damages to cells.

SPIONs Prepared in Air through Improved Synthesis Methodology: The Influence of γ-Fe2O3/Fe3O4 Ratio and Coating Composition on Magnetic Properties.

Superparamagnetic iron oxide nanoparticles (SPIONs) have shown great potential in biomedicine due to their high intrinsic magnetization behaviour. These are small particles of magnetite or maghemite, and when coated, their surface oxidation is prevented, their aggregation tendency is reduced, their dispersity is improved, and the stability and blood circulation time are increased, which are mandatory requirements in biomedical applications. In this work, SPIONs were synthesized in air through a reduction-precipitation method and coated with four different polymers (Polyethylene glycol(PEG) 1000/6000 and dextran T10/T70). All the synthesized samples were structurally and magnetically characterized by transmission electron microscopy, Fourier transform infra-red spectroscopy, X-ray powder diffraction, Mössbauer spectroscopy, and Superconducting Quantum Interference Device (SQUID) magnetometry. SPIONs centrifuged and dried in vacuum with an average diameter of at least 7.5 nm and a composition ≤60% of maghemite and ≥40% of magnetite showed the best magnetization results, namely a saturation magnetization of ~64 emu/g at 300 K, similar to the best reported values for SPIONs prepared in controlled atmosphere. As far as SPIONs' coatings are concerned, during their preparation procedure, surface polymers must be introduced after the SPIONs' precipitation. Furthermore, polymers with shorter chains do not affect the SPIONs' magnetization performance, although longer chain polymers significantly decrease the coated particle magnetization values, which is undesirable.

Daylight Bactericidal Titania Textiles: A Contribution to Nosocomial Infections Control.

: Daylight bactericidal cotton (100% cotton) textiles are presented and proposed for future hospital use. Amorphous titania (a-TiO2) and amorphous titania/chitosan complexes (a-TiO2//CS) were the selected bactericidal agents. Nanoparticles (NPs) and films were the two paths designed. Cotton textiles were impregnated with a-TiO2-based NPs or coated with a-TiO2 films. Industrial impregnation/coating will be implemented during the textile finishing treatments. A novel (room temperature and base-catalyzed), green (hydrothermal water as a catalyst), time-saving, and easy scale-up sol-gel process was established to produce the a-TiO2-based NPs. Amorphous-TiO2 films were produced by a dip-in (acid catalyzed) sol-gel solution. The daylight bactericidal performance (without the need of an external ultraviolet light source) of a-TiO2 NPs, films, and impregnated/coated textiles was proven according to AATCC 100 and ASTM E2149, using Staphylococcus aureus (ATCC®6538TM) as the bacterial indicator strain. A bacterial reduction of 99.97% was achieved for the a-TiO2 films and of 99.97% for the a-TiO2/CS NPs. Regarding the impregnated textiles, a bacterial reduction of 91.66% was achieved with a-TiO2/CS NPs, and 99.97% for cotton textiles coated with an a-TiO2 film.

Photonic Band Gap and Bactericide Performance of Amorphous Sol-Gel Titania: An Alternative to Crystalline TiO2.

In addition to its traditional application in white pigments, nanocrystalline titania (TiO2) has optoelectronic and photocatalytic properties (strongly dependent on crystallinity, particle size, and surface structure) that grant this naturally occurring oxide new technological applications. Sol-gel is one of the most widely used methods to synthesize TiO2 films and NPs, but the products obtained (mostly oxy-hydrated amorphous phases) require severe heat-treatments to promote crystallization, in which control over size and shape is difficult to achieve. In this work, we obtained new photocatalytic materials based on amorphous titania and measured their electronic band gap. Two case studies are reported that show the enormous potential of amorphous titania as bactericide or photocatalyst. In the first, amorphous sol-gel TiO2 thin films doped with N (TiO2−xNx, x = 0.75) were designed to exhibit a photonic band gap in the visible region. The identification of Ti-O-N and N-Ti-O bindings was achieved by XPS. The photonic band gaps were found to be 3.18 eV for a-TiO2 and 2.99 eV for N-doped a-TiO2. In the second study, amorphous titania and amine-functionalized amorphous titania nanoparticles were synthetized using a novel base-catalysed sol-gel methodology. All the synthesized amorphous TiO2 nanoparticles exhibit bactericide performance (E. coli, ASTME 2149-13).

Greensilica® vectors for smart textiles.

The present work aims developing a versatile Greensilica® vector/carrier, able to bind to a wide range of textile matrices of carbohydrate polymers and susceptible of being loaded with chemicals/drugs/therapeutic molecules, to create a green tailor-made (multi)functional high-tech textile. A green, eco-friendly, ammonia-free, easily scalable, time-saving sol-gel process was established for the production of those silica-based colloidal particles (SiO2, amine-SiO2, diamine-SiO2, and epoxy-SiO2). Two different textile matrices (cotton, polyester) were functionalized, through the impregnation of Greensilica® particles. The impregnation was performed with and without cure. Diamine-SiO2 colloidal particles exhibited the higher bonding efficiency in cured textile matrices (both cotton and polyester), while with no cure the best adherence to cotton and polyester textile matrices was achieved with diamine-SiO2 and amine-SiO2, respectively. Use once and throw away and continued use applications were envisaged and screened through washing tests. The efficiency of the textiles impregnation was confirmed by SEM, and quantified by ICP.