Quantification of multi-residue levels in peach juices, pulps and peels using dispersive liquid-liquid microextraction based on floating organic droplet coupled with gas chromatography-electron capture detection.

In this paper, polychlorinated biphenyl (PCB), organochlorine pesticide (OCP) and pyrethroid pesticides in peach was investigated by comparing their residual level in peach juice, pulps and peels using dispersive liquid-liquid microextraction based on solidification of floating organic droplet (DLLME-SFO) combined with gas chromatography-electron capture detection (GC-ECD). Extraction conditions such as the type of extractant, volume of extractant and dispersant, salt effect and extraction time were optimized. For juice samples, the linearity of the method was obtained in the range of 10-2000 ng L(-1),with determination coefficients>0.99. The limits of detection (LOD) of the method were ranged between 2.8 and 18.5 ng L(-1). For pulp and peel samples, the developed method is linear over the range assayed, 1-20 µg kg(-1),with coefficients also >0.99. The relative recoveries of compounds analyzed from juice, pulp and peel samples were in the range of 73-106% with a relative standard deviation between 2.6 and 11.8%. The proposed method was applied to the simultaneous analysis of residues in real peach juice, pulp and peel samples. As a result, there were no target analytes found in peach juices and pulps while 3.3 µg kg(-1) cyhalothrin and 3.5 µg kg(-1) fenvalerate were found in peels. The experiment results revealed that the pyrethroid residues just deposited on the peels of the fruits, but did not move into pulps and juices.

Novel polymer monolith microextraction using a poly-(methyl methacrylate-co-ethylene dimethacrylate) monolith and its application to the determination of polychlorinated biphenyls in water samples.

A novel and simple method based on polymer monolith microextraction (PMME) coupled to gas chromatography with electron-capture detection (GC-ECD) was developed for the determination of six polychlorinated biphenyls (PCBs) residues in water samples. The proposed method used poly-(methyl methacrylate-co-ethylene dimethacrylate) (MMA-co-EDMA) monolith as extraction media. Several factors affecting experiments such as sample flow rate, sample volume, the type of eluent, eluent volume, eluent flow rate, effect of salt addition and carry over effect were investigated and optimized systematically. The limits of detection (LODs) for six PCBs were 0.028-0.043 ng mL(-1) in water samples. The intra-day and inter-day precisions (R.S.D.) were less than 9.2% and 9.6%, respectively. The proposed method was successfully applied to the determination of six PCBs in tap water, lake water and industrial waste water and the trueness has been evaluated by recovery experiments. The obtained relative recoveries were in the range of 63.3-105.6%.

Development of a novel ultrasound-assisted surfactant-enhanced emulsification microextraction method and its application to the analysis of eleven polycyclic aromatic hydrocarbons at trace levels in water.

A novel ultrasound-assisted surfactant-enhanced emulsification microextraction (UASEME) technique has been proposed by using low-density extraction solvents. In the proposed technique, Tween 80 and cyclohexane were injected into 5-mL glass test tubes with conical bottoms, containing 5.00 mL of a water sample that was located inside the ultrasonic bath. When the extraction process was finished, the glass test tube was sealed with a rubber plug and then placed upside down in a centrifuge. The finely dispersed droplets of cyclohexane collected at the conical bottom of test tube because the density of cyclohexane is less than of water, and the PAHs were concentrated in the cyclohexane. Next, 5 µL of the cyclohexane that collected at the conical bottom was removed using a 10-µL microsyringe and injected into high performance liquid chromatography coupled with fluorescence detection (HPLC-FLD) for analysis. The proposed method avoided the use of chlorinated solvents, which have been widely used as extraction solvents in a normal UASEME assay. Parameters that affected the extraction efficiency, such as the type and volume of the extraction solvent, the type and concentration of the surfactant, and the ultrasound emulsification time and salt addition, were investigated and optimised for the method. Under the optimum conditions, the enrichment factors ranged between 90 and 247. The limits of detection of the method were 0.6-62.5 ng L(-1). Good recoveries and repeatability of the method for the eleven PAHs were also obtained. The proposed UASEME technique has been demonstrated to be simple, practical and environmentally friendly for the determination of PAH residues in real water samples.

Dispersive liquid-liquid microextraction based on the solidification of floating organic droplet for the determination of polychlorinated biphenyls in aqueous samples.

In the proposed method, an extraction solvent with a lower toxicity and density than the solvents typically used in dispersive liquid-liquid microextraction was used to extract seven polychlorinated biphenyls (PCBs) from aqueous samples. Due to the density and melting point of the extraction solvent, the extract which forms a layer on top of aqueous sample can be collected by solidifying it at low temperatures, which form a layer on top of the aqueous sample. Furthermore, the solidified phase can be easily removed from the aqueous phase. Based on preliminary studies, 1-undecanol was selected as the extraction solvent, and a series of parameters that affect the extraction efficiency were systematically investigated. Under the optimized conditions, enrichment factors for PCBs ranged between 494 and 606. Based on a signal-to-noise ratio of 3, the limit of detection for the method ranged between 3.3 and 5.4 ng L(-1). Good linearity, reproducibility and recovery were also obtained.

Propyl 4-hydroxy-benzoate.

There are two mol-ecules in the asymmetric unit of the title compound, C(10)H(12)O(3). In the crystal, mol-ecules are linked by O-H⋯O hydrogen bonds into chains running along [010]. Adjacent chains are joined together by weak π-π inter-actions between benzene rings [centroid-centroid distance = 4.040 (2) Å].