Water Condensation in the Nanoscale Pores of Pt/C Catalyst Particles and Its Impact on Catalyst Utilization: A Simulation Based on a Reconstructed Structure from Nanoimaging.

In polymer electrolyte membrane fuel cells, carbon-supported platinum (Pt/C) catalyst particles require sufficient water condensation within the nanoscale pores to effectively utilize the interior Pt catalysts. Since experimental visualizations with nanoscale precision of this phenomenon are not yet possible, we utilized a Pt/C catalyst particle reconstructed from segmented nanoimaging of a catalyst powder, which served as the computational domain for lattice density functional theory (LDFT) simulation of water condensation. Paired with experimental water uptake data, LDFT successfully simulated high-resolution water condensation, capturing both thin-film and capillary water condensation phenomena. Using a simple proton movement method within the water network, we reproduced the Pt utilization data from a CO stripping experiment. Our findings highlight that at low relative humidity (RH), Pt utilization is influenced by thin water film formations, mainly dictated by the wettability properties of surfaces within primary pores and the Pt/C catalyst particle's exterior. Conversely, at high RH, Pt utilization is attributed to capillary water condensation in medium-to-large sized pores. This approach contributes a qualitative and quantitative discussion on hypotheses regarding the mechanism of Pt utilization, supporting recent studies (e.g., Girod, R.; Nat. Catal. 2023, 6, (5), 383-391).

Contrast variation method applied to structural evaluation of catalysts by X-ray small-angle scattering.

In the process of developing carbon-supported metal catalysts, determining the catalyst particle-size distribution is an essential step, because this parameter is directly related to the catalytic activities. The particle-size distribution is most effectively determined by small-angle X-ray scattering (SAXS). When metal catalysts are supported by high-performance mesoporous carbon materials, however, their mesopores may lead to erroneous particle-size estimation if the sizes of the catalysts and mesopores are comparable. Here we propose a novel approach to particle-size determination by introducing contrast variation-SAXS (CV-SAXS). In CV-SAXS, a multi-component sample is immersed in an inert solvent with a density equal to that of one of the components, thereby rendering that particular component invisible to X-rays. We used a mixture of tetrabromoethane and dimethyl sulfoxide as a contrast-matching solvent for carbon. As a test sample, we prepared a mixture of a small amount of platinum (Pt) catalyst and a bulk of mesoporous carbon, and subjected it to SAXS measurement in the absence and presence of the solvent. In the absence of the solvent, the estimated Pt particle size was affected by the mesopores, but in the presence of the solvent, the Pt particle size was correctly estimated in spite of the low Pt content. The results demonstrate that the CV-SAXS technique is useful for correctly determining the particle-size distribution for low-Pt-content catalysts, for which demands are increasing to reduce the use of expensive Pt.

Platinum nanosheets synthesized via topotactic reduction of single-layer platinum oxide nanosheets for electrocatalysis.

Increasing the performance of Pt-based electrocatalysts for the oxygen reduction reaction (ORR) is essential for the widespread commercialization of polymer electrolyte fuel cells. Here we show the synthesis of double-layer Pt nanosheets with a thickness of 0.5 nm via the topotactic reduction of 0.9 nm-thick single-layer PtOx nanosheets, which are exfoliated from a layered platinic acid (HyPtOx). The ORR activity of the Pt nanosheets is two times greater than that of conventionally used state-of-the-art 3 nm-sized Pt nanoparticles, which is attributed to their large electrochemically active surface area (124 m2 g-1). These Pt nanosheets show excellent potential in reducing the amount of Pt used by enhancing its ORR activity. Our results unveil strategies for designing advanced catalysts that are considerably superior to traditional nanoparticle systems, allowing Pt catalysts to operate at their full potential in areas such as fuel cells, rechargeable metal-air batteries, and fine chemical production.

Morphology Changes in Perfluorosulfonated Ionomer from Thickness and Thermal Treatment Conditions.

The morphological changes of Nafion thin films with thicknesses from 10 to 200 nm on Pt substrate with various annealing histories (unannealed to 240 °C) were systematically investigated using grazing incidence small-angle X-ray scattering (GISAXS) and grazing incidence wide-angle X-ray scattering (GIWAXS). The results revealed that the hydrophilic ionic domain and hydrophobic backbone in Nafion thin films changed significantly when the annealing treatment exceeded the cluster transition temperature, which decreased proton conductivity, due to the constrained hydrophilic/hydrophobic phase separation, and increased the crystalline-rich domain. This research contributed to the understanding of ionomer thermal stability in the catalyst layer, which is subjected to thermal annealing during the hot-pressing process.

High-energy, Long-cycle-life Secondary Battery with Electrochemically Pre-doped Silicon Anode.

Electrochemical pre-doping of a silicon electrode was investigated to create a new class of rechargeable battery with higher energy density. The electrochemical reaction during pre-doping formed a high-quality solid electrolyte interface (SEI) on the surface of silicon particles, which improved the charge and discharge cycle life with a small irreversible capacity. The surface composition of the pre-doped silicon particles was characterized using transmission electron microscopy (TEM), solid state magic-angle-spinning (MAS) nuclear magnetic resonance (NMR) and X-ray diffraction analysis (XRD). Pressurization promoted SEI growth and lithium binding with silicon to form Li15Si4 accompanied by the reductive reaction product of Li2CO3 originated from electrolyte. The Li15Si4 was highly stable when the silicon anode was used in a full cell, thus resulting in a silicon anode with a long cycle life.

Electronic States and Transport Phenomena of Pt Nanoparticle Catalysts Supported on Nb-Doped SnO2 for Polymer Electrolyte Fuel Cells.

Semiconducting oxide nanoparticles are strongly influenced by surface-adsorbed molecules and tend to generate an insulating depletion layer. The interface between a noble metal and a semiconducting oxide constructs a Schottky barrier, interrupting the electron transport. In the case of a Pt catalyst supported on the semiconducting oxide Nb-doped SnO2 with a fused-aggregate network structure (Pt/Nb-SnO2) for polymer electrolyte fuel cells, the electronic conductivity increased abruptly with increasing Pt loading, going from 10-4 to 10-2 S cm-1. The Pt X-ray photoemission spectroscopy (XPS) spectra at low Pt loading amount exhibited higher binding energy than that of pristine Pt metal. The peak shift for the Pt XPS spectra was larger than that of the Pt hard X-ray photoemission spectroscopy (HAXPES) spectra. For all of the spectra, the peaks approached the binding energy of pristine Pt metal with increasing Pt loading. The Sn XPS spectral peak proved the existence of Sn metal with increasing Pt loading, and the peak intensity was larger than that for HAXPES. These spectroscopic results, together with the scanning transmission electron microscopy with energy dispersive X-ray spectroscopy (STEM-EDX) spectra, proved that a PtSn alloy was deposited at the interface between Pt and Nb-SnO2 as a result of the sintering procedure under dilute hydrogen atmosphere. Both Nb spectra indicated that the oxidation state of Nb was +5 and thus that the Nb cation acts as an n-type dopant of SnO2. We conclude that the PtSn alloy at the interface between Pt and Nb-SnO2 relieved the effect of the Schottky barrier, enhanced the carrier donation from Pt to Nb-SnO2, and improved the electronic transport phenomena of Pt/Nb-SnO2.

Enantioselective Effect of Flurbiprofen on Lithium Disposition in Rats.

AIMS: Lithium is administered for treating bipolar disorders and is mainly excreted into urine. Nonsteroidal anti-inflammatory drugs inhibit this process. In this study, we examined the enantioselective effect of flurbiprofen on the disposition of lithium in rats. METHODS: Pharmacokinetic experiments with lithium were performed. RESULTS: Until 60 min after the intravenous administration of lithium chloride at 30 mg/kg as a bolus, 17.8% of lithium injected was recovered into the urine. Its renal clearance was calculated to be 1.62 mL/min/kg. Neither creatinine clearance (Ccr) nor pharmacokinetics of lithium was affected by the simultaneous injection of (R)-flurbiprofen at 20 mg/kg. (S)-flurbiprofen impaired the renal function and interfered with the urinary excretion of lithium. The ratio of renal clearance of lithium to Ccr was decreased by the (S)-enantiomer. CONCLUSION: This study clarified that the (S)-flurbiprofen but not (R)-flurbiprofen inhibited the renal excretion of lithium in rats.

Influence of genetic factors on the ephedrine alkaloid composition ratio of Ephedra plants.

We investigated the ephedrine alkaloid [(-)-ephedrine and (+)-pseudoephedrine] composition ratio of a crude Chinese herbal drug described in the Japanese Pharmacopoeia 'Ephedra herb (Chinese name: Mahuang)'. There were marked changes in the alkaloid composition ratio of wild plants in areas where both male and female clusters coexisted. However, in genetically homogeneous areas with the growth of male or female clusters alone, all of the coefficients of the regression lines were positive, but each gradient varied. This suggests that the alkaloid composition ratio has a clear tendency in each individual. Based on this, we cultivated individuals for vegetative propagation, and evaluated the alkaloid content ratio. Those propagated by separating the roots showed a specific tendency regardless of the cultivation area (Wakayama, Tanegashima). Those propagated by separating the herbaceous stem showed a specific tendency regardless of the soil or harvest time. In addition, we surveyed the (-)-ephedrine content ratio of 3- to 6-year-old strains. There was a high positive correlation coefficient between the previous and subsequent years. These findings suggest that the ephedrine alkaloid composition ratio of Ephedra herb depends on genetic factors, but not on environmental factors or the growth period.

Growth limits in platinum oxides formed on Pt-skin layers on Pt-Co bimetallic nanoparticles.

The dynamical oxidation processes of Pt-skin layers on Pt(3)Co were investigated in situ and in real-time by time-resolved X-ray absorption spectroscopy combined with electrochemical measurements. Growth limit behaviors and the suppression of higher-order formation of surface oxides were observed, and these might explain the highly durable nature of Pt-skin layers.

In situ and real-time monitoring of oxide growth in a few monolayers at surfaces of platinum nanoparticles in aqueous media.

The electrochemical oxidation behaviors of the surfaces of platinum nanoparticles, one of the key phenomena in fuel cell developments, were investigated in situ and in real time, via time-resolved hard X-ray diffraction and energy dispersive X-ray absorption spectroscopy. Combining two complementary structural analyses, dynamical and inhomogenous structural changes occurring at the surfaces of nanoparticles were monitored on an atomic level with a time resolution of less than 1 s. After oxidation at 1.4 V vs RHE (reversible hydrogen electrode) in a 0.5 M H(2)SO(4) solution, longer Pt-O bonds (2.2-2.3 A that can be assigned to OHH and/or OH species) were first formed on the surface through the partial oxidation of water molecules. Next, these species turned to shorter Pt-O bonds (2.0 A, adsorbed atomic oxygen), and atomic oxygen was incorporated into the inner part of the nanoparticles, forming an initial monolayer oxide that had alpha-PtO(2)-like local structures with expanded Pt-Pt bonds (3.1 A). Finally, quasi-three-dimensional oxides with longer Pt-(O)-Pt bonds (3.5 A, precursor for beta-PtO(2)) grew on the surface, at almost 100 s after oxidation. Despite the very complex oxidation mechanism on the atomic level, XANES analysis indicated that the charge transfer from platinum to the adsorbed oxygen species was almost constant and rather small, that is, about 0.5 electrons per oxygen, up to two monolayers of oxygen. This means that ionic polarization hardly develops at this stage of the surface platinum's "oxide" growth.

Direct and short-time uptake of [70]fullerene into the cell membrane using an exchange reaction from a [70]fullerene-gamma-cyclodextrin complex and the resulting photodynamic activity.

[70]Fullerene (C70) was directly incorporated into the cell membrane using an exchange reaction from a C70-gamma-cyclodextrin (gamma-CDx) complex within 10 min and the incorporated C70 acted as a photodynamic sensitiser for a cancer cell.

Photodynamic activity of C70 caged within surface-cross-linked liposomes.

[70]Fullerene (C(70)) encapsulated into a surface-cross-linked liposome, a so-called cerasome, was prepared by an exchange reaction incorporating C(70)gamma-cyclodextrin complexes into lipid membranes. Fullerene exchange in a cerasome-incorporated C(70) (CIC(70)), as well as in a lipid-membrane-incorporated C(70) (LMIC(70)), was completed within 1 min with stirring at 25 degrees C. CIC(70) was more resistant to lysis than LMIC(70) towards lysing agents such as surfactants. Furthermore, the photodynamic activity of CIC(70) in HeLa cells was similar to that of LMIC(70), indicating that C(70) can act as a photosensitizing drug (PS) without release from cerasome membranes. Thus, in contrast with general drug-delivery systems (DDSs), which require the drug to be released from the interior of liposomes, carriers for PSs for use in photodynamic therapy (PDT) do not necessarily need to release the drug. These results indicate that DDSs with high morphological stability can increase the residence time in blood and achieves tumor-selective drug delivery by the enhanced permeability and retention (EPR) effect.

Development of voice navigation system for the visually impaired by using IC tags.

There are about 300,000 visually impaired persons in Japan. Most of them are old persons and, cannot become skillful in using a white cane, even if they make effort to learn how to use a white cane. Therefore, some guiding system that supports the independent activities of the visually impaired are required. In this paper, we will describe about a developed white cane system that supports the independent walking of the visually impaired in the indoor space. This system is composed of colored navigation lines that include IC tags and an intelligent white cane that has a navigation computer. In our system colored navigation lines that are put on the floor of the target space from the start point to the destination and IC tags that are set at the landmark point are used for indication of the route to the destination. The white cane has a color sensor, an IC tag transceiver and a computer system that includes a voice processor. This white cane senses the navigation line that has target color by a color sensor. When a color sensor finds the target color, the white cane informs a white cane user that he/she is on the navigation line by vibration. So, only following this vibration, the user can reach the destination. However, at some landmark points, guidance is necessary. At these points, an IC tag is set under the navigation line. The cane makes communication with the tag and informs the user about the land mark pint by pre recorded voice. Ten normal subjects who were blindfolded were tested with our developed system. All of them could walk along navigation line. And the IC tag information system worked well. Therefore, we have concluded that our system will be a very valuable one to support activities of the visually impaired.

Novel and orally bioavailable inducible nitric oxide synthase inhibitors: synthesis and evaluation of optically active 4,5-dialkyl-2-iminoselenazolidine derivatives.

We have previously reported that (4R,5R)-5-ethyl-2-imino-4-methylthiazolidine (3) strongly inhibits inducible nitric oxide synthase (iNOS). In a successive search for strong and selective iNOS inhibitors, we, herein, describe the synthesis of the selenium analogue of 3 (4: ES-2133) and its related optically active compounds and examine their in vitro and in vivo inhibitory activity against iNOS. In addition, an alternative synthetic method to the selected compound 4 and its pharmacokinetic profile is also reported.

4,5-dialkylsubstituted 2-imino-1,3-thiazolidine derivatives as potent inducible nitric oxide synthase inhibitors.

In the course of our search for selective iNOS inhibitors, we have previously reported that 2-imino-1,3-oxazolidine derivatives (1) and 2-aminothiazole derivatives (2) are selective iNOS inhibitors. In order to find more potent iNOS inhibitors, we focused our efforts on the synthesis and evaluation of the inhibitory activity against iNOS and selectivity for iNOS both in vitro and in vivo of a series of 2-imino-1,3-thiazolidine derivatives (3), which are analogues of 1 and 2. Our results show that among the compounds synthesized (4R,5R)-5-ethyl-2-imino-4-methyl-1,3-thiazolidine [(4R,5R)-14a: ES-1537] exhibited potent inhibitory activity and selectivity for iNOS. In addition, ES-1537 had good pharmacokinetic profile in rats with BA value of 80%. It is therefore expected that ES-1537 may be therapeutically useful for the treatment of diseases related to excess production of NO.

Adlayers of C60-C60 and C60-C70 fullerene dimers formed on au(111) in benzene solutions studied by STM and LEED.

Scanning tunneling microscopy (STM) and low-energy electron diffraction were used to reveal the structures of ordered adlayers of [2+2]-type C60-C60 fullerene dimer (C120) and C60-C70 cross-dimer (C130) formed on Au(111) by immersingit in abenzene solution containing C120 or C130 molecules. High-resolution STM images clearly showed the packing arrangements and the electronic structures of C120 and C130 on the Au(111) surface in ultrahigh vacuum. The (2 square root3 x 4square root3)R30 degrees, (2square root3 x 5square root3)R30 degrees, and (7 x 7) structures were found for the C120 adlayer on the Au(111) surface, whereas C130 molecules were closely packed on the surface. Each C60 or C70 monomer cage was discerned in the STM image of a C130 molecule.

4,5-Disubstituted-1,3-oxazolidin-2-imine derivatives: a new class of orally bioavailable nitric oxide synthase inhibitor.

In our search for a novel class of inducible nitric oxide synthase (iNOS) inhibitors, 1,3-oxazolidin-2-imine was found to weakly inhibit iNOS. Further modifications of this compound resulted in a remarkable increase in both the in vivo and in vitro inhibitory activity and selectivity for iNOS.