Association of defects of enamel with polymorphisms in the vitamin D receptor and parathyroid hormone genes.

This cross-sectional study aimed to investigate the association between developmental defects of enamel (DDE) and single nucleotide polymorphisms (SNPs) in the genes encoding the vitamin D receptor (VDR) and parathyroid hormone (PTH). Orthodontic patients receiving treatment at a dental school were selected through convenience sampling. Intra-oral photographs were used to assess DDE, which were classified according to the criteria proposed by Ghanim et al. (2015) by a single calibrated examiner (Kappa>0.80). Enamel hypoplasia, molar-incisor hypomineralization (MIH), hypomimineralized second primary molar (HSPM), and non-MIH/HSPM demarcated opacities were considered for the analysis. Genomic DNA was extracted from buccal cells. The SNPs in VDR (rs7975232) and PHT (rs694, rs6256, and rs307247) were genotyped using real-time polymerase chain reactions (PCR). Statistical analyses were performed using the PLINK software (version 1.03, designed by Shaun Purcell, EUA). Chi-square or Fisher's exact tests were performed at a significance level of 5%. Ninety-one (n=91) patients (49 females and 42 males) (mean age of 14.1±5.8 years) were included. The frequency of DDE was 38.5% (35 patients). Genotype distributions were in Hardy-Weinberg equilibrium. No significant statistical association was found between DDE and the SNPs evaluated. A borderline association (p=0.09) was observed between DDE and the CC haplotype for SNP rs7975232 in VDR. In conclusion, the selected SNPs in VDR and PTH genes were not associated with DDE in the studied samples.

Single Nucleotide Polymorphisms in RUNX2 and BMP2 contributes to different vertical facial profile.

The vertical facial profile is a crucial factor for facial harmony with significant implications for both aesthetic satisfaction and orthodontic treatment planning. However, the role of single nucleotide polymorphisms (SNPs) in the development of vertical facial proportions is still poorly understood. This study aimed to investigate the potential impact of some SNPs in genes associated with craniofacial bone development on the establishment of different vertical facial profiles. Vertical facial profiles were assessed by two senior orthodontists through pre-treatment digital lateral cephalograms. The vertical facial profile type was determined by recommended measurement according to the American Board of Orthodontics. Healthy orthodontic patients were divided into the following groups: "Normodivergent" (control group), "Hyperdivergent" and "Hypodivergent". Patients with a history of orthodontic or facial surgical intervention were excluded. Genomic DNA extracted from saliva samples was used for the genotyping of 7 SNPs in RUNX2, BMP2, BMP4 and SMAD6 genes using real-time polymerase chain reactions (PCR). The genotype distribution between groups was evaluated by uni- and multivariate analysis adjusted by age (alpha = 5%). A total of 272 patients were included, 158 (58.1%) were "Normodivergent", 68 (25.0%) were "Hyperdivergent", and 46 (16.9%) were "Hypodivergent". The SNPs rs1200425 (RUNX2) and rs1005464 (BMP2) were associated with a hyperdivergent vertical profile in uni- and multivariate analysis (p-value < 0.05). Synergistic effect was observed when evaluating both SNPs rs1200425- rs1005464 simultaneously (Prevalence Ratio = 4.0; 95% Confidence Interval = 1.2-13.4; p-value = 0.022). In conclusion, this study supports a link between genetic factors and the establishment of vertical facial profiles. SNPs in RUNX2 and BMP2 genes were identified as potential contributors to hyperdivergent facial profiles.

Insertion torque, flexural strength and surface alterations of stainless steel and titanium alloy orthodontic mini-implants: an in vitro study.

OBJECTIVE: This study aimed to compare the insertion torque (IT), flexural strength (FS) and surface alterations between stainless steel (SS-MIs) and titanium alloy (Ti-MIs) orthodontic mini-implants. METHODS: Twenty-four MIs (2 x 10 mm; SS-MIs, n = 12; Ti-MIs, n = 12) were inserted on artificial bone blocks of 20 lb/ft3 (20 PCF) and 40 lb/ft3 (40 PCF) density. The maximum IT was recorded using a digital torque meter. FS was evaluated at 2, 3 and 4 mm-deflection. Surface topography and chemical composition of MIs were assessed by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). General linear and mixed models were used to assess the effect of the MI type, bone density and deflection on the evaluated outcomes. RESULTS: The IT of Ti-MIs was 1.1 Ncm greater than that obtained for the SS-MIs (p= 0.018). The IT for MIs inserted in 40 PCF test blocks was 5.4 Ncm greater than that for those inserted in 20 PCF test blocks (p < 0.001). SS-MIs inserted in higher density bone (40 PCF) had significantly higher flexural strength than the other groups, at 2 mm (98.7 ± 5.1 Ncm), 3 mm (112.0 ± 3.9 Ncm) and 4 mm (120.0 ± 3.4 Ncm) of deflection (p< 0.001). SEM evidenced fractures in the Ti-MIs. EDS revealed incorporation of 18% of C and 2.06% of O in the loaded SS-MIs, and 3.91% of C in the loaded Ti-MIs. CONCLUSIONS: Based on the findings of this in vitro study, it seems that SS-MIs offer sufficient stability and exhibit greater mechanical strength, compared to Ti-MIs when inserted into higher density bone.

Mandibular and dental measurements for sex determination using machine learning.

The present study tested the combination of mandibular and dental dimensions for sex determination using machine learning. Lateral cephalograms and dental casts were used to obtain mandibular and mesio-distal permanent teeth dimensions, respectively. Univariate statistics was used for variables selection for the supervised machine learning model (alpha = 0.05). The following algorithms were trained: logistic regression, gradient boosting classifier, k-nearest neighbors, support vector machine, multilayer perceptron classifier, decision tree, and random forest classifier. A threefold cross-validation approach was adopted to validate each model. The areas under the curve (AUC) were computed, and ROC curves were constructed. Three mandibular-related measurements and eight dental size-related dimensions were used to train the machine learning models using data from 108 individuals. The mandibular ramus height and the lower first molar mesio-distal size exhibited the greatest predictive capability in most of the evaluated models. The accuracy of the models varied from 0.64 to 0.74 in the cross-validation stage, and from 0.58 to 0.79 when testing the data. The logistic regression model exhibited the highest performance (AUC = 0.84). Despite the limitations of this study, the results seem to show that the integration of mandibular and dental dimensions for sex prediction would be a promising approach, emphasizing the potential of machine learning techniques as valuable tools for this purpose.

BMP2 rs1005464 is associated with mandibular condyle size variation.

This study aimed to evaluate the association between single nucleotide polymorphisms (SNPs) in endochondral development-related genes and mandibular condyle shape, size, volume, and symmetry traits. Cone-beam Computed Tomographies and genomic DNA from 118 individuals were evaluated (age range: 15-66 years). Data from twelve 3D landmarks on mandibular condyles were submitted to morphometric analyses including Procrustes fit, principal component analysis, and estimation of centroid sizes and fluctuating asymmetry scores. Condylar volumes were additionally measured. Seven SNPs across BMP2, BMP4, RUNX2 and SMAD6 were genotyped. Linear models were fit to evaluate the effect of the SNPs on the mandibular condyles' quantitative traits. Only the association between BMP2 rs1005464 and centroid size remained significant after adjusting to account for the false discovery rate due to multiple testing. Individuals carrying at least one A allele for this SNP showed larger condylar size than common homozygotes GG (ß = 0.043; 95% CI: 0.014-0.071; P value = 0.028). The model including BMP2 rs1005464, age and sex of the participants explained 17% of the variation in condylar size. Shape, volume, and symmetry were not associated with the evaluated SNPs. These results suggest that BMP2 rs1005464 might be associated with variation in the mandibular condyles size.

Calcification patterns and morphology of Sella turcica are related to anteroposterior skeletal malocclusions: A cross-sectional study.

BACKGROUND: The sphenoid bone is an irregular, unpaired, symmetrical bone located in the middle of the anterior skull and is involved in craniofacial growth and development. Since the morphology of Sella turcica (ST) is associated with different craniofacial patterns, this study aimed to investigate if there is a correlation between ST morphology on the one hand and sagittal craniofacial patterns on the other hand. METHODS: This study was conducted with a convenience sample that included Brazilian individuals undergoing orthodontic treatment. Lateral cephalograms were used to evaluate the calcification pattern and morphology of ST, as well as skeletal class by analyzing the ANB angle. Pearson's chi-square test with Bonferroni post-hoc test was performed to evaluate the association between ST calcification pattern and morphology, and anteroposterior skeletal malocclusion. The established significance level was 0.05. RESULTS: The study collective was comprised of 305 orthodontic patients (178 (58.4 %) female, 127 (41.6 %) male), who had a mean age of 23.2 (±10.6) years. 131 participants (42.9 %) presented skeletal class I, 142 (46.6%) skeletal Class II, and 32 (10.5%) had a skeletal class III. The degree of prognathism of the mandible showed a homogenous distribution within the study collective (91 (29.9 %) orthognathic, 100 (32.9 %) retrognathic, 113 (37.2 %) prognathic mandible). Concerning the maxilla, 92 (30.2%) individuals presented an orthognathic upper jaw, whereas 60 (19.7%) showed maxillary retrognathism and 153 (50.2%) maxillary prognathism. Compared to patients with skeletal class I, skeletal class III individuals presented significantly more hypertrophic posterior clinoid process (p<0.007) and pyramidal shape of the dorsum of the ST (p<0.038). CONCLUSIONS: Our results suggest that the hypertrophic posterior clinoid process and pyramidal shape of the ST dorsum are more prevalent in individuals with skeletal class III malocclusion.

Microbial contamination profile on esthetic elastomeric ligatures through the checkerboard DNA-DNA hybridization technique : A randomized split-mouth study.

OBJECTIVE: The aim of this study is to assess the microbial contamination of three different brands of esthetic elastomeric ligatures. MATERIALS AND METHODS: Different brands of esthetic ligatures (Unistick Pearl [American Orthodontics, Sheboygan, WI, USA], Power Sticks Pearl [Ortho Technology, Tampa, FL, USA], and Ease [Obscure, 3M Unitek, Monrovia, CA, USA]) were randomly assigned to permanent canines of 25 patients (aged 11-18 years) undergoing corrective orthodontic treatment. After 30 days, the ligatures were removed, processed, and the biofilm composition was analyzed by checkerboard DNA-DNA hybridization for 40 bacterial species. The microbiological data were analyzed using a nonparametric mixed model. RESULTS: The ligatures presented intense microbial contamination after 30 days, but no statistically significant differences were observed among the three groups (p > 0.05). The levels of the evaluated individual species and proportions of the microbial complexes showed no statistically significant differences among the ligature groups (p > 0.05). CONCLUSIONS: Esthetic elastomeric ligatures became multicolonized by several bacterial species after 30 days of exposure to the oral cavity. However, no relevant differences were observed among the biofilm composition formed on the different ligature brands.

Insertion torque, flexural strength and surface alterations of stainless steel and titanium alloy orthodontic mini-implants: an in vitro study

ABSTRACT Objective: This study aimed to compare the insertion torque (IT), flexural strength (FS) and surface alterations between stainless steel (SS-MIs) and titanium alloy (Ti-MIs) orthodontic mini-implants. Methods: Twenty-four MIs (2 x 10 mm; SS-MIs, n = 12; Ti-MIs, n = 12) were inserted on artificial bone blocks of 20 lb/ft3 (20 PCF) and 40 lb/ft3 (40 PCF) density. The maximum IT was recorded using a digital torque meter. FS was evaluated at 2, 3 and 4 mm-deflection. Surface topography and chemical composition of MIs were assessed by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). General linear and mixed models were used to assess the effect of the MI type, bone density and deflection on the evaluated outcomes. Results: The IT of Ti-MIs was 1.1 Ncm greater than that obtained for the SS-MIs (p= 0.018). The IT for MIs inserted in 40 PCF test blocks was 5.4 Ncm greater than that for those inserted in 20 PCF test blocks (p < 0.001). SS-MIs inserted in higher density bone (40 PCF) had significantly higher flexural strength than the other groups, at 2 mm (98.7 ± 5.1 Ncm), 3 mm (112.0 ± 3.9 Ncm) and 4 mm (120.0 ± 3.4 Ncm) of deflection (p< 0.001). SEM evidenced fractures in the Ti-MIs. EDS revealed incorporation of 18% of C and 2.06% of O in the loaded SS-MIs, and 3.91% of C in the loaded Ti-MIs. Conclusions: Based on the findings of this in vitro study, it seems that SS-MIs offer sufficient stability and exhibit greater mechanical strength, compared to Ti-MIs when inserted into higher density bone.

RESUMO Objetivo: O objetivo deste estudo foi comparar o torque de inserção (TI), a resistência flexural (RF) e as alterações de superfície em mini-implantes ortodônticos de aço inoxidável (MIs-Ai) e de liga de titânio (MIs-Ti). Métodos: Vinte e quatro MIs (2 x 10 mm; MIs-Ai, n = 12; MIs-Ti, n = 12) foram inseridos em blocos de osso artificial de densidades de 20 lb/ft3 (20 PCF) e 40 lb/ft3 (40 PCF). O torque máximo de inserção foi registrado por meio de um torquímetro digital. A resistência flexural foi avaliada nas deflexões de 2, 3 e 4 mm. Topografia de superfície e composição química dos MIs foram avaliadas por Microscopia Eletrônica de Varredura (MEV) e Espectroscopia de Energia Dispersiva de Raios X (EDS). Modelos lineares gerais e mistos foram utilizados para avaliar o efeito do tipo de MI, da densidade óssea e da deflexão nos desfechos avaliados. Resultados: O TI dos MIs-Ti foi 1,1 Ncm maior do que o obtido para os MIs-Ai (P = 0,018). O TI para MIs inseridos em blocos de teste de 40 PCF foi 5,4 Ncm maior do que para aqueles inseridos em blocos de teste 20 PCF (p < 0,001). MIs-Ai inseridos em osso de maior densidade (40 PCF) apresentaram resistência flexural significativamente maior do que outros grupos, em deflexões de 2 mm (98,7 ± 5,1 Ncm), 3 mm (112,0 ± 3,9 Ncm) e 4 mm (120,0 ± 3,4 Ncm) (p < 0,001). A MEV evidenciou fraturas nos MIs-Ti. A EDS revelou incorporação de 18% de C e 2,06% de O nos MIs-Ai e 3,91% de C nos MIs-Ti, ambos submetidos a testes mecânicos. Conclusões: Com base nos resultados desse estudo in vitro, os MIs-Ai aparentam oferecer adequada estabilidade e maior resistência mecânica, em comparação aos MIs-Ti, quando inseridos em osso de maior densidade.

Investigating the association between dental age and polymorphisms in genes encoding estrogen receptors.

BACKGROUND: Genetic polymorphisms have been shown to influence several physiological traits, including dental and craniofacial characteristics. Understanding the clinical relevance of genetic polymorphisms in dental practice is crucial to personalize treatment plans and improve treatment outcomes. OBJECTIVE: to evaluate the association between dental age and genetic polymorphisms in genes encoding estrogen receptors alpha and beta (ESR1 and ESR2, respectively) in a sample of Brazilian children. METHODOLOGY: This retrospective cross-sectional study was performed with children undergoing orthodontic treatment. Patients with syndromes, congenital anomalies, craniofacial deformities, under hormonal or systemic treatment, and with a previous history of facial trauma were excluded. Panoramic radiographs were used to assess dental age according to the Demirjian, Goldstein, and Tanner method. A delta [dental age-chronological age (DA-CA)] was obtained, which shows whether the patient tends to have a normal, delayed (negative values), or advanced (positive values) dental age. DNA isolated from buccal cells was used to genotype four genetic polymorphisms: rs9340799 (A>G) and rs2234693 (C>T), located in ESR1; and rs1256049 (C>T) and rs4986938 (C>T), located in ESR2. A statistical analysis was performed and values of p<0.05 indicated statistical difference. RESULTS: A total of 79 patients were included, 44 (55.70%) girls and 35 (44.30%) boys. The Demirjian, Goldstein, and Tanner method, in general, overestimated patients' age by 0.75 years. There was no difference in the delta of dental age between the sexes (p>0.05). Genetic polymorphisms in ESR1 and ESR2 were not associated with dental age (p>0.05). CONCLUSION: The studied genetic polymorphisms in ESR1 and ESR2 were not associated with dental age in Brazilian children.

Effect of chlorhexidine mouthwashes on periodontal parameters and extrinsic tooth staining in orthodontic patients.

INTRODUCTION: Periodontal health and biofilm control are primordial to success in orthodontic treatment. This study aimed to evaluate the effect of chlorhexidine (CHX) mouthwashes on periodontal status and extrinsic tooth staining in orthodontic patients. METHODS: Thirty-three patients of both sexes, aged 11-33 years, under orthodontic treatment with fixed appliances at <16 months, were randomly distributed into 2 groups. In the control group, patients received mechanical hygiene instruction, and in the experimental group, patients also used CHX wash twice a week for 60 days. The effectivity of the protocols was evaluated using the plaque, gingival, gingival bleeding, and discoloration indexes before the hygiene protocol was applied, 15, 30, and 60 days after protocol implementation. RESULTS: In the experimental group, there was a decrease in the plaque, gingival, and gingival bleeding indexes at the different evaluation periods (P <0.05). In addition, there was a significant difference in the discoloration index at 60 days compared with initial time points after implementing hygiene protocols in the experimental group (P <0.05). In contrast, there were no significant differences in plaque, gingival, gingival bleeding, and discoloration indexes in the control group at any time (P >0.05). CONCLUSIONS: CHX mouthwash administered 30 days, twice a week, significantly improved the periodontal status with mild brown staining. After this period, expressive extrinsic tooth staining was observed.

Maxillary alveolar bone evaluation following dentoalveolar expansion with clear aligners in adults: A cone-beam computed tomography study.

Objective: To investigate the effects of maxillary orthodontic expansion on the alveolar bone tissue in adult patients treated with aligners by using cone-beam computed tomography. Methods: Thirty patients (22 females and 8 males; mean age: 36.3 years) were treated with Invisalign® aligners. Cone-beam computed tomography and digital models were obtained before (T0) and after (T1) upper arch expansion. The bone thicknesses in the cervical, middle, and apical areas of the incisors, canines, premolar, and first molars were buccally and palatally measured, totaling 96 areas and 2,880 measurements. The buccolingual inclinations and transverse measurements of the teeth were obtained from digital models to correlate them with the bone changes. The statistical tests used were Student's t-test, analysis of variance, and Pearson's correlation tests (p < 0.05). Results: From the 96 areas evaluated, 84 revealed an increase or stability in the alveolar bone thickness and twelve displayed significant bone loss. Bone changes did not correlate with the tooth inclination and transverse measurements. Conclusions: Within the limitation of the present study, mild levels of upper arch expansion obtained with Invisalign® aligners in adult patients did not result in any clinically significant loss of alveolar bone thickness.

Impact of genetic variations in the WNT family members and RUNX2 on dental and skeletal maturation: a cross-sectional study.

BACKGROUND: This study evaluated if genetic variations in the WNT family members and RUNX2 are associated with craniofacial maturation, investigating dental and skeletal maturity in children and teenagers. METHODS: Radiographs from pre-orthodontic treatment of Brazilian patients (7 to 17 years-old) were used to assess dental (panoramic radiographs) and skeletal maturity (cephalometric radiographs). The chronological age (CA) was calculated based on the date of birth and the time the radiographs were performed. For the dental maturity analysis, the Demirjian (1973) method was used and a delta [dental age - chronological age (DA-CA)] was calculated. For the skeletal maturity analysis, the Baccetti et al. (2005) method was used and the patients were classified as "delayed skeletal maturation", "advanced skeletal maturation" or "normal skeletal maturation". DNA isolated from buccal cells was used for genotyping of two genetic variations in WNT family genes: rs708111 (G > A) in WNT3A and rs1533767 (G > A) in WNT11; and two genetic variations in RUNX2: rs1200425 (G > A) and rs59983488 (G > T). A statistical analysis was performed and values of p < 0.05 indicated a significant difference. RESULTS: There were no associations between dental maturity and genotypes (p > 0.05). In the skeletal maturity analysis, the allele A in the rs708111 (WNT3A) was statistically more frequent in patients with delayed skeletal maturation (Prevalence Ratio = 1.6; 95% Confidence Interval = 1.00 to 2.54; p-value = 0.042). CONCLUSIONS: The rs708111 in the WNT3A gene impacts on skeletal maturation.

Orthodontic treatment of children with anterior open bite and posterior crossbite: An analysis of the stomatognathic system.

Dental malocclusions are deviations from normalities due to the inadequate growth and development of the dental arch which provides functional changes to the stomatognathic system. The aim of this longitudinal study was to evaluate the electromyographic activity (EMG) the masseter and temporalis muscles, strength of the orofacial tissues and occlusal force of children with anterior open bite (n = 15) and posterior crossbite (n = 20), 7 days after the removal of the orthodontic apparatus. A fixed horizontal palatal crib was used in the treatment of anterior open bite and the fixed appliances Hyrax or MacNamara was used in the treatment of posterior crossbite. EMG of the masticatory muscles was recorded using an electromyograph with wireless sensors during mandibular tasks. Habitual chewing was assessed using the integral of the linear envelope of the electromyographic signal in the masticatory cycles. The strength of the tongue and facial muscles was measured using the Iowa Oral Pressure Instrument. T-Scan was used to analyze the force of occlusal contact. Molar bite force was measured by digital dynamometer. Significant differences (p < 0.05) were found in the EMG data of the masseter and temporalis muscles in the static and dynamic mandibular tasks. There were no significant difference in strength of orofacial tissues, occlusal contact force and molar bite force 7 days after the removal of the orthodontic apparatus. The results of this study suggest that the orthodontic treatment of anterior open bite and posterior crossbite in children promoted functional alteration in the electromyographic activity of masseter and temporalis muscles.

Testosterone suppression impacts craniofacial growth structures during puberty : An animal study.

AIM: Hormones play a crucial role in growth development; however, the impact of testosterone suppression (TS) on craniofacial growth during puberty remains inconclusive. This study aimed to evaluate the impact of TS during puberty on cephalometric measurements and histological characteristics of facial growth centers. MATERIALS AND METHODS: Thirty-six heterogenic Wistar male rats were randomly allocated into experimental orchiectomy (ORX) and control (sham) groups. At an age of 23 days (prepubertal stage), orchiectomy and placebo surgery were performed. Cephalometric measurements were performed via lateral cephalograms during and after puberty. The animals were euthanized at an age of 45 days (pubertal stage) and 73 days (postpubertal stage). Histological slices of the growth centers (condyle, premaxilla, and median palatine suture) were stained with hematoxylin and eosin, and sirius red. Student's t or Mann-Whitney U tests were used to compare linear and angular cephalometric measurements across groups (α error = 5%). RESULTS: Linear and angular measurements were statistically different in ORX animals (cranial bones, maxilla, and mandible) at 45 days and 73 days. Condylar histology showed a decrease in prechondroblast differentiation and a delay of mineralization in ORX animals. Vascularization of the medium palatine suture was lower in the ORX group at 45 days. Type I and III collagen fiber synthesis was lower in the ORX groups. In the premaxillary suture, collagen fibers were better organized in the sham groups. CONCLUSIONS: Our results suggest that testosterone suppression affects craniofacial growth during puberty.

Orthodontic pain: c-Fos expression in rat brain nuclei after rapid maxillary expansion.

BACKGROUND: The aim of this in vivo study was to quantitatively evaluate pain after rapid maxillary expansion (RME) in young rats by analyzing the activation of nociception-related structures, that is, the caudalis, interpolaris, and oralis subnuclei, according to the Fos expression. METHODS: A total of 65 Wistar rats were assigned to three groups: control group (n = 15) with no treatment, positive control group (n = 25), and experimental group (n = 25) with RME. The experimental animals were euthanized at 6, 12, 24, 48, and 72 hours after RME, and the brain was later carefully collected. Coronal sections through the spinal trigeminal caudalis, spinal trigeminal interpolaris, and spinal trigeminal oralis were cut (thickness of 40 µm) on a cryostat and processed for Fos immunohistochemistry. Images from the sections were captured under light microscopy, and ImageJ software was used to count Fos-like immunoreactive neurons. The Analysis of variance (ANOVA) and Tukey test were used for statistical analysis, and the significance level was set at 5%. RESULTS: RME induced incisor distalization and opening of the midpalatal suture, as well as neuronal activation of the spinal trigeminal nucleus. The experimental group demonstrated significantly more Fos-positive neurons in subnuclei caudalis and subnuclei interpolaris 6 hours after the maxillary expansion. The Fos immunoreactivity significantly decreased at 12 hours and increased again at 24 and 48 hours (P < 0.001). CONCLUSIONS: The RME increases the neural activation of brain regions involved in the nociception region, as determined by the Fos expression. The most intense Fos-like immunoreactive expression was detected in the brain 6 hours after the start of the palatal expansion.

Investigating the association between dental age and polymorphisms in genes encoding estrogen receptors

Abstract Background Genetic polymorphisms have been shown to influence several physiological traits, including dental and craniofacial characteristics. Understanding the clinical relevance of genetic polymorphisms in dental practice is crucial to personalize treatment plans and improve treatment outcomes. Objective to evaluate the association between dental age and genetic polymorphisms in genes encoding estrogen receptors alpha and beta (ESR1 and ESR2, respectively) in a sample of Brazilian children. Methodology This retrospective cross-sectional study was performed with children undergoing orthodontic treatment. Patients with syndromes, congenital anomalies, craniofacial deformities, under hormonal or systemic treatment, and with a previous history of facial trauma were excluded. Panoramic radiographs were used to assess dental age according to the Demirjian, Goldstein, and Tanner method. A delta [dental age-chronological age (DA-CA)] was obtained, which shows whether the patient tends to have a normal, delayed (negative values), or advanced (positive values) dental age. DNA isolated from buccal cells was used to genotype four genetic polymorphisms: rs9340799 (A>G) and rs2234693 (C>T), located in ESR1; and rs1256049 (C>T) and rs4986938 (C>T), located in ESR2. A statistical analysis was performed and values of p<0.05 indicated statistical difference. Results A total of 79 patients were included, 44 (55.70%) girls and 35 (44.30%) boys. The Demirjian, Goldstein, and Tanner method, in general, overestimated patients' age by 0.75 years. There was no difference in the delta of dental age between the sexes (p>0.05). Genetic polymorphisms in ESR1 and ESR2 were not associated with dental age (p>0.05). Conclusion The studied genetic polymorphisms in ESR1 and ESR2 were not associated with dental age in Brazilian children.

Oral Cleft Related-Genes may be Involved in Root Curvature of Maxillary Lateral Incisors.

The maxilla is formed by the medial nasal and maxillary processes fusion. The dental lamina develops from 2 origins connecting in the lateral incisor. The maxillary lateral incisor region is often affected by dental anomalies and clefting. It is possible that genes involved in oral cleft could also be associated with a variety of phenotypic variations in the maxillary lateral incisor. In this phenotype-genotype study, we explored the association between polymorphisms in the oral-cleft-related genes BMP2 and BMP4 and root curvature of maxillary lateral incisors.Cross-sectional study.Universities and private clinics.Panoramic radiographs and DNA from 231 patients were analyzed.Schneider method (1971) was applied to estimate the degree of root curvature of the maxillary lateral incisors and to classify the root as straight (5° or less) or curved (higher than 5°). Genetic polymorphisms in BMP2 (rs235768 and rs1005464) and BMP4 (rs17563) were genotyped. Statistical analysis was performed.A total of 401 teeth (199 left and 202 right) were evaluated. Genetic analysis demonstrated trends toward association for the rs1005464 in BMP2 (P = .025) in co-dominant model and in dominant model (P = .026) for left incisors. The rs235768 in BMP2 showed trends toward association with the degree of root curvature in left incisors in the recessive model (P = .031). rs17563 in BMP4 also showed trends toward association with the degree of the root curvature in left incisors (P = .019).BMP2 (rs235768 and rs1005464) and BMP4 (rs17563) might be involved in maxillary lateral incisor root curvature.

Assessing the prevalence of S-shaped root canal and associated genes in humans.

BACKGROUND: Multiple signaling molecules have been shown to play crucial roles in dental root development. Therefore, we aimed to investigate the prevalence of S-shaped roots and also to investigate, if single nucleotide polymorphisms (SNPs) in BMP2, BMP4 and SMAD6 are associated with this phenotype in humans. METHODS: This is a cross-sectional phenotype-genotype association study that used radiographs to determine the phenotypes and DNA to investigate SNPs in candidate genes. During the radiographic exam, teeth presenting root canal(s) doubly curved were considered S-shaped roots. SNPs in BMP2 (rs1005464 and rs235768), BMP4 (rs17563) and SMAD6 (rs2119261 and rs3934908) were blindly genotyped by real-time PCR using TaqMan assay. The relative and absolute frequency of S-shaped roots were calculated. Chi-square test was used to compare the genotype distributions between control and S-shaped groups. RESULTS: Among the 578 subjects, 61 (10.6 %) presented at least one tooth with an S-shaped root. The most commonly affected type of tooth was the premolar. rs1005464 in BMP2 was statistically associated with an S-shaped root (p = 0.036). rs235768 in BMP2 was associated with an S-shaped root also in mandibular teeth (p = 0.017). A statistical significance was observed for the rs3934908 in SMAD6 (p = 0.049) for S-shaped root in the mandible. In the analysis stratified according to the type of tooth, rs235768 in BMP2 was associated with S-shaped roots in premolars (p = 0.029). CONCLUSION: The prevalence of S-shaped roots is 10.6 % in permanent teeth. SNPs in BMP2 and SMAD6 could be involved in a higher chance to present S-shaped roots.

Association between the intensity of obstructive sleep apnea and skeletal alterations in the face and hyoid bone / Relação entre a influência da gravidade da apneia obstrutiva do sono e alterações craniofaciais e do posicionamento do osso hioide

Abstract Introduction The association between the intensity of obstructive sleep apnea and skeletal alterations in the face and hyoid bone is still scarcely addressed in the literature. Objective To evaluate whether the intensity of obstructive sleep apnea is associated with craniofacial alterations and the position of the hyoid bone in children with mixed dentition. Methods 76 children aged 7 to 10 years old were examined by otorhinolaryngological evaluation, polysomnography, and orthodontic assessment, including cephalometry. The participants were divided in 3 groups: primary snoring, mild obstructive sleep apnea and moderate to severe obstructive sleep apnea. Cephalometric measures of the face and hyoid bone were assessed. These measures were compared among the different groups by unpaired Student's t test. Moreover, these measures were correlated with the patient's obstructive apnea and hypopnea index variable using Pearson's correlation test. Results Of the 76 children, 14 belonged to group 1, with primary snoring; 46 to group 2, with mild obstructive sleep apnea; and 16 to group 3, with moderate-severe obstructive sleep apnea. There was no difference between the groups regarding the craniofacial variables. Children with obstructive sleep apnea showed a longer distance from the hyoid bone to the mandibular plane when compared to the primary snoring group (p < 0.05). Between the two obstructive sleep apnea subgroups, patients with moderate or severe disease showed significantly shorter horizontal distance between the hyoid bone and the posterior pharyngeal wall (p < 0.05), when compared to the groups with mild obstructive sleep apnea. We also observed a significant positive correlation between obstructive apnea and hypopnea index and the distance from the hyoid to the mandibular plane (p < 0.05) as well as a significant negative association between obstructive apnea and hypopnea index and the horizontal distance from the hyoid to the posterior pharyngeal wall (p < 0.01). Conclusion We did not observe any association between obstructive sleep apnea and linear lateral alterations of the face. In contrast, there is a direct association between obstructive sleep apnea severity and the inferior and posterior position of the hyoid bone in children aged 7 to 10 years old.

Resumo Introdução A relação entre a intensidade da apneia obstrutiva do sono e alterações esqueléticas da face e do hioide em crianças é pouco explorada na literatura. Objetivo Avaliar se a intensidade da apneia obstrutiva do sono correlaciona-se às alterações craniofaciais e ao posicionamento do osso hioide em crianças em fase de dentição mista. Método Foram submetidas 76 crianças entre 7 e 10 anos à avaliação otorrinolaringológica, polissonografia e avaliação ortodôntica, inclusive cefalometria. Os participantes foram divididos em 3 grupos: grupo 1 com ronco primário, grupo 2 com apneia obstrutiva do sono leve e grupo 3 com apneia obstrutiva do sono moderada/grave. Foram analisadas medidas cefalométricas da face e do osso hioide. Essas medidas foram comparadas entre si dentro dos diferentes grupos por teste t de Student não pareado. Além disso, essas medidas foram correlacionadas com a variável índice de apneias obstrutivas e hipopneias do paciente através do teste de correlação de Pearson. Resultados Das 76 crianças, 14 constituíram o grupo 1, ronco primário; 46 o grupo 2, apneia obstrutiva do sono leve; e 16 o grupo 3, apneia obstrutiva do sono moderada/grave. Não se observou diferença significante entre os grupos para as variáveis craniofaciais. Observou-se maior distância do osso hioide ao plano mandibular nos dois grupos com apneia obstrutiva do sono quando comparado ao ronco primário (p < 0,05). Entre os dois subgrupos da apneia obstrutiva do sono, os pacientes com doença moderada ou grave apresentaram distância horizontal entre o hioide e a parede posterior da faringe significantemente menor (p < 0,05), quando comparados aos grupos com apneia obstrutiva do sono leve. Observamos ainda correlação significantemente positiva entre índice de apneias obstrutivas e hipopneias e a distância do hioide ao plano mandibular (p < 0,05) e significantemente negativa entre índice de apneias obstrutivas e hipopneias e distância horizontal do hioide com a parede posterior da faringe (p < 0,01). Conclusão Não observamos relação da apneia obstrutiva do sono com alterações lineares laterais da face. Em contraste, existe relação direta entre a gravidade da apneia obstrutiva do sono e a posição inferior e posterior do osso hioide em crianças entre 7 e 10 anos.