Production of water-dispersible reduced graphene oxide without stabilizers using liquid-phase photoreduction.

We successfully produced water-dispersible reduced graphene oxide (rGO) by pH tuning liquid-phase photoreduction. In this method, the stabilizers and chemical modification usually used for dispersing rGO are not required. The stable carboxyl groups continue to ionize throughout the photoreduction process under alkaline conditions and continue to provide water-dispersible rGO. Moreover, the decomposition of GO into CO2 is prevented, and the production of defects is largely avoided. This is because the epoxide groups on the GO nanosheets that lead to decomposition are converted into hydroxide groups under alkaline conditions. Thus, this simple aggregation-, defect-, and stabilizer-free method is potentially important for the future application of rGO.

All-Graphene Oxide Flexible Solid-State Supercapacitors with Enhanced Electrochemical Performance.

The rapid development of flexible and wearable electronics has led to an increase in the demand for flexible supercapacitors with enhanced electrochemical performance. Graphene oxide (GO) and reduced GO (rGO) exhibit several key properties required for supercapacitor components. Although solid-state rGO/GO/rGO supercapacitors with unique structures are promising, their moderate capacitance is inadequate for practical applications. Herein, we report a flexible solid-state rGO/GO/rGO supercapacitor comprising H2SO4-intercalated GO electrolyte/separator and pseudocapacitive rGO electrodes, which demonstrate excellent electrochemical performance. The resulting supercapacitor delivered an areal capacitance of 14.5 mF cm-2, which is among the highest values achieved for any rGO/GO/rGO supercapacitor. High ionic concentration and fast ion conduction in the H2SO4-intercalated GO electrolyte/separator and abundant CH defects, which serve as pseudocapacitive sites on the rGO electrode, were responsible for the high capacitance of this device. The rGO electrode, well separated by the H2SO4 molecular spacer, supplied highly efficient ion transport channels, leading to excellent rate capability. The highly packed rGO electrode and high specific capacitance resulted in a high volumetric energy density (1.24 mWh cm-3) observed in this supercapacitor. The structure, without a clear interface between GO and rGO, provides extremely low resistance and flexibility for devices. Our device operated in air (25 °C 40%) without the use of external electrolytes, conductive additives, and binders. Furthermore, we demonstrate a simple and versatile technique for supercapacitor fabrication by combining photoreduction and electrochemical treatment. These advantages are attractive for developing novel carbon-based energy devices with high device performance and low fabrication costs.

All-graphene oxide device with tunable supercapacitor and battery behaviour by the working voltage.

We propose a new type of all-graphene oxide device. Reduced graphene oxide (rGO)/graphene oxide (GO)/rGO functions as both a supercapacitor and a battery, depending on the working voltage. The rGO/GO/rGO operates as a supercapacitor until 1.2 V. At greater than 1.5 V, it behaves as a battery using redox reaction.

Coal Oxide as a Thermally Robust Carbon-Based Proton Conductor.

Inexpensive solid proton conducting materials with high proton conductivity and thermal stability are necessary for practical solid state electrochemical devices. Here we report that coal oxide (CO) is a promising carbon-based proton conductor with remarkable thermal robustness. The CO produced by simple liquid-phase oxidation of coal demonstrates excellent dispersibility in water owing to the surface carboxyl groups. The proton conductivity of CO, 3.9 × 10(-3) S cm(-1) at 90% relative humidity, is as high as that of graphene oxide (GO). Remarkably, CO exhibits much higher thermal stability than GO, with CO retaining the excellent proton conductivity as well as the capacitance performance even after thermal annealing at 200 °C. Our study demonstrates that the chemical modification of the abundant coal provides proton conductors that can be used in practical applications for a wide range of energy devices.

Optimization of proton conductivity in graphene oxide by filling sulfate ions.

Graphene oxide (GO) walled channels filled by sulfate ions exhibit an optimized proton conductivity, which is higher than the proton conductivity of all other forms of GO. The sulphate ion increases the water absorbing capacity and hydrogen bond reformation process in GO.

Reversibly tunable upconversion luminescence by host-guest chemistry.

Tuning upconversion (UPC) luminescence using external stimuli and fields, as well as chemical reactions, is expected to lead to novel and efficient optical sensors. Herein, highly tunable UPC luminescence was achieved through a host-guest chemistry approach. Specifically, interlayer ion exchange reactions reversibly tuned the emission intensity and green-red color of Er/Yb-codoped A2La2Ti3O10 layered perovskite, where A corresponds to proton and alkali metal ions, enabling the visualization of host-guest interactions and reactions.

Proton conductivities of graphene oxide nanosheets: single, multilayer, and modified nanosheets.

Proton conductivities of layered solid electrolytes can be improved by minimizing strain along the conduction path. It is shown that the conductivities (σ) of multilayer graphene oxide (GO) films (assembled by the drop-cast method) are larger than those of single-layer GO (prepared by either the drop-cast or the Langmuir-Blodgett (LB) method). At 60% relative humidity (RH), the σ value increases from 1×10(-6) S cm(-1) in single-layer GO to 1×10(-4) and 4×10(-4) S cm(-1) for 60 and 200 nm thick multilayer films, respectively. A sudden decrease in conductivity was observed for with ethylenediamine (EDA) modified GO (enGO), which is due to the blocking of epoxy groups. This experiment confirmed that the epoxide groups are the major contributor to the efficient proton transport. Because of a gradual improvement of the conduction path and an increase in the water content, σ values increase with the thickness of the multilayer films. The reported methods might be applicable to the optimization of the proton conductivity in other layered solid electrolytes.

Metal permeation into multi-layered graphene oxide.

Understanding the chemical and physical properties of metal/graphene oxide (M/GO) interfaces is important when GO is used in electronic and electrochemical devices because the metal layer must be firmly attached to GO. Here, permeation of metal from the surface into GO paper bulk at the M/GO interface was observed at room temperature for metals such as Cu, Ag, Ni, Au, and Pt. Cu, Ag, and Ni quickly permeated GO as ions into the bulk under humid conditions. At first, these metals changed to hydrated ions as a result of redox reactions (with reduction of GO) at the surface, and then permeated the interlayers. Au and Pt were observed to permeate GO as atoms into the GO bulk at room temperature, although the permeation rates were low. These surprising results are considered to be due to the presence of many defects and/or edges with oxygenated groups in the GO paper.

DNA analysis based on toehold-mediated strand displacement on graphene oxide.

Fluorescent dye-labeled probe DNA was immobilized on fluorescence-quenching graphene oxide (GO) through a capture DNA. When targets were added, the probes were released from the GO through toehold-mediated strand exchange. Higher emission recovery and more signal contrast were achieved relative to conventional methods that are based on direct adsorption of probes.

Graphene oxide nanosheet with high proton conductivity.

We measured the proton conductivity of bulk graphite oxide (GO'), a graphene oxide/proton hybrid (GO-H), and a graphene oxide (GO) nanosheet for the first time. GO is a well-known electronic insulator, but for proton conduction we observed the reverse trend, as it exhibited superionic conductivity. The hydrophilic sites present in GO as -O-, -OH, and -COOH functional groups attract the protons, which propagate through hydrogen-bonding networks along the adsorbed water film. The proton conductivities of GO' and GO-H at 100% humidity were ∼10(-4) and ∼10(-5) S cm(-1), respectively, whereas that for GO was amazingly high, nearly 10(-2) S cm(-1). This finding indicates the possibility of GO-based perfect two-dimensional proton-conductive materials for applications in fuel cells, sensors, and so on.

Intense photoluminescence from ceria-based nanoscale lamellar hybrid.

Nanosheets, which are ultrathin inorganic crystals, have the potential to exhibit unique surface states and quantum effects. These nanosheets can be further manipulated to form lamellar structures for the fabrication of advanced hybrid nanomaterials. Here we report that conventionally nonluminescent ceria yields intense UV photoluminescence with an internal quantum yield (QY) of 59% when self-organized into a nanosheet lamellar architecture with dodecyl sulfate (DS) bilayers. The origin of luminescence exist at the organic/inorganic interfaces, where surface Ce(3+) ions of ceria nanosheet layers graft with DS anions to activate radiative 5d → 4f transition.

Simple photoreduction of graphene oxide nanosheet under mild conditions.

Graphene oxide (GO) nanosheets were reduced by UV irradiation in H2 or N2 under mild conditions (at room temperature) without a photocatalyst. Photoreduction proceeded even in an aqueous suspension of nanosheets. The GO nanosheets reduced by this method were analyzed by X-ray photoelectron spectroscopy and Raman spectroscopy. It was found that epoxy groups attached to the interiors of aromatic domains of the GO nanosheet were destroyed during UV irradiation to form relatively large sp2 islands resulting in a high conductivity. I-V curves were measured by conductive atomic force microscopy (AFM; perpendicular to a single nanosheet) and a two-electrode system (parallel to the nanosheet). They revealed that photoreduced GO nanosheets have high conductivities, whereas nonreduced GO nanosheets are nearly insulating. Ag+ adsorbed on GO nanosheets promoted the photoreduction. This photoreduction method was very useful for photopatterning a conducting section of micrometer size on insulating GO. The developed photoreduction process based on a photoreaction will extend the applications of GO to many fields because it can be performed in mild conditions without a photocatalyst.

Preparation of p-type CaFe2O4 photocathodes for producing hydrogen from water.

An (hk0)-oriented p-type CaFe2O4 (E(g): 1.9 eV) photocathode was prepared, and hydrogen and oxygen gases were produced from a photocell short-circuited by connecting the CaFe2O4 and n-type TiO2 electrodes under illumination without applying an external voltage. The open-circuited voltage was 0.97 V and the short-circuit current was about 200 µA/cm(2), and the amount of evaluated hydrogen and oxygen gases after 2 days of reaction were about 70 and 4 µmol, respectively.

Drastic changes in photoluminescence properties of multilayer films composed of europium hydroxide and titanium oxide nanosheets.

Multilayer films consisting of Eu(OH)(3-x) and titanium oxide nanosheets showed strong Eu(3+) emission under UV-light irradiation, in which the titanium oxide nanosheet works as an antenna collecting UV-light, and then the Eu(OH)(3-x) nanosheet acts as an emitting layer receiving the absorbed energy.

Synthesis of blue amorphous TiO2 and Ti(n)O(2n-1) by the impulse plasma in liquid.

Synthesis of blue amorphous TiO2 and Ti(n)O(2n-1) by the impulse plasma in dielectric liquid is presented. The impulse plasma in liquid enables us to quench from plasma state, by which we can synthesize nanomaterials, metastable materials, etc. By the impulse plasma between titanium rods submerged into water, we have synthesized blue colored amorphous TiO2 nanoparticles suspended in water and black titanium monoxide at the bottom. Different types of titania oxides like Ti3O, TiO, Ti2O3, Ti4O7 were produced by the impulse plasma in different water temperatures (3, 30, 60, and 90 degrees C respectively). High Resolution Transmission Electron Microscopy analysis showed that the amorphous TiO2 contains anatase nanocrystals with less than 10 nm. UV-vis absorption spectra of the blue TiO2 nanoparticles showed higher absorbance of visible light than the commercially available pure anatase nanoparticles.

N doping of oxide nanosheets.

Photo-N doping for Nb-O system oxide nanosheets such as Nb(6)O(17), TINbO(5), and Ca(2)Nb(3)O(10) was succeeded in by treatment under mild conditions, where their H-restacked forms containing tetrabuthylammonium (TBA) ion were illuminated by UV light at room temperature. A relatively strong absorption in visible light region (400 approximately 600 nm) was observed for the N-doped samples because of formation of p-band or valence band hybridization of N in the Nb-O bandgap. The N doping proceeded only under TBA presence in water without O(2), and Pt loading promoted this doping reaction. It is proposed as a mechanism from the results of the doping for the Ti-O and Nb-O nanosheet mixed samples, that the Nb-O nanosheet acts as a photocatalyst for the N-doping reaction. This is the first report of N doping to oxide nanosheets.

Synthesis of hexagonal nickel hydroxide nanosheets by exfoliation of layered nickel hydroxide intercalated with dodecyl sulfate ions.

One-nanometer-thick nickel hydroxide nanosheets were prepared by exfoliation of layered nickel hydroxides intercalated with dodecyl sulfate (DS) ions. The shape of the nanosheets was hexagonal, as was that of the layered nickel hydroxides intercalated with DS ions. The nickel hydroxide nanosheets exhibited charge-discharge properties in strong alkaline electrolyte. The morphology of the nanosheet changed during the electrochemical reaction.

Photoluminescence of perovskite nanosheets prepared by exfoliation of layered oxides, K2Ln2Ti3O10, KLnNb2O7, and RbLnTa2O7 (Ln: lanthanide ion).

Luminescent perovskite nanosheets were prepared by exfoliation of single- or double-layered perovskite oxides, K2Ln2Ti3O10, KLnNb2O7, and RbLnTa2O7 (Ln: lanthanide ion). The thickness of the individual nanosheets corresponded to those of the perovskite block in the parent layered compounds. Intense red and green emissions were observed in aqueous solutions with Gd1.4Eu0.6Ti3O10- and La0.7Tb0.3Ta2O7-nanosheets, respectively, under UV illumination with energies greater than the corresponding host oxide band gap. The coincidence of the excitation spectrum and the band gap absorbance indicates that the visible emission results from energy transfer within the nanosheet. The red emission intensity of the Gd1.4Eu0.6Ti3O10-nanosheets was much stronger than that of the La0.90Eu0.05Nb2O7-nanosheets reported previously. The strong emission intensity is a result of a two-step energy transfer cascade within the nanosheet from the Ti-O network to Gd(3+) and then to Eu(3+). The emission intensities of the Gd1.4Eu0.6Ti3O10- and La0.7Tb0.3Ta2O7-nanosheets can be modulated by applying a magnetic field (1.3-1.4 T), which brings about a change in orientation of the nanosheets in solution. The emission intensities increased when the excitation light and the magnetic field directions were perpendicular to each other, and they decreased when the excitation and magnetic field were collinear and mutually perpendicular to the direction of detection of the emitted light.