The Use of a Combination of a Sugar and Surfactant to Stabilize Au Nanoparticle Dispersion against Aggregation during Freeze-Drying.

Drying a suspension of nanoparticles typically results in the irreversible aggregation of nanoparticles; however, solutions that contain unstable ingredients are often converted into dried powders to prolong their shelf lives. In this study, the use of a combination of a surface-active agent and sugar was investigated with regard to avoiding the aggregation of nanoparticles during drying. Suspensions of Au nanoparticles (∼60 nm diameter, AuNPs) were freeze-dried in the presence of different combinations of various sugars with a surfactant. Sucrose monopalmitate (SEC16) was mainly used as the surfactant, based on a comparison of antiaggregation effects conferred by various surfactants. The freeze-dried AuNP suspension was then reconstituted, and the avoidance of AuNP aggregation was then examined. The results demonstrated that the use of a combination of a small amount of SEC16 and sugar resulted in a greater redispersibility of AuNPs after freeze-drying than when the individual components were used. Repetition tests of freeze-drying and reconstitution were conducted. The sucrose/SEC16 mixture was freeze-dried on an electroless-plated Au film and then analyzed by infrared spectroscopy. Strong interactions between SEC16 and the Au surface were detected, and these interactions appear to play a crucial role in the antiaggregation of AuNPs during freeze-drying.

Physical Stability of an Amorphous Sugar Matrix Dried From Methanol as an Amorphous Solid Dispersion Carrier and the Influence of Heat Treatment.

An amorphous sugar matrix, after drying from an organic solvent, was investigated for use as a method for dispersing hydrophobic drugs (solid dispersion). However, the amorphous sugar, originally contained in the organic solvent, had a significantly low glass transition temperature (Tg), thus rendering it physically unstable. In this study, we examined the physicochemical properties of a sugar in a dried matrix and in an organic solvent, using α-maltose and methanol as a representative sugar and organic solvent. The apparent molar volume of α-maltose was ∼30% smaller in methanol than in water. The methanol-originated amorphous α-maltose exhibited a much greater degree of hydrogen bonding than the water-originated one. Considering these findings, we conclude that the α-maltose maintained its compact conformation in the dried state and consequently caused the markedly low Tg. Second, it was found that heating under appropriate conditions resulted in an increase in the Tg of the methanol-originated amorphous α-maltose as well as a decrease in the level of hydrogen bonding. The aqueous dissolution of 2 model hydrophobic drugs (indomethacin and ibuprofen) from the solid dispersion was also improved as the result of the heat treatment, whereas, to the contrary, the dissolution of another model drug (curcumin) was lowered.

Effect of Alcohols on the Phase Behavior and Emulsification of a Sucrose Fatty Acid Ester/Water/Edible Oil System.

The effect of alcohols (ethanol, 1-propanol, propylene glycol, glycerin, sucrose) on the phase behavior and emulsification of sucrose stearic acid ester (SSE)/water/edible vegetable oil (EVO) systems was investigated. Adding sucrose, propylene glycol, and glycerin narrowed the oil-separated two-phase region in the phase diagram of the SSE/water/EVO systems, whereas adding ethanol and 1-propanol expanded the oil-separated two-phase region. Changing the course of emulsification in the phase diagram showed that the size of the oil-droplet particle typically decreased in a system with a narrowed oil-separated region. The emulsification properties of the systems varied with respect to changes in the phase diagram. The microstructure of the systems was examined using small-angle X-ray scattering, and the ability to retain the oil in the lamellar structure of the SSEs was suggested as an important role in emulsification, because the mechanism of the systems was the same as that for the liquid crystal emulsification method.

Surfactant-Free Solid Dispersions of Hydrophobic Drugs in an Amorphous Sugar Matrix Dried from an Organic Solvent.

The technique for homogeneously dispersing hydrophobic drugs in a water-soluble solid matrix (solid dispersion) is a subject that has been extensively investigated in the pharmaceutical industry. Herein, a novel technique for dispersing a solid, without the need to use a surfactant, is reported. A freeze-dried amorphous sugar sample was dissolved in an organic solvent, which contained a soluble model hydrophobic component. The suspension of the sugar and the model hydrophobic component was vacuum foam dried to give a solid powder. Four types of sugars and methanol were used as representative sugars and the organic medium. Four model drugs (indomethacin, ibuprofen, gliclazide, and nifedipine) were employed. Differential scanning calorimetry analyses indicated that the sugar and model drug (100:1) did not undergo segregation during the drying process. The dissolution of the hydrophobic drugs in water from the solid dispersion was then evaluated, and the results indicated that the Cmax and AUC0-60 min of the hydrophobic drug in water were increased when the surfactant-free solid dispersion was used. Palatinose and/or α-maltose were superior to the other tested carbohydrates in increasing Cmax and AUC0-60 min for all tested model drugs, and the model drug with a lower water solubility tended to exhibit a greater extent of over-dissolution.

Surfactant-free solid dispersion of fat-soluble flavour in an amorphous sugar matrix.

A solid dispersion technique to homogeneously disperse hydrophobic ingredients in a water-soluble solid without using surfactant was examined as follows: first, freeze-dried amorphous sugar was dissolved in an organic medium that contained a soluble model hydrophobic component. Second, the mixed solution of sugar and the model hydrophobic component was vacuum dried into a solid (solid dispersion). Methanol and six fat-soluble flavours, including cinnamaldehyde, were used as organic media and model hydrophobic components. The retention of flavours in the solid dispersion during drying and storage under vacuum was evaluated. The amorphised disaccharides dissolved in methanol up to 100mg/mL, even temporarily (20s to 10 days) and could be solidified without any evidence of crystallisation and segregation from flavour. The solid dispersion, prepared using α-maltose usually showed 65-95% flavour retention during drying (and storage for cinnamaldehyde), whereas ⩾ 50% of the flavour was lost when the flavour was O/W emulsified with a surfactant and then freeze-dried with sugar.

Characteristics of sugar surfactants in stabilizing proteins during freeze-thawing and freeze-drying.

Sugar surfactants with different alkyl chain lengths and sugar head groups were compared for their protein-stabilizing effect during freeze-thawing and freeze-drying. Six enzymes, different in terms of tolerance against inactivation because of freeze-thawing and freeze-drying, were used as model proteins. The enzyme activities that remained after freeze-thawing and freeze-drying in the presence of a sugar surfactant were measured for different types and concentrations of sugar surfactants. Sugar surfactants stabilized all of the tested enzymes both during freeze-thawing and freeze-drying, and a one or two order higher amount of added sugar surfactant was required for achieving protein stabilization during freeze-drying than for the cryoprotection. The comprehensive comparison showed that the C10-C12 esters of sucrose or trehalose were the most effective through the freeze-drying process: the remaining enzyme activities after freeze-thawing and freeze-drying increased at the sugar ester concentrations of 1-10 and 10-100 µM, respectively, and increased to a greater extent than for the other surfactants at higher concentrations. Results also indicate that, when a decent amount of sugar was also added, the protein-stabilizing effect of a small amount of sugar ester through the freeze-drying process could be enhanced.