Bismuth as a versatile cation for luminescence in coordination polymers from BiX3/4,4'-bipy: understanding of photophysics by quantum chemical calculations and structural parallels to lanthanides.

Coordination polymers (CPs) with bismuth(iii) as a connectivity centre have been prepared from BiX3 (X = Cl-I) and 4,4'-bipyridine (bipy) in order to implement Bi-based luminescence. The products were obtained via different synthetic routes such as solution chemistry, melt syntheses or mechanochemical reactions. Five neutral and anionic 1D-CPs are presented that show a chemical parallel to trivalent lanthanides forming isostructural or closely related 1D-CPs, of which five additional compounds are described. Bi3+ proves to be a versatile cation for luminescence resulting from energy transfer processes between a metal and a ligand in the presented CPs. Quantum chemical calculations were carried out to investigate Bi3+-participation in the luminescence processes. The calculated results allow an assignment of the bright transitions composed of mainly metal-to-ligand-charge transfer (MLCT) character. These results show that Bi3+ can form strongly luminescent coordination compounds with N-donor ligands.

Study of the Discrepancies between Crystallographic Porosity and Guest Access into Cadmium-Imidazolate Frameworks and Tunable Luminescence Properties by Incorporation of Lanthanides.

An extended member of the isoreticular family of metal-imidazolate framework structures, IFP-6 (IFP=imidazolate framework Potsdam), based on cadmium metal and an in situ functionalized 2-methylimidazolate-4-amide-5-imidate linker is reported. A porous 3D framework with 1D hexagonal channels with accessible pore windows of 0.52 nm has been synthesized by using an ionic liquid (IL) linker precursor. IFP-6 shows significant gas uptake capacity only for CO2 and CH4 at elevated pressure, whereas it does not adsorb N2 , H2 , and CH4 under atmospheric conditions. IFP-6 is assumed to deteriorate at the outside of the material during the activation process. This closing of the metal-organic framework (MOF) pores is proven by positron annihilation lifetime spectroscopy (PALS), which revealed inherent crystal defects. PALS results support the conservation of the inner pores of IFP-6. IFP-6 has also been successfully loaded with luminescent trivalent lanthanide ions (Ln(III) =Tb, Eu, and Sm) in a bottom-up one-pot reaction through the in situ generation of the linker ligand and in situ incorporation of photoluminescent Ln ions into the constituting network. The results of photoluminescence investigations and powder XRD provide evidence that the Ln ions are not doped as connectivity centers into the frameworks, but are instead located within the pores of the MOFs. Under UV light irradiation, Tb@IFP-6 and Eu@IFP-6 (λexc =365 nm) exhibit observable emission changes to a greenish and reddish color, respectively, as a result of strong Ln 4 f emissions.

Post-Synthetic Shaping of Porosity and Crystal Structure of Ln-Bipy-MOFs by Thermal Treatment.

The reaction of anhydrous lanthanide chlorides together with 4,4'-bipyridine yields the MOFs 2∞[Ln2Cl6(bipy)3]·2bipy, with Ln = Pr - Yb, bipy = 4,4'-bipyridine, and 3∞[La2Cl6(bipy)5]·4bipy. Post-synthetic thermal treatment in combination with different vacuum conditions was successfully used to shape the porosity of the MOFs. In addition to the MOFs microporosity, a tuneable mesoporosity can be implemented depending on the treatment conditions as a surface morphological modification. Furthermore, thermal treatment without vacuum results in several identifiable crystalline high-temperature phases. Instead of collapse of the frameworks upon heating, further aggregation under release of bipy is observed. 3∞[LaCl3(bipy)] and 2∞[Ln3Cl9(bipy)3], with Ln = La, Pr, Sm, and 1∞[Ho2Cl6(bipy)2] were identified and characterized, which can also exhibit luminescence. Besides being released upon heating, the linker 4,4'-bipyridine can undergo activation of C-C bonding in ortho-position leading to the in-situ formation of 4,4':2',2'':4'',4'''-quaterpyridine (qtpy). qtpy can thereby function as linker itself, as shown for the formation of the network 2∞[Gd2Cl6(qtpy)2(bipy)2]·bipy. Altogether, the manuscript elaborates the influence of thermal treatment beyond the usual activation procedures reported for MOFs.

Ionic liquid versus prodrug strategy to address formulation challenges.

PURPOSE: A poorly water soluble acidic active pharmaceutical ingredient (API) was transformed into an ionic liquid (IL) aiming at faster and higher oral availability in comparison to a prodrug. METHODS: API preparations were characterized in solid state by single crystal and powder diffraction, NMR, DSC, IR and in solution by NMR and ESI-MS. Dissolution and precipitation kinetics were detailed as was the role of the counterion on API supersaturation. Transepithelial API transport through Caco-2 monolayers and counterion cytotoxicity were assessed. RESULTS: The mechanism leading to a 700 fold faster dissolution rate and longer duration of API supersaturation of the ionic liquid in comparison to the free acid was deciphered. Transepithelial transport was about three times higher for the IL in comparison to the prodrug when substances were applied as suspensions with the higher solubility of the IL outpacing the higher permeability of the prodrug. The counterion was nontoxic with IC50 values in the upper µM / lower mM range in cell lines of hepatic and renal origin as well as in macrophages. CONCLUSION: The IL approach was instrumental for tuning physico-chemical API properties, while avoiding the inherent need for structural changes as required for prodrugs.

The series of rare earth complexes [Ln2Cl6 (µ-4,4'-bipy)(py)6], Ln=Y, Pr, Nd, Sm-Yb: a molecular model system for luminescence properties in MOFs based on LnCl3 and 4,4'-bipyridine.

A series of 12 dinuclear complexes [Ln2Cl6(µ-4,4'-bipy)(py)6], Ln=Y, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, (1-12, respectively) was synthesized by an anhydrous solvothermal reaction in pyridine. The complexes contain a 4,4'-bipyridine bridge and exhibit a coordination sphere closely related to luminescent lanthanide MOFs based on LnCl3 and 4,4-bipyridine. The dinuclear complexes therefore function as a molecular model system to provide a better understanding of the luminescence mechanisms in the Ln-N-MOFs (∞)(2)[Ln2Cl6(4,4'-bipy)3]·2(4,4'-bipy). Accordingly, the luminescence properties of the complexes with Ln=Y, Sm, Eu, Gd, Tb, Dy, (1, 4-8) were determined, showing an antenna effect through a ligand-metal energy transfer. The highest efficiency of luminescence is observed for the terbium-based compound 7 displaying a high quantum yield (QY of 86%). Excitation with UV light reveals typical emission colors of lanthanide-dependent intra 4f-4f-transition emissions in the visible range (Tb(III) : green, Eu(III) : red, Sm(III) : salmon red, Dy(III) : yellow). For the Gd(III)- and Y(III)-containing compounds 6 and 1, blue emission based on triplet phosphorescence is observed. Furthermore, ligand-to-metal charge-transfer (LMCT) states, based on the interaction of Cl(-) with Eu(III), were observed for the Eu(III) compound 5 including energy-transfer processes to the Eu(III) ion. Altogether, the model complexes give further insights into the luminescence of the related MOFs, for example, rationalization of Ln-independent quantum yields in the related MOFs.

Metal-organic framework luminescence in the yellow gap by codoping of the homoleptic imidazolate ∞(3)[Ba(Im)2] with divalent europium.

The rare case of a metal-triggered broad-band yellow emitter among inorganic-organic hybrid materials was achieved by in situ codoping of the novel imidazolate metal-organic framework ∞(3)[Ba(Im)2] with divalent europium. The emission maximum of this dense framework is in the center of the yellow gap of primary light-emitting diode phosphors. Up to 20% Eu2+ can be added to replace Ba2+ as connectivity centers without causing observable phase segregation. High-resolution energy-dispersive X-ray spectroscopy showed that incorporation of even 30% Eu2+ is possible on an atomic level, with 2-10% Eu2+ giving the peak quantum efficiency (QE = 0.32). The yellow emission can be triggered by two processes: direct excitation of Eu2+ and an antenna effect of the imidazolate linkers. The emission is fully europium-centered, involving 5d → 4f transitions, and depends on the imidazolate surroundings of the metal ions. The framework can be obtained by a solvent-free in situ approach starting from barium metal, europium metal, and a melt of imidazole in a redox reaction. Better homogeneity for the distribution of the luminescence centers was achieved by utilizing the hydrides BaH2 and EuH2 instead of the metals.

Alkaline earth imidazolate coordination polymers by solvent free melt synthesis as potential host lattices for rare earth photoluminescence: (x)(∞)[AE(Im)2(ImH)(2-3)], Mg, Ca, Sr, Ba, x = 1-2.

The series of alkaline earth elements magnesium, calcium, strontium and barium yields single crystalline imidazolate coordination polymers by reactions of the metals with a melt of 1H-imidazole: (1)(∞)[Mg(Im)(2)(ImH)(3)] (1), (2)(∞)[AE(Im)(2)(ImH)(2)], AE = Ca (2), Sr (3), and (1)(∞)[Ba(Im)(2)(ImH)(2)] (4). No additional solvents were used for the reactions. Co-doping experiments by addition of the rare earth elements cerium, europium and terbium were carried out. They indicate (2)(∞)[Sr(Im)(2)(ImH)(2)] as a possible host lattice for cerium(III) photoluminescence showing a blue emission and thus a novel blue emitting hybrid material phosphor 3:Ce(3+). Co-doping with europium and terbium is also possible but resulted in formation of (3)(∞)[Sr(Im)(2)]:Ln, Ln = Eu and Tb (5), with both exhibiting green emission of either Eu(2+) or Tb(3+). The other alkaline earth elements do not show acceptance of the rare earth ions investigated and a different structural chemistry. For magnesium and barium one-dimensional strand structures are observed whereas calcium and strontium give two-dimensional network structures. Combined with an increase of the ionic radii of AE(2+) the coordinative demand is also increasing from Mg(2+) to Ba(2+), reflected by four different crystal structures for the four elements Mg, Ca, Sr, Ba in 1-4. Different linkages of the imidazolate ligands result in a change from complete σ-N coordination in 1 to additional η(5)-π coordination in 4. The success of co-doping with different lanthanide ions is based on a match in the chemical behaviour and cationic radii. The use of strontium for host lattices with imidazole is a rare example in coordination chemistry of co-doping with small amounts of luminescence centers and successfully reduces the amount of high price rare earth elements in hybrid materials while maintaining the properties. All compounds are examples of pure N-coordinated coordination polymers of the alkaline earth metals and were identified by single crystal X-ray analysis and powder diffraction. The degree of co-doping was determined by SEM/EDX. Mid IR, Far IR and Raman spectroscopy and micro analyses as well as simultaneous DTA/TG were also carried out to characterize the products in addition to the photoluminescence studies of the co-doped samples.

Botulinum toxin: A noninvasive option for the symptomatic treatment of salivary gland stenosis - a case report.

BACKGROUND: A man diagnosed with Stensen's duct stenosis exhibited recurrent parotid swelling, invariably during meals. Previous parotid duct dilations and percutaneous radiotherapy were ineffective. Botulinum toxin (BTX) injections were injected into the affected gland to regulate salivary flow and reduce parotid swelling. METHODS: BTX (22.5 units) was injected into the affected gland. A second treatment with 30 units BTX was carried out 7 weeks later. Two further injections followed after 4 months, respectively. The results were scored by the patient and evaluated in an examination. RESULTS: The patient reported the disappearance of parotid swelling after 2 weeks of injections. This effect was maintained for 5 weeks after the first treatment and for 4 months after the following 2 treatments. There were no side effects. CONCLUSION: Here we introduce BTX as a therapeutic option for the treatment of salivary duct stenosis when other therapies are ineffective and before opting for gland extirpation.

Mixed valence europium nitridosilicate Eu2SiN3.

The mixed valence europium nitridosilicate Eu(2)SiN(3) has been synthesized at 900 degrees C in welded tantalum ampules starting from europium and silicon diimide Si(NH)(2) in a lithium flux. The structure of the black material has been determined by single-crystal X-ray diffraction analysis (Cmca (no. 64), a = 542.3(11) pm, b = 1061.0(2) pm, c = 1162.9(2) pm, Z = 8, 767 independent reflections, 37 parameters, R1 = 0.017, wR2 = 0.032). Eu(2)SiN(3) is a chain-type silicate comprising one-dimensional infinite nonbranched zweier chains of corner-sharing SiN(4) tetrahedra running parallel [100] with a maximum stretching factor f(s) = 1.0. The compound is isostructural with Ca(2)PN(3) and Rb(2)TiO(3), and it represents the first example of a nonbranched chain silicate in the class of nitridosilicates. There are two crystallographically distinct europium sites (at two different Wyckoff positions 8f) being occupied with Eu(2+) and Eu(3+), respectively. (151)Eu Mössbauer spectroscopy of Eu(2)SiN(3) differentiates unequivocally these two europium atoms and confirms their equiatomic multiplicity, showing static mixed valence with a constant ratio of the Eu(2+) and Eu(3+) signals over the whole temperature range. The Eu(2+) site shows magnetic hyperfine field splitting at 4.2 K. Magnetic susceptibility measurements exhibit Curie-Weiss behavior above 24 K with an effective magnetic moment of 7.5 mu(B)/f.u. and a small contribution of Eu(3+), in accordance with Eu(2+) and Eu(3+) in equiatomic ratio. Ferromagnetic ordering at unusually high temperature is detected at T(C) = 24 K. DFT calculations of Eu(2)SiN(3) reveal a band gap of approximately 0.2 eV, which is in agreement with the black color of the compound. Both DFT calculations and lattice energetic calculations (MAPLE) corroborate the assignment of two crystallographically independent Eu sites to Eu(2+) and Eu(3+).