Quantitative liquid chromatographic and tandem mass spectrometric determination of vitamin D3 in human serum with derivatization: a comparison of in-tube LLE, 96-well plate LLE and in-tip SPME.

Sensitive and selective methods based on high performance liquid chromatography (HPLC) with tandem mass spectrometric (MS/MS) detection were developed for the determination of vitamin D(3) in human serum. Derivatization of vitamin D(3) and its stable isotope labeled internal standard provided highly sensitive quantification and selective detection from endogenous compounds. Samples were prepared using the in-tube liquid-liquid extraction (LLE), 96-well plate LLE, and in-tip solid phase micro-extraction (SPME) in 96-well format. In all methods, the MS/MS detection was performed using Applied Biosystems-Sciex API 3000 tandem mass spectrometers interfaced with a heated nebulizer probe and operated in the positive ionization mode. Both tube and plate LLE methods achieved a lower limit of quantitation (LLOQ) of 0.5 ng/mL when 1.0 and 0.4 mL of human serum was processed, respectively, and were validated in the concentration range of 0.5-25 ng/mL; while for the in-tip SPME method, LLOQ was 5 ng/mL with only 0.1 mL of human serum required. Comparisons were made among three different methods, including precision and accuracy, sample throughput, recovery and matrix effects.

Comparison of solid-phase microextraction and liquid-liquid extraction in 96-well format for the determination of a drug compound in human plasma by liquid chromatography with tandem mass spectrometric detection.

Two sensitive and selective methods based on solid phase microextraction (SPME) and liquid-liquid extraction (LLE) in 96-well format, in combination with high performance liquid chromatography (HPLC) with tandem mass spectrometric (MS/MS) detection have been developed to determine a model drug compound in human plasma. Both assays were performed on an Applied Biosystems-Sciex API 4000 tandem mass spectrometer interfaced with a turbo ion-spray probe and operated in the negative ionization mode. A lower limit of quantitation (LLOQ) of 1 ng/mL achieved when 0.25 mL of human plasma was processed. In both methods, a stable isotope labeled internal standard was utilized. The methods were validated in the concentration range of 1-500 ng/mL. The intraday precision (%C.V.) of the method using LLE was 0.8% at LLOQ, and was equal to or lower than 3.3% at all other concentrations, while the intraday precision (%C.V.) of the method using SPME was 6.9% at LLOQ, and was equal to or lower than 5.7% at all other concentrations. Based on the direct comparison of the two methods and their successful applications in clinical sample analysis, it may be concluded that SPME may be considered and used as an alternative approach for quantitative determination of drugs in pharmacokinetic studies.

Determination of the HIV integrase inhibitor, MK-0518 (raltegravir), in human plasma using 96-well liquid-liquid extraction and HPLC-MS/MS.

An HPLC-MS/MS method was developed for the determination of MK-0518 (raltegravir), an HIV integrase inhibitor, in human plasma over the concentration range of 2-1000 ng/mL. Stable isotope labeled (13)C(6)-MK-0518 was used as an internal standard. The sample preparation procedure utilized liquid-liquid extraction with hexane:methylene chloride in the 96-well format with a 200 microL plasma sample size. The compounds were chromatographed on an Ace C(18) (50 x 3.0 mm, 3 microm, titanium frits) column with 42.5/57.5 (v/v %) 0.1mM EDTA in 0.1% formic acid/methanol mobile phase at a flow rate of 0.5 mL/min. Multiple reaction monitoring of the precursor-to-product ion pairs for MK-0518 (m/z 445-->109) and (13)C(6)-MK-0518 (m/z 451-->367) on an Applied Biosystem API 4000 HPLC-MS/MS was used for quantitation. Intraday precision of standard curve concentrations in five different lots of control plasma was within 3.2%, while accuracy ranged from 94.8 to 106.8%. The mean extraction recovery of spiked plasma samples was 87%. Quality control (QC) samples were stored at -20 degrees C. Initial within day analysis showed QC accuracy within 7.5% of nominal with precision of 3.1% or less. The plasma QC samples were demonstrated to be stable for up to 23 months at -20 degrees C. The method described has been used to support over 18 clinical studies during Phase I through III of clinical development.

Standard line slopes as a measure of a relative matrix effect in quantitative HPLC-MS bioanalysis.

A simple experimental approach for studying and identifying the relative matrix effect (for example "plasma-to-plasma" and/or "urine-to-urine") in quantitative analyses by HPLC-MS/MS is described. Using as a database a large number of examples of methods developed in recent years in our laboratories, the relationship between the precision of standard line slopes constructed in five different lots of a biofluid (for example plasma) and the reliability of determination of concentration of an analyte in a particular plasma lot (or subject) was examined. In addition, the precision of standard line slopes was compared when stable isotope-labeled analytes versus analogs were used as internal standards (IS). Also, in some cases, a direct comparison of standard line slopes was made when different HPLC-MS interfaces (APCI versus ESI) were used for the assay of the same compound, using the same IS and the same sample preparation and chromatographic separation conditions. In selected cases, the precision of standard line slopes in five different lots of a biofluid was compared with precision values determined five times in a single lot. The results of these studies indicated that the variability of standard line slopes in different lots of a biofluid [precision of standard line slopes expressed as coefficient of variation, CV (%)] may serve as a good indicator of a relative matrix effect and, it is suggested, this precision value should not exceed 3-4% for the method to be considered reliable and free from the relative matrix effect liability. Based on the results presented, in order to assess the relative matrix effect in bioanalytical methods, it is recommended to perform assay precision and accuracy determination in five different lots of a biofluid, instead of repeat (n=5) analysis in the same, single biofluid lot, calculate standard line slopes and precision of these slopes, and to use <3-4% slope precision value as a guide for method applicability to support clinical studies. It was also demonstrated that when stable isotope-labeled analytes were used as internal standards, the precision of standard line slopes in five different lots of a biofluid was

Characterization of the solubility of a poorly soluble hydroxylated metabolite in human urine and its implications for potential renal toxicity.

The solubility, in human urine, of the major hydroxylated metabolite (M1) of an experimental cognition enhancer was characterized through a series of in vitro experiments in an effort to estimate the probability of crystalluria occurring following oral administration of the parent compound. The aim of these experiments was to determine if a safety margin existed between clinically observed urine concentrations and the solubility of M1. The mean urine concentrations of M1 in young and elderly subjects following oral administration of the parent compound at the highest doses tested, were 4865 +/- 2368 ng/mL and 2764 +/- 791 ng/mL, respectively. In vitro solubility experiments with M1 were conducted in drug-free human urine (37 degrees C) from four male and four female healthy subjects under conditions of high and low urine osmolality. Mean concentrations (n = 16) of M1 in human urine to which solid M1 was added, were 3656 +/- 621 ng/mL, 4678 +/- 1169 ng/mL and 5378 +/- 2474 ng/mL after stirring for 24, 48 and 72 h, respectively, indicating that the ex vivo mean solubility of M1 in human urine is no greater then approximately 5 microg/mL. Addition of solid M1 to urine from human subjects dosed with the parent compound resulted in mean urine M1 concentrations 23.5% greater than those observed in vivo. The results from both experiments indicated a significant overlap between urine concentrations of M1 in vivo following the highest oral administration of the parent drug and M1 solubility measured in vitro, suggesting a high potential for in vivo saturation of urine with M1 with subsequent precipitation, crystalluria, and nephrotoxicity. Consequently, the results of these studies have placed restrictions on the dose that could be administered during clinical development of this compound.

Determination of an investigational HIV integrase inhibitor in human plasma using high performance liquid chromatography with tandem mass spectrometric detection.

An HPLC-MS/MS assay for the determination of an HIV integrase inhibitor, 5-(1,1-dioxido-1,2-thiazinan-2-yl)-N-(4-fluorobenzyl)-8-hydroxy-1,6-naphthyridine-7-carboxamide (I) in human plasma has been developed and validated. Compound I and a stable isotope labeled internal standard (II) were isolated from 0.5 mL plasma samples by solid phase extraction using an Ansys SPEC C-8 96-well plate. Extracts were separated on a Hypersil BDS C-18 HPLC column (3.0 mmx50 mm, 3 microm) with a mobile phase consisting of 25 mM ammonium formate pH 3.0:acetonitrile (60:40) vol%/vol% pumped at 0.5 mL/min. A Sciex API 365 mass spectrometer equipped with an atmospheric pressure chemical ionization source was operated in selected reaction monitoring (SRM) mode with the precursor-to-product ion transitions m/z 431-->109 (I) and m/z 437-->115 (II) used for quantitation. The assay was validated over the concentration range of 10-5000 ng/mL and was found to have acceptable accuracy, precision, linearity, and selectivity. The mean extraction recovery from spiked plasma samples was 69%. The intra-day accuracy of the assay was within 4% of nominal and intra-day precision was better than 4% C.V. Following a 200 mg dose of the compound administered to human subjects, concentrations of I ranged from 21.1 to 1500 ng/mL in plasma samples collected up to 12 h after dosing. Inter-day accuracy and precision results for quality control samples run over a 3-month period alongside clinical samples showed mean accuracies of within 6% of nominal and precision better than 3.5% C.V.

Assessment of the in-vivo stereochemical integrity of aprepitant based on the analysis of human plasma samples via high-performance liquid chromatography with mass spectrometric detection.

Achiral and chiral liquid chromatographic methods utilizing mass spectrometric detection were developed to investigate the possibility of inversion of configuration at any or all of the chiral centers of the neurokinin-1 (NK-1) receptor antagonist, aprepitant (5-[[2(R)-[1(R)-(3,5-bistrifluoromethyl phenyl)ethoxy]-3(S)-(4-fluorophenyl)morpholin-4-yl]methyl]-2,4-dihydro-[1,2,4]triazol-3-one), in-vivo, following administration of the compound to man. A structure such as aprepitant, that contains three chiral centers, may exist in eight stereochemical forms or, more specifically, as four diastereoisomeric pairs of enantiomers. The four diastereoisomers were separated from each other using a ProntoSil C18 AQ HPLC column (4.6 x 100 mm, 3 microm particles) with a mobile phase composed of acetonitrile--water (47:53, v/v%). Detection was via a single quadrupole mass spectrometer that was connected to the HPLC system via an APCI interface. Analysis of post-dose plasma samples under these conditions indicated that only aprepitant and or its enantiomer were present following oral administration of the drug. Aprepitant and its enantiomer were separated using a Chiralcel OD-H HPLC column with a mobile phase composed of hexane-isopropanol (80:20, v/v%); tandem mass spectrometric detection using an APCI interface was employed. Post-dose plasma samples analyzed using the Chiracel column were found to contain only aprepitant. The results of these experiments confirm that the products of inversion of configuration at any or all of the three chiral centers of aprepitant are not detectable in human plasma samples obtained following the administration of the drug.

Determination of dextromethorphan and its metabolite dextrorphan in human urine using high performance liquid chromatography with atmospheric pressure chemical ionization tandem mass spectrometry: a study of selectivity of a tandem mass spectrometric assay.

Analytical method for the simultaneous determination of dextromethorphan (1) and dextrorphan (2) in urine, based on solid-phase extraction of drug from acidified hydrolyzed biological matrix, were developed. The analytes (1 and 2) and the internal standard (levallorphan, 3, IS) were detected by high-performance liquid chromatography-mass spectrometry (HPLC-MS/MS) in positive ionization mode using a heated nebulizer (HN) probe and monitoring their precursor-->product ion combinations of m/z 272-->215, 258-->201, and 284-->201 for 1, 2, and 3, respectively, in multiple reaction monitoring mode. The analytes and IS were chromatographed on a Keystone Prism reverse phase (50 mm x 2.0 mm) 5 microm column using a mobile phases consisting of a 35/65 or 27/73 mixtures of methanol/water containing 0.1% TFA adjusted to pH 3 with ammonium hydroxide pumped at 0.4 ml/min for 1 and 2, respectively. The limits of reliable quantification of 1 and 2 were 2 and 250 ng/ml, respectively, when 1 ml of urine was processed. The absence of matrix effect was demonstrated by analysis of neat standards and standards spiked into urine extracts originating from five different sources. The linear ranges of the assay were 2-200 and 250-20,000 ng/ml for 1 and 2, respectively. Assay selectivity was evaluated by monitoring the "cross-talk" effects from other metabolites into the MS/MS channels used for monitoring 1, 2, and 3. In addition, an interfering peak originating from an unknown metabolite of 1 into the quantification of dextromethorphan was detected, requiring an effective chromatographic separation of analytes from other metabolites of 1. The need for careful assessment of selectivity of the HPLC-MS/MS assay in the presence of metabolites, and the assessment of matrix effect, are emphasized.

Elimination of autosampler carryover in a bioanalytical HPLC-MS/MS method: a case study.

A case study in identifying and eliminating the source of autosampler carryover in a bioanalytical HPLC-MS/MS assay is described. Through a series of systematic experiments, the carryover was traced to the injection valve and was eliminated by switching from a partial loop to a full loop injection, which provided more effective flushing of the sample flow path. The susceptibility of the HPLC system to carryover was demonstrated to depend on the absolute sensitivity of the detection method and the mass of analyte injected at the assay lower limit of quantitation (LLOQ).

Simultaneous determination of Aprepitant and two metabolites in human plasma by high-performance liquid chromatography with tandem mass spectrometric detection.

A method for the simultaneous determination of Aprepitant, I (5-[[2(R)-[1(R)-(3,5-bistrifluoromethylphenyl)ethoxy]-3(S)-(4-fluorophenyl) morpholin-4-yl]methyl]-2,4-dihydro-[1,2,4]triazol-3-one) and two active metabolites (II and III) in human plasma has been developed. The method was based on high-performance liquid chromatography (HPLC) with atmospheric pressure chemical ionization tandem mass spectrometric (APCI-MS-MS) detection in positive ionization mode using a heated nebulizer interface. The analytes and internal standard (IV) (Fig. 1) were isolated from basified plasma using liquid-liquid extraction. The organic extracts were dried, reconstituted in mobile phase and injected into the HPLC-MS/MS system. The analytes were chromatographed on a narrow bore (50 mm x 2.0 mm, 3 microm) Keystone Scientific's Prism R.P. analytical column, with mobile phase consisting of acetonitrile (ACN):water containing trifluoroacetic acid with pH adjusted to 3 (40:60, v/v) pumped at a flow rate of 0.5 ml/min. The MS-MS detection was performed on a Sciex API 3000 tandem mass spectrometer operated in selected reaction monitoring mode. The precursor-->product ion combinations of m/z 535-->277, 438-->180, 452-->223 and 503-->259 were used to quantify I, II, III, and IV, respectively, after chromatographic separation of the analytes. The assay was validated in the concentration range of 10-5000 ng/ml for I and II and 25-5000 ng/ml for III when 1 ml of plasma was processed. The precision of the assay (expressed as coefficient of variation, CV) was less than 10% at all concentrations within the standard curve range, with adequate assay accuracy. Matrix effect experiments were performed to demonstrate the absence of any significant change in ionization of the analytes when comparing neat standards to analytes in the presence of plasma matrix. This assay was utilized to support a clinical study where multiple oral doses of I were administered to healthy subjects to investigate the pharmacokinetics, safety, and tolerability of Aprepitant. Concentrations of the two most active metabolites, which if present in high concentrations would increase the neurokinin-1 (NK1) receptor occupancy level and therefore potentially contribute to the antiemetic action of Aprepitant, were determined.

The identification of three human metabolites of a peptide-doxorubicin conjugate using HPLC-MS-MS in positive and negative ionization modes.

A peptide-doxorubicin conjugate (I) is a drug candidate that has been evaluated for the treatment of prostate cancer. During the high-performance liquid chromatographic (HPLC)-fluorescence analysis of clinical samples for compound I and its two known metabolites [doxorubicin (II) and leucine-doxorubicin (III)], additional metabolites are observed in postdose human plasma extracts. Using neutral loss, precursor, and product ion tandem mass spectrometric (MS-MS) experiments, two of these metabolites are identified as doxorubicinol (IV) and leucine-doxorubicinol (V), the active 13-hydroxy metabolites of doxorubicin and leucine-doxorubicin, respectively. A third metabolite, 7-deoxydoxorubicinol aglycone (VI), is detected using single-ion monitoring at m/z 399 in the negative ionization mode. The product ion mass spectrum of this metabolite contains a major fragment at m/z 351, resulting from the loss of water and formaldehyde from the pseudomolecular ion. An HPLC-MS-MS method for simultaneous analysis of II, III, IV, V, and VI is developed utilizing gradient HPLC with a combination of positive/negative ionization MS in the multiple reaction monitoring mode and monitoring the appropriate MS-MS transitions. Using this methodology, rat, dog, and human plasma metabolite profiles are compared and found to be qualitatively similar. Simultaneous fluorescence and MS detection experiments confirm that the peaks observed in the HPLC-fluorescence chromatograms of plasma extracts correspond to each of the five metabolites (II-VI).

Determination of fexofenadine in human plasma using 96-well solid phase extraction and HPLC with tandem mass spectrometric detection.

A fast and sensitive HPLC-MS/MS method, utilizing atmospheric pressure chemical ionization, for the determination of fexofenadine in human plasma is described. A deuterated analog, d6-fexofenadine is used as the internal standard (IS). Plasma samples are prepared using 96-well solid phase extraction with plates containing Waters Oasis HLB sorbent. The analytes are chromatographed on a Restek Ultra IBD column (3.2 mm x 50 mm, 3 microm) using a mobile phase consisting of a mixture of 90% acetonitrile and 10% 10 mM ammonium acetate buffer and 0.1% formic acid. Quantitation of the analyte is based on the response from the multiple reaction monitoring of the precursor to product ion pairs for fexofenadine (m/z 502 --> 466) and d6-fexofenadine (m/z 508 --> 472). The assay has been validated over the concentration range of 1-200 ng/ml based on the analysis of 0.5 ml aliquots of plasma. Within-day assay accuracy was between 97 and 102% of nominal, while within-day precision was better than 3.5% CV at all points on the standard curve. Analyte extraction recovery was better than 70% over the range of the standard curve. The method was found to be suitable for the analysis of human plasma samples obtained 24 h following the administration of a single 60 mg dose of fexofenadine.

Determination of a novel substance P inhibitor in human plasma by high-performance liquid chromatography with atmospheric pressure chemical ionization mass spectrometric detection using single and triple quadrupole detectors.

Methods based on high-performance liquid chromatography (HPLC) with atmospheric-pressure chemical ionization (APCI) mass spectrometric (MS) detection using either single (MS) or triple (MS/MS) quadrupole mass spectrometric detection for the determination of (2R)-[1(R)-(3,5-bis-trifluoromethylphenyl)ethoxy]-3(S)-(4-fluoro-phenyl)morpholin-4-ylmethyl]-5-oxo-4,5-dihydro-[1,2,4]triazol)methyl morpholine (Aprepitant, Fig. 1) in human plasma has been developed. Aprepitant (I) and internal standard (II, Fig. 1) were isolated from the plasma matrix buffered to pH 9.8 using a liquid-liquid extraction with methyl-t-butyl ether (MTBE). The analytes were separated on a Keystone Scientific's Javelin BDS C-8 2 mm x 4.6 mm 3 microm guard column coupled to BDS C-8 50 mm x 4.6 mm 3 microm analytical column, utilizing a mobile phase of 50% acetonitrile and 50% water containing 0.1% formic acid and 10 mM ammonium acetate delivered at a flow rate of 1 ml/min. The single quadrupole instrument was operated in a single ion monitoring (SIM) mode analyzing the protonated molecules of Aprepitant and II at m/z 535 and 503, respectively. The triple quadrupole mass spectrometer was operated in multiple reaction monitoring mode (MRM) monitoring the precursor --> ion combinations of m/z 535 --> 277 and 503 --> 259 for Aprepitant and II, respectively. The linear calibration range for both single and triple quadrupole detectors was from 10 to 5000 ng/ml of plasma with coefficients of variation less than 8% at all concentrations. Both single and triple quadrupole instruments yielded similar precision and accuracy results. Matrix effect experiments performed on both instruments demonstrated the absence of any significant change in ionization of the analytes when comparing neat standards to analytes in the presence of plasma matrix. Both instruments were used successfully to support numerous clinical trials of Aprepitant.

Determination of a cyclooxygenase II inhibitor in human plasma by capillary gas chromatography with mass spectrometric detection.

Sensitive methods based on capillary gas chromatography (GC) with mass spectrometric (MS) detection in a selected-ion monitoring mode (SIM) for the determination of a cyclooxygenase II (COX-II) inhibitor (3-isopropoxy-4-(4-methanesulfonylphenyl)-5,5'-dimethyl-5H-furan-2-one, I) in human plasma, in two concentration ranges of 0.1-20 and 5-1000 ng/ml, are described. Following liquid-liquid extraction, the residue, after evaporation of the organic phase to dryness, was reconstituted in acetonitrile (20 l) and part of the extract (1 l) was analyzed by GC/MS/SIM. The drug (I) and internal standard (II) were separated on a 25 mx0.2 mm capillary column with HP Ultra 1 (100% dimethylpolysiloxane, 0.33 m) phase and analyzed by MS/SIM monitoring ions at m/z 237 and 282 for I and II, respectively. The standard curve was linear within the lower concentration range of 0.1-20 ng/ml and the lower limit of quantification (LLOQ) in plasma was 0.1 ng/ml. Intraday coefficients of variation (CV, n=5) were 8.9, 4.2, 5.7, 3.1, 1.9, 1.9, and 4.4% at 0.1, 0.2, 0.5, 1.0, 5.0, 10, and 20 ng/ml, respectively. The standard curve was also linear within the higher concentration range of 5-1000 ng/ml and the LLOQ in plasma was 5 ng/ml. Intraday coefficients of variation (CV, n=5) were all below 9% at all concentrations within the standard curve range. The accuracy for I in human plasma was 91-112% and the recovery of I and II was greater than 70% at all concentrations within both standard curve ranges. The details of the assay methodology are presented.

Determination of an endothelin receptor antagonist in rat plasma by radioimmunoassay.

A quantitative method based on radioimmunoassay for the determination of an endothelin receptor antagonist (C(31)H(33)NO(7), I) has been developed and validated. The immunogen was prepared by coupling I to the bovine serum albumin via the N-hydroxysuccinimide ester of I from which the radioligand was also prepared by the reaction with [125I]-iodotyrosine. The method was specific and no immunoactive material other than the parent drug was detectable in mammalian plasma. This direct assay, using 50 microl of rat plasma is sensitive (0.4 ng/ml), without matrix interference, and has sufficient sensitivity, specificity, accuracy and precision for the analysis of dosed rat plasma samples.

Isolation and structural characterization of the photolysis products of etoricoxib.

Etoricoxib is a potent and novel selective inhibitor of cyclooxygenase-2 (COX-2) which has been developed for the treatment of osteoarthritis, rheumatoid arthritis and several other inflammatory conditions. To support clinical pharmacokinetics studies, a method for the determination of etoricoxib in human plasma was developed. During the development of the method it was found that highly fluorescent products were formed when etoricoxib was exposed to UV light (254 nm). The formation of highly fluorescent products was the basis for the development of a highly sensitive HPLC/fluorescent assay for the indirect determination of etoricoxib in human plasma; the limit of quantification (LOQ) was 1 ng/mL. To unequivocally determine the chemical structures of the photolysis products of etoricoxib, a series of studies was conducted. When etoricoxib was irradiated online in a photochemical reactor, three products were detected in an HPLC-UV system. These products were characterized by HPLC-UV-fluorescence and HPLC-MS/MS. Possible structures of these products were proposed based on these data. The major photolysis products of etoricoxib were further isolated and their structures were elucidated using NMR and HPLC-NMR. The results of these experiments indicate that etoricoxib undergoes a photocyclization reaction when irradiated with UV light (254 nm), leading to the formation of two major isomeric photocyclization products.

Development and implementation of an electrochemiluminescence immunoassay for the determination of an angiogenic polypeptide in dog and rat plasma.

A quantitative method based on electrochemiluminescence immunoassay for the determination of the angiogenic agent aFGF-S117 has been developed and validated. Two polyclonal antibodies specific to aFGF-S117 and a wild-type aFGF antibody were selected for the analysis. The assay was based on the non-competitive sandwich immunoassay principle in which the drug is trapped with a biotinylated antibody that is immobilized on a streptavidin magnetic particle. The drug is then sandwiched with a ruthenium chelated second antibody. The assay demonstrates good accuracy and reproducibility at plasma concentration of 0.5 ng/ml.

Strategies for the assessment of matrix effect in quantitative bioanalytical methods based on HPLC-MS/MS.

In recent years, high-performance liquid chromatography (HPLC) with tandem mass spectrometric (MS/MS) detection has been demonstrated to be a powerful technique for the quantitative determination of drugs and metabolites in biological fluids. However, the common and early perception that utilization of HPLC-MS/MS practically guarantees selectivity is being challenged by a number of reported examples of lack of selectivity due to ion suppression or enhancement caused by the sample matrix and interferences from metabolites. In light of these serious method liabilities, questions about how to develop and validate reliable HPLC-MS/MS methods, especially for supporting long-term human pharmacokinetic studies, are being raised. The central issue is what experiments, in addition to the validation data usually provided for the conventional bioanalytical methods, need to be conducted to confirm HPLC-MS/MS assay selectivity and reliability. The current regulatory requirements include the need for the assessment and elimination of the matrix effect in the bioanalytical methods, but the experimental procedures necessary to assess the matrix effect are not detailed. Practical, experimental approaches for studying, identifying, and eliminating the effect of matrix on the results of quantitative analyses by HPLC-MS/MS are described in this paper. Using as an example a set of validation experiments performed for one of our investigational new drug candidates, the concepts of the quantitative assessment of the "absolute" versus "relative" matrix effect are introduced. In addition, experiments for the determination of, the "true" recovery of analytes using HPLC-MS/MS are described eliminating the uncertainty about the effect of matrix on the determination of this commonly measured method parameter. Determination of the matrix effect allows the assessment of the reliability and selectivity of an existing HPLC-MS/MS method. If the results of these studies are not satisfactory, the parameters determined may provide a guide to what changes in the method need to be made to improve assay selectivity. In addition, a direct comparison of the extent of the matrix effect using two different interfaces (a heated nebulizer, HN, and ion spray, ISP) under otherwise the same sample preparation and chromatographic conditions was made. It was demonstrated that, for the investigational drug under study, the matrix effect was clearly observed when ISP interface was utilized but it was absent when the HN interface was employed.

Determination of risedronate in human urine by column-switching ion-pair high-performance liquid chromatography with ultraviolet detection.

An HPLC assay for the determination of risedronate in human urine was developed and validated. Risedronate and the internal standard were isolated from 5-ml urine samples in a two-part procedure. First, the analytes were precipitated from urine along with endogenous phosphates as calcium salts by the addition of CaCl(2) at alkaline pH. The precipitate was then dissolved in 0.05 M ethylene glycol-bis(beta-aminoethyl ether)-N,N,N',N'-tetraacetic acid and subjected to ion-pair solid-phase extraction using a Waters HLB cartridge (1 ml, 30 mg) with 1-octyltriethylammonium phosphate as the ion-pair reagent. Following extraction, the analytes were initially separated from the majority of co-extracted endogenous components on a Waters X-Terra RP18 (4.6 x 50 mm, 3.5 microm) column. The effluent from the X-Terra was "heart-cut" onto a Phenomenex Synergi Polar RP (4.6 x 150 mm, 4 microm) column for final separation. UV detection (lambda=262 nm) was used to quantitate risedronate in the concentration range of 7.5-250 ng/ml. Mean recovery was 83.3% for risedronate and 86.5% for the internal standard. The intra-day precision of the assay, as assessed by replicate (n=5) standard curves, was better than 6% RSD for all points on the standard curve. Within-day accuracy for the standards ranged from 96.3 to 106.1% of nominal. Inter-day precision for quality controls assayed over a 3-week period was better than 5%, while inter-day accuracy was within 90% of nominal. The assay was employed to analyze samples collected during a clinical pharmacokinetics study.

Monolithic silica liquid chromatography columns for the determination of cyclooxygenase II inhibitors in human plasma.

Methods employing monolithic HPLC columns for the determination of the cyclooxygenase II inhibitors rofecoxib (I) and 3-isopropoxy-4-(4-methanesulfonylphenyl)-5,5'-dimethyl-5H-furan-2-one (DFP, III) in human plasma are described. Each analyte, together with an internal standard was extracted from the plasma matrix using solid-phase extraction in the 96-well format. The analytes were chromatographed on a Chromolith Speed Rod monolithic HPLC column (4.6 x 50 mm). Analyte detection for rofecoxib was via fluorescence following post-column photochemical derivatization. Detection for III was based on the native fluorescence of the compound. The precision, accuracy, and linearity of the methods were found to be comparable to those obtained using methods employing conventional packed HPLC columns. Use of the monolithic column permitted mobile phase flow-rates of up to 6.5 ml/min to be employed in the assays. The use of elevated flow-rates enabled the per sample analysis time to be reduced by up to a factor of 5 compared with assays based on packed HPLC columns. The results of experiments aimed at evaluating the ruggedness and reproducibility of monolithic columns employed in bioanalytical methods are presented.