Precise pitch-scaling of carbon nanotube arrays within three-dimensional DNA nanotrenches.

Precise fabrication of semiconducting carbon nanotubes (CNTs) into densely aligned evenly spaced arrays is required for ultrascaled technology nodes. We report the precise scaling of inter-CNT pitch using a supramolecular assembly method called spatially hindered integration of nanotube electronics. Specifically, by using DNA brick crystal-based nanotrenches to align DNA-wrapped CNTs through DNA hybridization, we constructed parallel CNT arrays with a uniform pitch as small as 10.4 nanometers, at an angular deviation <2° and an assembly yield >95%.

Flat Monolayer Graphene Cathodes for Li-Oxygen Microbatteries.

Miniature batteries can accelerate the development of mobile electronics by providing sufficient energy to power small devices. Typical microbatteries commonly use thin-film inorganic electrodes based on Li-ion insertion reaction. However, they rely on the complicated thin-film synthesis method of inorganics containing many elements. Graphene, one atomic layer thick carbon sheet, has diverse physical and chemical properties and is compatible with conventional micron-scale device fabrication. Here, we study the use of chemical vapor deposition (CVD) grown monolayer graphene in a two-dimensional configuration, as a future Li-oxygen microbattery cathode. By maximizing the dissolution of discharge intermediates, we obtain 2610 Ah/ggraphene of capacity corresponding to 20% higher areal cathode energy density and 2.7 times higher cathode specific energy than that can be derived from the same volume or mass of conventional Li-ion battery cathode material. Furthermore, a clear observation on the discharge reaction on composite electrodes and their role in the charging reaction was made, thanks to the two-dimensional monolayer graphene Li-oxygen battery cathode. We demonstrate an easy integration of two-dimensional CVD graphene cathode into microscale devices by simply transferring or coating the target device substrate with flexible graphene layers. The ability to integrate and use monolayer graphene on arbitrary device substrates as well as precise control over a chemical derivation of the carbon interface can have a radical impact on future energy-storage devices.

Biotemplating pores with size and shape diversity for Li-oxygen Battery Cathodes.

Synthetic porogens provide an easy way to create porous structures, but their usage is limited due to synthetic difficulties, process complexities and prohibitive costs. Here we investigate the use of bacteria, sustainable and naturally abundant materials, as a pore template. The bacteria require no chemical synthesis, come in variable sizes and shapes, degrade easier and are approximately a million times cheaper than conventional porogens. We fabricate free standing porous multiwalled carbon nanotube (MWCNT) films using cultured, harmless bacteria as porogens, and demonstrate substantial Li-oxygen battery performance improvement by porosity control. Pore volume as well as shape in the cathodes were easily tuned to improve oxygen evolution efficiency by 30% and double the full discharge capacity in repeated cycles compared to the compact MWCNT electrode films. The interconnected pores produced by the templates greatly improve the accessibility of reactants allowing the achievement of 4,942 W/kg (8,649 Wh/kg) at 2 A/ge (1.7 mA/cm2).

DNA-Directed Self-Assembly of Highly Ordered and Dense Single-Walled Carbon Nanotube Arrays.

Single-walled carbon nanotubes (SWNT or CNT) have unique and well-known high-performance material properties that can enable revolutionary increases in the performance of electronic devices and architectures. However, fabrication of large-scale SWNT-based ICs is an enormously challenging, unsolved problem, and self-assembly is likely needed for critical steps. Over the past several years, methods have been introduced to created ordered carbon nanotube structures using DNA guided self-assembly. In this chapter, we briefly review the challenges involved in using DNA to assemble SWNT nanostructures, and then give detailed methods to assemble dense, aligned SWNT arrays. In particular, we discuss the preparation of DNA wrapped single-walled nanotubes (DNA-CNTs) using commercial carbon nanotube products that are suitable for electronics applications. Then, we discuss methods to characterize DNA-CNTs using fluid mode atomic force microscopy (AFM). Finally, we give detailed procedures for assembly of DNA-CNTs into dense parallel arrays via linker induced surface assembly (LISA).

Supramolecular high-aspect ratio assemblies with strong antifungal activity.

Efficient and pathogen-specific antifungal agents are required to mitigate drug resistance problems. Here we present cationic small molecules that exhibit excellent microbial selectivity with minimal host toxicity. Unlike typical cationic polymers possessing molecular weight distributions, these compounds have an absolute molecular weight aiding in isolation and characterization. However, their specific molecular recognition motif (terephthalamide-bisurea) facilitates spontaneous supramolecular self-assembly manifesting in several polymer-like properties. Computational modelling of the terephthalamide-bisurea structures predicts zig-zag or bent arrangements where distal benzyl urea groups stabilize the high-aspect ratio aqueous supramolecular assemblies. These nanostructures are confirmed by transmission electron microscopy and atomic force microscopy. Antifungal activity against drug-sensitive and drug-resistant strains with in vitro and in vivo biocompatibility is observed. Additionally, despite repeated sub-lethal exposures, drug resistance is not induced. Comparison with clinically used amphotericin B shows similar antifungal behaviour without any significant toxicity in a C. albicans biofilm-induced mouse keratitis model.

Broad-spectrum antimicrobial supramolecular assemblies with distinctive size and shape.

With the increased prevalence of antibiotic-resistant infections, there is an urgent need for innovative antimicrobial treatments. One such area being actively explored is the use of self-assembling cationic polymers. This relatively new class of materials was inspired by biologically pervasive cationic host defense peptides. The antimicrobial action of both the synthetic polymers and naturally occurring peptides is believed to be complemented by their three-dimensional structure. In an effort to evaluate shape effects on antimicrobial materials, triblock polymers were polymerized from an assembly directing terephthalamide-bisurea core. Simple changes to this core, such as the addition of a methylene spacer, served to direct self-assembly into distinct morphologies-spheres and rods. Computational modeling also demonstrated how subtle core changes could directly alter urea stacking motifs manifesting in unique multidirectional hydrogen-bond networks despite the vast majority of material consisting of poly(lactide) (interior block) and cationic polycarbonates (exterior block). Upon testing the spherical and rod-like morphologies for antimicrobial properties, it was found that both possessed broad-spectrum activity (Gram-negative and Gram-positive bacteria as well as fungi) with minimal hemolysis, although only the rod-like assemblies were effective against Candida albicans.

DNA-linker-induced surface assembly of ultra dense parallel single walled carbon nanotube arrays.

Ultrathin film preparations of single-walled carbon nanotube (SWNT) allow economical utilization of nanotube properties in electronics applications. Recent advances have enabled production of micrometer scale SWNT transistors and sensors but scaling these devices down to the nanoscale, and improving the coupling of SWNTs to other nanoscale components, may require techniques that can generate a greater degree of nanoscale geometric order than has thus far been achieved. Here, we introduce linker-induced surface assembly, a new technique that uses small structured DNA linkers to assemble solution dispersed nanotubes into parallel arrays on charged surfaces. Parts of our linkers act as spacers to precisely control the internanotube separation distance down to <3 nm and can serve as scaffolds to position components such as proteins between adjacent parallel nanotubes. The resulting arrays can then be stamped onto other substrates. Our results demonstrate a new paradigm for the self-assembly of anisotropic colloidal nanomaterials into ordered structures and provide a potentially simple, low cost, and scalable route for preparation of exquisitely structured parallel SWNT films with applications in high-performance nanoscale switches, sensors, and meta-materials.

Self-assembly of carbon nanotubes into two-dimensional geometries using DNA origami templates.

A central challenge in nanotechnology is the parallel fabrication of complex geometries for nanodevices. Here we report a general method for arranging single-walled carbon nanotubes in two dimensions using DNA origami-a technique in which a long single strand of DNA is folded into a predetermined shape. We synthesize rectangular origami templates ( approximately 75 nm x 95 nm) that display two lines of single-stranded DNA 'hooks' in a cross pattern with approximately 6 nm resolution. The perpendicular lines of hooks serve as sequence-specific binding sites for two types of nanotubes, each functionalized non-covalently with a distinct DNA linker molecule. The hook-binding domain of each linker is protected to ensure efficient hybridization. When origami templates and DNA-functionalized nanotubes are mixed, strand displacement-mediated deprotection and binding aligns the nanotubes into cross-junctions. Of several cross-junctions synthesized by this method, one demonstrated stable field-effect transistor-like behaviour. In such organizations of electronic components, DNA origami serves as a programmable nanobreadboard; thus, DNA origami may allow the rapid prototyping of complex nanotube-based structures.