Application of pressurized fluid extraction to determine cadmium and zinc in plants.

A procedure for the determination of Cd and Zn in plants is proposed. The metals are extracted by pressurized fluid extraction (PFE). Operational conditions are: pressure 1500 psi, temperature 75 degrees C, static time 5 min, flush volume 35%, purge time 60s, cycles 1 and 1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid (CDTA) 0.01M at pH 4.5 as extracting solution. Determination of Zn is carried out by flame atomic absorption spectroscopy and depending on the concentration level, Cd content is determined by flame or electrothermal atomic absorption spectroscopy. Certified samples of Virginia tobacco leaves, tea leaves, spinach leaves, poplar leaves, a commercial spinach sample (Spinacea oleracea) and genetically modified Arabidopsis thaliana were analysed by the proposed procedure and also by microwave acid digestion and extraction with HCl-Triton X-100. Confidence intervals for Cd and Zn content obtained by the proposed procedure overlap with the certified values. The other procedures, however, provide inaccurate results for Cd. Recoveries obtained for a confidence level of 95% are 96+/-6% and 95+/-5% for Zn and Cd, respectively. Reproducibility of Zn by the proposed procedure is 7% (n=8), similar to the other tests and the detection limit is 2.6 microg. For Cd reproducibility is 8.5% (n=8), better than with HCl-Triton X-100 and similar to acid digestion, the detection limit is 3.5 ng of Cd.

Desorption of BTEX from activated charcoal using accelerated solvent extraction: evaluation of occupational exposures.

A procedure for the determination of benzene, toluene, ethylbenzene and o-xylene, m-xylene and p-xylene (BTEX) in occupational environments is proposed. These compounds are extracted from activated charcoal using accelerated solvent extraction. Operational parameters are optimized and quantitative recovery is obtained using acetonitrile as the extraction solvent and 1-mL extraction cells, a preheat time of 2 min, a temperature of 160 degrees C, a pressure of 1,500 psi, a static period of 5 min, a flush volume of 110%, two cycles and a purge time of 90 s. Determination of BTEX compounds is carried out by gas chromatography using a flame ionization detector. The recoveries, obtained for a confidence level of 95%, are 91 +/- 4, 100 +/- 3, 104 +/- 2, 93 +/- 4, 99 +/- 2 and 99 +/- 2% for benzene, toluene, ethylbenzene, o-xylene, m-xylene and p-xylene, respectively. The detection limits are 0.5 microg for benzene, 0.7 microg for toluene and 1.0 microg for the other compounds. The proposed procedure has been applied to real samples collected in several workplaces, like a microbiology laboratory, an analytical chemistry laboratory, a printer's, a car repair shop and a petrol station. From the results obtained, it can be concluded that the occupational exposures determined are always acceptable because they are lower than the tenth part of the recommended exposure limits (VLA-ED and VLA-EC).

Detection of bias errors in ETAAS Determination of copper in beer and wine samples.

A method that evidences changes in the shape of the absorbance profiles obtained by graphite furnace atomic absorption spectrometry (ETAAS) is proposed. The method is based upon the apparent content curves model previously described for molecular spectroscopy and it permits the detection of possible sources of bias errors. Moreover, a procedure that allows to detect the existence of constant and/or proportional errors is also described. Both models has been applied to the determination of copper in wine and beer samples with and without pre-treatment of the samples. Results obtained evidence the usefulness of the proposed models.

Characterisation of quaternary mixtures by the apparent content curves method: identification of tocopherols in vegetable oils.

A procedure for identification of the compounds in quaternary mixtures has been developed. The proposed procedure is based on the apparent content curves method. From these curves and using the Q parameter, work conditions are selected and quaternary mixtures treated as "pseudoternary" mixtures.A simple strategy to test matrix effects at working wavelengths has been developed, identification limits established and following the identification table quaternary mixtures were easily characterised. The procedure has been applied to the identification of phenols in mixtures by UV-visible spectrophotometry and tocopherols in edible oils by fluorimetry. Results obtained for edible oils are in agreement with the composition obtained by use of the reference method.

Spectrophotometric determination of chromium with diphenylcarbazide in the presence of vanadium, molybdenum, and iron after separation by solid-phase extraction.

A method has been developed for the determination of chromium in presence of V(V), Mo(VI), and Fe(III). The effects of interferences were evaluated by using the apparent content curves method, and their separation was performed by solid-phase extraction with an anionic exchanger. The sample-treatment conditions and the influence of the sample conductivity were studied. Tolerance limits were established, and the proposed procedure was used to determine chromium in certified samples and for speciation of chromium in waste water. Our results were always in agreement with the theoretical content.

Application of ACC method to synchronous luminiscence: determination of alpha-tocopherol and alpha-tocopheryl acetate in beverages.

A new method based on the Q parameter, that permits the determination of the C(compound A)/C(compound B) ratio without preparing calibration graphs of the two compounds, is proposed. This method has been applied to signals obtained by synchronous luminiscence. Simultaneous determination of alpha-tocopherol and alpha-tocopheryl acetate in beverages using synchronous fluorescence has been carried out. To isolate the compounds from samples, liquid extraction with n-hexane as the organic phase was employed. The presence of interferences was tested using the apparent content curves (ACC) method and the C(alpha-tocopherol)/C(alpha-tocopheryl acetate) ratio was calculated using the Q parameter. The reproducibility and detection limit for the determination of alpha-tocopherol and alpha-tocopheryl acetate were 6.6% and 0.016 mg/L and 1.8% and 0.017 mg/L, respectively.

Preconcentration and speciation of chromium in waters using solid-phase extraction and atomic absorption spectrometry.

A method for the preconcentration and speciation of chromium was developed. After formation of an anionic compound with ethylenediaminetetraacetic acid (CrY(-)), Cr (VI) and Cr (III) are retained on a strong anionic phase (SAX) and controlled elution with 0.5 M NaCl permits their speciation. The retention and elution conditions were optimised, and interferences due to the presence of other ions such as Mg(II), Mn(II), Sn(II), Fe(III), Ba(II), Al(III), Ca(II), chloride, iodine, bromide, fluoride, sulphate, phosphate, bicarbonate and nitrate were studied. The detection limits were 0.4 mug l(-1) and 1.1 mug l(-1) for Cr(III) and Cr(VI), respectively, and reproducibility was 9%. The results obtained for speciation of chromium by the proposed method in wastewaters are in agreement with the values obtained by a reference method for a 95% confidence level.