Microplastics in wastewater and sludge from centralized and decentralized wastewater treatment plants: Effects of treatment systems and microplastic characteristics.

Domestic wastewater treatment plants (WWTPs) play a vital role in limiting the release of microplastics (MP) into the environment. This study examined MP removal efficiency from five centralized and four decentralized domestic WWTPs in Bangkok, Thailand. MP concentrations in wastewater and sludge were comparable between centralized and decentralized WWTPs, despite these decentralized WWTPs serving smaller populations and having limited treatment capacity. The elimination of MPs ranged from 50 to 96.8% in centralized WWTPs and 14.2-53.6% in decentralized WWTPs. It is noted that the retained MPs concentrations in sludge ranged from 20,000 to 228,100 MP/kg dry weight. The prevalence of synthetic fibers and fragments could be attributed to their pathways from laundry or car tires, and the accidental release of a variety of plastic wastes ended up in investigated domestic WWTPs. Removal of MPs between the centralized and decentralized WWTPs was influenced by several impact factors including initial MP concentrations, longer retention times, MP fragmentation, and variations of MP concentrations in sludge leading to different activated sludge process configurations. Sewage sludge has become a primary location for the accumulation of incoming microplastics in WWTPs. The MPs entering and leaving each unit process were varied due to the unique characteristics of MPs, and their different treatment efficiencies. While the extended hydraulic retention period in decentralized WWTPs decreased the MP removal efficacy, the centralized WWTP with the two-stage activated sludge process achieved the highest MP removal efficiency.

Rapid and efficient removal of organic matter from sewage sludge for extraction of microplastics.

Microplastic pollution is recognized as an emerging global issue; however, no standardized method for the extraction of these pollutants from the environment currently exists and existing methods are ineffective for specific environmental matrices. An appropriate organic matter removal method is essential for the extraction of microplastics from organic-rich sludge to minimize interference during their identification and enhance compatibility of the identification steps. The present study aimed to establish an effective technique for the digestion of organic matter-rich sludge using hydrogen peroxide and Fenton's reagent at varying temperatures, times, and concentrations of an iron catalyst. The organic matter removal efficiency of the five protocols utilized varied from 81.5 % to 87.1 %. Polymers such as polyvinyl chloride (PVC), high density polyethylene (HDPE), low density polyethylene (LDPE), polypropylene (PP), and polystyrene (PS) retained most of their physical and chemical properties after the treatments, with minor changes in the surface area, weight, and FTIR spectra properties. Polyethylene terephthalate (PET), PET fiber, polyamide (PA) fiber, and polymethyl methacrylate (PMMA) fiber were significantly degraded via treating with H2O2 at 50 °C for 24 h. Protocol 4, treating with Fenton's reagent (H2O2 (30 %) + (0.05 M) FeSO4.7H2O) at 50 °C for 1 h is proposed as a rapid and effective method for the removal of organic matter from sludge. In addition to its rapidity, this method minimally impacts most polymers, and its high organic matter removal efficiency is associated with a significant reduction of suspended solids in sludge. The present study provides a validated approach that facilitates as an effective organic removal step during the extraction of MPs in sludge.