H+-Conducting Aromatic Multiblock Copolymer and Blend Membranes and Their Application in PEM Electrolysis.

As an alternative to common perfluorosulfonic acid-based polyelectrolytes, we present the synthesis and characterization of proton exchange membranes based on two different concepts: (i) Covalently bound multiblock-co-ionomers with a nanophase-separated structure exhibit tunable properties depending on hydrophilic and hydrophobic components' ratios. Here, the blocks were synthesized individually via step-growth polycondensation from either partially fluorinated or sulfonated aromatic monomers. (ii) Ionically crosslinked blend membranes of partially fluorinated polybenzimidazole and pyridine side-chain-modified polysulfones combine the hydrophilic component's high proton conductivities with high mechanical stability established by the hydrophobic components. In addition to the polymer synthesis, membrane preparation, and thorough characterization of the obtained materials, hydrogen permeability is determined using linear sweep voltammetry. Furthermore, initial in situ tests in a PEM electrolysis cell show promising cell performance, which can be increased by optimizing electrodes with regard to binders for the respective membrane material.

Platinum Dissolution in Realistic Fuel Cell Catalyst Layers.

Pt dissolution has already been intensively studied in aqueous model systems and many mechanistic insights have been gained. Nevertheless, transfer of new knowledge to real-world fuel cell systems is still a significant challenge. To close this gap, we present a novel in situ method combining a gas diffusion electrode (GDE) half-cell with inductively coupled plasma mass spectrometry (ICP-MS). With this setup, Pt dissolution in realistic catalyst layers and the transport of dissolved Pt species through Nafion membranes were evaluated directly. We observed that 1) specific Pt dissolution increased significantly with decreasing Pt loading, 2) in comparison to experiments on aqueous model systems with flow cells, the measured dissolution in GDE experiments was considerably lower, and 3) by adding a membrane onto the catalyst layer, Pt dissolution was reduced even further. All these phenomena are attributed to the varying mass transport conditions of dissolved Pt species, influencing re-deposition and equilibrium potential.

Photocorrosion of WO3 Photoanodes in Different Electrolytes.

Photocorrosion of an n-type semiconductor is anticipated to be unfavorable if its decomposition potential is situated below its valence band-edge position. Tungsten trioxide (WO3) is generally considered as a stable photoanode for different photoelectrochemical (PEC) applications. Such oversimplified considerations ignore reactions with electrolytes added to the solvent. Moreover, kinetic effects are neglected. The fallacy of such approaches has been demonstrated in our previous study dealing with WO3 instability in H2SO4. In this work, in order to understand parameters influencing WO3 photocorrosion and to identify more suitable reaction environments, H2SO4, HClO4, HNO3, CH3O3SH, as electrolytes are considered. Model WO3 thin films are fabricated with a spray-coating process. Photoactivity of the samples is determined with a photoelectrochemical scanning flow cell. Photostability is measured in real time by coupling an inductively coupled plasma mass spectrometer to the scanning flow cell to determine the photoanode dissolution products. It is found that the photoactivity of the WO3 films increases as HNO3 < HClO4 ≈ H2SO4 < CH3O3SH, whereas the photostability exhibits the opposite trend. The differences observed in photocorrosion are explained considering stability of the electrolytes toward decomposition. This work demonstrates that electrolytes and their reactive intermediates clearly influence the photostability of photoelectrodes. Thus, the careful selection of the photoelectrode/electrolyte combination is of crucial importance in the design of a stable photoelectrochemical water-splitting device.