Application of vibrational and fluorescence spectroscopy to the compositional analysis of colored-flesh potatoes.

BACKGROUND: Determination of composition and physicochemical parameters of natural products requires dedicated, often laborious and expensive, analytical protocols. Different spectroscopic techniques, in conjunction with chemometrics, seem to have a considerable potential in direct analysis of raw plant material and foods, without any chemical treatment. RESULTS: Fluorescence spectroscopy and three vibrational spectroscopy techniques were applied to determine total polyphenol content, antioxidant activity and macronutrient levels in red- and purple-fleshed potato varieties. Excitation-emission matrix fluorescence, Fourier transform Raman, attenuated total reflection Fourier transform infrared and near-infrared spectra were recorded for the freeze-dried samples. Combining spectral data and the results of reference analyses, partial least squares regression models were constructed for each parameter studied. For polyphenols and antioxidant activity, quantification errors found for validation samples amounted to 3.74-5.04% and 4.75-6.35%, respectively, whereas macronutrient analysis gave errors in the 3.45-4.55%, 3.09-5.30% and 5.10-8.58% ranges for starch, protein and sugar determinations, respectively. CONCLUSION: The obtained results demonstrate that different spectroscopic techniques in combination with multivariate modeling allow simultaneous determination of various parameters of plant samples based on a single sample spectrum. They can effectively replace commonly used protocols of food product analysis requiring sample dissolving and extraction of the compounds of interest. © 2023 Society of Chemical Industry.

State of water in various environments: Aliphatic ketones. MIR/NIR spectroscopic, dielectric and theoretical studies.

This work provides new insight into the state of water in a series of aliphatic ketones. For our studies, we selected nine aliphatic ketones of different size and structure to examine the effect of various structural motifs on behavior of water in the mixtures. Our results reveal that conformational flexibility of aliphatic chains in the linear ketones allows for effective shielding of the carbonyl group, and this flexibility is the main reason for poor solubility of water. Hence, in the linear ketones molecules of water are involved mostly in ketone-water interactions, while the water-water interactions are rare. Higher solubility of water in the cyclic ketones allows for creation of clusters of water, where the molecules are in water-like environment. The temperature rise in wet cyclic ketones increases population of ketone-water interactions at the expense of the water-water ones, while in the linear ketones and 2,6-dimethylcyclohexanone at an elevated temperature there is an increase in the population of singly bonded water at the expense of the doubly bonded one. DFT calculations reveal that the substitution of cyclohexanone by a single methyl group does not affect the strength of the ketone-water interactions, while it has a significant impact on the solubility of water in the ketone. The most important conclusion from this study is that the accessibility of the carbonyl group is the most important factor determining the intermolecular interactions and solubility of water in aliphatic ketones.

Quantitative Determination of Diosmin in Tablets by Infrared and Raman Spectroscopy.

Diosmin is widely used in the treatment of chronic venous diseases and hemorrhoids. Based on Raman and infrared reflection spectra of powdered tablets in the mid- and near-infrared regions and results of reference high-performance liquid chromatographic analysis, partial least squares models that enable fast and reliable quantification of the studied active ingredient in tablets, without the need for extraction, were elaborated. Eight commercial preparations containing diosmin in the 66-92% (w/w) range were analyzed. In order to assess and compare the quality of the developed chemometric models, the relative standard errors of prediction for calibration and validation sets were calculated. We found these errors to be in the 1.0-2.4% range for the three spectroscopic techniques used. Diosmin content in the analyzed preparations was obtained with recoveries in the 99.5-100.5% range.

Quantification of Salicylates and Flavonoids in Poplar Bark and Leaves Based on IR, NIR, and Raman Spectra.

Poplar bark and leaves can be an attractive source of salicylates and other biologically active compounds used in medicine. However, the biochemical variability of poplar material requires a standardization prior to processing. The official analytical protocols used in the pharmaceutical industry rely on the extraction of active compounds, which makes their determination long and costly. An analysis of plant materials in their native state can be performed using vibrational spectroscopy. This paper presents for the first time a comparison of diffuse reflectance in the near- and mid-infrared regions, attenuated total reflection, and Raman spectroscopy used for the simultaneous determination of salicylates and flavonoids in poplar bark and leaves. Based on 185 spectra of various poplar species and hybrid powdered samples, partial least squares regression models, characterized by the relative standard errors of prediction in the 4.5-9.9% range for both calibration and validation sets, were developed. These models allow for fast and precise quantification of the studied active compounds in poplar bark and leaves without any chemical sample treatment.

ATR-IR Spectroscopy Application to Diagnostic Screening of Advanced Endometriosis.

Endometriosis is one of the most common gynecological diseases among young women of reproductive age. Thus far, it has not been possible to define a parameter that is sensitive and specific enough to be a recognized biomarker for diagnosing this disease. Nonspecific symptoms of endometriosis and delayed diagnosis are impulses for researching noninvasive methods of differentiating endometriosis from other gynecological disorders. We compared three groups of individuals in our research: women with endometriosis (E), patients suffering from other gynecological disorders (nonendometriosis, NE), and healthy women from the control group (C). Partial least squares discriminant analysis (PLS-DA) models were developed based on selected serum biochemical parameters, specific regions of the serum's infrared attenuated total reflectance (FTIR ATR) spectra, and combined data. Incorporating the spectral data into the models significantly improved differentiation among the three groups, with an overall accuracy of 87.5%, 97.3%, and 98.5%, respectively. This study shows that infrared spectroscopy and discriminant analysis can be used to differentiate serum samples among women with advanced endometriosis, women without this disease, i.e., healthy women, and, most importantly, also women with other benign gynecological disorders.

Antioxidant and Antiglycation Effects of Cistus × incanus Water Infusion, Its Phenolic Components, and Respective Metabolites.

Reactive oxygen and carbonyl species promote oxidative and carbonyl stress, and the development of diabetes, metabolic syndrome, cardiovascular diseases, and others. The traditional herb Cistus × incanus is known for its antioxidant properties; therefore, the current study aimed to assess how the chemical composition of a C. incanus water infusion corresponds with its antioxidative and antiglycative effects in vitro. The composition of infusions prepared from commercial products was analyzed with UHPLC-ESI-qTOF-MS. Total phenolics, flavonoids, and non-flavonoid polyphenols were determined. Antioxidant activity of infusions and selected polyphenols was investigated using DPPH, ABTS, and FRAP. Fluorometric measurements and methylglyoxal capture were performed to investigate the antiglycation activity. PCA and PLS-DA models were applied to explore the correlation between chemical and antioxidant results. The principal flavonoids in C. incanus were flavonols. In vitro tests revealed that a stronger antioxidant effect was demonstrated by plant material from Turkey rich in flavonoids, followed by Albania and Greece. Flavonols and ellagic acid displayed stronger antiradical and reducing power than EA-derived urolithins. Hyperoside was the most potent inhibitor of glycation. The results indicate that flavonoids are primarily responsible for rock rose antioxidant and antiglycation properties. PLS-DA modeling can be used to identify the origin of plant material with sensitivity and specificity exceeding 86%.

Quantitative Determination of Polyphenols and Flavonoids in Cistus × incanus on the Basis of IR, NIR and Raman Spectra.

Cistus is a plant that has been used in natural medicine for hundreds of years; it works primarily as an antioxidant and cleansing agent. Cistus × incanus leaves or herb can be an attractive source of polyphenols and flavonoids. The official protocols of active compound analysis relies on the extraction of compounds of interest from plant matter, which makes their determination long and costly. An analysis of plant material in its native state can be performed using vibrational spectroscopy. This paper presents a comparison of Raman spectroscopy, attenuated total reflection in mid-infrared and diffuse reflectance technique in the near-infrared region for the simultaneous quantification of total polyphenols (TPC) and flavonoids (TF) content, as well as the determination of FRAP antioxidant activity of C. incanus material. Utilizing vibrational spectra and using partial least squares algorithm, TPC and TF were quantified with the RSEPVAL errors in the 2.7-5.4% range, while FRAP antioxidant activity for validation sets was determined with relative errors ranged from 5.2 to 9.3%. For the analyzed parameters, the lowest errors of predictions were computed for models constructed using Raman data. The developed models allow for fast and precise quantification of the studied active compounds in C. incanus material without any chemical sample treatment.

Anharmonicity and Spectra-Structure Correlations in MIR and NIR Spectra of Crystalline Menadione (Vitamin K3).

Mid-infrared (MIR) and near-infrared (NIR) spectra of crystalline menadione (vitamin K3) were measured and analyzed with aid of quantum chemical calculations. The calculations were carried out using the harmonic approach for the periodic model of crystal lattice and the anharmonic DVPT2 calculations applied for the single molecule model. The theoretical spectra accurately reconstructed the experimental ones permitting for reliable assignment of the MIR and NIR bands. For the first time, a detailed analysis of the NIR spectrum of a molecular system based on a naphthoquinone moiety was performed to elucidate the relationship between the chemical structure of menadione and the origin of the overtones and combination bands. In addition, the importance of these bands during interpretation of the MIR spectrum was demonstrated. The overtones and combination bands contribute to 46.4% of the total intensity of menadione in the range of 3600-2600 cm-1. Evidently, these bands play a key role in shaping of the C-H stretching region of MIR spectrum. We have shown also that the spectral regions without fundamentals may provide valuable structural information. For example, the theoretical calculations reliably reconstructed numerous overtones and combination bands in the 4000-3600 and 2800-1800 cm-1 ranges. These results, provide a comprehensive origin of the fundamentals, overtones and combination bands in the NIR and MIR spectra of menadione, and the relationship of these spectral features with the molecular structure.

Modeling of Antioxidant Activity, Polyphenols and Macronutrients Content of Bee Pollen Applying Solid-State 13C NMR Spectra.

An application of solid 13C nuclear magnetic resonance (NMR) spectroscopy for the determination of macronutrients, total polyphenols content, antioxidant activity, N C S elements, and pH in commercially available bee pollens is reported herein. Solid-state 13C NMR spectra were recorded for homogenized pollen granules without chemical treatment or dissolution of samples. By combining spectral data with the results of reference analyses, partial least squares models were constructed and validated separately for each of the studied parameters. To characterize and compare the models' quality, the relative standard errors of prediction (RSEP) were calculated for calibration and validation sets. In the case of the analysis of protein, fat and reducing sugars, these errors were in the 1.8-2.5% range. Modeling the elemental composition of bee pollen on the basis of 13C NMR spectra resulted in RSEPcal/RSEPval values of 0.3/0.6% for the sum of NHCS elements, 0.3/0.4% for C, 1.8/1.9% for N, and 4.2/6.1% for S quantification. Analyses of total phenolics and ABTS antioxidant activity resulted in RSEP values in the 2.7-3.5% and 2.8-3.8% ranges, respectively, whereas they were 1.4-2.1% for pH. The obtained results demonstrate the usefulness of 13C solid-state NMR spectroscopy for direct determination of various important physiochemical parameters of bee pollen.

Determination of nutritional parameters of bee pollen by Raman and infrared spectroscopy.

Vibrational spectroscopy was applied to determine macronutrient levels, total polyphenols (TPs) content, antioxidant activity, pH and color parameters in bee pollens. Raman, attenuated total reflection and diffuse reflectance spectra in the mid- and near-infrared regions were recorded for the homogenized pollen granules. Combining spectral data and the results of reference analyses, partial least squares (PLS) models were constructed and validated. The relative standard errors of prediction (RSEP) were calculated for the calibration and validation sets. Regarding macronutrient analysis, the latter were found to be in the 1.7-2.3%, 2.5-3.6% and 2.6-3.3% ranges for protein, reducing sugars and fat determination, respectively. These errors amounted to 3.1-3.5% for TPs and 2.2-3.4% for antioxidant activity quantification, respectively, whereas they were found to be in the 1.5-2.3% and 1.6-3.2% ranges for pH and the color parameters' determination.

Quantification of active ingredients in Potentilla tormentilla by Raman and infrared spectroscopy.

The most important active compounds present in Potentilla tormentilla rhizomes were quantitatively determined on the basis of Raman, attenuated total reflection (ATR) and diffuse reflectance mid- and near- infrared spectra (DRIFTS) collected for the untreated plant material. Partial least-squares (PLS) models were constructed utilizing vibrational spectra and the results of reference high-performance liquid chromatography analyses. Applying Raman spectroscopy, total polyphenols, tannins, ellagitannins, procyanidins, agrimoniin, 3-O-galloylquininc acid and catechin were simultaneously quantified in tormentil rhizomes, with the relative standard errors of prediction in the 2.0-4.9% range for both calibration and validation sets. These error ranges were found to be slightly higher for infrared techniques and amounted to 2.7-6.5%.

Determination of nutritional parameters of yoghurts by FT Raman spectroscopy.

FT-Raman quantitative analysis of nutritional parameters of yoghurts was performed with the help of partial least squares models. The relative standard errors of prediction for fat, lactose and protein determination in the quantified commercial samples equalled to 3.9, 3.2 and 3.6%, respectively. Models based on attenuated total reflectance spectra of the liquid yoghurt samples and of dried yoghurt films collected with the single reflection diamond accessory showed relative standard errors of prediction values of 1.6-5.0% and 2.7-5.2%, respectively, for the analysed components. Despite a relatively low signal-to-noise ratio in the obtained spectra, Raman spectroscopy, combined with chemometrics, constitutes a fast and powerful tool for macronutrients quantification in yoghurts. Errors received for attenuated total reflectance method were found to be relatively higher than those for Raman spectroscopy due to inhomogeneity of the analysed samples.

Microheterogeneity in binary mixtures of water with CH3OH and CD3OH: ATR-IR spectroscopic, chemometric and DFT studies.

Here we report ATR-IR spectroscopic study on the separation at a molecular level (microheterogeneity) and the degree of deviation of H2O/CH3OH and H2O/CD3OH mixtures from the ideal mixture. Of particular interest is the effect of isotopic substitution in methyl group on molecular structure and interactions in both mixtures. To obtain comprehensive information from the multivariate data we applied the excess molar absorptivity spectra together with two-dimensional correlation analysis (2DCOS) and chemometric methods. In addition, the experimental results were compared and discussed with the structures of various model clusters obtained from theoretical (DFT) calculations. Our results evidence the presence of separation at a molecular level and deviation from the ideal mixture for both mixtures. The experimental and theoretical results show that the maximum of these deviations appears at equimolar mixture. Both mixtures consist of three kinds of species: homoclusters of water and methanol and mixed clusters (heteroclusters). The heteroclusters exist in the whole range of mole fractions with the maximum close to the equimolar mixture. At this mixture composition near 55-60% of molecules are involved in heteroclusters. In contrast, the homoclusters of water occur in a limited range of mole fractions (XME < 0.85-0.9). Upon mixing the molecules of methanol form weaker hydrogen bonding as compared with the pure alcohol. In contrast, the molecules of water in the mixture are involved in stronger hydrogen bonding than those in bulk water. All these results indicate that both mixtures have similar degree of deviation from the ideal mixture.

Microheterogeneity in CH3OH/CD3OH mixture.

Recently, we demonstrated the presence of microheterogeneity in binary mixtures of unlike alcohols. [RSC Adv. 2016, 6, 37195-37202] The aim of this work was examination if this phenomenon occurs also in the mixture of very similar alcohols like CH3OH and CD3OH. Theoretical calculations suggest that the isotopic substitution in methyl group influences properties of the OH group. Hence, one can expect that this effect may lead to partial separation of CH3OH and CD3OH at a molecular level and it contributes to deviation from the ideal mixture. This work evidences that CH3OH/CD3OH mixture also deviates from the ideal one, but the extent of this deviation is much smaller as compared with the mixtures of other alcohols. It is of particular note that this deviation results mainly from the difference between the CH3 and CD3 groups, while the contribution from the OH groups is small. The structure of CH3OH/CD3OH mixture at a molecular level is similar to the structure of binary mixtures of other alcohols. The mixture is composed of the homoclusters of both alcohols and the mixed clusters. The homoclusters existing in the mixture are similar to those present in bulk alcohols. The highest population of the heteroclusters and the largest deviation from the ideal mixture were observed at equimolar mixture. Both the experimental and theoretical results reveal that in CH3OH/CD3OH mixture dominate the cyclic tetramers and larger clusters, while the population of the linear clusters is negligible. Though the extent and strength of hydrogen bonding in both alcohols are the same, the position and intensity of the 2ν(OH) band for CH3OH and CD3OH are different. We propose possible explanation of this observation.

Connecting the Molecular Structure of Cutin to Ultrastructure and Physical Properties of the Cuticle in Petals of Arabidopsis.

The plant cuticle is laid down at the cell wall surface of epidermal cells in a wide variety of structures, but the functional significance of this architectural diversity is not yet understood. Here, the structure-function relationship of the petal cuticle of Arabidopsis (Arabidopsis thaliana) was investigated. Applying Fourier transform infrared microspectroscopy, the cutin mutants long-chain acyl-coenzyme A synthetase2 (lacs2), permeable cuticle1 (pec1), cyp77a6, glycerol-3-phosphate acyltransferase6 (gpat6), and defective in cuticular ridges (dcr) were grouped in three separate classes based on quantitative differences in the ν(C=O) and ν(C-H) band vibrations. These were associated mainly with the quantity of 10,16-dihydroxy hexadecanoic acid, a monomer of the cuticle polyester, cutin. These spectral features were linked to three different types of cuticle organization: a normal cuticle with nanoridges (lacs2 and pec1 mutants); a broad translucent cuticle (cyp77a6 and dcr mutants); and an electron-opaque multilayered cuticle (gpat6 mutant). The latter two types did not have typical nanoridges. Transmission electron microscopy revealed considerable variations in cuticle thickness in the dcr mutant. Different double mutant combinations showed that a low amount of C16 monomers in cutin leads to the appearance of an electron-translucent layer adjacent to the cuticle proper, which is independent of DCR action. We concluded that DCR is not only essential for incorporating 10,16-dihydroxy C16:0 into cutin but also plays a crucial role in the organization of the cuticle, independent of cutin composition. Further characterization of the mutant petals suggested that nanoridge formation and conical cell shape may contribute to the reduction of physical adhesion forces between petals and other floral organs during floral development.

Quantitative analysis of solid samples using modified specular reflectance accessory.

Diffuse reflectance Fourier transform infrared spectroscopy (DRIFTS) is a fast, reliable and cost effective analytical method, requiring minimal or no sample preparation. It is commonly used in the course of qualitative and quantitative analysis of pharmaceutical ingredients and food. We demonstrate that simpler and cheaper specular reflectance (SR) accessory working in a DRIFTS like mode (SR-DL) can be an alternative for DIRFTS attachment. An application of a modified SR accessory for quantitative analysis of solids samples is presented. As a case study the concentration of cinnarizine in commercial tablets has been determined from DRIFTS and SR-DL infrared (IR) and near-infrared (NIR) spectra recorded using DTGS (deuterated triglicine sulphate) detector in the IR and NIR regions and InGaAs (indium-gallium arsenide) detector in the NIR range. Based on these spectra Partial Least Squares (PLS) models were constructed and relative standard errors of prediction (RSEP) were calculated for the calibration, validation and analysed data sets. They amounted to 2.4-2.5%, 2.1-2.7% and 2.0-2.6% for the DRIFTS attachment while 2.1-2.2%, 2.0-2.3% and 1.9-2.6%, respectively, for the modified SR accessory. Obtained error values indicate that modified SR accessory can be effectively used for quantification of solid pharmaceutical samples in the mid- and near-infrared regions.

Quantification of gluten in wheat flour by FT-Raman spectroscopy.

A procedure for the quantitative determination of gluten in wheat flour based on partial least squares (PLS) treatment of FT-Raman data is described. Results of similar quality were found using a PLS model derived from NIR (near infrared) spectra obtained in DRIFTS (diffuse reflectance infrared Fourier transform spectroscopy) mode and of slightly worse quality from the model constructed based on IR (infrared) spectra registered using a single reflection ATR (attenuated total reflection) diamond accessory. The relative standard errors of prediction (RSEP) were calculated for the calibration, validation and analysed data sets. These errors amounted to 3.2-3.6%, 3.5-3.8% and 4.8-5.7% for the three techniques applied, respectively. The proposed procedures can be used as simple, fast and accurate methods for the quantitative analysis of gluten in flour.

The ABCG transporter PEC1/ABCG32 is required for the formation of the developing leaf cuticle in Arabidopsis.

The cuticle is an essential diffusion barrier on aerial surfaces of land plants whose structural component is the polyester cutin. The PERMEABLE CUTICLE1/ABCG32 (PEC1) transporter is involved in plant cuticle formation in Arabidopsis. The gpat6 pec1 and gpat4 gapt8 pec1 double and triple mutants are characterized. Their PEC1-specific contributions to aliphatic cutin composition and cuticle formation during plant development are revealed by gas chromatography/mass spectrometry and Fourier-transform infrared spectroscopy. The composition of cutin changes during rosette leaf expansion in Arabidopsis. C16:0 monomers are in higher abundance in expanding than in fully expanded leaves. The atypical cutin monomer C18:2 dicarboxylic acid is more prominent in fully expanded leaves. Findings point to differences in the regulation of several pathways of cutin precursor synthesis. PEC1 plays an essential role during expansion of the rosette leaf cuticle. The reduction of C16 monomers in the pec1 mutant during leaf expansion is unlikely to cause permeability of the leaf cuticle because the gpat6 mutant with even fewer C16:0 monomers forms a functional rosette leaf cuticle at all stages of development. PEC1/ABCG32 transport activity affects cutin composition and cuticle structure in a specific and non-redundant fashion.

Analysis of milk by FT-Raman spectroscopy.

Fat, protein, carbohydrates and dry matter were quantified in commercial bovine milk samples, with the relative standard errors of prediction (RSEP) in the 3.4-6.1% range, using the partial least squares (PLS) method based on Raman spectra of liquid milk samples. Results of a better quality were obtained from a PLS model derived from IR spectra registered using single reflection ATR diamond accessory, which yielded RSEP values of 2.4-4.4%. The data indicated IR single reflection ATR spectroscopy and Raman spectroscopy in combination with multivariate modelling using the PLS method, allowed for the reliable, simultaneous quantitative determination of macronutrients in milk. The low signal to noise ratio of Raman spectra affects the quality of fat quantification especially for strongly defatted milk samples.

Transmission Fourier transform infrared microspectroscopy allows simultaneous assessment of cutin and cell-wall polysaccharides of Arabidopsis petals.

A procedure for the simultaneous analysis of cell-wall polysaccharides, amides and aliphatic polyesters by transmission Fourier transform infrared microspectroscopy (FTIR) has been established for Arabidopsis petals. The combination of FTIR imaging with spectra derivatization revealed that petals, in contrast to other organs, have a characteristic chemical zoning with high amount of aliphatic compounds and esters in the lamina and of polysaccharides in the stalk of the petal. The hinge region of petals was particular rich in amides as well as in vibrations potentially associated with hemicellulose. In addition, a number of other distribution patterns have been identified. Analyses of mutants in cutin deposition confirmed that vibrations of aliphatic compounds and esters present in the lamina were largely associated with the cuticular polyester. Calculation of spectrotypes, including the standard deviation of intensities, allowed detailed comparison of the spectral features of various mutants. The spectrotypes not only revealed differences in the amount of polyesters in cutin mutants, but also changes in other compound classes. For example, in addition to the expected strong deficiencies in polyester content, the long-chain acyl CoA synthase 2 mutant showed increased intensities of vibrations in a wavelength range that is typical for polysaccharides. Identical spectral features were observed in quasimodo2, a cell-wall mutant of Arabidopsis with a defect in pectin formation that exhibits increased cellulose synthase activity. FTIR thus proved to be a convenient method for the identification and characterization of mutants affected in the deposition of cutin in petals.