Niobium treated by Plasma Electrolytic Oxidation with calcium and phosphorus electrolytes.

Niobium plates were electrochemically treated by Plasma Electrolytic Oxidation (PEO) with electrolytes containing phosphorous and/or calcium. Three different electrolyte and experimental parameters were used forming three different surfaces. Film morphology, thickness, and chemical composition were analyzed by scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS). A profilometer and the sessile drop technique measured the average surfaces roughness (Ra) and contact angles respectively. X-ray diffraction technique (XRD) analyzed the oxide crystallinity, and scratch tests evaluated the film adhesion. All oxidized surfaces presented pores, without observed cracks. Comparing the different experimental conditions, films obtained with phosphoric acid (P100) show superficial pores, phosphorus incorporation, high hydrophilicity, non-crystalline oxide formation, and good scratch resistance. Films treated with calcium acetate electrolyte (Ca100), compared to P100 exhibit smaller size pores and film thickness, smaller hydrophilicity, and lower scratch resistance. They also demonstrated higher oxide crystallinity, calcium incorporation, and pores interconnections. When the PEO was executed with a blended electrolyte containing calcium acetate and phosphoric acid (Ca50P50) the formed films presented the highest thickness, high phosphorus incorporation, and the lowest contact angle compared with other films. In addition, the pores size, the scratch resistance, calcium incorporation, and oxide crystallinity present intermediate values compared to P100 and Ca100 films. Film crystallinity seems to be influenced by calcium incorporation, whereas, hydrophilicity is phosphorus amount dependent. The pores amount and their interconnections reduced the scratch resistance. Surface features obtained in this work are largely mentioned as positive characteristics for osseointegration processes.

Apatite grown in niobium by two-step plasma electrolytic oxidation.

Plasma electrolytic oxidation (PEO) of niobium plates were done electrochemically in two steps with electrolytes containing phosphorous and calcium being observed the formation of crystalline apatite. All samples were submitted to a first step of PEO using an electrolyte containing phosphate ions. The second oxidization step was made using three different electrolytes. Some samples were oxidized by PEO in electrolyte containing calcium, while in other samples it was used two mixtures of phosphoric acid and calcium acetate monohydrate solutions. Three different surface layers were obtained. The morphology and chemical composition of the films were analyzed by scanning electronic microscopy (SEM), and energy dispersive spectroscopy (EDS) respectively. It was observed that all samples submitted to two-step oxidation shown porous surface and a calcium and phosphorus rich layer. Average surface roughness (Ra) was measured by a profilometer remaining in the sub-micrometric range. The contact angle by sessile drop technique, using 1µL of distilled water was performed with an optical goniometer. It was verified a higher hydrophilicity in all surfaces compared to the polished niobium. Orthorhombic Nb2O5 was identified by XRD in the oxide layer. Crystalline apatite was identified by XRD in surfaces after the second oxidation made with the Ca-rich electrolyte and a mixture of an electrolyte richer in Ca compared to P. These results indicate that a two-step oxidized niobium surface present great features for applications in the osseointegration processes: favorable chemical composition that increase the biocompatibility, the formation of crystalline niobium pentoxide (orthorhombic), high hydrophilicity and formation of crystalline calcium phosphate (apatite) under adequate electrolyte composition.

Diverse patterns of cell wall mannan/galactomannan occurrence in seeds of the Leguminosae.

Endosperms from seeds of different subfamilies of Leguminosae were submitted to sequential aqueous and alkaline aqueous extractions. The extractions from species belonging to the Mimosoideae and Faboideae subfamilies yielded galactomannans with constant Man:Gal ratios, whereas the extractions from Caesalpinioideae seeds gave rise to galactomannans with increasing values of the Man:Gal ratio. The presence of a family of galactomannans within the same species may be a trait found only in Caesalpinioideae subfamily. The final insoluble residues that were obtained after the removal of galactomannans from the Caesalpinioideae and Faboideae subfamilies are composed of pure mannans and do not contain cellulose, while those from the Mimosoideae subfamily are composed of cellulose. A mannan was isolated from the unripe endosperm of Caesalpinia pulcherrima, suggesting no developmental relationship between galactomannan and mannan. These results are consistent with the presence of a distinctive cell wall pattern in the endosperms of Leguminosae species.

Improvement of tetracaine antinociceptive effect by inclusion in cyclodextrins.

Local anesthetics (LA) are among the most important pharmacological compounds used to attenuate or eliminate pain. However, systemic toxicity is still a limitation for LA application, especially for ester-type drugs, such as tetracaine (TTC) that presents poor chemical stability (due to hydrolysis by plasma esterases). Several approaches have been used to improve LA pharmaceutical properties, including the employment of drug-delivery systems. Here we used beta-cyclodextrin (ß-CD) or hydroxypropyl-beta-cyclodextrin (HP-ß-CD) to develop two new TTC formulations (TTC:ß-CD and TTC:HP-ß-CD). The inclusion complexes formation, in a 1:1 stoichiometry, was confirmed by differential scanning calorimetry, X-ray diffraction, UV-VIS absorption and fluorescence. Nuclear magnetic resonance (DOSY experiments) revealed that TTC association with HP-ß-CD is stronger (Ka=1200 mol/L(-1)) than with ß-CD (Ka=845 mol/L(-1)). Moreover, nuclear Overhauser effect (NOE) experiments provided information on the topology of the complexes, where TTC aromatic ring is buried inside the CD hydrophobic cavity. In vitro tests with 3T3 fibroblast cells culture revealed that complexation decreased TTC cytotoxicity. In addition, the total analgesic effect of TTC, tested in rats through the infraorbital nerve test, was improved in 36% with TTC:ß-CD and TTC:HP-ß-CD. In conclusion, these formulations presented potential for future clinical use, by reducing the toxicity and increasing the antinociceptive effect of tetracaine.

Long and compact x-ray pathway for experiments requiring high coherent x-ray beams.

A long x-ray pathway based on an x-ray back-diffraction cavity for coherent x-ray beam experiments is presented. In the present work, such a setup was tested and used for propagation-based x-ray phase contrast imaging (PBI). This setup showed to be useful for PBI purposes, with the advantage of being compact (3 m long) when compared with long x-ray synchrotron beamlines with dimensions from tens to hundreds of meters.

Development and pharmacological evaluation of ropivacaine-2-hydroxypropyl-beta-cyclodextrin inclusion complex.

Ropivacaine (RVC) is an enantiomerically pure local anesthetic (LA) largely used in surgical procedures, which presents physico-chemical and therapeutic properties similar to those of bupivacaine (BPV), but associated to less systemic toxicity. This study focuses on the development and pharmacological evaluation of a RVC in 2-hydroxypropyl-beta-cyclodextrin (HP-beta-CD) inclusion complex. Phase-solubility diagrams allowed the determination of the association constant between RVC and HP-beta-CD (9.46 M(-1)) and showed an increase on RVC solubility upon complexation. Release kinetics revealed a decrease on RVC release rate and reduced hemolytic effects after complexation (onset at 3.7 mM and 11.2mM for RVC and RVC HP-beta-CD, respectively) were observed. Differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and X-ray analysis (X-ray) showed the formation and the morphology of the complex. Nuclear magnetic resonance (NMR) and job-plot experiments afforded data regarding inclusion complex stoichiometry (1:1) and topology. Sciatic nerve blockade studies showed that RVC HP-beta-CD was able to reduce the latency without increasing the duration of motor blockade, but prolonging the duration and intensity of the sensory blockade (p<0.001) induced by the LA in mice. These results identify the RVC HP-beta-CD complex as an effective novel approach to enhance the pharmacological effects of RVC, presenting it as a promising new anesthetic formulation.

Diamond thermal expansion measurement using transmitted X-ray back-diffraction.

The linear thermal expansion coefficient of diamond has been measured using forward-diffracted profiles in X-ray backscattering. This experimental technique is presented as an alternative way of measuring thermal expansion coefficients of solids in the high-resolution Bragg backscattering geometry without the intrinsic difficulty of detecting the reflected beam. The temperature dependence of the lattice parameter is obtained from the high sensitivity of the transmitted profiles to the Bragg angle variation with temperature. The large angular width of the backscattering profiles allows the application of this technique to mosaic crystals with high resolution. As an application of this technique the thermal expansion coefficient of a synthetic type-Ib diamond (110) single crystal was measured from 10 to 300 K. Extremely low values (of the order of 1 x 10(-7) +/- 5 x 10(-7)) for the linear thermal expansion coefficient in the temperature range from 30 to 90 K are in good agreement with other reported measurements.