Evaluation of Novel Plant-derived Monomers-based Pretreatment on Bonding to Sound and Caries-affected Dentin.

This study evaluated the influence of new monomers derived from cashew nut shell liquid (CNSL) applied for dentin biomodification on resin-dentin bond strength, nanoleakage, and micropermeability to sound and artificially-created caries-affected dentin. Human dentin specimens were assigned to five groups, according to the following dentin pretreatment solutions: Absolute ethanol (control), 2 wt% grape seed extract (Vitis vinifera), 2 wt% cardol [from cashew nut shell liquid (CNSL)], 2 wt% cardol-methacrylate or 2 wt% cardanol-methacrylate applied on sound and artificial caries-affected dentin. Specimens were analyzed after 24 hour or 1 year of water storage. Microtensile bond strength (µTBS) (n=6), interface micropermeability (n=3), and silver nanoleakage (n=6) were assessed using a universal testing machine, confocal laser scanning microscope, and scanning electron microscope, respectively. In sound dentin, no difference in bond strength was observed between the groups in either storage period. In artificial caries-affected dentin, pretreatment with cardol-methacrylate resulted in statistically higher bond strength than all the other treatments in both storage periods. Cardol-methacrylate treatment resulted in less nanoleakage, along with improved interfacial integrity, compared to further treatments in artificial caries-affected dentin. Regarding micropermeability analysis, all treatments depicted deficient sealing ability when applied on artificial caries-affected dentin, with the presence of gaps in the control group. In conclusion, cardol-methacrylate is a promising plant-derived monomer to reinforce the hybrid layer, since it preserved resin-dentin bond strength and improved dentin bonding, especially to caries-affected dentin, a well-known harsh substrate for adhesion longevity.

Influence of collagen cross-linkers addition in phosphoric acid on dentin biomodification and bonding of an etch-and-rinse adhesive.

OBJECTIVE: To investigate the effects of natural collagen cross-linkers incorporation in phosphoric acid etchant on dentin biomodification, microtensile bond strength (µTBS) and nanoleakage (NL) of a two-step etch-and-rinse adhesive. METHODS: Experimental aqueous solution of 37% ortho-phosphoric acid were prepared with the addition of 2% biomodification agents: Lignin (LIG) from industrial paper production residue, Cardanol (CARD) from cashew-nut shell liquid, and Proanthocyanidin (PAC) from grape-seed extract. Negative control (NC) was acid solution without cross-linker whilst commercial control (CC) was Condac 37 gel (FGM). Dentin specimens were assayed by FTIR after 15s etching to detect collagen cross-linking. Extracted third molars were used for µTBS (n=7) and fracture mode analysis of Optibond S (Kerr), tested after 24h or 1000 thermal cycles. NL was surveyed by SEM. Statistical analysis was performed with two-way ANOVA and Tukey's test (p<0.05). RESULTS: FTIR confirmed cross-linking for all agents. µTBS of CC was the highest (46.6±6.2MPa), but reduced significantly after aging (35.7±5.2MPa) (p<0.001). LIG (30.6±3.7MPa) and CARD (28.3±1.8MPa) attained similar µTBS which were stable after aging (p>0.05). Fracture mode was predominantly adhesive. At 24h, all groups showed presence of silver uptake in hybrid layer, except CARD. After aging, CARD- and LIG-treated specimens exhibited little amount of silver penetration. CC, PAC and NC showed gaps, great nanoleakage at hybrid layer and presence of water channels in adhesive layer. SIGNIFICANCE: Altogether, ortho-phosphoric acid incorporated with LIG and CARD promotes stable resin-dentin bond strength with minor nanoleakage after aging, thereby achieving therapeutic impact without additional clinical steps.

Ultrafast sonochemistry-based approach to coat TiO2 commercial particles for sunscreen formulation.

TiO2 is a common inorganic filter used in sunscreens due to its photoprotective effect on the skin against UV radiation. However, the use of this kind of material in cosmetics is limited by its inherent photocatalytic activity. It is known that coating on TiO2 surface can improve some features. Although, many of the methodologies used for this purpose are still laborious and time-consuming. Thus, this work reports a novel, easy, cheap and fast strategy to coat TiO2 particles by using a sonochemistry approach, aiming to decrease photocatalytic activity and to enhance colloidal stability. For this proposal, SiO2, Al2O3, ZrO2 and sodium polyacrylate (PAANa) were used to tune the surface of commercial TiO2 particles and they were applied in a sunscreen formulation. The samples were characterized by XRPD, FT-IR, DLS, EDS, SEM and TEM. The photocatalytic activity and UV-shielding ability were also evaluated. The sunscreen formulations were prepared and characterized by zeta potential, DLS, and Sun Protection Factor (SPF). FT-IR, EDS, and charge surface of the particles confirmed the success of the sonochemistry coating. Additionally, TiO2@Al2O3, TiO2@SiO2 and TiO2@PAANa show a lower photocatalytic activity than original TiO2 with similar UV-shielding ability. The sunscreens produced with the coated TiO2 have similar SPF to the one with commercial TiO2. Specifically, the sunscreen with TiO2@PAANa shows an increase in colloidal stability. Herein, the incorporation of the sonochemical-coated TiO2 particles in sunscreen formulations may produce sunscreens with better aesthetic appearance and a greater health security due to its lower free radicals production.

Efficacy of new natural biomodification agents from Anacardiaceae extracts on dentin collagen cross-linking.

OBJECTIVES: Several polyphenols from renewable sources were surveyed for dentin biomodification. However, phenols from cashew nut shell liquid (CNSL, Anacardium occidentale) and from Aroeira (Myracrodruon urundeuva) extract have never been evaluated. The present investigation aimed to compare the dentin collagen crosslinking (biomodification) effectiveness of polyphenols from Aroeira stem bark extract, proanthocyanidins (PACs) from grape-seed extract (Vitis vinifera), cardol and cardanol from CNSL after clinically relevant treatment for one minute. METHODS: Three-point bending test was used to obtain the elastic modulus of fully demineralized dentin beams before and after biomodification, whilst color change and mass variation were evaluated after four weeks water biodegradation. Color aspect was assessed by optical images after biodegradation whereas collagen cross-linking was investigated by micro-Raman spectroscopy. Statistical analysis was performed with repeated-measures two way ANOVA and Tukey's test (p<0.05). RESULTS: The increase in elastic modulus after biomodification was in the order cardol>cardanol>aroeira=PACs with cardol solution achieving mean 338.2% increase. The mass increase after biomodification followed the same order aforementioned. Nevertheless, after four weeks aging, more hydrophobic agent (cardanol) induced the highest resistance against water biodegradation. Aroeira and cardol attained intermediate outcomes whereas PACs provided the lower resistance. Tannin-based agents (Aroeira and PACs) stained the specimens in dark brown color. No color alteration was observed with cardol and cardanol treatments. All four agents achieved crosslinking in micro-Raman after one minute application. SIGNIFICANCE: In conclusion, major components of CNSL yield overall best dentin biomodification outcomes when applied for one minute without staining the dentin collagen.

Novel hydroxyapatite nanorods improve anti-caries efficacy of enamel infiltrants.

OBJECTIVES: Enamel resin infiltrants are biomaterials able to treat enamel caries at early stages. Nevertheless, they cannot prevent further demineralization of mineral-depleted enamel. Therefore, the aim of this work was to synthesize and incorporate specific hydroxyapatite nanoparticles (HAps) into the resin infiltrant to overcome this issue. METHODS: HAps were prepared using a hydrothermal method (0h, 2h and 5h). The crystallinity, crystallite size and morphology of the nanoparticles were characterized through XRD, FT-IR and TEM. HAps were then incorporated (10wt%) into a light-curing co-monomer resin blend (control) to create different resin-based enamel infiltrants (HAp-0h, HAp-2h and HAp-5h), whose degree of conversion (DC) was assessed by FT-IR. Enamel caries lesions were first artificially created in extracted human molars and infiltrated using the tested resin infiltrants. Specimens were submitted to pH-cycling to simulate recurrent caries. Knoop microhardness of resin-infiltrated underlying and surrounding enamel was analyzed before and after pH challenge. RESULTS: Whilst HAp-0h resulted amorphous, HAp-2h and HAp-5h presented nanorod morphology and higher crystallinity. Resin infiltration doped with HAp-2h and HAp-5h caused higher enamel resistance against demineralization compared to control HAp-free and HAp-0h infiltration. The inclusion of more crystalline HAp nanorods (HAp-2h and HAp-5h) increased significantly (p<0.05) the DC. SIGNIFICANCE: Incorporation of more crystalline HAp nanorods into enamel resin infiltrants may be a feasible method to improve the overall performance in the prevention of recurrent demineralization (e.g. caries lesion) in resin-infiltrated enamel.