Antibacterial, ester-free monomers: Polymerization kinetics, mechanical properties, biocompatibility and anti-biofilm activity.

OBJECTIVES: Quaternary ammonium (QA) methacrylate monomers have been extensively investigated and demonstrate excellent antibacterial properties. However, the presence of ester bonds makes them prone to degradation in the oral cavity. In this study, ester-free QA monomers based on meth-acrylamides were synthesized and screened for polymerization kinetics, mechanical properties and antibacterial effects. MATERIALS AND METHODS: Tertiary quaternary ammonium acrylamides (AM) and methacrylamides (MAM) with alkyl side chain lengths of 9 and 14 carbons (C9 and C14) were synthesized and incorporated at 10 wt% into experimental composites based on BisGMA:TEGDMA (1:1), camphorquinone/ethyl-4-dimethylaminobenzoate (0.2/0.8 wt%) and 70 wt% barium glass fillers. Analogous methacrylate versions (MA) were used as controls. Degree of conversion (DC) and rate of polymerization (RP) during photoactivation (800 mW/cm2) were followed in real-time with near-IR. Flexural Strength (FS) and Modulus (E) were measured on 2 × 2 × 25 mm bars in 3-point bending after 24 h dry storage and 7-day storage in water at 37 °C. Antimicrobial properties and biofilm adhesion (fouling) were evaluated by bioluminescence (Luciferase Assay) and biofilm removal by water spray microjet impingement test, respectively. Cytotoxicity was assessed by MTT assay on dental pulp stem cells (DPSC). Data were analyzed with one-way ANOVA/Tukey's test (α = 0.05). RESULTS: DC was similar for all groups tested (∼70%). Both MAMs and C14-AM presented significantly lower RP. Under dry conditions, FS (110-120 MPa) and E (8-9 GPa) were similar for all groups. After water storage, all materials presented FS/E similar to the control, except for C14-AM (for FS) and C14-MAM (for E), which were lower. All C14 versions were strongly antibacterial, decreasing the titer counts of biofilm by more than two orders of magnitude in comparison to the control. C9 monomers did not present significant antibacterial nor antifouling properties. And biofilms had approximately equivalent adhesion on the C9 composites as on the control. Cytotoxicity did not show significant differences between the MA and AM versions and the control group. CONCLUSIONS: C14-QA monomers based on methacrylates and meth-acrylamides present strong antibacterial properties, and in general, similar conversion/mechanical properties compared to the methacrylate control. STATEMENT OF SIGNIFICANCE: This work demonstrates the viability of methacrylamides and acrylamides as potential components in dental restorative materials with antimicrobial properties. The use of ester-free polymerizable functionalities has the potential of improving the degradation resistance of these materials long-term. The use of (meth)acrylamides did not interfere with the antimicrobial potential of quaternary ammonium-based materials.

Use of (meth)acrylamides as alternative monomers in dental adhesive systems.

OBJECTIVES: Methacrylamides are proposed as components for dental adhesive systems with enhanced resistance to hydrolytic and enzymatic degradation. The specific objective of this study was to evaluate the polymerization kinetics, water sorption and solubility, pH-derived degradation and microtensile bond strength of various monofunctional acrylamides and meth(acrylamides) when copolymerized with dimethacrylates. METHODS: Base monomers were added at 60 wt%, and included either BisGMA or UDMA. Monofunctional monomers were added at 40 wt%, including one (meth)acrylate as the control, two secondary methacrylamides and two tertiary acrylamides. DMPA (0.2 wt%) and DPI-PF6 (0.4 wt%)/BHT (0.1 wt%) were added as initiators/inhibitor. Polymerization kinetics wwere followed with near-IR spectroscopy in real time. Water sorption (WS) and solubility (SL) were measured following ISO 4049. Monomer degradation at different pH levels was assessed with 1H NMR. Microtensile bond strength (MTBS) was assessed in caries-free human third molars 48 h and 3 weeks after restorations were placed using solvated BisGMA-based adhesives (40 vol% ethanol). Data were analyzed with one-way ANOVA/Tukey's test (α = 0.05). RESULTS: As expected, rate of polymerization and final degree of conversion (DC) were higher for the acryl versions of each monomer, and decreased with increasing steric hindrance around the vinyl group for each molecule. In general, UDMA copolymerizations were more rapid and extensive than for BisGMA, but this was dependent upon the specific monofunctional monomer added. WS/SL were in general higher for the (meth)acrylamides compared to the (meth)acrylates, except for the tertiary acrylamide, which showed the lowest values. One of the secondary methacrylamides was significantly more stable than the methacrylate control, but the alpha substitutions decreased stability to degradation in acid pH. MTBS in general was higher for the (meth)acrylates. While for all materials the MTBS values at 3 weeks decreased in relation to the 24 h results, the tertiary acrylamide showed no reduction in bond strength. SIGNIFICANCE: This study highlights the importance of considering steric and electronic factors when designing monomers for applications where rapid polymerizations are needed, especially when co-polymerizations with other base monomers are required to balance mechanical properties, as is the case with dental adhesives. The results of this investigation will be used to design fully formulated adhesives to be tested in clinically-relevant conditions.

Reactivity measurement in estimation of benzoquinone and benzoquinone derivatives' allergenicity.

Benzoquinone (BQ) and benzoquinone derivatives (BQD) are used in the production of dyes and cosmetics. While BQ, an extreme skin sensitizer, is an electrophile known to covalently modify proteins via Michael Addition (MA) reaction whilst halogen substituted BQD undergo nucleophilic vinylic substitution (SNV) mechanism onto amine and thiol moieties on proteins, the allergenic effects of adding substituents on BQ have not been reported. The effects of inserting substituents on the BQ ring has not been studied in animal assays. However, mandated reduction/elimination of animals used in cosmetics testing in Europe has led to an increased need for alternatives for the prediction of skin sensitization potential. Electron withdrawing and electron donating substituents on BQ were assessed for effects on BQ reactivity toward nitrobenzene thiol (NBT). The NBT binding studies demonstrated that addition of EWG to BQ as exemplified by the chlorine substituted BQDs increased reactivity while addition of EDG as in the methyl substituted BQDs reduced reactivity. BQ and BQD skin allerginicity was evaluated in the murine local lymph node assay (LLNA). BQD with electron withdrawing groups had the highest chemical potency followed by unsubstituted BQ and the least potent were the BQD with electron donating groups. The BQD results demonstrate the impact of inductive effects on both BQ reactivity and allergenicity, and suggest the potential utility of chemical reactivity data for electrophilic allergen identification and potency ranking.

Detailed mechanistic studies into the reactivities of thiourea and substituted thiourea oxoacids: decompositions and hydrolyses of dioxides in basic media.

Dioxides of methylthiourea (methylaminoiminomethanesulfinic acid, MAIMSA) and dimethylthiourea (dimethylaminoiminomethanesulfinic acid, DMAIMSA) were synthesized and, together with thiourea dioxide (aminoiminomethanesulfinic acid, AIMSA), were studied with respect to their decompositions and hydrolyses in basic aqueous media. All three were stable in acidic media and existed as zwitterions with the positive charge spread out on the 4-electron 3-center N-C-N skeleton and the negative charge delocalized over the two oxygen atoms. All three are characterized by long and weak C-S bonds that are easily cleaved in polar solvents through a nucleophilic attack on the positively disposed carbon center, followed by cleavage of the C-S bond. The sulfur moiety leaving groups are highly unstable, reducing, and rapidly oxidized to S(IV) as hydrogen sulfite in the presence of oxidant. In aerobic conditions, molecular oxygen is a sufficient and efficient oxidant that can oxidize, at diffusion-controlled limits, the highly reducing sulfur species in one-electron steps, thus opening up a cascade of possibly genotoxic reactive oxygen species, commencing with the superoxide anion radical. Radical formation in these decompositions was confirmed by electron paramagnetic resonance techniques. In strongly basic media, decomposition of the dioxides to yield sulfoxylate (SO2(2-), HSO2(-)) is irreversible and, in anaerobic environments, will disproportionate to yield more stable sulfur species from HS(-) to SO4(2-). Decomposition products were dependent on concentrations of molecular oxygen. Solutions open to the atmosphere, with availability to excess oxygen, gave the urea analogue of the thiourea and sulfate, while in limited oxygen conditions hydrogen sulfite and other mixed oxidation states sulfur oxoanions are obtained. DMAIMSA has the longest C-S bond at 0.188 nm and was the most reactive. MAIMSA, with the shortest at 0.186 nm, was the least reactive. Electrospray ionization-mass spectrometry data managed to detect all of the formerly postulated intermediates.

S-oxygenation of thiocarbamides V: oxidation of tetramethylthiourea by chlorite in slightly acidic media.

The reaction between tetramethylthiourea (TTTU) and slightly acidic chlorite has been studied. The reaction is much faster than comparable oxidations of the parent thiourea compound as well as other substituted thioureas. The stoichiometry of the reaction in excess oxidant showed a complete desulfurization of the thiocarbamide to yield the corresponding urea and sulfate: 2ClO2(-) + (Me2N)2C ═ S + H2O → (Me2N)2C ═ O + SO4(2-) + 2Cl(-) + 2H(+). The reaction mechanism is unique in that the most stable metabolite before formation of the corresponding urea is the S-oxide. This is one of the rare occasions in which a low-molecular-weight S-oxide has been stabilized without the aid of large steric groups. ESI-MS data show almost quantitative formation of the S-oxide and negligible formation of the sulfinic and sulfonic acids. TTTU, in contrast to other substituted thioureas, can only stabilize intermediate oxoacids, before formation of sulfate, in the form of zwitterions. With a stoichiometric excess of TTTU over oxidant, the TTTU dimer is the predominant product. Chlorine dioxide, which is formed from the reaction of excess chlorite and HOCl, is a very important reactant in the overall mechanism. It reacts rapidly with TTTU to reform ClO2(-). Oxidation of TTTU by chlorite has a complex dependence on acid as a result of chlorous acid dissociation and protonation of the thiol group on TTTU in high-acid conditions, which renders the thiol center a less effective nucleophile.

Oxyhalogen-sulfur chemistry: kinetics and mechanism of oxidation of chemoprotectant, sodium 2-mercaptoethanesulfonate, MESNA, by acidic bromate and aqueous bromine.

The oxidation of a well-known chemoprotectant in anticancer therapies, sodium 2-mercaptoethanesulfonate, MESNA, by acidic bromate and aqueous bromine was studied in acidic medium. Stoichiometry of the reaction is: BrO3(-) + HSCH2CH2SO3H → Br(-) + HO3SCH2CH2SO3H. In excess bromate conditions the stoichiometry was deduced to be: 6BrO3(-) + 5HSCH2CH2SO3H + 6H(+) → 3Br2 + 5HO3SCH2CH2SO3H + 3H2O. The direct reaction of bromine and MESNA gave a stoichiometric ratio of 3:1: 3Br2 + HSCH2CH2SO3H + 3H2O → HO3SCH2CH2SO3H + 6Br(-) + 6H(+). This direct reaction is very fast; within limits of the mixing time of the stopped-flow spectrophotometer and with a bimolecular rate constant of 1.95 ± 0.05 × 10(4) M(-1) s(-1). Despite the strong oxidizing agents utilized, there is no cleavage of the C-S bond and no sulfate production was detected. The ESI-MS data show that the reaction proceeds via a predominantly nonradical pathway of three consecutive 2-electron transfers on the sulfur center to obtain the product 1,2-ethanedisulfonic acid, a well-known medium for the delivery of psychotic drugs. Thiyl radicals were detected but the absence of autocatalytic kinetics indicated that the radical pathway was a minor oxidation route. ESI-MS data showed that the S-oxide, contrary to known behavior of organosulfur compounds, is much more stable than the sulfinic acid. In conditions where the oxidizing equivalents are limited to a 4-electron transfer to only the sulfinic acid, the products obtained are a mixture of the S-oxide and the sulfonic acid with negligible amounts of the sulfinic acid. It appears the S-oxide is the preferred conformation over the sulfenic acid since no sulfenic acids have ever been stabilized without bulky substituent groups. The overall reaction scheme could be described and modeled by a minimal network of 18 reactions in which the major oxidants are HOBr and Br2(aq).

Pyridoxylamine reactivity kinetics as an amine based nucleophile for screening electrophilic dermal sensitizers.

Chemical allergens bind directly, or after metabolic or abiotic activation, to endogenous proteins to become allergenic. Assessment of this initial binding has been suggested as a target for development of assays to screen chemicals for their allergenic potential. Recently we reported a nitrobenzenethiol (NBT) based method for screening thiol reactive skin sensitizers, however, amine selective sensitizers are not detected by this assay. In the present study we describe an amine (pyridoxylamine (PDA)) based kinetic assay to complement the NBT assay for identification of amine-selective and non-selective skin sensitizers. UV-Vis spectrophotometry and fluorescence were used to measure PDA reactivity for 57 chemicals including anhydrides, aldehydes, and quinones where reaction rates ranged from 116 to 6.2 × 10(-6) M(-1) s(-1) for extreme to weak sensitizers, respectively. No reactivity towards PDA was observed with the thiol-selective sensitizers, non-sensitizers and prohaptens. The PDA rate constants correlated significantly with their respective murine local lymph node assay (LLNA) threshold EC3 values (R(2) = 0.76). The use of PDA serves as a simple, inexpensive amine based method that shows promise as a preliminary screening tool for electrophilic, amine-selective skin sensitizers.

Oxyhalogen-sulfur chemistry: kinetics and mechanism of oxidation of N-acetyl homocysteine thiolactone by acidified bromate and aqueous bromine.

N-acetyl homocysteine thiolactone (NAHT), medically known as citiolone, can be used as a mucolytic agent and for the treatment of certain hepatic disorders. We have studied the kinetics and mechanisms of its oxidation by acidic bromate and aqueous bromine. In acidic bromate conditions the reaction is characterized by a very short induction period followed by a sudden and rapid formation of bromine and N-acetyl homocysteine sulfonic acid. The stoichiometry of the bromate-NAHT reaction was deduced to be: BrO3(-) + H2O + CH3CONHCHCH2CH2SCO → CH3CONHCHCH2CH2(SO3H)COOH + Br(-) (S1) while in excess bromate it was deduced to be: 6BrO3(-) + 5CH3CONHCHCH2CH2SCO + 6H(+) → 3Br2 + 5CH3CONHCHCH2CH2(SO3H)COOH + 2H2O (S2). For the reaction of NAHT with bromine, a 3:1 stoichiometric ratio of bromine to NAHT was obtained: 3Br2 + CH3CONHCHCH2CH2SCO + 4H2O → 6Br(-) + CH3CONHCHCH2CH2(SO3H)COOH + 6H(+) (S3). Oxidation occurred only on the sulfur center where it was oxidized to the sulfonic acid. No sulfate formation was observed. The mechanism involved an initial oxidation to a relatively stable sulfoxide without ring-opening. Further oxidation of the sulfoxide involved two pathways: one which involved intermediate formation of an unstable sulfone and the other involves ring-opening coupled with oxidation through to the sulfonic acid. There was oligooscillatory production of aqueous bromine. Bromide produced in S1 reacts with excess bromate to produce aqueous bromine. The special stability associated with the sulfoxide allowed it to coexist with aqueous bromine since its further oxidation to the sulfone was not as facile. The direct reaction of aqueous bromine with NAHT was fast with an estimated lower limit bimolecular rate constant of 2.94 ± 0.03 × 10(2) M(-1) s(-1).

Kinetics and mechanism of the oxidation of N-acetyl homocysteine thiolactone with aqueous iodine and iodate.

The kinetics of N-acetyl homocysteine thiolactone (NAHT) oxidation by aqueous iodine and iodate were studied by spectrophotometric techniques. The iodate-NAHT reaction is slow and results in the formation of N-acetyl homocysteine thiolactone sulfoxide as the sole product (NAHTSO). The stoichiometry of the reaction was deduced as: IO3(-) + 3NAHT → I(-) + 3NAHTSO (S1). In excess iodate conditions, the iodide produced in S1 is oxidized to give iodine: IO3(-) + 5I(-) + 6H(+) → 3I2 + 3H2O (S2). Thus in excess iodate conditions the overall stoichiometry of the reaction is a linear combination of S1 and S2 that eliminates iodide, 5S1 + S2: 2IO3(-)+ 5NAHT+ 2H(+) → I2 + 5NAHTSO + H2O. There was a 1:1 stoichiometry for the NAHT - I2 reaction: NAHT+ I2 + H2O → NAHTSO +2I(-) + 2H(+) (S3). All reactions, S1, S2 and S3 occur simultaneously and since they are all comparable in rate; complex dynamics were observed. Iodide catalyzes S1 and S2 but inhibits S3. Iodide is a product of both S1 and S3. It has the most profound effect on the overall global dynamics observed. The overall reaction scheme which involved S1, S2 and S3 was modeled by a simple 12-reaction mechanistic scheme which gave a very good fit to experimental data.

Oxyhalogen-sulfur chemistry: kinetics and mechanism of oxidation of captopril by acidified bromate and aqueous bromine.

By nature of their nucleophilicity, all thiol-based drugs are oxidatively metabolized in the physiological environment. The key to understanding the physiological role of a hypertension drug, (2S)-1-[(2S)-2-methyl-3-sulfanylpropanoyl]pyrrolidine-2-carboxylic acid, medically known as captopril is through studying its oxidation pathway: its reactive intermediates and oxidation products. The oxidation of captopril by aqueous bromine and acidified bromate has been studied by spectrophotometric and electrospray ionization techniques. The stoichiometry for the reaction of acidic bromate with captopril is 1:1, BrO3(-) + (C4H6N)(COOH)(COCHCH3CH2)-SH → (C4H6N)(COOH)(COCHCH3CH2)-SO3H + Br(-), with reaction occurring only at the thiol center. For the direct reaction of bromine with captopril, the ratio is 3:1; 3Br2 + (C4H6N)(COOH)(COCHCH3CH2)-SH + 3H2O → (C4H6N)(COOH)(COCHCH3CH2)-SO3H + 6HBr. In excess acidic bromate conditions the reaction displays an initial induction period followed by a sharp rise in absorbance at 390 nm due to rapid formation of bromine. The direct reaction of aqueous bromine with captopril was much faster than oxidation of the thiol by acidified bromate, with a bimolecular rate constant of (1.046 (±0.08) × 10(5) M(-1) s(-1). The detection of thiyl radicals confirms the involvement of radicals as intermediates in the oxidation of Captopril by acidified BrO3(-). The involvement of thiyl radicals in oxidation of captopril competes with a nonradical pathway involving 2-electron oxidations of the sulfur center. The oxidation product of captopril under these strong oxidizing conditions is a sulfonic acid as confirmed by electrospray ionization mass spectrometry (ESI-MS), iodometric titrations, and proton nuclear magnetic resonance ((1)H NMR) results. There was no evidence from ESI-MS for the formation of the sulfenic and sulfinic acids in the oxidation pathway as the thiol group is rapidly oxidized to the sulfonic acid. A computer simulation analysis of this mechanism gave a reasonably good fit to the experimental data.

Substituent effects on the reactivity of benzoquinone derivatives with thiols.

Benzoquinone (BQ) is an extremely potent electrophilic contact allergen that haptenates endogenous proteins through Michael addition (MA). It is also hypothesized that BQ may haptenate proteins via free radical formation. The objective of this study was to assess the inductive effects (activating and deactivating) of substituents on BQ reactivity and the mechanistic pathway of covalent binding to a nucleophilic thiol. The BQ binding of Cys34 on human serum albumin was studied, and for reactivity studies, nitrobenzenethiol (NBT) was used as a surrogate for protein binding of the BQ and benzoquinone derivatives (BQD). Stopped flow techniques were used to determine pseudofirst order rate constants (k) of methyl-, t-butyl-, and chlorine-substituted BQD reactions with NBT, whereas electron pair resonance (EPR) studies were performed to investigate the presence of the free radical mediated binding mechanism of BQD. Characterization of adducts was performed using mass spectrometry and nuclear magnetic resonance spectroscopy (NMR). The rate constant values demonstrated the chlorine-substituted (activated) BQD to be more reactive toward NBT than the methyl and t-butyl-substituted (deactivated) BQD, and this correlated with the respective EPR intensities. The EPR signal, however, was quenched in the presence of NBT suggesting MA as the dominant reaction pathway. MS and NMR results confirmed adduct formation to be a result of MA onto the BQ ring with vinylic substitution also occurring for chlorine-substituted derivatives. The binding positions on BQ and NBT/BQ(D) stoichiometric ratios were affected by whether the inductive effects of the substituents on the ring were positive or negative. The reactivity of BQ and BQD is discussed in terms of the potential relationship to potential allergenic potency.