Large head metal-on-metal bearing surface with a TMZF titanium alloy femoral stem with high rates of revision and trunnion failure.

Background: Mechanically assisted crevice corrosion at the head-neck interface puts implants at risk of trunnionosis, femoral head dissociation, implant failure and the development of metallosis. Metal-on-Metal bearings have very low wear rates, significantly lower than metal-on-polytethylene, but their wear results in cobalt and chromium ion systemic distribution. This is a study of the MITCH metal-on-metal bearing surface coupled with an Accolade TMZF stem. Methods: This was a retrospective review of 24 total hip replacements 21 patients in that underwent MITCH TRH/Accolade TMZF implantation at a minimum of 12 years post operatively. The primary outcome of this study was all-cause revision with particular attention to revision due to trunnion failure and/or cobalt and chromium ion level. Results: There was a revision rate of 66.7 % (n = 16) at a minimum of twelve years post operatively. Most notably there were six revisions for a gross trunnion failure. Two cases were revised for impending trunnion failure. There were seven cases revised for elevated serum cobalt and chromium levels and one was revised for unexplained pain. Discussion: Patients in our study that underwent TMZF alloy cementless stems coupled with large cobalt chromium alloy heads are at high risk of catastrophic trunnion failure. The high rate of trunnnionosis in this implant combination is thought to be related to a significantly different Young's modulus due to a material mismatch coupled with galvanic corrosion.

Open Reduction and Internal Fixation and Cement-In-Cement Revision for Selected Vancouver B Proximal Femur Periprosthetic Fractures.

The incidence of periprosthetic proximal femoral fractures is increasing with the increase in arthroplasty being performed as well as aging populations. We describe an open reduction and internal fixation and cement-in-cement technique utilizing a well-fixed cement mantle. The advantages of this allow for a shorter operative time, reduction in risk of iatrogenic femoral fractures, and reduction in blood loss. This was a retrospective study reviewing 20 patients that underwent this technique for periprosthetic fractures. Thirty percent (n = 6) of patients underwent subsequent surgery. We had a 95% (n = 19) union rate with 1 case refracturing through the old fracture. This technique can allow for shorter operative times and a lower physiological insult in reducible periprosthetic proximal femur fractures with a stable cement mantle.

Third and fourth generation ceramic-on-ceramic total hip arthroplasty at a minimum of ten years.

Background: Ceramic on Ceramic bearings in Total Hip Arthroplasty (THA) afford a low friction coefficient, low wear rates and extreme hardness. Significant complications include hip squeak, ceramic fracture and poor polyethylene performance in revision procedures due to imbedding of abrasive microscopic ceramic fragments. We report on the results of this bearing at a minimum of 10 years. Methods: A single-centre retrospective review of 449 THAs was performed. Primary outcome measures included aseptic revision and all-cause revision rates at a minimum of 10 years post operatively. Evaluation of functionality was performed with WOMAC and SF-36 scores which were performed pre-operatively and at intervals of 6 months, one year, 2 years, 5 years and 10 years post operatively. Results: There was a 6.2% (n = 28) all-cause and 5.3% (n = 24) aseptic revision rate for ceramic on ceramic total hip arthroplasty at minimum of 10 years with a mean time to revision 4.8 years (range 2 months-11.6 years). Notably, there were 2 revisions for ceramic head fracture, one for ceramic liner fracture, 3 for aseptic loosening and 3 revisions for squeaking. Pain of unknown origin was the most common reason for revision. There was an improvement in postoperative WOMAC scores from a mean of 59.8 (range 15-95) pre-operatively to a mean of 15.6 (range 0-78) at 10 years. Conclusion: This study showed good functional outcomes but high revision rates for CoC THA at a minimum of 10 years. Our rates of ceramic fracture were consistent with other studies.

Assessment of previous fracture and anti-osteoporotic medication prescription in hip fracture patients.

INTRODUCTION: Hip fracture prevention is an essential component in elderly patient care. History of prior fracture is a significant risk factor for subsequent hip fracture. There are variable rates of treatment for these groups of patients. The aims of this study were to make an assessment of how many hip fracture patients over a 1 year period had a previous fracture and to assess whether or not these patients were on anti-osteoporotic medication. METHODS: Assessment on whether or not patients had a prior fracture using the national radiology imaging system checking radiology reports for all previous imaging performed. Checking patients bone health status using the hip fracture database for our hospital. RESULTS: There were 225 hip fractures in 221 patients over a 1-year period. About 42.6% of females and 35.9% of males had a history of previous fracture. Vertebral fractures were the most common type of fracture. We found 7% of patients had a contralateral hip fracture. There were 81% of patients with prior fracture, and 71% of those without prior fracture were on anti-osteoporotic medication. DISCUSSION: Vertebral fractures were the most common preceding fracture in hip fracture patients. There were many patients with a history of fragility fractures that were not on preventative medication. Overall there were good prescription rates of anti-osteoporotic medication. There were significantly higher rates of prescription amongst females compared with males.

Follow-up study on transphyseal ACL reconstruction in Irish adolescents with no cases of leg length discrepancy or angular deformity.

BACKGROUND: The rate of ACL injury in adolescents has been rising in recent years. Surgical options include transphyseal and physeal-sparing ACL reconstruction. AIMS: In this study, we performed a transphyseal ACL reconstruction and followed up patients to assess functional outcomes and to assess for growth disturbance. METHOD: There were 22 patients seen at follow-up between the age of 12 and 16. Skeletal age assessment was performed using an MRI atlas with an average skeletal age of 14.7 (range 12-16). The mean follow-up time was 36 months (range 14-63 months). Clinical examination was performed to assess for leg length discrepancy, and leg length radiographs were used to assess for angular deformity. Patients' post-surgery functionality was assessed with the IKDC score and the Tegner Lysholm score. RESULTS: The mean IKDC and Lysholm scores at follow-up were found to be 91 and 94, respectively. The median Tegner score prior to injury was 8.5 and postoperatively was 7.5. There were no cases of leg length discrepancy found on clinical examination, and there were no cases of significant angular deformity. Four patients ruptured again and went on to have repeat ACL reconstruction. CONCLUSIONS: Midterm results at an average follow-up of 3 years after the surgery showed good functional outcomes using the transphyseal ACL reconstruction technique with good return to activity. There were no cases of leg length discrepancy or angular deformity. Transphyseal ACL reconstruction is a viable method of treatment for adolescent ACL tears.