Stability of silicon-tin alloyed nanocrystals with high tin concentration synthesized by femtosecond laser plasma in liquid media.

Nanocrystals have a great potential for future materials with tunable bandgap, due to their optical properties that are related with the material used, their sizes and their surface termination. Here, we concentrate on the silicon-tin alloy for photovoltaic applications due to their bandgap, lower than bulk Si, and also the possibility to activate direct band to band transition for high tin concentration. We synthesized silicon-tin alloy nanocrystals (SiSn-NCs) with diameter of about 2-3 nm by confined plasma technique employing a femtosecond laser irradiation on amorphous silicon-tin substrate submerged in liquid media. The tin concentration is estimated to be [Formula: see text], being the highest Sn concentration for SiSn-NCs reported so far. Our SiSn-NCs have a well-defined zinc-blend structure and, contrary to pure tin NCs, also an excellent thermal stability comparable to highly stable silicon NCs. We demonstrate by means of high resolution synchrotron XRD analysis (SPring 8) that the SiSn-NCs remain stable from room temperature up to [Formula: see text] with a relatively small expansion of the crystal lattice. The high thermal stability observed experimentally is rationalized by means of first-principle calculations.

In Situ Grown Nanocrystalline Si Recombination Junction Layers for Efficient Perovskite-Si Monolithic Tandem Solar Cells: Toward a Simpler Multijunction Architecture.

The perovskite-Si tandem is an attractive avenue to attain greater power conversion efficiency (PCE) than their respective single-junction solar cells. However, such devices generally employ complex stacks with numerous deposition steps, which are rather unattractive from an industrial perspective. Here, we develop a simplified tandem architecture consisting of a perovskite n-i-p stack on a silicon heterojunction structure without applying the typically used indium-tin-oxide (ITO) recombination junction (RJ) layer between the top and bottom cells. It is demonstrated that an n-type hydrogenated nanocrystalline silicon (nc-Si:H) grown in situ on an amorphous silicon hole contact layer of the bottom cell acts as an efficient RJ layer, leading to a high open-circuit voltage (VOC) of >1.8 V and a PCE of 21.4% without optimizing the optical design. Compared to the tandem cell with an ITO RJ layer, the nc-Si:H RJ layer not only improves light management but also achieves a higher VOC due to superior contact properties with an overlying SnO2 electron transport layer of the perovskite top cell. Omitting the costly material and its deposition step offers the opportunity toward realizing industrially feasible high-efficiency tandem solar cells.

Carrier extraction from metallic perovskite oxide nanoparticles.

We observe the extraction of carriers excited between two types of bands in the perovskite oxide, Sr-deficient strontium niobate (Sr0.9NbO3). Sr0.9NbO3 exhibits metallic behaviour and high conductivity, whilst also displaying broad absorption across the ultraviolet, visible, and near-infrared spectral regions, making it an attractive material for solar energy conversion. Furthermore, the optoelectronic properties of strontium niobate can easily be tuned by varying the Sr fraction or through doping. Sr-deficient strontium niobate exhibits a split conduction band, which enables two types of optical transitions: intraband and interband. However, whether such carriers can be extracted from an unusual material as such remains unproven. In this report, we have overcome the immense challenge of photocarrier extraction by fabricating an extremely thin absorber layer of Sr0.9NbO3 nanoparticles. These findings open up great opportunities to harvest a very broad solar spectral absorption range with reduced recombination losses.

Nanostructured Perovskite Solar Cells.

Over the past decade, lead halide perovskites have emerged as one of the leading photovoltaic materials due to their long carrier lifetimes, high absorption coefficients, high tolerance to defects, and facile processing methods. With a bandgap of ~1.6 eV, lead halide perovskite solar cells have achieved power conversion efficiencies in excess of 25%. Despite this, poor material stability along with lead contamination remains a significant barrier to commercialization. Recently, low-dimensional perovskites, where at least one of the structural dimensions is measured on the nanoscale, have demonstrated significantly higher stabilities, and although their power conversion efficiencies are slightly lower, these materials also open up the possibility of quantum-confinement effects such as carrier multiplication. Furthermore, both bulk perovskites and low-dimensional perovskites have been demonstrated to form hybrids with silicon nanocrystals, where numerous device architectures can be exploited to improve efficiency. In this review, we provide an overview of perovskite solar cells, and report the current progress in nanoscale perovskites, such as low-dimensional perovskites, perovskite quantum dots, and perovskite-nanocrystal hybrid solar cells.

Performance and stability gain in zero-dimensional perovskite solar cells after >2 years when hybridized with silicon nanocrystals.

We report highly stable zero-dimensional (CH3NH3)3Bi2I9 photovoltaic cells which demonstrate a 33% increase in performance after 2 years when hybridized with silicon nanocrystals (SiNCs). The natural oxidation of SiNCs is expected to consume radical species and improve the SiNC/(CH3NH3)3Bi2I9 interface and electronic coupling whilst also inhibiting defect-induced degradation.

Probing the structure-property-composition relationship in organic-inorganic tri-halide perovskites.

Here, we have synthesised a range of samples, with the formula (CH3NH3)1-2x(H3NC2H4NH3)xPbI3, with different levels of ethylenediammonium substitution to probe non-stoichiometry at the A-site of the perovskite. A single phase region was identified and is accompanied by a change in photophysical properties. The influence of aliovalent substitution with ethylenediammonium results in a decrease in HOMO level from -5.31 eV for x = 0 to -5.88 eV for x = 0.15.

Zero-dimensional methylammonium iodo bismuthate solar cells and synergistic interactions with silicon nanocrystals.

Organometal trihalide perovskite solar cells have attracted monumental attention in recent years. Today's best devices, based on a three-dimensional perovskite structure of corner-sharing PbI6 octahedra, are unstable, toxic, and display hysteresis in current-voltage measurements. We present zero-dimensional organic-inorganic hybrid solar cells based on methylammonium iodo bismuthate (CH3NH3)3(Bi2I9) (MABI) comprising a Bi2I9 bioctahedra and observe very low hysteresis for scan rates in the broad range of 150 mV s-1 to 1500 mV s-1 without any interfacial layer engineering. We confirm good stability for devices produced and stored in open air without humidity control. The MABI structure can also accommodate silicon nanocrystals, leading to an enhancement in the short-circuit current. Through the material MABI, we demonstrate a promising alternative to the organometal trihalide perovskite class and present a model material for future composite third-generation photovoltaics.

Charge carrier localised in zero-dimensional (CH3NH3)3Bi2I9 clusters.

A metal-organic hybrid perovskite (CH3NH3PbI3) with three-dimensional framework of metal-halide octahedra has been reported as a low-cost, solution-processable absorber for a thin-film solar cell with a power-conversion efficiency over 20%. Low-dimensional layered perovskites with metal halide slabs separated by the insulating organic layers are reported to show higher stability, but the efficiencies of the solar cells are limited by the confinement of excitons. In order to explore the confinement and transport of excitons in zero-dimensional metal-organic hybrid materials, a highly orientated film of (CH3NH3)3Bi2I9 with nanometre-sized core clusters of Bi2I93- surrounded by insulating CH3NH3+ was prepared via solution processing. The (CH3NH3)3Bi2I9 film shows highly anisotropic photoluminescence emission and excitation due to the large proportion of localised excitons coupled with delocalised excitons from intercluster energy transfer. The abrupt increase in photoluminescence quantum yield at excitation energy above twice band gap could indicate a quantum cutting due to the low dimensionality.Understanding the confinement and transport of excitons in low dimensional systems will aid the development of next generation photovoltaics. Via photophysical studies Ni et al. observe 'quantum cutting' in 0D metal-organic hybrid materials based on methylammonium bismuth halide (CH3NH3)3Bi2I9.

Gold nanoparticle-polymer nanocomposites synthesized by room temperature atmospheric pressure plasma and their potential for fuel cell electrocatalytic application.

Conductive polymers have been increasingly used as fuel cell catalyst support due to their electrical conductivity, large surface areas and stability. The incorporation of metal nanoparticles into a polymer matrix can effectively increase the specific surface area of these materials and hence improve the catalytic efficiency. In this work, a nanoparticle loaded conductive polymer nanocomposite was obtained by a one-step synthesis approach based on room temperature direct current plasma-liquid interaction. Gold nanoparticles were directly synthesized from HAuCl4 precursor in poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS). The resulting AuNPs/PEDOT:PSS nanocomposites were subsequently characterized under a practical alkaline direct ethanol fuel cell operation condition for its potential application as an electrocatalyst. Results show that AuNPs sizes within the PEDOT:PSS matrix are dependent on the plasma treatment time and precursor concentration, which in turn affect the nanocomposites electrical conductivity and their catalytic performance. Under certain synthesis conditions, unique nanoscale AuNPs/PEDOT:PSS core-shell structures could also be produced, indicating the interaction at the AuNPs/polymer interface. The enhanced catalytic activity shown by AuNPs/PEDOT:PSS has been attributed to the effective electron transfer and reactive species diffusion through the porous polymer network, as well as the synergistic interfacial interaction at the metal/polymer and metal/metal interfaces.