The effect of supraspinatus tears on glenohumeral translations in passive pitching motion.

BACKGROUND: Supraspinatus tears are common in pitchers. However, the effect of these tears on glenohumeral (GH) mechanics is incompletely understood. PURPOSE/HYPOTHESIS: To describe the effect of supraspinatus tears and repairs on GH kinematics during an abbreviated throwing motion using the intact shoulder girdle. The hypothesis was that supraspinatus tears would lead to an increase of GH translation in the coronal plane and supraspinatus repairs would restore GH kinematics. STUDY DESIGN: Controlled laboratory study. METHODS: Six shoulders from 3 fresh-frozen cadavers were tested in a novel 7 degrees of freedom robotic testing system. Torsos were mounted and the wrist was pinned to an actuator mounted on an upper frame. After the deltoid was removed, the shoulders were studied during an abbreviated throwing motion (ATM) from maximum external rotation to the midcoronal plane to establish a baseline. The ATM was repeated after creation of a 1-cm supraspinatus tear, after creation of a 3-cm supraspinatus tear, and after repair with a transosseous equivalent (TOE) technique. Retroreflective bone markers and high-speed infrared cameras were used to measure GH kinematics and calculate the center of rotation of the GH joint (CORGH) instantaneously. RESULTS: The 1- and 3-cm supraspinatus tears did not significantly alter GH translation. The TOE repair shifted the CORGH posteriorly, as evidenced by a significant decrease in the overall GH translation in all 3 planes (P = .003, .019, and .026, for x-y, y-z, and x-z planes, respectively). CONCLUSION: In contrast to a TOE repair of the supraspinatus tendon, isolated supraspinatus tears did not perturb GH kinematics in this cadaveric model of the throwing shoulder. CLINICAL RELEVANCE: In throwing athletes, treatment of rotator cuff tears should be addressed with caution to avoid an unintended alteration in GH kinematics due to overtightening of the tendon.

Bulk effect of the deltoid muscle on the glenohumeral joint.

BACKGROUND: There remains controversy on the role of the deltoid on glenohumeral translations during basic and pitching motions. We thus studied the passive effect of the deltoid on the deltoid glenohumeral joint center (GHJC). METHODS: Six shoulders were tested using an automated mechanical system. A baseline motion pattern of the intact specimen was contrasted with glenohumeral translation after removal of the deltoid. Each condition was evaluated in abduction (ABD) and an abbreviated throwing motion (ATM) using retro-reflective, bone-embedded markers. The absolute trajectory and the area under the curve (AUC) for each motion were calculated and glenohumeral kinematics with respect to the GH translation were compared. RESULTS: The removal of the deltoid resulted in significant changes of the GH translation. During 30-60° of ABD, it resulted in a superior and more anterior GH translation, while in the 60-90° segment in a more inferior and medial GH translation. During 90-120°, the GH translation was medialized. In the pitching motion from maximum external rotation to 90° of external rotation (ER), the removal of the deltoid resulted in a more superior, anterior and lateral GH translation. Thus limits anterior translation in the abduction-external rotation position. In the remaining segments (90-80° and 80-45° of ER), it resulted in a lateralization of the GH translation. CONCLUSIONS: Modelling the throwing shoulder, the deltoid has a significant influence on glenohumeral motion. Athletes with deltoid dysfunction and limited range of motion are at risk for injury due to the resulting change in their throwing mechanics.

Preliminary evaluation of a robotic apparatus for the analysis of passive glenohumeral joint kinematics.

BACKGROUND: The shoulder has the greatest range of motion of any joint in the human body. This is due, in part, to the complex interplay between the glenohumeral (GH) joint and the scapulothoracic (ST) articulation. Currently, our ability to study shoulder kinematics is limited, because existing models isolate the GH joint and rely on manual manipulation to create motion, and have low reproducibility. Similarly, most established techniques track shoulder motion discontinuously with limited accuracy. METHODS: To overcome these problems, we have designed a novel system in which the shoulder girdle is studied intact, incorporating both GH and ST motions. In this system, highly reproducible trajectories are created using a robotic actuator to control the intact shoulder girdle. High-speed cameras are employed to track retroreflective bone markers continuously. RESULTS: We evaluated this automated system's capacity to reproducibly capture GH translation in intact and pathologic shoulder conditions. A pair of shoulders (left and right) were tested during forward elevation at baseline, with a winged scapula, and after creation of a full thickness supraspinatus tear. DISCUSSION: The system detected differences in GH translations as small as 0.5 mm between different conditions. For each, three consecutive trials were performed and demonstrated high reproducibility and high precision.

The effect of simulated scapular winging on glenohumeral joint translations.

HYPOTHESIS: In this study, we aim to test whether scapular winging results in a significant change in glenohumeral translation in the initial phase of the throwing motion. METHODS: Six shoulders underwent an abbreviated throwing motion (ATM) from late cocking to the end of acceleration by use of a validated robotic system. The intact specimens were tested to establish a baseline. The position of the scapula was then affected to simulate scapular winging by placing a cylindrical wedge under the inferior angle of the scapula, and the ATM was performed again. For both conditions, the average glenohumeral translations and scapular rotations were plotted over time to calculate the area under the curve, as a representative of the overall glenohumeral translations and scapular rotations observed during the ATM. RESULTS: Throughout the motion, the winged scapulae showed, on average, 7.7° more upward rotation, 1.6° more internal rotation, and 5.3° more anterior tipping as compared with the baseline. The scapular position relative to the hanging arm was significantly different between the baseline and scapular winging conditions in all arm positions, except for maximal external rotation and the neutral position. Comparing the area under the curve at baseline and with scapular winging indicated that scapular winging significantly increased anterior translation of the glenohumeral joint whereas translation in the superior/inferior and medial/lateral directions did not result in a change in translation. DISCUSSION: These results may suggest a more important role of abnormalities in scapular position in predisposing throwing athletes to shoulder injuries of the anterior capsulolabral structures and consecutive glenohumeral instability.

Comparison of all-inside meniscal repair devices with matched inside-out suture repair.

BACKGROUND: All-inside meniscal repairs are performed with increasing frequency because of the availability of newly developed devices. A comparison of their biomechanical characteristics may aid physicians in selecting a method of meniscal repair. HYPOTHESIS: All-inside meniscal repairs will be superior to their inside-out controls in response to cyclic loading and load-to-failure testing. STUDY DESIGN: Controlled laboratory study. METHODS: Sixty-six bucket-handle tears in matched porcine menisci were repaired using the Ultra FasT-Fix, Meniscal Cinch, Ultrabraid No. 0, and FiberWire 2-0 sutures. Initial displacement, cyclic loading (100, 300, and 500 cycles), and load-to-failure testing were performed. The displacement, response to cyclic loading, and mode of failure were recorded. The stiffness was calculated. RESULTS: The Meniscal Cinch demonstrated a significantly higher initial displacement than the other methods tested (P = .04). No significant difference was found among the methods in response to cyclic loading. The inside-out FiberWire repair demonstrated the highest load to failure (120.8 ± 23.5 N) and was significantly higher than both the Meniscal Cinch (64.8 ± 24.1 N, P < .001) and the Ultra FasT-Fix (88.3 ± 14.3 N, P = .002). It was not significantly higher than the inside-out Ultrabraid suture repair (98.8 ± 29.2 N). The inside-out FiberWire repair had the highest stiffness (28.7 ± 7.8 N/mm). It was significantly higher than the Meniscal Cinch (18.0 ± 8.8 N/mm, P = .01). The most common mode of failure in all methods was suture failure. CONCLUSION: An inside-out suture repair affords surgeons the best overall biomechanical characteristics of the devices tested (initial displacement, response to cyclic loading, and load to failure). For an all-inside repair, the Ultra FasT-Fix reproduces the characteristics of its matched inside-out suture repair more closely than the Meniscal Cinch. CLINICAL RELEVANCE: Inside-out sutures and all-inside devices have similar responses to cyclic loading.

Impact of oedema on implant geometry and dosimetry for temporary high dose rate brachytherapy of the prostate.

The optimal timing of dosimetry for permanent seed prostatic implants remains contentious given the half life of post-implant oedema resolution. The aim of this study was to establish whether prostatic oedematous change over the duration of a temporary high dose rate (HDR) interstitial brachytherapy (BR) boost would result in significant needle displacement, and whether this change in geometry would influence dosimetry. Two CT scans, one for dosimetric purposes on the day of the implant and the second just prior to implant removal, were obtained for four patients receiving transperineal interstitial prostate brachytherapy. The relative changes in cross-sectional dimensions of the implants were calculated by establishing the change in mean radial distance (MRD) of the needle positions from the geometric centre of the implant for each patient's pair of CT studies. The treatment plan, as calculated from the first CT scan, was used in the second set of CT images to allow a comparison of dose distribution. The percentage change in MRD over the duration of the temporary implants ranged from -1.91% to 1.95%. The maximum change in estimated volume was 3.94%. Dosimetric changes were negligible. In the four cases studied, the degree of oedematous change and consequent displacement of flexiguide needle positions was negligible and did not impact on the dosimetry. The rate and direction of oedematous change can be extremely variable but on the basis of the four cases studied and the results of a larger recent study, it might not be necessary to re-image patients for dosimetric purposes over the duration of a fractionated HDR BT boost to the prostate where flexiguide needles are utilized. Nevertheless, further investigation with larger patient numbers is required.