Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 22
Filter
1.
Arch. Soc. Esp. Oftalmol ; 95(6): 263-270, jun. 2020. tab, graf
Article in Spanish | IBECS | ID: ibc-199191

ABSTRACT

OBJETIVO: Evaluar y comparar los resultados visuales y morfológicos de regímenes de tratamiento pro re nata (PRN) y tratar-y-extender (T&E) a tres años en la práctica clínica real. MÉTODOS: Un estudio retrospectivo de pacientes con degeneración macular vinculada a la edad neovascular (DMEN) tratadas con anti-VEGF con tres años de seguimiento continuo y sin tratamientos anti-VEGF anteriores. Se midieron la mejor agudeza visual corregida (MAVC), el espesor foveal central (EFC) y el número de inyecciones intravítreas para determinar diferencias estadísticas entre ambos grupos al inicio y a lo largo del seguimiento. RESULTADOS: Se incluyeron en el estudio un total de 240 ojos, 170 en el grupo PRN y 70 en el grupo T&E. A los 12 meses la ganancia media con respecto al inicio de MAVC (en letras ETDRS) llegó a su punto más alto en el grupo T&E (+ 6,38 ± 13,32; p = 0,25). En el grupo PRN, MAVC llegó al máximo a los tres meses y disminuyó lentamente hasta el final del seguimiento. Con ambos regímenes, desde el inicio el EFC continuó disminuyendo hasta el segundo año (PRN -138,81 [-846,7 a +162,77] y T&E -81 [-604 a +100] μm, p = 0,06). Posteriormente, el grupo T&E mantuvo esta tendencia, llegando al nivel más bajo de EFC a los 36 meses, mientras que el grupo PRN mostró un aumento en los valores de EFC (PRN -104 [-807,7 a +297] μm y T&E -103 [-575 a +244], μm p = 0,63). Los pacientes tratados con el régimen T&E recibieron un número significativamente mayor de inyecciones (PRN 16,3 ± 7,6 vs. T&E 23,9 ± 9,4, p <0,01). CONCLUSIÓN: Los resultados demostraron una tendencia de T&E a conseguir valores más altos de MAVC, llegando al máximo a los 12 meses, y grosores menores de EFC al final de tres años. A pesar del mayor número de inyecciones en el grupo T&E, la media de MAVC revirtió a los valores de base a los tres años


PURPOSE: Evaluate and compare the visual and morphological results of Pro re nata (PRN) and treat-and-extend (T&E) treatment regimens at 3 years in real world clinical practice. METHODS: Retrospective study of patients with neovascular age macular: degeneration (AMD) treated with anti-VEGF with 3 years of continuous follow-up and no previous anti-VEGF treatment. Best corrected visual acuity (BCVA), central foveal thickness (CFT) and number of intravitreal injections outcomes were tested for statistical differences between the two groups at baseline and during follow-up. RESULTS: A total of 240 eyes were included in the study, 170 in the PRN group and 70 in the T&E group. At 12 months, mean BCVA (ETDRS letters) gain from baseline was at its highest point in the T&E group (+6.38 ± 13.32; p = 0.25). In the PRN group, BCVA peaked at 3 months and slowly decreased until end of follow-up. With both regimens, from baseline, CFT continued to decrease until the second year (PRN -138.81 [-846.7 to +162.77] and T&E -81 [-604 to +100] μm, p = 0.06). After that, T&E group maintained this tendency, reaching the lowest CFT value at 36 months, whereas PRN group showed an increased in CFT values (PRN -104 [-807.7 to +297] μm and T&E -103 [-575 to +244], μm p = 0.63). Patients treated with T&E regimen received a significantly higher number of injections (PRN 16.3 ± 7.6 vs T&E 23.9 ± 9.4, p < 0.01). CONCLUSION: Our results demonstrated a trend towards for T&E to achieve higher marks in BCVA, peaking at 12 months, and lower CFT thickness at the end of three years. Despite the higher number of injections performed in the T&E group the mean BCVA reverts to baseline values at 3 years


Subject(s)
Humans , Male , Female , Middle Aged , Aged , Aged, 80 and over , Macular Degeneration/drug therapy , Intravitreal Injections/methods , Bevacizumab/administration & dosage , Macular Degeneration/complications , Macular Degeneration/diagnostic imaging , Fundus Oculi , Tomography, Optical Coherence , Fluorescein Angiography , Visual Acuity , Treatment Outcome , Choroidal Neovascularization
2.
Arch Soc Esp Oftalmol (Engl Ed) ; 95(6): 263-270, 2020 Jun.
Article in English, Spanish | MEDLINE | ID: mdl-32370878

ABSTRACT

PURPOSE: Evaluate and compare the visual and morphological results of Pro re nata (PRN) and treat-and-extend (T&E) treatment regimens at 3 years in real world clinical practice. METHODS: Retrospective study of patients with neovascular age macular degeneration (AMD) treated with anti-VEGF with 3 years of continuous follow-up and no previous anti-VEGF treatment. Best corrected visual acuity (BCVA), central foveal thickness (CFT) and number of intravitreal injections outcomes were tested for statistical differences between the two groups at baseline and during follow-up. RESULTS: A total of 240 eyes were included in the study, 170 in the PRN group and 70 in the T&E group. At 12 months, mean BCVA (ETDRS letters) gain from baseline was at its highest point in the T&E group (+6.38±13.32; p=0.25). In the PRN group, BCVA peaked at 3 months and slowly decreased until end of follow-up. With both regimens, from baseline, CFT continued to decrease until the second year (PRN -138.81 [-846.7 to +162.77] and T&E -81 [-604 to +100] µm, p=0.06). After that, T&E group maintained this tendency, reaching the lowest CFT value at 36 months, whereas PRN group showed an increased in CFT values (PRN -104 [-807.7 to +297] µm and T&E -103 [-575 to +244], µm p=0.63). Patients treated with T&E regimen received a significantly higher number of injections (PRN 16.3±7.6 vs T&E 23.9 ±9.4, p<0.01). CONCLUSION: Our results demonstrated a trend towards for T&E to achieve higher marks in BCVA, peaking at 12 months, and lower CFT thickness at the end of three years. Despite the higher number of injections performed in the T&E group the mean BCVA reverts to baseline values at 3 years.


Subject(s)
Bevacizumab/administration & dosage , Macular Degeneration/drug therapy , Ranibizumab/administration & dosage , Receptors, Vascular Endothelial Growth Factor/administration & dosage , Recombinant Fusion Proteins/administration & dosage , Aged , Aged, 80 and over , Clinical Protocols , Female , Follow-Up Studies , Humans , Intravitreal Injections , Male , Retrospective Studies , Treatment Outcome , Vascular Endothelial Growth Factors/antagonists & inhibitors
3.
Carbohydr Polym ; 230: 115562, 2020 Feb 15.
Article in English | MEDLINE | ID: mdl-31887918

ABSTRACT

This work describes the production of polysaccharide multilayer capsules to control the release of Eugenol (Eug) and enabling its use as an antimicrobial agent. For this propose, oil-in-water nanoemulsions of sodium dodecyl sulfate were coated with alternating depositions of chitosan and carboxymethylcellulose using the Layer-by-Layer (LbL) technique, resulting in capsules containing 1-5 layers. The average size ranged from 188 ±â€¯30 (LbL1) to 1415 ±â€¯517 nm (LbL5). The maximum incorporation efficiency was 70.8 ±â€¯2.7 % for Eug-SDS-LbL1. The initial burst releases decreased in proportion to the increase in the number of polysaccharide layers (22.3 ±â€¯3.1 %-12.8 ±â€¯1.6 %), and are influenced by the pH. These systems exhibited antifungal activity against Aspergillus niger, Trichoderma sp, Gliocladium sp, and Candida albicans, and Eug minimum inhibitory concentrations were lower as compared to those of the free agent. Therefore, these capsules represent promising antifungal materials for application in various fields.


Subject(s)
Anti-Infective Agents/chemistry , Capsules/chemistry , Eugenol/chemistry , Polysaccharides/chemistry , Anti-Infective Agents/pharmacology , Aspergillus/drug effects , Aspergillus/pathogenicity , Candida albicans/drug effects , Candida albicans/pathogenicity , Capsules/pharmacology , Chitosan/chemistry , Eugenol/pharmacology , Microbial Sensitivity Tests , Polysaccharides/pharmacology , Sodium Dodecyl Sulfate/chemistry
4.
J Orthop Res ; 36(11): 2901-2910, 2018 11.
Article in English | MEDLINE | ID: mdl-29809295

ABSTRACT

Tissue engineering is a promising approach for the repair of articular cartilage defects, with engineered constructs emerging that match native tissue properties. However, the inflammatory environment of the damaged joint might compromise outcomes, and this may be impacted by the choice of cell source in terms of their ability to operate anabolically in an inflamed environment. Here, we compared the response of engineered cartilage derived from native chondrocytes and mesenchymal stem cells (MSCs) to challenge by TNFα and IL-1ß in order to determine if either cell type possessed an inherent advantage. Compositional (extracellular matrix) and functional (mechanical) characteristics, as well as the release of catabolic mediators (matrix metalloproteinases [MMPs], nitric oxide [NO]) were assessed to determine cell- and tissue-level changes following exposure to IL-1ß or TNF-α. Results demonstrated that MSC-derived constructs were more sensitive to inflammatory mediators than chondrocyte-derived constructs, exhibiting a greater loss of proteoglycans and functional properties at lower cytokine concentrations. While MSCs and chondrocytes both have the capacity to form functional engineered cartilage in vitro, this study suggests that the presence of an inflammatory environment is more likely to impair the in vivo success of MSC-derived cartilage repair. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:2901-2910, 2018.


Subject(s)
Chondrocytes/physiology , Interleukin-1beta/physiology , Mesenchymal Stem Cells/physiology , Tissue Engineering , Tumor Necrosis Factor-alpha/physiology , Animals , Cattle , Glycosaminoglycans/metabolism , Matrix Metalloproteinases/metabolism , Nitric Oxide/metabolism
5.
Oper Dent ; 39(5): 530-40, 2014.
Article in English | MEDLINE | ID: mdl-24502754

ABSTRACT

PURPOSE: To evaluate the survival rate, success rate, load to fracture, and finite element analysis (FEA) of maxillary central incisors and canines restored using ceramic veneers and varying preparation designs. METHODS AND MATERIALS: Thirty human maxillary central incisors and 30 canines were allocated to the following four groups (n=15) based on the preparation design and type of tooth: Gr1 = central incisor with a conservative preparation; Gr2 = central incisor with a conventional preparation with palatal chamfer; Gr3 = canine with a conservative preparation; Gr4 = canine with a conventional preparation with palatal chamfer. Ceramic veneers (lithium disilicate) were fabricated and adhesively cemented (Variolink Veneer). The specimens were subjected to 4 × 10(6) mechanical cycles and evaluated at every 500,000 cycles to detect failures. Specimens that survived were subjected to a load to fracture test. Bidimensional models were modeled (Rhinoceros 4.0) and evaluated (MSC.Patrans 2005r2 and MSC.Marc 2005r2) on the basis of their maximum principal stress (MPS) values. Survival rate values were analyzed using the Kaplan-Meier test (α = 0.05) and load to fracture values were analyzed using the Student t-test (α = 0.05). RESULTS: All groups showed 100% survival rates. The Student t-test did not show any difference between the groups for load to fracture. FEA showed higher MPS values in the specimens restored using veneers with conventional preparation design with palatal chamfer. CONCLUSION: Preparation design did not affect the fracture load of canines and central incisors, but the veneers with conventional preparation design with palatal chamfer exhibited a tendency to generate higher MPS values.


Subject(s)
Ceramics , Cuspid , Dental Veneers , Incisor , Tooth Fractures , Finite Element Analysis , Humans
6.
J Dent Res ; 90(3): 365-70, 2011 Mar.
Article in English | MEDLINE | ID: mdl-21098474

ABSTRACT

The literature shows contradictory results regarding the role of composite shrinkage and elastic modulus as determinants of polymerization stress. The present study aimed at a better understanding of the test mechanics that could explain such divergences among studies. The hypothesis was that the effects of composite shrinkage and elastic modulus on stress depend upon the compliance of the testing system. A commonly used test apparatus was simulated by finite element analysis, with different compliance levels defined by the bonding substrate (steel, glass, composite, or acrylic). Composites with moduli between 1 and 12 GPa and shrinkage values between 0.5% and 6% were modeled. Shrinkage was simulated by thermal analogy. The hypothesis was confirmed. When shrinkage and modulus increased simultaneously, stress increased regardless of the substrate. However, if shrinkage and modulus were inversely related, their magnitudes and interaction with rod material determined the stress response.


Subject(s)
Composite Resins/chemistry , Dental Stress Analysis/methods , Materials Testing/methods , Compliance , Dental Stress Analysis/instrumentation , Elastic Modulus , Finite Element Analysis , Materials Testing/instrumentation , Stress, Mechanical , Transition Temperature
7.
J Dent Res ; 89(6): 587-91, 2010 Jun.
Article in English | MEDLINE | ID: mdl-20348486

ABSTRACT

The clinical success of fiber posts has been attributed to their lower elastic modulus. The tested hypothesis was that fiber posts could lead to lower risk of post debonding and lower risk of root fracture, despite an increase in root stresses. Stress analyses were carried out with a 3D finite element model of a premolar restored with a metallic or a fiber post. Bonded and non-bonded post/cement interface conditions were simulated. We calculated risk-of-fracture indices by determining the highest principal stress values divided by the tensile strength. Shear stresses along the post/cement interface were analyzed for the bonded models. Compared with the premolar restored with a metallic post, the fiber post generated lower stresses along the interface and higher stresses in the root. However, with the fiber post, fracture was less likely to occur in the root, since its core and post fracture indices were higher.


Subject(s)
Dental Materials/chemistry , Dental Prosthesis Design , Glass/chemistry , Post and Core Technique/instrumentation , Tooth Fractures/prevention & control , Tooth Root/physiology , Bicuspid/pathology , Biomechanical Phenomena , Composite Resins/chemistry , Computer Simulation , Dental Alloys/chemistry , Dental Bonding , Dental Stress Analysis , Elastic Modulus , Finite Element Analysis , Humans , Imaging, Three-Dimensional , Materials Testing , Models, Biological , Resin Cements/chemistry , Risk Factors , Shear Strength , Stress, Mechanical , Tensile Strength , Tooth Root/injuries , Tooth, Nonvital/pathology
11.
Rev. bras. saúde ocup ; 10(40): 68-76, out.-dez. 1982.
Article in Portuguese | LILACS | ID: lil-13509

ABSTRACT

O autor, responsavel pelo Servico Medico de uma industria quimica, realca a importancia do absentismo por enfermidade, citando causas e sugerindo controle criterioso do fenomeno. Enumera algumas medidas de controle e mostra a evolucao registrada nos ultimos doze anos, na qual se verifica apos um crescimento acentuado, uma tendencia a certa estabilidade. Descreve, em seguida, um estudo implantado a partir de 1977, atraves de computacao, o qual permite a emissao de relatorios detalhados e acessiveis para analise e demonstra as possibilidades do novo sistema. Com base nos resultados observados nesse periodo, tece comentarios sobre a necessidade de uniformizacao dos dados referentes ao absentismo para obtencao de estatistica confiavel e passivel de comparacao


Subject(s)
Humans , Absenteeism , Occupational Medicine
12.
Arq Gastroenterol ; 19(2): 77-80, 1982.
Article in Portuguese | MEDLINE | ID: mdl-6764357

ABSTRACT

A case of one patient with hepatosplenic Schistosomiasis mansoni in association with histiocytic lymphoma is presented. The authors discuss the concomitance of the two pathologic processes, by comparing with other cases of the literature and speculating about its significance, there is the possibility of the schistosomiasis being related as the causing factor of the malignant disease.


Subject(s)
Lymphoma, Large B-Cell, Diffuse/complications , Schistosomiasis/complications , Splenic Neoplasms/complications , Adult , Humans , Liver/pathology , Lymphoma, Large B-Cell, Diffuse/pathology , Male , Schistosoma mansoni , Splenic Neoplasms/pathology
13.
Arq. gastroenterol ; 19(2): 77-80, 1982.
Article in Portuguese | LILACS | ID: lil-7083

ABSTRACT

Apresenta-se um caso de paciente portador de esquistossomose mansonica hepatoesplenica e linfoma histiocitico. Comenta-se a concomitancia dos dois processos patologicos, confrontando-se com outros casos da literatura e especulando-se sobre seu significado, havendo a possibilidade da esquistossomose ser relacionada como fator causal da doenca maligna


Subject(s)
Lymphatic Diseases , Lymphoma , Schistosomiasis , Liver Diseases, Parasitic , Splenic Diseases
14.
J Bone Joint Surg Am ; 60(1): 86-90, 1978 Jan.
Article in English | MEDLINE | ID: mdl-624763

ABSTRACT

Occupational acro-osteolysis is a serious disease definitely related to the inhalation of agents involved in the polymerization of vinyl chloride. After variable periods of latency, the more or less characteristic clinical picture appears. A Raynaud's phenomenon is usually a premonitory sign indicating that alterations in bone will probably ensue. Scleroderma-like skin lesions and systemic involvement of variable degree occur frequently. The pathophysiology of the disease is unknown, but obstructive lesions of small peripheral arteries are thought to cause osteolysis of the distal phalanges of the fingers.


Subject(s)
Bone Resorption/etiology , Fingers , Occupational Diseases/etiology , Osteolysis/etiology , Adult , Fingers/diagnostic imaging , Humans , Male , Occupational Diseases/complications , Occupational Diseases/diagnostic imaging , Osteolysis/complications , Osteolysis/diagnostic imaging , Radiography , Raynaud Disease/complications
SELECTION OF CITATIONS
SEARCH DETAIL
...