ABSTRACT
State-of-the-art industrial electrocatalysts for the oxygen evolution reaction (OER) under acidic conditions are Ir-based. Considering the scarce supply of Ir, it is imperative to use the precious metal as efficiently as possible. In this work, we immobilized ultrasmall Ir and Ir0.4Ru0.6 nanoparticles on two different supports to maximize their dispersion. One high-surface-area carbon support serves as a reference but has limited technological relevance due to its lack of stability. The other support, antimony-doped tin oxide (ATO), has been proposed in the literature as a possible better support for OER catalysts. Temperature-dependent measurements performed in a recently developed gas diffusion electrode (GDE) setup reveal that surprisingly the catalysts immobilized on commercial ATO performed worse than their carbon-immobilized counterparts. The measurements suggest that the ATO support deteriorates particularly fast at elevated temperatures.
ABSTRACT
Platinum is one of the best-performing catalysts for the hydrogen evolution reaction (HER). However, high cost and scarcity severely hinder the large-scale application of Pt electrocatalysts. Constructing highly dispersed ultrasmall Platinum entities is thereby a very effective strategy to increase Pt utilization and mass activities, and reduce costs. Herein, highly dispersed Pt entities composed of a mixture of Pt single atoms, clusters, and nanoparticles are synthesized on mesoporous N-doped carbon nanospheres. The presence of Pt single atoms, clusters, and nanoparticles is demonstrated by combining among others aberration-corrected annular dark-field scanning transmission electron microscopy, X-ray absorption spectroscopy, and electrochemical CO stripping. The best catalyst exhibits excellent geometric and Pt HER mass activity, respectively ≈4 and 26 times higher than that of a commercial Pt/C reference and a Pt catalyst supported on nonporous N-doped carbon nanofibers with similar Pt loadings. Noteworthily, after optimization of the geometrical Pt electrode loading, the best catalyst exhibits ultrahigh Pt and catalyst mass activities (56 ± 3 A mg-1 Pt and 11.7 ± 0.6 A mg-1 Cat at -50 mV vs. reversible hydrogen electrode), which are respectively ≈1.5 and 58 times higher than the highest Pt and catalyst mass activities for Pt single-atom and cluster-based catalysts reported so far.
ABSTRACT
In this work Pt@TiO2 nanocomposite electrocatalysts for methanol oxidation were synthesized using a one-pot process by hydrophobic nanoreactor templating. TiO2 was used as a support material for the platinum nanoparticles, thereby providing strong metal-support interactions. The Pt@TiO2 electrocatalyst consists of a monolayer of spherical superstructures comprising finely dispersed platinum nanoparticles in a crystalline TiO2 matrix as revealed by high resolution (scanning) transmission electron microscopy (HR-TEM and HR-STEM) combined with energy dispersive X-ray spectroscopy (EDX), electron diffraction and X-ray photoelectron spectroscopy (XPS). The Pt@TiO2 electrocatalyst showed high methanol oxidation activity, exceeding the activity of a commercial Pt/C catalyst by a factor of 2.5, as well as a cathodically shifted methanol oxidation peak. The increased methanol oxidation activity of Pt@TiO2 was attributed to its enhanced CO oxidation ability, an undesired intermediate, which is formed during methanol oxidation and poisons the Pt-surface. Indeed, CO stripping experiments confirmed that CO oxidation takes place at lower potentials in the case of Pt@TiO2, leading to a cathodic shift of the CO oxidation peak by 100 mV compared to a commercial Pt/C reference catalyst. Insights into the mechanism of methanol oxidation on Pt@TiO2 were found by comparison of methanol oxidation in different electrolytes. It was found that methanol oxidation via the CO-route is more pronounced on Pt@TiO2 than on Pt/C. The improved activity for CO oxidation resulted thereby in a better catalyst performance, especially at low potentials, and an increased stability, as demonstrated by chronoamperometry. The long-term stability of the catalyst was further addressed by accelerated stress tests (AST), which showed that the superior catalytic activity is retained even after 30 000 potential cycles.
ABSTRACT
N-doped carbon materials are discussed as catalyst supports for the electrochemical oxygen reduction reaction (ORR) in fuel cells. This work deals with the preparation of Pt nanoparticles (NPs) supported on N-doped carbon nanofibers (N-CNF) from a polyaniline nanofiber (PANI NF) precursor, and investigates the ORR activity of the produced materials. Initially, Pt NPs are deposited on PANI NFs. The PANI NF precursors are characterized by near-edge X-ray absorption fine structure (NEXAFS) and transmission electron microscopy (TEM) measurements. It is shown, that in the PANI NF precursor materials electrons from the Pt are being transferred toward the π-conjugated systems of the aromatic ring. This strong interaction of Pt atoms with PANI explains the high dispersion of Pt NPs on the PANI NF. Subsequently, the PANI NF precursors are carbonized at different heat-treatment conditions resulting in structurally different N-CNFs which are characterized by NEXAFS, X-ray photoelectron spectroscopy (XPS) ,and TEM measurements. It is shown that an interaction between N-groups and Pt NPs exists in all investigated N-CNFs. However, the N-CNFs differ in the composition of the N-species and the dispersion of the Pt NPs. A small mean Pt NP size with a narrow size distribution is attributed to the presence of pyrdinic N-groups in the N-CNFs, whereas, for the N-CNFs with mainly graphitic and pyrrolic N-groups, an increase in the average Pt NP size with a broad size distribution is found. The ORR activity in alkaline media investigated by Koutecky-Levich analysis of rotating disk electrode measurements showed a largely enhanced ORR activity in comparison to a conventional Pt/C catalyst.
ABSTRACT
The degradation of LiNi0.8Co0.15Al0.05O2 (LNCAO) is reflected by the electrochemical performance in the fatigued state and correlated with the redox behavior of these cathodes. The detailed electrochemical performance of these samples is investigated by galvanostatic and voltammetric cycling as well as with the galvanostatic intermittent titration technique (GITT). Near-edge X-ray absorption fine structure (NEXAFS) spectroscopy was used to investigate the oxidation state of all three materials at the Ni L2,3, O K, and Co L2,3 edges at five different states of charge. Surface and more bulklike properties are distinguished by total electron yield (TEY) and fluorescence yield (FY) measurements. The electrochemical investigations revealed that the changes in the cell performance of the differently aged materials can be explained by considering the reaction kinetics of the intercalation/deintercalation process. The failure of the redox process of oxygen and nickel at low voltages leads to a significant decrease of the reaction rates in the fatigued cathodes. The accompanied cyclic voltammogram (CV) peaks appear as two peaks because of the local minimum of the reaction rate, although it is one peak in the CV of the calendarically aged LNCAO. The absence of the oxidation/reduction process at low voltages can be traced back to changes in the surface morphology (formation of a NiO-like structure). Further consequences of these material changes are overpotentials, which lead to capacity losses of up to 30% (cycled with a C/3 rate).
