Reentrant semiconducting behavior in polymerized fullerite structures with increasing sp3-carbon content.

The electronic behavior of polymerized fullerite structures, ranging from one-dimensional to three-dimensional polymers, was studied using density functional theory with the hybrid Heyd-Scuseria-Ernzerhof functional and a 6-31G(d,p) basis set. The bandgap across these structures decreases with the rise of sp3-carbon content until metallic behavior is observed. A further increase induces a reopening of the bandgap, revealing a reentrant semiconducting behavior in this class of materials. This behavior is understood in terms of the new electronic states originated by polymeric bonding and the effect of the volume reduction on the dispersion of sp2-states. This study highlights the fullerite polymers as a magnificent platform to tune electronic properties.

Crystallization of molecular layers produced under confinement onto a surface.

It is well known that molecules confined very close to a surface arrange into molecular layers. Because solid-liquid interfaces are ubiquitous in the chemical, biological and physical sciences, it is crucial to develop methods to easily access molecular layers and exploit their distinct properties by producing molecular layered crystals. Here we report a method based on crystallization in ultra-thin puddles enabled by gas blowing, which allows to produce molecular layered crystals with thickness down to the monolayer onto a surface, making them directly accessible for characterization and further processing. By selecting four molecules with different types of polymorphs, we observed exclusive crystallization of polymorphs with Van der Waals interlayer interactions, which have not been observed with traditional confinement methods. In conclusion, the gas blowing approach unveils the opportunity to perform materials chemistry under confinement onto a surface, enabling the formation of distinct crystals with selected polymorphism.

Molecular Graphene Nanoribbon Junctions.

One of the challenges for the realization of molecular electronics is the design of nanoscale molecular wires displaying long-range charge transport. Graphene nanoribbons are an attractive platform for the development of molecular wires with long-range conductance owing to their unique electrical properties. Despite their potential, the charge transport properties of single nanoribbons remain underexplored. Herein, we report a synthetic approach to prepare N-doped pyrene-pyrazinoquinoxaline molecular graphene nanoribbons terminated with diamino anchoring groups at each end. These terminal groups allow for the formation of stable molecular graphene nanoribbon junctions between two metal electrodes that were investigated by scanning tunneling microscope-based break-junction measurements. The experimental and computational results provide evidence of long-range tunneling charge transport in these systems characterized by a shallow conductance length dependence and electron tunneling through >6 nm molecular backbone.

Sequential On-Surface Cyclodehydrogenation in a Nonplanar Nanographene.

On-surface synthesis has emerged as an attractive method for the atomically precise synthesis of new molecular nanostructures, being complementary to the widespread approach based on solution chemistry. It has been particularly successful in the synthesis of graphene nanoribbons and nanographenes. In both cases, the target compound is often generated through cyclodehydrogenation reactions, leading to planarization and the formation of hexagonal rings. To improve the flexibility and tunability of molecular units, however, the incorporation of other, nonbenzenoid, subunits is highly desirable. In this letter, we thoroughly analyze sequential cyclodehydrogenation reactions with a custom-designed molecular precursor. We demonstrate the step-by-step formation of hexagonal and pentagonal rings from the nonplanar precursor within fjord and cove regions, respectively. Computer models comprehensively support the experimental observations, revealing that both reactions imply an initial hydrogen abstraction and a final [1,2] hydrogen shift, but the formation of a pentagonal ring proceeds through a radical mechanism.

Modulating Strain in Twisted Pyrene-Fused Azaacenes.

The design and synthesis of strained aromatics provide an additional insight into the relationship between structure and properties. In the last years, several approaches to twist pyrene-fused azaacenes have been developed that allow to introduce twists of different sizes. Herein, we describe the synthesis of a new set of twisted dibenzotetraazahexacenes constituted by fused pyrene and quinoxaline residues that have been distorted by introducing increasingly larger substituents on the quinoxaline residues. Their twisted structure has been demonstrated by single-crystal X-ray diffraction. Furthermore, absorption, fluorescence, electrochemical and theoretical studies shine light on the effects of the substituents and twists on the optoelectronic and redox properties.

Direct C-H Arylation of Dithiophene-Tetrathiafulvalene: Tuneable Electronic Properties and 2D Self-Assembled Molecular Networks at the Solid/Liquid Interface.

Invited for the cover of this issue is the group of Manuel Souto and co-workers at the University of Aveiro and CICECO-Aveiro Institute of Materials. The image depicts the direct C-H arylation of dithiophene-tetrathiafulvalene (DT-TTF) and the self-assembly of DT-TTF-tetrabenzoic acid studied by using scanning tunnelling microscopy. Read the full text of the article at 10.1002/chem.202300572.

Non-Canonical Amino Acids as Building Blocks for Peptidomimetics: Structure, Function, and Applications.

This review provides a fresh overview of non-canonical amino acids and their applications in the design of peptidomimetics. Non-canonical amino acids appear widely distributed in nature and are known to enhance the stability of specific secondary structures and/or biological function. Contrary to the ubiquitous DNA-encoded amino acids, the structure and function of these residues are not fully understood. Here, results from experimental and molecular modelling approaches are gathered to classify several classes of non-canonical amino acids according to their ability to induce specific secondary structures yielding different biological functions and improved stability. Regarding side-chain modifications, symmetrical and asymmetrical α,α-dialkyl glycines, Cα to Cα cyclized amino acids, proline analogues, ß-substituted amino acids, and α,ß-dehydro amino acids are some of the non-canonical representatives addressed. Backbone modifications were also examined, especially those that result in retro-inverso peptidomimetics and depsipeptides. All this knowledge has an important application in the field of peptidomimetics, which is in continuous progress and promises to deliver new biologically active molecules and new materials in the near future.

Unveiling the Role of Capping Groups in Naphthalene N-Capped Dehydrodipeptide Hydrogels.

Self-assembled peptide-based hydrogels are archetypical nanostructured materials with a plethora of foreseeable applications in nanomedicine and as biomaterials. N-protected di- and tri-peptides are effective minimalist (molecular) hydrogelators. Independent variation of the capping group, peptide sequence and side chain modifications allows a wide chemical space to be explored and hydrogel properties to be tuned. In this work, we report the synthesis of a focused library of dehydrodipeptides N-protected with 1-naphthoyl and 2-naphthylacetyl groups. The 2-naphthylacetyl group was extensively reported for preparation of peptide-based self-assembled hydrogels, whereas the 1-naphthaloyl group was largely overlooked, owing presumably to the lack of a methylene linker between the naphthalene aromatic ring and the peptide backbone. Interestingly, dehydrodipeptides N-capped with the 1-naphthyl moiety afford stronger gels, at lower concentrations, than the 2-naphthylacetyl-capped dehydrodipeptides. Fluorescence and circular dichroism spectroscopy showed that the self-assembly of the dehydrodipeptides is driven by intermolecular aromatic π-π stacking interactions. Molecular dynamics simulations revealed that the 1-naphthoyl group allows higher order aromatic π-π stacking of the peptide molecules than the 2-naphthylacetyl group, together with hydrogen bonding of the peptide scaffold. The nanostructure of the gel networks was studied by TEM and STEM microscopy and was found to correlate well with the elasticity of the gels. This study contributes to understanding the interplay between peptide and capping group structure on the formation of self-assembled low-molecular-weight peptide hydrogels. Moreover, the results presented here add the 1-naphthoyl group to the palette of capping groups available for the preparation of efficacious low-molecular-weight peptide-based hydrogels.

Hydrogen-Terminated Two-Dimensional Germanane/Silicane Alloys as Self-Powered Photodetectors and Sensors.

2D monoelemental materials, particularly germanene and silicene (the single layer of germanium and silicon), which are the base materials for modern electronic devices demonstrated tremendous attraction for their 2D layer structure along with the tuneable electronics and optical band gap. The major shortcoming of synthesized thermodynamically very unstable layered germanene and silicene with their inclination toward oxidation was overcome by topochemical deintercalation of a Zintl phase (CaGe2, CaGe1.5Si0.5, and CaGeSi) in a protic environment. The exfoliated Ge-H, Ge0.75Si0.25H, and Ge0.5Si0.5H were successfully synthesized and employed as the active layer for photoelectrochemical photodetectors, which showed broad response (420-940 nm), unprecedented responsivity, and detectivity on the order of 168 µA W-1 and 3.45 × 108 cm Hz1/2 W-1, respectively. The sensing capability of exfoliated germanane and silicane composites was explored using electrochemical impedance spectroscopy with ultrafast response and recovery time of less than 1 s. These positive findings serve as the application of exfoliated germanene and silicene composites and can pave a new path to practical applications in efficient future devices.

Direct C-H Arylation of Dithiophene-Tetrathiafulvalene: Tuneable Electronic Properties and 2D Self-Assembled Molecular Networks at the Solid/Liquid Interface.

Tetrathiafulvalene is among the best known building blocks in molecular electronics due to its outstanding electron-donating and redox properties. Among its derivatives, dithiophene-tetrathiafulvalene (DT-TTF) has attracted considerable interest in organic electronics, owing to its high field-effect mobility. Herein, we report the direct C-H arylation of DT-TTF to synthesise mono- and tetraarylated derivatives functionalised with electron-withdrawing and electron-donating groups in order to evaluate their influence on the electronic properties by cyclic voltammetry, UV-vis spectroscopy and theoretical calculations. Self-assembly of the DT-TTF-tetrabenzoic acid derivative was studied by using scanning tunnelling microscopy (STM) which revealed the formation of ordered, densely packed 2D hydrogen-bonded networks at the graphite/liquid interface. The tetrabenzoic acid derivative can attain a planar geometry on the graphite surface due to van der Waals interactions with the surface and H-bonding with neighbouring molecules. This study demonstrates a simple method for the synthesis of arylated DT-TTF derivatives towards the design and construction of novel π-extended electroactive frameworks.

2D Layered Bimetallic Phosphorous Trisulfides MI MIII P2 S6 (MI = Cu, Ag; MIII = Sc, V, Cr, In) for Electrochemical Energy Conversion.

Considerable improvements in the electrocatalytic activity of 2D metal phosphorous trichalcogenides (M2 P2 X6 ) have been achieved for water electrolysis, mostly with MII 2 [P2 X6 ]4- as catalysts for hydrogen evolution reaction (HER). Herein, MI MIII P2 S6 (MI  = Cu, Ag; MIII  = Sc, V, Cr, In) are synthesized and tested for the first time as electrocatalysts in alkaline media, towards oxygen reduction reaction (ORR) and HER. AgScP2 S6 follows a 4 e- pathway for the ORR at 0.74 V versus reversible hydrogen electrode; CuScP2 S6 is active for HER, exhibiting an overpotential of 407 mV and a Tafel slope of 90 mV dec-1 . Density functional theory models reveal that bulk AgScP2 S6 and CuScP2 S6 are both semiconductors with computed bandgaps of 2.42 and 2.23 eV, respectively and overall similar electronic properties. Besides composition, the largest difference in both materials is in their molecular structure, as Ag atoms sit at the midpoint of each layer alongside Sc atoms, while Cu atoms are raised to a similar height to S atoms, in the external segment of the 2D layers. This structural difference probably plays a fundamental role in the different catalytic performances of these materials. These findings show that MI (Cu, Ag) together with Sc(MIII ) leads to promising achievements in MI MIII P2 S6 materials as electrocatalysts.

An Organic Molecular Nanobarrel that Hosts and Solubilizes C60.

Organic cages have gained increasing attention in recent years as molecular hosts and porous materials. Among these, barrel-shaped cages or molecular nanobarrels are promising systems to encapsulate large hosts as they possess windows of the same size as their internal cavity. However, these systems have received little attention and remain practically unexplored despite their potential. Herein, we report the design and synthesis of a new trigonal prismatic organic nanobarrel with two large triangular windows with a diameter of 12.7 Šoptimal for the encapsulation of C60 . Remarkably, this organic nanobarrel shows a high affinity for C60 in solvents in which C60 is virtually insoluble, providing stable solutions of C60 .

Thermoelectric Properties of N-Type Poly (Ether Ether Ketone)/Carbon Nanofiber Melt-Processed Composites.

The thermoelectric properties, at temperatures from 30 °C to 100 °C, of melt-processed poly(ether ether ketone) (PEEK) composites prepared with 10 wt.% of carbon nanofibers (CNFs) are discussed in this work. At 30 °C, the PEEK/CNF composites show an electrical conductivity (σ) of ~27 S m-1 and a Seebeck coefficient (S) of -3.4 µV K-1, which means that their majority charge carriers are electrons. The origin of this negative Seebeck is deduced because of the impurities present in the as-received CNFs, which may cause sharply varying and localized states at approximately 0.086 eV above the Fermi energy level (EF) of CNFs. Moreover, the lower S, in absolute value, found in PEEK/CNF composites, when compared with the S of as-received CNFs (-5.3 µV K-1), is attributed to a slight electron withdrawing from the external layers of CNFs by the PEEK matrix. At temperatures from 30 °C to 100 °C, the σ (T) of PEEK/CNF composites, in contrast to the σ (T) of as-received CNFs, shows a negative temperature effect, understood through the 3D variable-range hopping (VRH) model, as a thermally activated hopping mechanism across a random network of potential wells. Moreover, their nonlinear S (T) follows the same behavior reported before for polypropylene composites melt-processed with similar CNFs at the same interval of temperatures.

A Crystalline 1D Dynamic Covalent Polymer.

The synthesis of crystalline one-dimensional polymers provides a fundamental understanding about the structure-property relationship in polymeric materials and allows the preparation of materials with enhanced thermal, mechanical, and conducting properties. However, the synthesis of crystalline one-dimensional polymers remains a challenge because polymers tend to adopt amorphous or semicrystalline phases. Herein, we report the synthesis of a crystalline one-dimensional polymer in solution by dynamic covalent chemistry. The structure of the polymer has been unambiguously confirmed by microcrystal electron diffraction that together with charge transport studies and theoretical calculations show how the π-stacked chains of the polymer generate optimal channels for charge transport.

Unravelling the Complete Raman Response of Graphene Nanoribbons Discerning the Signature of Edge Passivation.

Controlling the edge morphology and terminations of graphene nanoribbons (GNR) allows tailoring their electronic properties and boosts their application potential. One way of making such structures is encapsulating them inside single-walled carbon nanotubes. Despite the versatility of Raman spectroscopy to resolve strong spectral signals of these systems, discerning the response of long nanoribbons from that of any residual precursor remaining outside after synthesis has been so far elusive. Here, the terrylene dye is used as precursor to make long and ultra-narrow armchair-edged GNR inside nanotubes. The alignment and characteristic length of terrylene encapsulated parallel to the tube's axis facilitates the ribbon formation via polymerization, with high stability up to 750 °C when the hybrid system is kept in high vacuum. A high temperature annealing is used to remove the terrylene external molecules and a subtraction model based on the determination of a scaling factor related to the G-band response of the system is developed. This not only represents a critical step forward toward the analysis of the nanoribbon-nanotube system, but it is a study that enables unraveling the Raman signatures of the individual CH-modes (the signature of edge passivation) for GNR for the first time with unprecedented detail.

Planar and Helical Dinaphthophenazines.

In this study, we report the synthesis of a series of planar and helical dinaphthophenazines by cyclocondensation reactions between the newly developed 9,10-bis((triisopropylsilyl)ethynyl)anthracene-1,2-dione and different diamines. Their optoelectronic and electrochemical properties are studied by ultraviolet-visible (UV-vis) spectroscopy, fluorescence spectroscopy, cyclic voltammetry, and density functional theory calculations.

Doubling the Length of the Longest Pyrene-Pyrazinoquinoxaline Molecular Nanoribbons.

Molecular nanoribbons are a class of atomically-precise nanomaterials for a broad range of applications. An iterative approach that allows doubling the length of the longest pyrene-pyrazinoquinoxaline molecular nanoribbons is described. The largest nanoribbon obtained through this approach-with a 60 linearly-fused ring backbone (14.9 nm) and a 324-atoms core (C276 N48 )-shows an extremely high molar absorptivity (values up to 1 198 074 M-1 cm-1 ) that also endows it with a high molar fluorescence brightness (8700 M-1 cm-1 ).

Observing polymerization in 2D dynamic covalent polymers.

The quality of crystalline two-dimensional (2D) polymers1-6 is intimately related to the elusive polymerization and crystallization processes. Understanding the mechanism of such processes at the (sub)molecular level is crucial to improve predictive synthesis and to tailor material properties for applications in catalysis7-10 and (opto)electronics11,12, among others13-18. We characterize a model boroxine 2D dynamic covalent polymer, by using in situ scanning tunnelling microscopy, to unveil both qualitative and quantitative details of the nucleation-elongation processes in real time and under ambient conditions. Sequential data analysis enables observation of the amorphous-to-crystalline transition, the time-dependent evolution of nuclei, the existence of 'non-classical' crystallization pathways and, importantly, the experimental determination of essential crystallization parameters with excellent accuracy, including critical nucleus size, nucleation rate and growth rate. The experimental data have been further rationalized by atomistic computer models, which, taken together, provide a detailed picture of the dynamic on-surface polymerization process. Furthermore, we show how 2D crystal growth can be affected by abnormal grain growth. This finding provides support for the use of abnormal grain growth (a typical phenomenon in metallic and ceramic systems) to convert a polycrystalline structure into a single crystal in organic and 2D material systems.

Inducing Single-Handed Helicity in a Twisted Molecular Nanoribbon.

Molecular conformation has an important role in chemistry and materials science. Molecular nanoribbons can adopt chiral twisted helical conformations. However, the synthesis of single-handed helically twisted molecular nanoribbons still represents a considerable challenge. Herein, we describe an asymmetric approach to induce single-handed helicity with an excellent degree of conformational discrimination. The chiral induction is the result of the chiral strain generated by fusing two oversized chiral rings and of the propagation of that strain along the nanoribbon's backbone.

An Expanded 2D Fused Aromatic Network with 90-Ring Hexagons.

Two-dimensional fused aromatic networks (2D FANs) have emerged as a highly versatile alternative to holey graphene. The synthesis of 2D FANs with increasingly larger lattice dimensions will enable new application perspectives. However, the synthesis of larger analogues is mostly limited by lack of appropriate monomers and methods. Herein, we describe the synthesis, characterisation and properties of an expanded 2D FAN with 90-ring hexagons, which exceed the largest 2D FAN lattices reported to date.