Fatigue and failure mode analyses of glass infiltrated 5Y-PSZ bonded onto dentin analogues.

The purpose of this study was to evaluate the fatigue survival of 5Y-PSZ zirconia infiltrated with an experimental glass and bonded onto dentin analogues. Disc-shaped specimens of a 5Y-PSZ (Katana UTML Kuraray Noritake) were cemented onto dentin analogs (NEMA G10) and divided into four groups (n = 15): Zctrl Group (control, without infiltration); Zglz Group (Glaze, compression surface); Zinf-comp Group (Experimental Glass, compression surface); Zinf-tens Group (Experimental Glass, tension surface). Surface treatments were varied. Cyclic fatigue loading, oblique transillumination, stereomicroscope examination, and scanning electron microscopy were performed. Fatigue data were analyzed (failure load and number of cycles) using survival analysis (Kaplan-Meier and Log-Rank Mantel-Cox). There was no statistically significant difference in fatigue survival between the Zglz, Zctrl, and Zinf-comp groups. The Zinf-tens group presented a significantly higher failure load when compared to the other groups and exhibited a different failure mode. The experimental glass effectively infiltrated the zirconia, enhancing structural reliability, altering the failure mode, and improving load-bearing capacity over more cycles, particularly in the group where the glass was infiltrated into the tensile surface of the zirconia. Glass infiltration into 5Y-PSZ zirconia significantly enhanced structural reliability and the ability to withstand loads over an increased number of cycles. This approach has the potential to increase the durability of zirconia restorations, reducing the need for replacements and save time and resources, promoting efficiency in clinical practice.

Role of the STING pathway in myeloid neoplasms: a prospero-registered systematic review of principal hurdles of STING on the road to the clinical practice.

Myeloid neoplasms are a group of bone marrow diseases distinguished by disruptions in the molecular pathways that regulate the balance between hematopoietic stem cell (HSC) self-renewal and the generation of specialized cells. Cytokines and chemokines, two important components of the inflammatory process, also influence hematological differentiation. In this scenario, immunological dysregulation plays a pivotal role in the pathogenesis of bone marrow neoplasms. The STING pathway recognizes DNA fragments in the cell cytoplasm and triggers an immune response by type I interferons. The role of STING in cancer has not yet been established; however, both actions, as an oncogene or tumor suppressor, have been documented in other types of cancer. Therefore, we performed a systematic review (registered in PROSPERO database #CRD42023407512) to discuss the role of STING pathway in the advancement of pathogenesis and/or prognosis for different myeloid neoplasms. In brief, scientific evidence supports investigations that primarily use cell lines from myeloid neoplasms, such as leukemia. More high-quality research and clinical trials are needed to understand the role of the STING pathway in the pathology of hematological malignancies. Finally, the STING pathway suggests being a promising therapeutic molecular target, particularly when combined with current drug therapies.

Influence of leptin and its receptors on individuals under chronic social stress behavior.

Stress is the body's physiological reaction to a dangerous or threatening situation, leading to a state of alertness. This reaction is necessary for developing an effective adaptive response to stress and maintaining the body's homeostasis. Chronic stress, caused mainly by social stress, is what primarily affects the world's population. In the last decades, the emergence of psychological disorders in humans has become more frequent, and one of the symptoms that can be observed is aggressiveness. In the brain, stress can cause neuronal circuit alterations related to the action of hormones in the central nervous system. Leptin, for example, is a hormone capable of acting in brain regions and neuronal circuits important for behavioral and emotional regulation. This study investigated the correlation between chronic social stress, neuroendocrine disorders, and individual behavioral changes. Then, leptin and its receptors' anatomical distribution were evaluated in the brains of mice subjected to a protocol of chronic social stress. The model of spontaneous aggression (MSA) is based on grouping young mice and posterior regrouping of the same animals as adults. According to the regrouping social stress, we categorized the mice into i) harmonic, ii) attacked, and iii) aggressive animals. For leptin hormone evaluation, we quantified plasma and brain concentrations by ELISA and evaluated its receptor and isoform expression by western blotting. Moreover, we verified whether stress or changes in leptin levels interfered with the animal's body weight. Only attacked animals showed reduced plasma leptin concentration and weight gain, besides a higher expression of the high-molecular-weight leptin receptor in the amygdala and the low-molecular-weight receptor in the hippocampal region. Aggressive animals showed a reduction in the cerebral concentration of leptin in the hippocampus and a reduced high-and low-molecular-weight leptin receptor expression in the amygdala. The harmonic animals showed a reduction in the cerebral concentration of leptin in the pituitary and a reduced expression of the high-molecular-weight leptin receptor in the amygdala. We then suggest that leptin and its receptors' expression in plasma and specific brain areas are involved in how individuals react in stressful situations, such as regrouping stress in MSA.

Fatigue behavior of multilayer ceramic structures in traditional and reverse layering designs.

PURPOSE: This study evaluated the fatigue failure load (FFL) and the number of cycles for fatigue failure (CFF) of traditional (porcelain layer up) and reversed (zirconia layer up) designs of porcelain-veneered zirconia samples prepared with heat-pressing or file-splitting techniques. MATERIALS AND METHODS: Zirconia discs were prepared and veneered with heat-pressed or machined feldspathic ceramic. The bilayer discs were bonded onto a dentin-analog according to the bilayer technique and sample design: traditional heat-pressing (T-HP), reversed heat-pressing (R-HP), traditional file-splitting with fusion ceramic (T-FC), reversed file-splitting with fusion ceramic R-FC), traditional file-splitting with resin cement (T-RC), and reversed file-splitting with resin cement (R-RC). The fatigue tests were performed using the stepwise approach at 20 Hz, 10,000 cycles/step, step-size of 200 N starting at 600 N, and proceeding until failure detection or up to 2600 N if enduring. The failure modes (from radial and/or cone cracks) were analyzed in a stereomicroscope. RESULTS: The reversed design decreased the FFL and CFF of bilayers prepared with heat-pressing and file-splitting with fusion ceramic. The T-HP and T-FC reached the highest results, which were statistically similar between them. The bilayers prepared by the file-splitting with resin cement (T-RC and R-RC) were similar to the R-FC and R-HP groups regarding FFL and CFF. Almost all reverse layering samples failed by radial cracks. CONCLUSIONS: The reverse layering design did not improve the fatigue behavior of porcelain veneered zirconia samples. The three bilayer techniques behaved similarly when used in the reversed design.

Boron-containing coating yields enhanced antimicrobial and mechanical effects on translucent zirconia.

OBJECTIVES: To evaluate the mechanical and antimicrobial properties of boron-containing coating on translucent zirconia (5Y-PSZ). METHODS: 5Y-PSZ discs (Control) were coated with a glaze (Glaze), silver- (AgCoat), or boron-containing (BCoat) glasses. The coatings' antimicrobial potential was characterized using S. mutans biofilms after 48 h via viable colony-forming units (CFU), metabolic activity (CV) assays, and quantification of extracellular polysaccharide matrix (EPS). Biofilm architectures were imaged under scanning electron and confocal laser scanning microscopies (SEM and CLSM). The cytocompatibility was determined at 24 h via WST-1 and LIVE&DEAD assays using periodontal ligament stem cells (PDLSCs). The coatings' effects on properties were characterized by Vickers hardness, biaxial bending tests, and fractography analysis. Statistical analyses were performed via one-way ANOVA, Tukey's tests, Weibull analysis, and Pearson's correlation analysis. RESULTS: BCoat significantly decreased biofilm formation, having the lowest CFU and metabolic activity compared with the other groups. BCoat and AgCoat presented the lowest EPS, followed by Glaze and Control. SEM and CLSM images revealed that the biofilms on BCoat were thin and sparse, with lower biovolume. In contrast, the other groups yielded robust biofilms with higher biovolume. The cytocompatibility was similar in all groups. BCoat, AgCoat, and Glaze also presented similar hardness and were significantly lower than Control. BCoat had the highest flexural strength, characteristic strength and Weibull parameters (σF: 625 MPa; σ0: 620 MPa; m = 11.5), followed by AgCoat (σF: 464 MPa; σ0: 478 MPa; m = 5.3). SIGNIFICANCE: BCoat is a cytocompatible coating with promising antimicrobial properties that can improve the mechanical properties and reliability of 5Y-PSZ.

Promoting Bird Functional Diversity on Landscapes with a Matrix of Planted Eucalyptus spp. in the Atlantic Forest.

Promoting the diversity of biological communities in areas of agricultural production is a very current debate since protected areas may not be sufficient to ensure biodiversity conservation. Among the biological communities affected by the production areas are birds, which show rapid responses to changes in the landscape. Here we seek to understand how landscape planning, concerning its composition and configuration, in areas with a matrix of planted Eucalyptus spp. forests influences the functional diversity of bird assemblages in the Atlantic Forest. Our results show that the spatial distribution design of planted forests in terms of age, land cover and clone types have effects on bird diversity with regard to functional divergence, functional evenness and species richness. These results reinforce the importance of good management for the maintenance of bird diversity. We found that bird functional diversity in planted forest matrices increased with the proximity index, proportion of native vegetation and age importance value, and is negatively influenced by edge density and proportion of forest plantation. For bird conservation, it is thus better to associate Eucalyptus spp. with other cover types in the landscape. These results corroborate that, to increase bird functional diversity, it is possible to associate conservation and production in the same landscape. Mosaic landscapes have great potential to contribute to the conservation of bird biodiversity outside protected areas. However, decisions regarding the management of planted forests and planning of improved areas intended for conservation seem to be decisive to ensure the maintenance of bird biodiversity.

Borosilicate glass as a surface finishing alternative for improving the mechanical properties of third-generation zirconia.

OBJECTIVE: This study evaluated the effect of an experimental borosilicate glass on the mechanical and optical behavior of 5Y-PSZ zirconia and comparing it to commercial glaze and as-sintered. METHODS: Disc-shaped specimens of a 5Y-PSZ (Zpex Smile) were prepared and sintered (1550 °C, 2 h). The zirconia discs were randomly divided according to the surface treatment: as-sintered (C), commercial glaze (G), and experimental borosilicate glass (SL). Glaze and experimental glass powders were mixed with building liquids and applied to zirconia with a brush. G specimens were fired at 950 °C and SL at 1200 °C. An extended dwell time of 20 min was applied to both groups. Biaxial flexural strength, roughness (Ra and Rz), translucency (TP00), color alteration (ΔE00), Vickers hardness, fracture toughness, residual stresses, and x-ray diffraction analyses were conducted. Statistical analyses were performed with Weibull statistics, Kruskal-Wallis, or ANOVA tests (α = 5%). RESULTS: SL yielded the highest flexural strength (799.35 MPa), followed by G (662.34 MPa), and C (485.38 MPa). The fracture origin of SL specimens was in the bulk zirconia, while G and C showed fractures starting at the surface. As-sintered reached the highest fracture toughness and hardness. Glaze and borosilicate glass provided surface compressive stresses. Borosilicate glass application led to phase transformation (t→m). SL and G showed the lowest roughness. TP00 and ΔE00 were similar among groups. SIGNIFICANCE: Borosilicate glass improved strength without harming the optical properties of third-generation zirconia. Toughness and roughness provided by the experimental glass were similar to those from commercial glaze.

Preheated Composite as an Alternative for Bonding Feldspathic and Hybrid Ceramics: A Microshear Bond Strength Study.

PURPOSE: To evaluate the bond strength between alternative or conventional luting agents and indirect restorative materials. MATERIALS AND METHODS: Blocks of a polymer-infiltrated ceramic network (PICN, Vita Enamic) and a feldspathic ceramic (FEL, Vita Mark II) were sliced and divided according to the luting agent: resin cement (PICN-RC, FEL-RC), flowable composite (PICN-FC, FEL-FC), or preheated composite (PICN-PH, FEL-PH). The ceramic surfaces were polished, etched with 5% hydrofluoric acid for 60 s, and then a silane layer was applied. Cylinders of the luting agents were built up on the ceramic surfaces. In half the samples, the microshear bond strength (µSBS) was tested after 24 h (baseline). The other half was tested after 5000 thermocycles (5°C-55°C) (aging). The failure modes were determined using a stereomicroscope, and the ceramic surfaces were analyzed using a scanning electron microscope. Data were statistically analyzed with two-way ANOVA. RESULTS: Thermocycling reduced the bond strength values of all experimental groups. Regarding FEL, the preheated composite obtained the highest results. Resin cement showed results similar to the flowable composite at baseline and after aging. The highest results of PICN were obtained from the preheated composite followed by resin cement and flowable composite. Significant differences among the three luting agents were observed before and after aging. The most frequent failures among the experimental groups were adhesive and cohesive in the ceramic. CONCLUSION: Bond strength results indicate that the preheated composite can be an alternative for adhesive cementation when applied on the tested feldspathic ceramic or PICN.

Herd and animal level prevalences and risk factors for Neospora caninum infection in cattle in the state of Paraíba, northeastern Brazil.

Bovine neosporosis is a globally important disease, causing abortions and significant economic losses. In Brazil, studies on neosporosis in cattle are few and based on limited samples and/or from limited areas. We aimed to determine the herd and animal levels seroprevalence and associated factors for Neospora caninum infections in cattle from the state of Paraíba, Northeastern Brazil, using a planned sampling. Herds (n = 434) and cows aged ≥24 months (n = 1891) were randomly selected, and serum samples were tested with the immunofluorescence antibody test (IFAT) using as cut-off point the antibody titer 200. Herd-level and animal-level seroprevalences were 17.8% (95% CI = 14.3%-21.8%) and 18.1% (95% CI = 14.7%-22.1%), respectively. The factors associated with N. caninum infection were farm located in the Sertão mesoregion (Prevalence ratio [PR] = 2.37), mixed production (PR = 1.64), herd size of 34-111 animals (PR = 3.50) and herd size >111 animals (PR = 6.14). The results indicate high N. caninum circulation in the bovine population of the state of Paraíba, semiarid of Brazil, mainly in the Sertão mesoregion, where the highest apparent herd and animal-level prevalences of positive herds were identified. Control strategies should be adopted to mitigate the impact of disease on cattle production, as well as it's suggested the encouragement of conducting surveys in wildlife from Caatinga biome, mainly canids, to provide information on the importance of these animals on the epidemiology of bovine neosporosis.

Occurrence of Apicomplexa protozoa in wild birds in the Northeast region of Brazil.

Protozoa of the Apicomplexa phylum are worldwide distributed with capacity to infect endothermic animals. The study of these protozoa in wild birds in Brazil is scarce. This study aimed to evaluate the occurrence of apicomplexan protozoa in wild birds in the Northeast of Brazil. From October to December 2019, brain tissue samples were collected from 71 captive birds from the Wild Animal Screening Center of the Pernambuco State (CETRAS-Tangara) and 25 free-living birds from the Caatinga biome in Rio Grande do Norte, totaling 96 animals (41 species). Brain fragments were subjected to molecular diagnosis by nested PCR for the 18s rDNA gene of Apicomplexa parasites, followed by DNA sequencing. This gene was detected in 25% (24/96) of the samples, and it was possible to perform DNA sequencing of 14 samples, confirming three genera: Isospora, Sarcocystis and Toxoplasma from eight bird species (Amazona aestiva, Coereba flaveola, Egretta thula, Paroaria dominicana, Sporophila nigricollis, Cariama cristata, Columbina talpacoti, Crypturellus parvirostris). The occurrence these coccidia in wild birds provides important epidemiological information for the adoption of preventive measures for its conservation. Future studies are needed to better understand the consequence of Apicomplexa infection in birds in Caatinga and Atlantic Forest biomes.

Occurrence of extended-spectrum ß-lactamase-producing Enterobacteriaceae in raw milk from cows with subclinical mastitis in northeast Brazil.

Extended-spectrum ß-lactamase (ESBL)-producing Gram negative bacteria are becoming increasingly important in veterinary and human medicine because they can hydrolyze the third generation ß-lactams, penicillins, and monobactams. The aim of this study was to identify ESBL-producing Enterobacteriaceae in raw cow milk samples from northeast Brazil. Twenty-six bacterial isolates belonging to the Enterobacteriaceae family were obtained from milk samples from 257 cows with subclinical mastitis. Using microbiological tests, 53.85% (14/26) were identified as Escherichia coli, 15.38% (4/26) as Proteus mirabilis, 26.92% (7/26) as Klebsiella spp., and 3.85% (1/26) as Citrobacter spp. Of all the isolates, 61.54% (16/26) were positive in the ESBL screening test, of which 12.5% (2/16) were positive in the double-disc synergy test using three types of cephalosporins and amoxicillin/clavulanic acid. The two isolates were identified as Klebsiella spp. Among all the isolates, 53.85% (14/26) were positive for one or both ESBL-encoding genes, blaSHV and blaTEM; among these, 71.43% (10/14) were identified as E. coli. This study demonstrates that ESBL-producing bacteria can be found in raw cow milk from northeast Brazil. Cows with subclinical mastitis should be recognized as reservoirs of these strains, which can propagate to humans.

Endocrown restorations in premolars: influence of remaining axial walls of tooth structure and restorative materials on fatigue resistance.

OBJECTIVES: To evaluate the effect of the remaining tooth structure and different CAD/CAM materials on the fatigue performance and failure mode of endodontically treated premolars restored with endocrowns. MATERIALS AND METHODS: Ninety maxillary premolars were endodontically treated and assigned into 6 groups (n = 15) according to the number of remaining axial walls (four, three, and two) and restorative materials (ultra-translucent zirconia 5Y-PSZ [KATANA UTML] and lithium disilicate [IPS e.max-CAD]). The specimens were subjected to cyclic fatigue loading test (initial load 200 N; 20 Hz). An incremental step load of 100 N per 10,000 cycles was applied until failure. The fatigue failure load (FFL) and number of failure cycles (CFFs) data were statistically analyzed with two-way ANOVA and Kaplan-Meier test (α = 0.05). Failed specimens were examined under a stereomicroscope 25 × and failure modes were determined. RESULTS: FFL and CFF were significantly influenced by restorative material (p < 0.05). 5Y-PSZ endocrowns showed significantly higher FFL when compared with lithium disilicate. The number of remaining walls did not affect the fatigue behavior or failure mode of the specimens. Of the lithium disilicate restorations, 51% had repairable failures, while 95% 5Y-PSZ restorations had non-repairable failures. CONCLUSIONS: Zirconia endocrowns showed better FFL than lithium disilicate endocrowns, regardless of the number of remaining axis walls. Lithium disilicate and 5Y-PSZ endocrowns showed FFL higher than the normal masticatory loads. CLINICAL RELEVANCE: Restoring endodontically treated premolars with endocrown could be a promising treatment, regardless of the remaining axial walls. However, precaution should be taken in material selection since it affects the fatigue resistance and failure mode.

High-Translucency Zirconia Following Chemical Vapor Deposition with SiH4: Evidence of Surface Modifications and Improved Bonding.

PURPOSE: To evaluate the effect of plasma-enhanced chemical vapor deposition (PECVD) with silicon hydride (SiH4) at different times on HT-zirconia surface characteristics and bonding of composite cement before and after thermocycling. MATERIALS AND METHODS: Blocks of HT zirconia were obtained, polished, sintered and divided into five groups, according to PECVD time (n = 31): Zr-30 (30 s), Zr-60 (60 s), Zr-120 (120 s) and Zr-300 (300 s). The control group (Zr-0) did not receive PECVD. X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), energy dispersive spectroscopy (EDS) in conjunction with field-emission scanning electron microscopy (FE-SEM), x-ray photoelectron spectroscopy (XPS), goniometry, and profilometry tests were used for chemical and topographic characterization. Monobond N silane (Ivoclar Vivadent) was applied to the surface, and a cylinder of composite cement (Variolink N) was made (3 x 3 mm). Half of the specimens of each group were stored for 24 h or subjected to thermocycling (6 x 103 cycles). A shear bond strength (SBS) test was performed. Results were subjected to one-way ANOVA and Tukey's tests (α = 0.05). RESULTS: For experimental groups, XPS showed that formation of Si-O bonds contributed to increased surface free energy (SFE). FE-SEM and EDS showed that the longer the deposition time, the greater the amount of silicon on the surface. Zr-60 and Zr-300 presented higher and lower surface roughnesses, respectively. The silicon penetrated the microstructure, causing higher stress concentrations. The bond strength to composite cement was improved after all PECVD deposition times. CONCLUSION: The PECVD technique with SiH4, associated with chemical treatment with primer based on silane methacrylate, is a solely chemical surface treatment capable of maintaining bonding between composite cement and HT zirconia.

Effect of resin cement elastic modulus on the biaxial flexural strength and structural reliability of an ultra-thin lithium disilicate glass-ceramic material.

OBJECTIVES: Photo- and dual-polymerized resin-based luting agent was evaluated for elastic moduli effects on ultra-thin lithium disilicate (LD) glass-ceramic strengthening, structural reliability, and stress distribution. MATERIALS AND METHODS: One hundred-sixty LD discs (IPS e.max CAD, Ivoclar/Vivadent) were produced in ultra-thin thicknesses (half with 0.3 mm and the other half with 0.5 mm). The ultra-thin ceramic disks were coated with two different cement types (Variolink Veneer - V and Panavia F 2.0 - P). Two positive control groups were tested following hydrofluoric (HF) acid etching (LDt3, LDt5) and two negative control groups were tested for untreated ceramic (LD 3, LD 5). Biaxial flexural strength (BFS), characteristic strength (σ0) and Weibull modulus (m) were the response variables (n = 20) at the ceramic/resin cement interface (z = 0). Finite element analysis (FEA) was used to calculate maximum principal stress. Data were analyzed using two-way ANOVA, and Tukey's test. Scanning electron microscopy (SEM) was used to analyze the failed specimens using fractography and surface morphology. RESULTS: The BFS of LD at either thickness was not affected by cement types, as also demonstrated by FEA. Structural reliability significantly improved in the positive control group (LDt5). CONCLUSION: The cementation of ultra-thin LD with a resin-cement of varying elastic moduli did not influence BFS. LD surface modification by HF acid-etching increased the reliability. CLINICAL RELEVANCE: Ultra-thin anterior veneer designs made from lithium disilicate have been widely proposed and the apparent success of LD ultra-thin veneers was not influenced by the cement choice in the current studies albeit the elastic moduli luting agents used were of similar values.

Effect of Resin Cement at Different Thicknesses on the Fatigue Shear Bond Strength to Leucite Ceramic.

OBJECTIVES: This in vitro study was performed to evaluate fatigue survival by shear test in the union of leucite-reinforced feldspathic ceramic using different cement thicknesses. MATERIALS AND METHODS: Leucite-reinforced glass ceramics blocks were sectioned in 2-mm thick slices where resin cylinders were cemented. The samples were distributed in two experimental groups (n = 20) according to the cement thickness (60 and 300 µm). The specimens of each group were submitted to the stepwise fatigue test in the mechanical cycling machine under shear stress state, with a frequency of 2 Hz, a step-size of 0.16 bar, starting with a load of 31 N (1.0 bar) and a lifetime of 20,000 cycles at each load step. RESULTS: The samples were analyzed in a stereomicroscope and scanning electron microscopy to determine the failure type. There is no significant difference between the mean values of shear bond strength according to both groups. Log-rank (p = 0.925) and Wilcoxon (p = 0.520) tests revealed a similar survival probability in both cement layer thicknesses according to the confidence interval (95%). The fracture analysis showed that the mixed failure was the most common failure type in the 300-µm thickness group (80%), while adhesive failure was predominant in the 60-µm thickness group (67%). The different cement thicknesses did not influence the leucite ceramic bonding in fatigue shear testing; however, the thicker cement layer increased the predominance of the ceramic material failure. CONCLUSION: The resin cement thicknesses bonded to leucite ceramic did not influence the long-term interfacial shear bond strength, although thicker cement layer increased the ceramic material cohesive failure. Regardless the cement layer thickness, the shear bond strength lifetime decreases under fatigue.

Infecção por Varicela-Zóster em paciente imunossupresso com complicações graves e inesperado desfecho clínico favorável / Varicella Zoster virus infection in immunosuppressed patient with serious complications and unexpected favorable clinical outcome / Infección por Varicela Zóster en paciente inmunosuprimido con complicaciones graves y evolución clínica favorable inesperada

O vírus varicela-zóster pode recorrer diante de imunodeficiência. A falta de imunidade celular pode ser tão grave a ponto de comprometer o sistema nervoso central. Neste caso, o paciente apresentou quadro de aids com meningoencefalopatia por vasculite. Pela alta suspeição diagnóstica, foi iniciado tratamento, empírica e precocemente, com aciclovir, corticoide e anticonvulsivante endovenosos. O diagnóstico se deu posteriormente. Com base neste caso, foi proposta uma estratégia eficaz de atendimento.

Varicella zoster virus infection may recur in the face of immunodeficiency, which can be so severe as to compromise the central nervous system. In the case studied, the patient presented a clinical picture of AIDS along with vasculitis meningoencephalopathy. Due to high diagnostic suspicion, intravenous Acyclovir, Corticosteroid and Intravenous Anticonvulsant were administered early. Diagnosis occurred later. On this case, an effective care strategy was proposed.

El virus de la varicela zóster puede reaparecer ante una inmunodeficiencia. La falta de inmunidad celular puede ser tan grave como para comprometer el sistema nervioso central. En este caso, el paciente desarrolló SIDA junto con meningoencefalopatía por vasculitis. Debido a la alta sospecha diagnóstica, se inició de forma empírica y precoz Aciclovir, corticoides y anticonvulsivantes intravenosos. Después, se realizó el diagnóstico. A partir de este caso se planteó una estrategia de atención eficaz.

Detection of Anti-Neospora caninum IgG in Blood Serum and Colostrum Samples in Naturally Infected Sheep and in Their Newborn Offspring.

The aim was to detect correlations of IgG antibodies against N. caninum in serum and colostrum samples from ewes, through the IFAT, and to evaluate the presence of this immunoglobulin in the serum of newborn lambs after colostrum ingestion. Blood samples from 162 ewes that did not show any disease in the general physical examination and from their newborn lambs, not more than five days postpartum, along with 162 colostrum samples and 182 blood samples from the neonates, were analyzed. In total, 27.8% (45/162) of the mothers were positive for anti-N. caninum IgG, among which antibodies were detected in the colostrum in 46.7% (21/45). All the ewes with positive colostrum had reactive offspring. The kappa agreement for the correlation between the serological tests on the ewes and the colostrum results was 0.558. This correlation increased as the antibody titers of the mothers increased, and reached 1.000 from the titer of 1:400 from the mothers. Comparison of the antibody detection results between the offspring's serum and colostrum showed a kappa agreement of 1.000. In conclusion, there was a good agreement regarding the detection of anti-N. caninum IgG between the colostrum samples and the lambs' serum; the use of colostrum forms a noninvasive alternative for diagnosing N. caninum in sheep herds.

Silica infiltration on translucent zirconia restorations: Effects on the antagonist wear and survivability.

OBJECTIVE: To assess potential antagonist wear and survival probability of silica-infiltrated zirconia compared to glass-graded, glazed, and polished zirconia. METHODS: Table top restorations made of 3Y-TZP (3Y), 5Y-PSZ (5Y), and lithium disilicate (LD) were bonded onto epoxy resin preparations. Each zirconia was divided into five groups according to the surface treatment: polishing; glaze; polishing-glaze; glass infiltration; and silica infiltration. The LD restorations received a glaze layer. Specimens were subjected to sliding fatigue wear using a steatite antagonist (1.25 ×106 cycles, 200 N). The presence of cracks, fractures, and/or debonding was checked every one/third of the total number of cycles was completed. Roughness, microstructural, Scanning electron microscopy, wear and residual stress analyses were conducted. Kaplan-Meier, Mantel-Cox (log-rank) and ANOVA tests were performed for statistical analyses. RESULTS: The survival probability was different among the groups. Silica infiltration and polishing-glaze led to lower volume loss than glaze and glass-infiltration. Difference was observed for roughness among the zirconia and surface treatment, while lithium disilicate presented similar roughness compared to both glazed zirconia. Scanning electron microscopy revealed the removal of the surface treatment after sliding fatigue wear in all groups. Compressive stress was detected on 3Y surfaces, while tensile stress was observed on 5Y. SIGNIFICANCE: 3Y and 5Y zirconia behaved similarly regarding antagonist wear, presenting higher antagonist wear than the glass ceramic. Silica-infiltrated and polished-glazed zirconia produced lower antagonist volume loss than glazed and glass-infiltrated zirconia. Silica-infiltrated 3Y and lithium disilicate restorations were the only groups to show survival probabilities lower than 85%.

Determinants of COVID-19 Vaccine Acceptance among Dental Professionals: A Multi-Country Survey.

PURPOSE: This study sought to investigate the acceptance rate and associated factors of COVID-19 vaccines among dentists and dental students in seven countries. MATERIAL AND METHODS: A structured questionnaire prepared and guided by the report of the SAGE Working Group on Vaccine Hesitancy was distributed among groups of dentists and dental students in seven countries across four continents. RESULTS: A total of 1527 subjects (850 dentists and 677 dental students) participated in this survey. Although 72.5% of the respondents reported their intention to accept COVID-19 vaccines (dentists: 74.4%, dental students: 70.2%), there was a significant difference in agreement between dentists/dental students across countries; generally, respondents in upper-middle-, and high-income countries (UM-HICs) showed significantly higher acceptance rates compared to those in low- and lower-middle income countries (L-LMICs). Potential predictors of higher vaccine acceptance included being a dentist, being free of comorbidity, being well-informed about COVID-19 vaccines, having better knowledge about COVID-19 complications, having anxiety about COVID-19 infection, having no concerns about the side effects of the produced vaccines and being a resident of an UM-HIC. CONCLUSION: The results of our survey indicate a relatively good acceptance rate of COVID-19 among the surveyed dentists and dental students. However, dentists and dental students in L-LMICs showed significantly lower vaccine acceptance rates and trust in COVID-19 vaccines compared to their counterparts in UM-HICs. Our results provide important information to policymakers, highlighting the need for implementation of country-specific vaccine promotion strategies, with special focus on L-LMICs.

Detection of Toxoplasma gondii oocysts in soil and risk mapping in an island environment in the Northeast of Brazil.

Toxoplasmosis is an emerging and re-emerging infectious disease that can be transmitted through a contaminated environment. Environmental contamination is an emergency health issue, and determining its occurrence is fundamental to a One Health approach. In this study, we addressed the extent of environmental contamination and viability of Toxoplasma gondii oocysts in soil in different environments on Fernando de Noronha Island, Brazil. In addition, we performed species distribution modelling to predict the environmental suitability for coccidia persistence in the studied area. Soil samples were collected in 14 neighbourhoods of the Island and in the four main squares, creating a total of 95 soil samples (five samples per site). The samples were analyzed by the polymerase chain reaction (PCR) technique for the presence of the 18S ribosomal DNA gene of Apicomplexan protozoa, followed by genetic sequencing. We obtained 4.2% (4/95) positive soil samples with 100% similarity for T. gondii sequences. Two out of four positive sites on PCR showed viability of T. gondii oocysts through the mouse bioassay technique. As a result of the application of the species distribution modelling, environmental adequacy for the coccidia was observed throughout the Island. The results confirm the contamination of the soil in this insular environment by T. gondii oocysts and the environmental suitability by modelling application. These findings are an alert for the possibility of infection in animals and humans by contaminated soil, and for contamination of the maritime environment in addition to water resources for consumption by the local population.