Real-time detection of neonatal seizures improves with on demand EEG interpretation.

OBJECTIVE: Under- and overtreatment of seizures may result in adverse outcomes; thus, early, reliable seizure identification is crucial. Continuous conventional ElectroEncephaloGram (cEEG) is the gold standard, but amplitude integrated EEG (aEEG) is most widely-used in the Neonatal Intensive Care Unit (NICU). We aimed to determine whether a novel pathway combining cEEG and aEEG for seizure detection would improve real-time seizure identification. METHODS: A single-center, prospective quality improvement project cohort. Patients at-risk of seizures were monitored by cEEG and aEEG concurrently, with the option for the neonatologist to contact a neurologist for real-time cEEG interpretation. The primary outcome was correct identification of seizures by the new combined pathway compared to aEEG alone. RESULTS: Seizure detection using aEEG had a sensitivity of 46.2%; specificity of 93.3%; PPV of 66.7%; and NPV of 85.7%. Utilizing the new on-demand, real-time cEEG interpretation by a neurologist, correct seizure identification increased by 27% (95%CI: 10-56%). Over-diagnosis of seizures was avoided in 33.3% (95% CI: 12.1-64.6%) and misuse of anti-seizure medication was prevented. CONCLUSIONS: Combining aEEG with on-demand cEEG interpretation improved accurate seizure detection in a high-risk NICU population, with the potential to avoid over-treatment. SIGNIFICANCE: We describe a novel combined EEG monitoring pathway to improve seizure detection, and prevent unnecessary treatment.

Vibrational spectroscopic imaging for the evaluation of matrix and mineral chemistry.

Metabolic bone diseases manifesting fragility fractures (such as osteoporosis) are routinely diagnosed based on bone mineral density (BMD) measurements, and the effect of various therapies also evaluated based on the same outcome. Although useful, it is well recognized that this metric does not fully account for either fracture incidence or the effect of various therapies on fracture incidence, thus, the emergence of bone quality as a contributing factor in the determination of bone strength. Infrared and Raman vibrational spectroscopic techniques are particularly well-suited for the determination of bone quality as they provide quantitative and qualitative information of the mineral and organic matrix bone components, simultaneously. Through the use of microspectroscopic techniques, this information is available in a spatially resolved manner, thus, the outcomes may be easily correlated with outcomes from techniques such as histology, histomorphometry, and nanoindentation, linking metabolic status with material properties.

Imaging the distribution of sodium dodecyl sulfate in skin by confocal Raman and infrared microspectroscopy.

PURPOSE: To image SDS distribution across different skin regions, to compare the permeability difference between porcine and human skin, and to evaluate the interaction between SDS and skin. METHODS: Full thickness porcine and human skin was treated with acyl chain perdeuterated SDS (SDS-d(25)) at room temperature and at 34 °C for 3, 24 and 40 h. SDS distribution in skin was monitored by confocal Raman and IR microspectroscopic imaging. Permeation profiles of SDS-d(25) in skin were derived from the band intensities of the CD(2) stretching vibrations. The interaction between SDS and skin was monitored through the CH(2) and CD(2) stretching frequencies and the Amide I and II spectral region. RESULTS: SDS-d(25) penetrates both porcine and human skin in a time and temperature-dependent manner, with slightly higher permeability through the stratum corneum (SC) in porcine skin. When SDS permeates into the SC, its chains are more ordered compared to SDS micelles. The secondary structure of keratin in the SC is not affected by SDS-d(25). CONCLUSION: The spatial distribution of SDS-d(25) in skin was obtained for the first time. Infrared microscopic imaging provides unique opportunities to measure concentration profiles of exogenous materials in skin and offers insights to interaction between permeants and skin.

Infrared spectroscopic studies of sodium dodecyl sulphate permeation and interaction with stratum corneum lipids in skin.

The barrier function of skin is primarily provided by the lamellar lipid matrix of the stratum corneum (SC), which has been shown in previous infrared (IR) and related studies to consist predominantly of ordered lipids packed in orthorhombic and hexagonal domains. In the current work, we investigate the effects of the anionic surfactant, sodium dodecyl sulphate (SDS), on SC lipid packing and phase behaviour, using FT-IR spectroscopy. The use of acyl chain perdeuterated SDS allows unequivocal spectroscopic detection of both endogenous lipid and exogenous material in intact tissue. IR spectra were acquired as a function of temperature from isolated human SC exposed to SDS for various incubation periods at 34°C. SDS is found to enter the SC and is observed to be in a more ordered state in the SC than in solution, indicating that the SDS interacts with the ordered SC lipids. The results reveal that SDS reduces the amount of orthorhombic phase in the SC and increases the amount of hexagonally packed lipid at physiologically relevant temperatures. In addition, a small decrease in the lipid T(m) (acyl chain melting temperature) is observed. Furthermore, these SDS-induced changes were found to be strongly dependent on the time of exposure.

Maturational changes in dentin mineral properties.

In this study the changes in properties of the maturing mantle and circumpulpal dentin were quantitatively analyzed. Sections from six fetal bovine undecalcified incisors were used. Regions of mantle and circumpulpal dentin of sequential maturation stages were identified on spectroscopic images acquired by Fourier Transform Infrared Imaging. Spectroscopic parameters corresponding to mineral properties at these stages were analyzed and reported as a function of distance from the cervix of the incisor, the latter representing tissue age. Mineral parameters were correlated with distance from the cervix. Values of these parameters in mantle and circumpulpal dentin were compared. A multi-phasic pattern of changes was found for all the parameters examined, with most of the alterations occurring in the initial maturation period. The patterns of temporal variation in mantle and circumpulpal dentin mineral properties show distinct developmental stages and were not identical for the two dentin compartments. The study showed that mineral maturation in dentin is not a linear process and that mantle dentin is developmentally distinct from circumpulpal dentin, presenting at certain stages different physicochemical events during the maturation of the tissue.

Studies of the minimum hydrophobicity of alpha-helical peptides required to maintain a stable transmembrane association with phospholipid bilayer membranes.

The effects of the hydrophobicity and the distribution of hydrophobic residues on the surfaces of some designed alpha-helical transmembrane peptides (acetyl-K2-L(m)-A(n)-K2-amide, where m + n = 24) on their solution behavior and interactions with phospholipids were examined. We find that although these peptides exhibit strong alpha-helix forming propensities in water, membrane-mimetic media, and lipid model membranes, the stability of the helices decreases as the Leu content decreases. Also, their binding to reversed phase high-performance liquid chromatography columns is largely determined by their hydrophobicity and generally decreases with decreases in the Leu/Ala ratio. However, the retention of these peptides by such columns is also affected by the distribution of hydrophobic residues on their helical surfaces, being further enhanced when peptide helical hydrophobic moments are increased by clustering hydrophobic residues on one side of the helix. This clustering of hydrophobic residues also increases peptide propensity for self-aggregation in aqueous media and enhances partitioning of the peptide into lipid bilayer membranes. We also find that the peptides LA3LA2 [acetyl-K2-(LAAALAA)3LAA-K2-amide] and particularly LA6 [acetyl-K2-(LAAAAAA)3LAA-K2-amide] associate less strongly with and perturb the thermotropic phase behavior of phosphatidylcholine bilayers much less than peptides with higher L/A ratios. These results are consistent with free energies calculated for the partitioning of these peptides between water and phospholipid bilayers, which suggest that LA3LA2 has an equal tendency to partition into water and into the hydrophobic core of phospholipid model membranes, whereas LA6 should strongly prefer the aqueous phase. We conclude that for alpha-helical peptides of this type, Leu/Ala ratios of greater than 7/17 are required for stable transmembrane associations with phospholipid bilayers.

Optimal methods for processing mineralized tissues for Fourier transform infrared microspectroscopy.

Fourier transform infrared microspectroscopy (FTIRM) and infrared imaging (FTIRI) are techniques utilized in the analysis of bone mineral and matrix properties in health and disease. Since the spatial arrangement of bone tissue is conserved using FTIRM and FTIRI, quantitative data can be obtained on bone mineral (hydroxyapatite) crystalline size and composition, and on matrix structure and composition at discrete anatomic locations with a spatial resolution from approximately 7 mm (FTIRI) to 10 mm (FTIRM). To section bone for FTIRM and FTIRI, it must be preserved ("fixed") to maintain its properties, and embedded in a hard supportive material. Since most of the embedding media have components that spectrally overlap the components of mineralized tissues, it is critical to define optimal embedding and fixation protocols that have the least effect on mineral and matrix spectra. In the current study, the spectra of mouse calvaria in seven different fixatives and six different commonly used embedding media were assessed by FTIRM and FTIRI. The fixatives evaluated were absolute ethanol, 70% ethanol, glycerol, formaldehyde, EM fixative, and formalin in cacodylate or phosphate-buffered saline. The embedding media tested were Araldite, Epon, JB-4, LR White, PMMA, and Spurr. Comparisons were made to FTIR spectra obtained from unprocessed ground calvaria and to spectra of cryosections of unfixed tissue, fast-frozen in polyvinyl alcohol (5% PVA). Non-aqueous fixatives and embedding in LR White, Spurr, Araldite, and PMMA had the least effect on the spectral parameters measured (mineral to matrix ratio, mineral crystallinity, and collagen maturity) compared with cryo-sectioned calvaria and non-fixed, non-embedded calvaria in KBr pellets.

Effects of transforming growth factor-beta deficiency on bone development: a Fourier transform-infrared imaging analysis.

Transforming growth factor-beta 1 (TGF-beta1) is a cytokine member of the TGF-beta superfamily involved in the control of proliferation and differentiation of various cell types. TGF-beta1 plays an important role in bone formation and resorption. To determine the effect of TGF-beta1 deficiency on bone mineral and matrix, tibias from mice in which TGF-beta1 expression had been ablated (TGF-beta1 null) were analyzed and compared with background- and age-matched wild-type (WT) control animals by Fourier transform-infrared imaging (FTIRI) and histochemistry. FTIRI allows the characterization of nondemineralized thin tissue sections at the ultrastructural level with a spatial resolution of approximately 7 microm. The spectroscopic parameters calculated were: mineral-to-matrix ratio (previously shown to correspond to ash weight); mineral crystallinity (related to the crystallographically determined crystallite size and perfection in the apatite c-axis direction); and collagen maturity (related to the ratio of pyridinoline:deH-DHLNL collagen cross-links). Several fields were selected to represent different stages of bone development within the same specimen from the secondary ossification center to the distal diaphysis. Anatomically equivalent areas were compared as a function of age and genotype. The spectroscopic results were expressed both as color-coded images and as pixel population distributions for each of the three parameters monitored. Based on comparisons of histochemistry and FTIRI, there were distinctive age and genotype variations. At all ages examined, in the TGF-beta1 null mice growth plates, alkaline phosphatase (ALP) activity and collagen maturity were reduced, but no effect on mineral content or crystallinity was noted. In the TGF-beta1 null mice metaphyses, there was a persistence of trabeculae, but no significant alterations in mineral content or crystallinity. In contrast, mineral content, mineral crystallinity, and collagen maturity were reduced in the secondary ossification center and cortical bone of the TGF-beta1 null mice. These results, consistent with a mechanism of impaired bone maturation in the TGF-beta1 null mice, may be directly related to TGF-beta1 deficiency and indirectly to increased expression of inflammatory cytokines in the TGFbeta1 null mice.

Thermal stability and DPPC/Ca2+ interactions of pulmonary surfactant SP-A from bulk-phase and monolayer IR spectroscopy.

Surfactant protein A (SP-A), the most abundant pulmonary surfactant protein, is implicated in multiple biological functions including surfactant homeostasis, biophysical activity, and host defense. SP-A forms ternary complexes with lipids and Ca2+ which are important for protein function. The current study uses infrared (IR) transmission spectroscopy to investigate the bulk-phase interaction between SP-A, 1,2-dipalmitoylphosphatidylcholine (DPPC), and Ca2+ ions along with IR reflection-absorption spectroscopy (IRRAS) to examine protein secondary structure and lipid orientational order in monolayer films in situ at the air/water interface. The amide I contour of SP-A reveals two features at 1653 and 1636 cm(-1) arising from the collagen-like domain and a broad feature at 1645 cm(-1) suggested to arise from the carbohydrate recognition domain (CRD). SP-A secondary structure is unchanged in lipid monolayers. Thermal denaturation of SP-A in the presence of either DPPC or Ca2+ ion reveals a sequence of events involving the initial melting of the collagen-like region, followed by formation of intermolecular extended forms. Interestingly, these spectral changes were inhibited in the ternary system, showing that the combined presence of both DPPC and Ca2+ confers a remarkable thermal stability upon SP-A. The ternary interaction was revealed by the enhanced intensity of the asymmetric carboxylate stretching vibration. The IRRAS measurements indicated that incorporation of SP-A into preformed DPPC monolayers at a surface pressure of 10 mN/m induced a decrease in the average acyl chain tilt angle from 35 degrees to 28 degrees. In contrast, little change in chain tilt was observed at surface pressures of 25 or 40 mN/m. These results are consistent with and extend the fluorescence microscopy studies of Keough and co-workers [Ruano, M. L. F., et al. (1998) Biophys. J. 74, 1101-1109] in which SP-A was suggested to accumulate at the liquid-expanded/liquid-condensed boundary. Overall these experiments reveal the remarkable stability of SP-A in diverse, biologically relevant environments.

A polyalanine-based peptide cannot form a stable transmembrane alpha-helix in fully hydrated phospholipid bilayers.

The conformation and amide proton exchangeability of the peptide acetyl-K(2)-A(24)-K(2)-amide (A(24)) and its interaction with phosphatidylcholine bilayers were examined by a variety of physical techniques. When dissolved in or cast from methanol as a dried film, A(24) is predominantly alpha-helical. In aqueous media, however, A(24) exists primarily as a mixture of helical (though not necessarily alpha-helical) and random coiled structures, both of which allow rapid H-D exchange of all amide protons. When incorporated into phospholipids in the absence of water, A(24) also exists primarily as a transmembrane alpha-helix. However, upon hydration of that system, rapid exchange of all amide protons also occurs along with a marked change in the amide I absorption band of the peptide. Also, when dispersed with phosphatidylcholine in aqueous media, the conformation and thermal stability of A(24) are not significantly altered by the presence of the phospholipid or by its gel/liquid-crystalline phase transition. Differential scanning calorimetric and electron spin resonance spectroscopic studies indicate that A(24) has relatively minor effects on the thermodynamic properties of the lipid hydrocarbon chain-melting phase transition, that it does not abolish the lipid pretransition, and that its presence has no significant effect on the orientational order or rates of motion of the phospholipid hydrocarbon chains. We therefore conclude that A(24) has sufficient alpha-helical propensity, but insufficient hydrophobicity, to maintain a stable transmembrane association with phospholipid bilayers in the presence of water. Instead, it exists primarily as a dynamic mixture of helices and other conformers and resides mostly in the aqueous phase where it interacts weakly with the bilayer surface or with the polar/apolar interfacial region of phosphatidylcholine bilayers. Thus, polyalanine-based peptides are not good models for the transmembrane alpha-helical segments of natural membrane proteins.

Spectroscopic characterization of collagen cross-links in bone.

Collagen is the most abundant protein of the organic matrix in mineralizing tissues. One of its most critical properties is its cross-linking pattern. The intermolecular cross-linking provides the fibrillar matrices with mechanical properties such as tensile strength and viscoelasticity. In this study, Fourier transform infrared (FTIR) spectroscopy and FTIR imaging (FTIRI) analyses were performed in a series of biochemically characterized samples including purified collagen cross-linked peptides, demineralized bovine bone collagen from animals of different ages, collagen from vitamin B6-deficient chick homogenized bone and their age- and sex-matched controls, and histologically stained thin sections from normal human iliac crest biopsy specimens. One region of the FTIR spectrum of particular interest (the amide I spectral region) was resolved into its underlying components. Of these components, the relative percent area ratio of two subbands at approximately 1660 cm(-1) and approximately 1690 cm(-1) was related to collagen cross-links that are abundant in mineralized tissues (i.e., pyridinoline [Pyr] and dehydrodihydroxylysinonorleucine [deH-DHLNL]). This study shows that it is feasible to monitor Pyr and DHLNL collagen cross-links spatial distribution in mineralized tissues. The spectroscopic parameter established in this study may be used in FTIRI analyses, thus enabling the calculation of relative Pyr/DHLNL amounts in thin (approximately 5 microm) calcified tissue sections with a spatial resolution of approximately 7 microm.

In situ analysis of mineral content and crystallinity in bone using infrared micro-spectroscopy of the nu(4) PO(4)(3-) vibration.

Measurements of bone mineral content and composition in situ provide insight into the chemistry of bone mineral deposition. Infrared (IR) micro-spectroscopy is well suited for this purpose. To date, IR microscopic (including imaging) analyses of bone apatite have centered on the nu(1),nu(3) PO(4)(3-) contour. The nu(4) PO(4)(3-) contour (500-650 cm(-1)), which has been extensively used to monitor the crystallinity of hydroxyapatite in homogenized bone samples, falls in a frequency region below the cutoff of the mercury-cadmium-telluride detectors used in commercial IR microscopes, thereby rendering this vibration inaccessible for imaging studies. The current study reports the first IR micro-spectroscopy spectra of human iliac crest cross sections in the nu(4) PO(4)(3-) spectral regions, obtained with a synchrotron radiation source and a Cu-doped Ge detector coupled to an IR microscope. The acid phosphate (HPO(4)(2-)) content and mineral crystallite perfection (crystallinity) of a human osteon were mapped. To develop spectra-structure correlations, a combination of X-ray powder diffraction data and conventional Fourier transform IR spectra have been obtained from a series of synthetic hydroxyapatite crystals and natural bone powders of various species and ages. X-ray powder diffraction data demonstrate that there is an increase in average crystal size as bone matures, which correlates with an increase in the nu(4) PO(4)(3-) FTIR absorption peak ratio of two peaks (603/563 cm(-1)) within the nu(4) PO(4)(3-) contour. Additionally, the IR results reveal that a band near 540 cm(-1) may be assigned to acid phosphate. This band is present at high concentrations in new bone, and decreases as bone matures. Correlation of the nu(4) PO(4)(3-) contour with the nu(2) CO (3)(2-) contour also reveals that when acid phosphate content is high, type A carbonate content (i.e., carbonate occupying OH(-) sites in the hydroxyapatite lattice) is high. As crystallinity increases and acid phosphate content decreases, carbonate substitution shifts toward occupation of PO(4)(3-) sites in the hydroxyapatite lattice. Thus, IR microscopic analysis of the nu(4) PO(4)(3-) contour provides a straightforward index of both relative mineral crystallinity and acid phosphate concentration that can be applied to in situ IR micro-spectroscopic analysis of bone samples, which are of interest for understanding the chemical mechanisms of bone deposition in normal and pathological states.

Effect of cholesterol on miscibility and phase behavior in binary mixtures with synthetic ceramide 2 and octadecanoic acid. Infrared studies.

The three main lipid components of the stratum corneum, namely ceramides, free fatty acids and cholesterol, play a fundamental role in the maintenance of the skin barrier. The current investigation is aimed toward understanding the miscibility and intermolecular interactions of these lipids. Toward this end, Fourier transform infrared spectroscopic studies of the three possible equimolar binary mixtures of cholesterol, a synthetic non-hydroxylated fatty acid N-acyl sphingosine with a C18 chain length (N-stearoylsphingosine, approximating human ceramide 2), and stearic acid were undertaken. The thermotropic responses of the methylene stretching and scissoring vibrations were used to evaluate chain conformation and packing respectively. Selective perdeuteration, of either the stearic acid or the ceramide acid chains, permitted separate and simultaneous evaluation of the conformational order and packing properties of the sphingosine chain, the amide linked fatty acid chains and/or the stearic acid chain. Whereas cholesterol mixed well with ceramide at physiological temperatures, the stearic acid was miscible with the cholesterol only at relatively high temperatures where the fatty acid is disordered. A complex interaction between stearic acid and ceramide was detected. A separate fatty acid-rich phase persisted until at least 50 degrees C, whereas at higher temperatures the components appear to be quite miscible. However, a preferential association of the fatty acid with the ceramide base chain is indicated. None of the binary systems studied exhibit miscibility and interactions resembling those in the ternary mixtures of these substances, which is widely used to model stratum corneum. The role of cholesterol in controlling the miscibility characteristics in the ternary system is evident.

Infrared microscopic imaging of bone: spatial distribution of CO3(2-).

This article describes a novel technology for quantitative determination of the spatial distribution of CO3(2-) substitution in bone mineral using infrared (IR) imaging at approximately 6 microm spatial resolution. This novel technology consists of an IR array detector of 64 x 64 elements mapped to a 400 microm x 400 microm spot at the focal plane of an IR microscope. During each scan, a complete IR spectrum is acquired from each element in the array. The variation of any IR parameter across the array may be mapped. In the current study, a linear relationship was observed between the band area or the peak height ratio of the CO3(2-) v3 contour at 1415 cm(-1) to the PO4(3-) v1,v3 contour in a series of synthetic carbonated apatites. The correlation coefficient between the spectroscopically and analytically determined ratios (R2 = 0.989) attests to the practical utility of this IR area ratio for determination of bone CO3(2-) levels. The relationship forms the basis for the determination of CO3(2-) in tissue sections using IR imaging. In four images of trabecular bone the average CO3(2-) levels were 5.95 wt% (2298 data points), 6.67% (2040 data points), 6.66% (1176 data points), and 6.73% (2256 data points) with an overall average of 6.38+/-0.14% (7770 data points). The highest levels of CO3(2-) were found at the edge of the trabeculae and immediately adjacent to the Haversian canal. Examination of parameters derived from the phosphate v1,v3 contour of the synthetic apatites revealed that the crystallinity/perfection of the hydroxyapatite (HA) crystals was diminished as CO3(2-) levels increased. The methodology described will permit evaluation of the spatial distribution of CO3(2-) levels in diseased and normal mineralized tissues.

Deletion of the helical motif in the intestinal fatty acid-binding protein reduces its interactions with membrane monolayers: Brewster angle microscopy, IR reflection-absorption spectroscopy, and surface pressure studies.

Intestinal fatty acid binding protein (IFABP) appears to interact directly with membranes during fatty acid transfer [Hsu, K. T., and Storch, J. (1996) J. Biol. Chem. 271, 13317-13323]. The largely alpha-helical "portal" domain of IFABP was critical for these protein--membrane interactions. In the present studies, the binding of IFABP and a helixless variant of IFABP (IFABP-HL) to acidic monolayers of 1,2-dimyristoylphosphatidic acid (DMPA) has been monitored by surface pressure measurements, Brewster angle microscopy (BAM), and infrared reflection-absorption spectroscopy (IRRAS). Protein adsorption to DMPA exhibited a two phase kinetic process consisting of an initial slow phase, arising from protein binding to the monolayer and/or direct interfacial adsorption, and a more rapid phase that parallels formation of lipid-containing domains. IFABP exhibited more rapid changes in both phases than IFABP-HL. The second phase was absent when IFABP interacted with zwitterionic monolayers of 1,2-dipalmitoylphosphatidylcholine, revealing the important role of electrostatics at this stage. BAM images of DMPA monolayers with either protein revealed the formation of domains leading eventually to rigid films. Domains of DMPA/IFABP-HL formed more slowly and were less rigid than with the wild-type protein. Overall, the IRRAS studies revealed a protein-induced conformational ordering of the lipid acyl chains with a substantially stronger ordering effect induced by IFABP. The physical measurements thus suggested differing degrees of direct interaction between the proteins and DMPA monolayers with the IFABP/DMPA interaction being somewhat stronger. These data provide a molecular structure rationale for previous kinetic measurements indicating that the helical domain is essential for a collision-based mechanism of fatty acid transfer to phospholipid membranes [Corsico, B., Cistola, D. P., Frieden, C. and Storch, J. (1998) Proc. Natl. Acad. Sci. U.S.A. 95, 12174-12178].

Secondary structure in lung surfactant SP-B peptides: IR and CD studies of bulk and monolayer phases.

Pulmonary surfactant protein SP-B is known to facilitate adsorption and spreading of surfactant components across the air/water interface. This property appears essential for in vivo function in the alveolar subphase and at the air/alveolar surface. Three peptides with amino acid sequences based on SP-B containing predicted alpha-helical regions (SP-B(1--20), SP-B(9--36A), SP-B(40--60A)) have been synthesized to probe structure-function relationships and protein-lipid interaction in bulk phase and monolayer environments. IR and CD studies are reported along with traditional surface pressure-molecular area (pi-A) isotherms and IR reflection-absorption spectroscopy (IRRAS) investigations conducted at the air/water interface. In bulk phase, helix-promoting environments (methanol and aqueous dispersions of lipid vesicles), SP-B(1--20) and SP-B(9--36A) contained significant amounts of alpha-helical structure, whereas varying degrees of alpha-helix, random coil, and beta-sheet were observed in aqueous solutions and monolayers. The most striking behavior was observed for SP-B(9--36A), which displayed reversible surface pressure-induced beta-sheet formation. Bulk phase lipid melting curves and monolayer experiments with peptide-lipid mixtures showed subtle differences in the degree of bulk phase interaction and substantial differences in peptide surface activity. The uniqueness of IRRAS is emphasized as the importance of evaluating secondary structure in both bulk phase and monolayer environments for lung surfactant peptide mimics is demonstrated.

FTIR microscopic imaging of collagen and proteoglycan in bovine cartilage.

Articular cartilage, a connective tissue that provides resistance to compressive forces during joint movements, has not been examined in detail by conventional Fourier transform infrared (FTIR) spectroscopy, microspectroscopy (FTIRM), or imaging (FTIRI). The current study reports FTIRM and FTIRI analyses of normal bovine cartilage and identifies the specific molecular components of cartilage that contribute to its IR spectrum. FTIRM data acquired through the superficial, middle, and deep zones of thin sections of bovine articular cartilage showed a variation in intensities of the absorbance bands that arise from the primary nonaqueous components of cartilage, collagen, and proteoglycan (primarily aggrecan) and thus reflected the differences in quantity of these specific components. The spectra of mixtures of model compounds, which had varying proportions of type II collagen and aggrecan, were analyzed to identify spectral markers that could be used to quantitatively analyze these components in cartilage. Collagen and aggrecan were then imaged by FTIRI based on markers found in the model compounds. Polarization experiments were also performed to determine the spatial distribution of the collagen orientation in the different zones of cartilage. This study provides a framework in which complex pathological changes in this heterogeneous tissue can be assessed by IR microscopic imaging.

Fourier transform infrared spectroscopy and differential scanning calorimetry studies of fatty acid homogeneous ceramide 2.

Ceramides provide a major component of the barrier function of skin. An understanding of barrier organization requires a detailed characterization of ceramide phase behavior and molecular interactions. Toward this end, Fourier transform infrared (FTIR) and differential scanning calorimetry (DSC) studies of ceramide 2 analogues (non-hydroxylated fatty acid N-acyl sphingosines) of specific chain lengths (C(14), C(16), C(18), C(20)) are presented. In addition, the molecular interactions of the individual chains in each molecule are elucidated through thermotropic FTIR studies of derivatives possessing perdeuterated fatty acid chains. DSC data showed a much smaller chain length variation (for the C(16), C(18), C(20) derivatives) in the main order-disorder transition temperature (approx. 93+/-1 degrees C) than is observed in the corresponding series of phosphatidylcholines, consistent with minimal ceramide hydration. The temperature dependence of the methylene stretching and scissoring modes revealed a solid-solid phase transition at 20-25 degrees C below the main order-disorder transition accompanied by chain packing alterations from orthorhombic-->hexagonal subcells. The chain packing transition was accompanied by enhanced penetration of water into the polar region. This was deduced from the temperature dependence of the amide I and II modes, which provide direct evidence for H-->D exchange. The CD(2) scissoring mode splitting of the deuterated fatty acid constituent of the C(16), C(18), C(20) chains revealed preferential segregation of microdomains (3-5 chains) of this species within the orthorhombic phase. In contrast, the sphingosine base chains appeared to be sufficiently separated so as to inhibit interchain vibrational coupling between them. FTIR spectroscopy provides a convenient means for characterizing domain formation, chain packing, and hydration sites of these phases, which are highly ordered under physiological conditions.