A neutral mononuclear rhenium(I) complex with a rare in situ-generated triazolyl ligand for the luminescence "turn-on" detection of histidine.

A rare in situ-generated mononuclear rhenium complex [Re(bpt)(CO)3(NH3)] (1, bpt = 3,5-bis(2-pyridyl)-1,2,4-triazolate) can be used as a "turn-on" luminescent probe for selectively sensing L-histidine against other amino acids. Compound 1 was prepared by reacting Re2(CO)10, 2-cyanopyridine and hydrazine with an in situ formed bpt ligand through cyclization via C-N and N-N couplings with its single-side chelating mode arrayed with respect to the Re center. Compound 1 was highly stable and showed a green light MLCT emission in DMF solution at 507 nm upon excitation at 360 nm. Interestingly, the emission from 1 could be quenched by the addition of metal ions such as Ni2+ and Cu2+ but the emission efficiently recovered with the introduction of histidine. However, histidine could only be selectively detected when a combination of compound 1 and Ni2+ was used. Therefore, the luminescence response of the Ni2+-modified compound 1 could be utilized as a "turn-on" probe for the selective detection of histidine. This work provides a simple method for developing new sensing platforms of a discrete metal complex based on rare in situ generation.

Recent Advances in Bimetallic Cu-Based Nanocrystals for Electrocatalytic CO2 Conversion.

An elevated level of anthropogenic CO2 has been the major cause of global warming, and significant efforts are being made around the world towards the development of CO2 capture, storage and reuse technologies. Among various CO2 conversion technologies, electrochemical CO2 reduction (CO2 RR) by nanocrystals is one of the most promising strategies as it is facile, quick, and can be integrated with other renewable energy techniques. Judiciously designed catalytic nanomaterials promise to be the next generation of electrochemical electrodes that offer cutting-edge performance, low energy consumption and aid in reducing overall carbon footprint. In this minireview, we highlight the recent developments related to the bimetallic Cu-based nanocatalysts and discuss their structure-property relationships. We focus on the design principles and parameters required for the enhancement of CO2 conversion efficiency, selectivity, and stability.

Dual Stimuli-Responsive Pickering Emulsions from Novel Magnetic Hydroxyapatite Nanoparticles and Their Characterization Using a Microfluidic Platform.

Stimuli-responsive emulsifiers have emerged as a class of smart agents that can permit regulated stabilization and destabilization of emulsions, which is essential for food, cosmetic, pharmaceutical, and petroleum industries. Here, we report the synthesis of novel "smart" hydroxyapatite (HaP) magnetic nanoparticles and their corresponding stimuli-responsive Pickering emulsions and explore their movement under confined spaces using a microfluidic platform. Pickering emulsions prepared with our magnetic stearic acid-functionalized Fe2O3@HaP nanoparticles exhibited pronounced pH-responsive behavior. We observed that the diameter of emulsion droplets decreases with an increase in pH. Swift demulsification was achieved by lowering the pH, whereas the reformation of emulsions was achieved by increasing the pH; this emulsification-demulsification cycling was successful for at least ten cycles. We used a microfluidic platform to test the stability of the emulsions under flowing conditions and their response to a magnetic field. We observed that the emulsion stability was diminished and droplet coalescence was enhanced by the application of the magnetic field. The smart nanoparticles we developed and their HaP-based emulsions present promising materials for pharmaceutical and petroleum industries, where responsive emulsions with controlled stabilities are required.

Recent Advances in Functionalized Mesoporous Silica Frameworks for Efficient Desulfurization of Fuels.

Considerable health and climate benefits arising from the use of low-sulfur fuels has propelled the research on desulfurization of fossil fuels. Ideal fuels are urgently needed and are expected to be ultra-low in sulfur (10-15 ppm), with no greater than 50 ppm sulfur content. Although several sulfur removal techniques are available in refineries and petrochemical units, their high operational costs, complex operational needs, low efficiencies, and higher environmental risks render them unviable and challenging to implement. In recent years, mesoporous silica-based materials have emerged as promising desulfurizing agents, owing to their high porosity, high surface area, and easier functionalization compared to conventional materials. In this review, we report on recent progress in the synthesis and chemistry of new functionalized mesoporous silica materials aiming to lower the sulfur content of fuels. Additionally, we discuss the role of special active sites in these sorbent materials and investigate the formulations capable of encapsulating and trapping the sulfur-based molecules, which are challenging to remove due to their complexity, for example the species present in JP-8 jet fuels.

Integration of a (-Cu-S-)n plane in a metal-organic framework affords high electrical conductivity.

Designing highly conducting metal-organic frameworks (MOFs) is currently a subject of great interest for their potential applications in diverse areas encompassing energy storage and generation. Herein, a strategic design in which a metal-sulfur plane is integrated within a MOF to achieve high electrical conductivity, is successfully demonstrated. The MOF {[Cu2(6-Hmna)(6-mn)]·NH4}n (1, 6-Hmna = 6-mercaptonicotinic acid, 6-mn = 6-mercaptonicotinate), consisting of a two dimensional (-Cu-S-)n plane, is synthesized from the reaction of Cu(NO3)2, and 6,6'-dithiodinicotinic acid via the in situ cleavage of an S-S bond under hydrothermal conditions. A single crystal of the MOF is found to have a low activation energy (6 meV), small bandgap (1.34 eV) and a highest electrical conductivity (10.96 S cm-1) among MOFs for single crystal measurements. This approach provides an ideal roadmap for producing highly conductive MOFs with great potential for applications in batteries, thermoelectric, supercapacitors and related areas.

Investigation of inverse emulsion assisted controlled release of polyacrylamides for enhanced oil recovery.

Conventional polymer flooding (e.g. using polyacrylamide) has been widely used in the oil fields as an economical means for enhanced oil recovery. However, its efficacy is affected by the polymer properties and increasingly harsh reservoir conditions. In this study, a high-molecular-weight modified polyacrylamide polymer (GF-1) encapsulated in a water-in-oil emulsion is proposed for controlled polymer release towards enhanced oil recovery. It is compared with the conventional polyacrylamide in terms of their microscopic morphology, dissolving capacity, concentration-viscosity relationship, and rheological properties. It contained swollen polymer micelles and gradually released the polymer after phase inversion, which caused its viscosity, viscoelasticity, and plugging capacity to increase with aging time. The plugging analysis surprisingly showed a four-fold increase in the dimensionless breakthrough pressure of the emulsion polymer and five-fold increase in the residual resistance factor after five days of aging, confirming the significant increase in viscosity in confined spaces. The most interesting results were obtained by parallel core flooding experiments, where a higher recovery factor of 2.7% more than the conventional polymer was observed for GF-1 and GF-1 outperformed the conventional polymer by 6.9% in the low permeability zone. This emulsion polymer is a promising material to achieve enhanced oil recovery using in-depth profile modification in future oilfield related efforts.

Paddlewheel SBU based Zn MOFs: Syntheses, Structural Diversity, and CO2 Adsorption Properties.

Four Zn metal⁻organic frameworks (MOFs), {[Zn2(2,6-ndc)2(2-Pn)]·DMF}n (1), {[Zn2(cca)2(2-Pn)]·DMF}n (2), {[Zn2(thdc)2(2-Pn)]·3DMF}n (3), and {[Zn2(1,4-ndc)2(2-Pn)]·1.5DMF}n (4), were synthesized from zinc nitrate and N,N'-bis(pyridin-2-yl)benzene-1,4-diamine (2-Pn) with naphthalene-2,6-dicarboxylic acid (2,6-H2ndc), 4-carboxycinnamic acid (H2cca), 2,5-thiophenedicarboxylic acid (H2thdc), and naphthalene-1,4-dicarboxylic acid (1,4-H2ndc), respectively. MOFs 1⁻4 were all constructed from similar dinuclear paddlewheel {Zn2(COO)4} clusters and resulted in the formation of three kinds of uninodal 6-connected non-interpenetrated frameworks. MOFs 1 and 2 suit a topologic 48·67-net with 17.6% and 16.8% extra-framework voids, respectively, 3 adopts a pillared-layer open framework of 48·66·8-topology with sufficient free voids of 39.9%, and 4 features a pcu-type pillared-layer framework of 412·6³-topology with sufficient free voids of 30.9%. CO2 sorption studies exhibited typical reversible type I isotherms with CO2 uptakes of 55.1, 84.6, and 64.3 cm³ g-1 at 195 K and P/P0 =1 for the activated materials 1', 2', and 4', respectively. The coverage-dependent isosteric heat of CO2 adsorption (Qst) gave commonly decreased Qst traces with increasing CO2 uptake for all the three materials and showed an adsorption enthalpy of 32.5 kJ mol-1 for 1', 38.3 kJ mol-1 for 2', and 23.5 kJ mol-1 for 4' at zero coverage.

High-κ Samarium-Based Metal-Organic Framework for Gate Dielectric Applications.

The self-assembly of a samarium-based metal-organic framework [Sm2(bhc)(H2O)6]n (1) in good yield was achieved by reacting Sm(NO3)3·6H2O with benzenehexacarboxylic acid (bhc) in a mixture of H2O-EtOH under hydrothermal conditions. A structural analysis showed that compound 1 crystallized in a space group of Pnmn and adopted a 3D structure with (4,8) connected nets. Temperature dependent dielectric measurements showed that compound 1 behaves as a high dielectric material with a high dielectric constant (κ = 45.1) at 5 kHz and 310 K, which is comparable to the values for some of the most commonly available dielectric inorganic metal oxides such as Sm2O3, Ta2O5, HfO2, and ZrO2. In addition, electrical measurements of 1 revealed an electrical conductivity of about 2.15 × 10-7 S/cm at a frequency of 5 kHz with a low leakage current (Ileakage = 8.13 × 10-12 Amm-2). Dielectric investigations of the Sm-based MOF provide an effective path for the development of high dielectric materials in the future.

Semiconductor Metal-Organic Frameworks: Future Low-Bandgap Materials.

Metal-organic frameworks (MOFs) with low density, high porosity, and easy tunability of functionality and structural properties, represent potential candidates for use as semiconductor materials. The rapid development of the semiconductor industry and the continuous miniaturization of feature sizes of integrated circuits toward the nanometer (nm) scale require novel semiconductor materials instead of traditional materials like silicon, germanium, and gallium arsenide etc. MOFs with advantageous properties of both the inorganic and the organic components promise to serve as the next generation of semiconductor materials for the microelectronics industry with the potential to be extremely stable, cheap, and mechanically flexible. Here, a perspective of recent research is provided, regarding the semiconducting properties of MOFs, bandgap studies, and their potential in microelectronic devices.

Semiconductor Behavior of a Three-Dimensional Strontium-Based Metal-Organic Framework.

The self-assembly of a three-dimensional strontium-based metal-organic framework [Sr(Hbtc)(H2O)]n (1) was achieved through the reaction of Sr(NO3)2 with a 1,2,4-benzenetricarboxylic acid (1,2,4-H3btc) ligand under hydrothermal conditions. This Sr-based metal-organic framework exhibits remarkable semiconducting behavior, as evidenced by theoretical calculations and experimental measurements. Temperature-dependent DC conductivity, near-room-temperature AC conductivity, diffuse reflection spectra, and photoluminescence spectra provide strong proof that compound 1 shows a band gap of 2.3 eV, which is comparable to that for other commonly available semiconducting materials (e.g., CdSe, CdTe, ZnTe, GaP, etc.). The optimized molecular structure and electronic properties (density of states and band gap energy) of 1 were calculated using density functional theory, and the results are consistent with experimental findings. This is the first report on the semiconducting properties of a strontium-based MOF, which will pave the way for further studies in semiconducting MOFs with interesting potential applications in optoelectronic devices.

Structural characteristics and non-linear optical behaviour of a 2-hydroxynicotinate-containing zinc-based metal-organic framework.

Materials with non-linear optical (NLO) properties play an important role in the construction of electronic devices for optical communications, optical data processing and data storage. With this aim in mind, a Zn(II)-based metal-organic framework {[Zn2(nica)2(bpy)1.5(H2O)]×0.5(bpy)×3H2O}n (1), was synthesized using 4,4'-bipyridine (bpy) and a potentially bidentate ligand, 2-hydroxynicotinic acid (H2nica) with a salicylate binding moiety. A single-crystal X-ray diffraction analysis revealed that compound 1 crystallized in the orthorhombic space group Fdd2 and was composed of a three dimensional porous framework. Since Fdd2 belonged to a class of non-centrosymmetric space groups, we therefore investigated the non-linear optical behaviour of compound 1. Photoluminescence studies revealed that compound 1 exhibited a blue light emission with a maxima at 457 nm.

Metal-organic frameworks for electronics: emerging second order nonlinear optical and dielectric materials.

Metal-organic frameworks (MOFs) have been intensively studied over the past decade because they represent a new category of hybrid inorganic-organic materials with extensive surface areas, ultrahigh porosity, along with the extraordinary tailorability of structure, shape and dimensions. In this highlight, we summarize the current state of MOF research and report on structure-property relationships for nonlinear optical (NLO) and dielectric applications. We focus on the design principles and structural elements needed to develop potential NLO and low dielectric (low-κ) MOFs with an emphasis on enhancing material performance. In addition, we highlight experimental evidence for the design of devices for low-dielectric applications. These results motivate us to develop better low-dielectric and NLO materials and to perform in-depth studies related to deposition techniques, patterning and the mechanical performance of these materials in the future.