Novel Two-Step Process in Cellulose Depolymerization: Hematite-Mediated Photocatalysis by Lytic Polysaccharide Monooxygenase and Fenton Reaction.

To transform cellulose from biomass into fermentable sugars for biofuel production requires efficient enzymatic degradation of cellulosic feedstocks. The recently discovered family of oxidative enzymes, lytic polysaccharide monooxygenase (LPMO), has a high potential for industrial biorefinery, but its energy efficiency and scalability still have room for improvement. Hematite (α-Fe2O3) can act as a photocatalyst by providing electrons to LPMO-catalyzed reactions, is low cost, and is found abundantly on the Earth's surface. Here, we designed a composite enzymatic photocatalysis-Fenton reaction system based on nano-α-Fe2O3. The feasibility of using α-Fe2O3 nanoparticles as a composite catalyst to facilitate LPMO-catalyzed cellulose oxidative degradation in water was tested. Furthermore, a light-induced Fenton reaction was integrated to increase the liquefaction yield of cellulose. The innovative approach finalized the cellulose degradation process with a total liquefaction yield of 93%. Nevertheless, the complex chemical reactions and products involved in this system require further investigation.

Molecular Functionalization of NiO Nanocatalyst for Enhanced Water Oxidation by Electronic Structure Engineering.

Tuning the local environment of nanomaterial-based catalysts has emerged as an effective approach to optimize their oxygen evolution reaction (OER) performance, yet the controlled electronic modulation around surface active sites remains a great challenge. Herein, directed electronic modulation of NiO nanoparticles was achieved by simple surface molecular modification with small organic molecules. By adjusting the electronic properties of modifying molecules, the local electronic structure was rationally tailored and a close electronic structure-activity relationship was discovered: the increasing electron-withdrawing modification readily decreased the electron density around surface Ni sites, accelerating the reaction kinetics and improving OER activity, and vice versa. Detailed investigation by operando Raman spectroelectrochemistry revealed that the electron-withdrawing modification facilitates the charge-transfer kinetics, stimulates the catalyst reconstruction, and promotes abundant high-valent γ-NiOOH reactive species generation. The NiO-C6 F5 catalyst, with the optimized electronic environment, exhibited superior performance towards water oxidation. This work provides a well-designed and effective approach for heterogeneous catalyst fabrication under the molecular level.

Efficient BiVO4 Photoanodes by Postsynthetic Treatment: Remarkable Improvements in Photoelectrochemical Performance from Facile Borate Modification.

Water-splitting photoanodes based on semiconductor materials typically require a dopant in the structure and co-catalysts on the surface to overcome the problems of charge recombination and high catalytic barrier. Unlike these conventional strategies, a simple treatment is reported that involves soaking a sample of pristine BiVO4 in a borate buffer solution. This modifies the catalytic local environment of BiVO4 by the introduction of a borate moiety at the molecular level. The self-anchored borate plays the role of a passivator in reducing the surface charge recombination as well as that of a ligand in modifying the catalytic site to facilitate faster water oxidation. The modified BiVO4 photoanode, without typical doping or catalyst modification, achieved a photocurrent density of 3.5 mA cm-2 at 1.23 V and a cathodically shifted onset potential of 250 mV. This work provides an extremely simple method to improve the intrinsic photoelectrochemical performance of BiVO4 photoanodes.

Identifying MnVII-oxo Species during Electrochemical Water Oxidation by Manganese Oxide.

Identifying surface active intermediate species is essential to reveal the catalytic mechanism of water oxidation by metal-oxides-based catalysts and to develop more efficient catalysts for oxygen-oxygen bond formation. Here we report, through electrochemical methods and ex situ infrared spectroscopy, the identification of a MnVII = O intermediate during catalytic water oxidation by a c-disordered δ-MnOx with an onset-potential-dependent reduction peak at 0.93 V and an infrared peak at 912 cm-1. This intermediate is proved to be highly reactive and much more oxidative than permanganate ion. Therefore, we propose a new catalytic mechanism for water oxidation catalyzed by Mn oxides, with involvement of the MnVII = O intermediate in a resting state and the MnIV-O-MnVII = O as a real active species for oxygen-oxygen bond formation.

Enhancing strength and toughness of cellulose nanofibril network structures with an adhesive peptide.

The mechanical properties of cellulose nanofibrils network structure are essential for their applications in functional materials. In this work, an adhesive peptide consisting of just 11 amino acid residues with a hydrophobic core sequence of FLIVI (F - phenylalanine, L - leucine, I - isoleucine, V - valine) flanked by three lysine (K) residues was adsorbed to 2,2,6,6-Tetramethyl-1-piperidinyloxy radical (TEMPO) oxidized cellulose nanofibrils (TO-CNF). Composite films were prepared by solution casting from water suspensions of TO-CNF adsorbed with the adhesive peptide. The nanofibrils network structure of the composite was characterized by atomic force microscopy (AFM). The structure of the peptide in the composites and the interactions between TO-CNF and the peptide were studied by Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The mechanical properties of the composites were characterized by tensile tests and dynamic mechanical analysis (DMA). With 6.3wt.% adhesive peptide adsorbed onto TO-CNF, the composite showed a modulus of 12.5±1.4GPa, a tensile strength of 344.5±(15.3)MPa, and a strain to failure of 7.8±0.4%, which are 34.4%, 48.8%, and 23.8% higher than those for neat TO-CNF, respectively. This resulted in significantly improved toughness (work to fracture) for the composite, 77% higher than that for the neat TO-CNF.

Flexible and Responsive Chiral Nematic Cellulose Nanocrystal/Poly(ethylene glycol) Composite Films with Uniform and Tunable Structural Color.

The fabrication of responsive photonic structures from cellulose nanocrystals (CNCs) that can operate in the entire visible spectrum is challenging due to the requirements of precise periodic modulation of the pitch size of the self-assembled multilayer structures at the length scale within the wavelength of the visible light. The surface charge density of CNCs is an important factor in controlling the pitch size of the chiral nematic structure of the dried solid CNC films. The assembly of poly(ethylene glycol) (PEG) together with CNCs into smaller chiral nematic domains results in solid films with uniform helical structure upon slow drying. Large, flexible, and flat photonic composite films with uniform structure colors from blue to red are prepared by changing the composition of CNCs and PEG. The CNC/PEG(80/20) composite film demonstrates a reversible and smooth structural color change between green and transparent in response to an increase and decrease of relative humidity between 50% and 100% owing to the reversible swelling and dehydration of the chiral nematic structure. The composite also shows excellent mechanical and thermal properties, complementing the multifunctional property profile.

The role of heteropolysaccharides in developing oxidized cellulose nanofibrils.

A fundamental study was undertaken to determine the general role of heteropolysaccharides during the production of TEMPO-oxidized cellulose nanofibrils (TOCNs). Four major fiber resources, viz., fully bleached kraft pulps of softwood and hardwood varieties (pine, eucalyptus) and non-woods (bamboo, bagasse) were used because of their substantial morphological differences and relative abundance. The effect of heteropolysaccharides during TEMPO-mediated oxidation and high-pressure homogenization for TOCNs production was investigated under constant conditions. Most galactoglucomannans were removed during oxidation, whereas the majority of xylans were retained. The galactoglucomannans, however, non-beneficially consumed NaClO, the terminal TEMPO oxidant, while xylans adversely affected carboxylate group formation by limiting chemical accessibility to cellulose. However, lower xylans content led to more transparent and processable suspensions, while during mechanical processing, heteropolysaccharides supported nanofibrillation. The average length of the final TOCNs from eucalyptus, bamboo, bagasse, and pine were 290, 350, 360 and 370nm, respectively, with average widths of ∼4nm.