Lactose-6-phosphate as an alternative to disodium phosphate in the production of processed cheese food.

Processed cheese food (PCF) is a dairy product prepared by blending dairy ingredients with nondairy ingredients and heating the blend with agitation to produce a homogeneous product with an extended shelf life. Emulsifying salts (ES), such as disodium phosphate (DSP) and trisodium citrate, have a critical effect on the emulsification characteristics of casein by sequestering the calcium from the calcium-paracaseinate phosphate complex in natural cheese. Lactose-6-phosphate (LP) is an organic compound produced from lactose that has the potential to function as ES. Lactose-6-phosphate is not approved for use as a substitute for ES in the large-scale production of PC. The objective of this study was to produce PCF with LP instead of DSP. Lactose-6-phosphate was prepared by mixing 1 mol of α-lactose with 0.5 mol of sodium cyclo-triphosphate. The pH of recombined solutions was adjusted using sodium hydroxide to get a pH of 12 to obtain 60.74% LP. The solution was stirred for 3 d at room temperature and then concentrated to 52% total solids (TS). The ingredients in the PCF formulations were Cheddar cheese, butter, water, milk permeate powder, and LP (at a ratio of 2.0, 2.4, 2.8, 3.2, 4.0, 5.0, and 6.0%) were formulated to contain 17.0% protein, 25.0% fat, 44.0% moisture, and 2.0% salt. Processed cheese food made with 2.0% DSP was also produced as a control. The PCF was prepared by mixing all ingredients in a Kitchen Aid stand mixer to make a homogeneous paste. A 25-g sample of the mixture was cooked in the rapid visco analyzer (Perten RVA 4500, Macquarie Park, Australia) for 3 min at 95°C at 1,000 rpm for the first 2 min and 160 rpm for the last minute. The PCF was then transferred into molds and refrigerated till further analyses. The PCF was analyzed for moisture, pH, end apparent cooked viscosity, hardness, melted diameter, and melting temperature. The experiment was repeated 3 times using different batches of LP. The moisture of PCF ranged from 42.3% to 44.0% with a pH of 5.6 to 5.8. The end apparent cooked viscosity increased from 818.0 to 2,060.0 cP as the level of LP raised from 0.63% to 1.90%, whereas it was 660.0 cP in control. The hardness of PCF made with LP elevated from 61.9 to 110.1g as the level of LP increased; however, it was 85.6 g in control. The melted diameter decreased from 43 mm in control to 29 mm in 1.90% LP, while the melting temperature of PCF increased from 37.7°C in control to 59.0°C in 1.90% LP. We conclude that LP can be used as a substitute for DSP in PCF manufacture and has more capacity than DSP.

Characteristics of imitation Mozzarella cheese manufactured without emulsifying salts using a combination of culture-based acid curd and micellar casein concentrate.

The objectives of this study were to develop a process to produce acid curd from micellar casein concentrate (MCC) using starter cultures and to manufacture imitation Mozzarella cheese (IMC) using a combination of acid curd and MCC that would confer emulsification ability to the caseins without the use of emulsifying salts (ES). The formulations were targeted to produce IMC with 49.0% moisture, 20.0% fat, 18.0% protein, and 1.5% salt. In the IMC formulation made without ES (FR-2:1), the acid curd was blended with MCC so that the formula contained a 2:1 ratio of protein from acid curd relative to MCC. IMC with ES was also produced as a control. The melt and stretch characteristics of IMC made from FR-2:1 were similar to those of control IMC. We conclude that IMC can be made without ES using a 2:1 ratio of protein from acid curd relative to MCC.

Manufacture of a novel cultured micellar casein concentrate ingredient for emulsifying salt-free process cheese products applications.

Micellar casein concentrate (MCC) is a high protein ingredient that is typically produced using 3 stages of microfiltration with a 3× concentration factor and diafiltration. Acid curd is an acid protein concentrate, which can be obtained by precipitating the casein at pH 4.6 (isoelectric point) using starter cultures or direct acids without the use of rennet. Process cheese product (PCP) is a dairy food prepared by blending dairy ingredients with nondairy ingredients and then heating the mixture to get a product with an extended shelf-life. Emulsifying salts are critical for the desired functional characteristics of PCP because of their role in calcium sequestration and pH adjustment. The objectives of this study were to develop a process to produce a novel cultured micellar casein concentrate ingredient (cMCC; culture-based acid curd) and to produce PCP without emulsifying salts using different combinations of protein from cMCC and MCC in the formulations (2.0:1.0, 1.9:1.1, and 1.8:1.2). Skim milk was pasteurized at 76°C for 16 s and then microfiltered in 3 microfiltration stages using graded permeability ceramic membranes to produce liquid MCC (11.15% total protein; TPr and 14.06% total solids; TS). Part of the liquid MCC was spray dried to produce MCC powder (75.77% TPr and 97.84% TS). The rest of the MCC was used to produce cMCC (86.9% TPr and 96.4% TS). Three PCP treatments were formulated with different ratios of cMCC:MCC, including 2.0:1.0, 1.9:1.1, and 1.8:1.2 on the protein basis. The composition of PCP was targeted to 19.0% protein, 45.0% moisture, 30.0% fat, and 2.4% salt. This trial was repeated 3 times using different batches of cMCC and MCC powders. All PCP were evaluated for their final functional properties. No significant differences were detected in the composition of PCP made with different ratios of cMCC and MCC except for the pH. The pH was expected to increase slightly with elevating the MCC amount in the PCP formulations. The end apparent viscosity was significantly higher in 2.0:1.0 formulation (4,305 cP) compared with 1.9:1.1 (2,408 cP) and 1.8:1.2 (2,499 cP). The hardness ranged from 407 to 512 g with no significant differences within the formulations. However, the melting temperature showed significant differences with 2.0:1.0 having the highest melting temperature (54.0°C), whereas 1.9:1.1 and 1.8:1.2 showed 43.0 and 42.0°C melting temperature, respectively. The melting diameter (38.8 to 43.9 mm) and melt area (1,183.9 to 1,538.6 mm2) did not show any differences in different PCP formulations. The PCP made with a 2.0:1.0 ratio of protein from cMCC and MCC showed better functional properties compared with other formulations.

Manufacture of process cheese products without emulsifying salts using acid curd and micellar casein concentrate.

Process cheese products (PCP) are dairy foods prepared by blending dairy ingredients (such as natural cheese, protein concentrates, butter, nonfat dry milk, whey powder, and permeate) with nondairy ingredients [such as sodium chloride, water, emulsifying salts (ES), color, and flavors] and then heating the mixture to obtain a homogeneous product with an extended shelf life. The ES, such as sodium citrate and disodium phosphate, are critical for the unique microstructure and functional properties of PCP because they improve the emulsification characteristics of casein by displacing the calcium phosphate complexes that are present in the insoluble calcium-paracaseinate-phosphate network in natural cheese. The objectives of this study were to determine the optimum protein content (3, 6, and 9% protein) in micellar casein concentrate (MCC) to produce acid curd and to manufacture PCP using a combination of acid curd cheese and MCC that would provide the desired improvement in the emulsification capacity of caseins without the use of ES. To produce acid curd, MCC was acidified using lactic acid to get a pH of 4.6. In the experimental formulation, the acid curd was blended with MCC to have a 2:1 ratio of protein from acid curd relative to MCC. The PCP was manufactured by blending all ingredients in a KitchenAid blender (Professional 5 Plus, KitchenAid) to produce a homogeneous paste. A 25-g sample of the paste was cooked in the rapid visco analyzer (RVA) for 3 min at 95°C at 1,000 rpm stirring speed during the first 2 min and 160 rpm for the last min. The cooked PCP was then transferred into molds and refrigerated until further analysis. This trial was repeated 3 times using different batches of acid curd. MCC with 9% protein resulted in acid curd with more adjusted yield. The end apparent viscosity (402.0-483.0 cP), hardness (354.0-384.0 g), melting temperature (48.0-51.0°C), and melting diameter (30.0-31.4 mm) of PCP made from different acid curds were slightly different from the characteristics of typical PCP produced with conventional ingredients and ES (576.6 cP end apparent viscosity, 119.0 g hardness, 59.8°C melting temperature, and 41.2 mm melting diameter) due to the differences in pH of final PCP (5.8 in ES PCP compared with 5.4 in no ES PCP). We concluded that acid curd can be produced from MCC with different protein content. Also, we found that PCP can be made with no ES when the formulation uses a 2:1 ratio of acid curd relative to MCC (on a protein basis).

Calcium-Reduced Micellar Casein Concentrate-Physicochemical Properties of Powders and Functional Properties of the Dispersions.

This study aimed to examine the physicochemical properties of 30% calcium (Ca)-reduced micellar casein 80% protein powders (RC-MCC) and the functional properties of the resultant dispersions. The calcium reduction in the micellar casein (MCC) powder was achieved by subjecting the liquid micellular casein obtained from the microfiltration of pasteurized skim milk to carbon dioxide (CO2) treatment before and during ultrafiltration. The CO2 injection was controlled to obtain a 0 and 30% reduction in calcium in the C-MCC (control) and RC-MCC powders, respectively. The MCC powders were tested for physicochemical properties such as chemical composition, particle size distribution, and bulk density. The MCC powders were reconstituted in deionized water to test the functional properties of the dispersions, i.e., solubility, viscosity, heat stability, emulsifying capacity, emulsion stability, foam capacity, and foam stability. The CO2 injection did not result in any significant differences in the composition except mineral contents, particularly calcium. The particle size and bulk density of RC-MCC powders were significantly (p < 0.05) lower than control powders. The RC-MCC powder dispersions showed increased heat stability compared to control, whereas no significant changes in viscosity and emulsification capacity were observed between the two dispersions. However, the emulsion stability and foam stability of RC-MCC dispersions were significantly lower than C-MCC dispersions. This study showed that by utilizing a novel microfiltration−CO2 injection−ultrafiltration process, 30% calcium-reduced MCC powder was commercially feasible. This research also provides a detailed understanding of the effect of calcium reduction on the functional properties of resultant MCC dispersions. It showed that calcium reduction could improve the solubility of the powders and heat stability and foam capacity of the dispersions.

Effect of midday pasteurizer washing on thermoduric organisms and their progression through Cheddar cheese manufacturing and ripening.

Thermoduric bacteria are known to affect the quality of Cheddar cheese, with manifested defects including slits, weak body, and blowing. Thermoduric bacteria are likely to increase in numbers during cheese-making, as in-process conditions are conducive to proliferation. The present study was conducted to track thermoduric bacterial progression during an 18- to 20-h Cheddar cheese production run and during ripening when the pasteurizer was washed at midway through the production day. This study also correlated a broad range of chemical changes to the growth of thermoduric bacteria during ripening. Three independent cheese trials were performed at 3.5- ± 0.5-mo intervals. Samples were drawn in duplicates at 4 different times of the day: at the start of the run (vat 1), prior to a midday wash of the pasteurizer (vat 20), after the midday wash of the pasteurizer (vat 21), and at the end of the run (vat 42) for raw milk, pasteurized milk, and cheese. Cheeses were also tested during ripening for 6 mo. Results showed that raw milk total bacterial counts comprised 0.24% thermoduric mesophiles (TM) and 0.12% thermoduric thermophiles (TT). The thermoduric thermophilic bacterial counts increased by log10 1.23 during the pasteurizer run of 9 to 10 h, indicating a buildup of thermoduric thermophilic bacteria during the pasteurization process itself. Midday washing reduced thermophilic counts by log10 1.36, as evident by pre- and post-midday wash counts. However, a thermophilic buildup during post-midday wash was again noticed near the end of the 20-h run. We found that TT bacteria decreased in the first 60 d of ripening, whereas TM bacteria increased during the same period. However, TT bacteria increased later during 60 to 180 d of ripening. Bacillus licheniformis was the most frequently isolated bacteria in this study and was recovered at all production stages sampled during the cheese-making and ripening. We observed a significant increase in the level of orotic and uric acids in the vat made at the end of the day. No significant difference in the overall chemical composition, proteolysis, sugar, or other organic acids was observed in cheese made at the start versus the end of the production run.

Production and storage stability of concentrated micellar casein.

Concentrated micellar casein (CMC) is a high-protein ingredient that can be used in process cheese product formulations. The objectives of this study were to develop a process to produce CMC and to evaluate the effect of sodium chloride and sodium citrate on its storage stability. Skim milk was pasteurized at 76°C for 16 s and cooled to ≤4°C. The skim milk was heated to 50°C using a plate heat exchanger and microfiltered with a graded permeability (GP) ceramic microfiltration (MF) membrane system (0.1 µm) in a continuous feed-and-bleed mode (flux of 71.43 L/m2 per hour) using a 3× concentration factor (CF) to produce a 3× MF retentate. Subsequently, the retentate of the first stage was diluted 2× with soft water (2 kg of water: 1 kg of retentate) and again MF at 50°C using a 3× CF. The retentate of the second stage was then cooled to 4°C and stored overnight. The following day, the retentate was heated to 63°C and MF in a recirculation mode until the total solids (TS) reached approximately 22% (wt/wt). Subsequently, the MF system temperature was increased to 74°C and MF until the permeate flux was <3 L/m2 per hour. The CMC was then divided into 3 aliquots (approximately 10 kg each) at 74°C. The first portion was a control, whereas 1% of sodium chloride was added to the second portion (T1), and 1% of sodium chloride plus 1% of sodium citrate were added to the third portion (T2). The CMC retentates were transferred hot to sterilized vials and stored at 4°C. This trial was repeated 3 times using separate lots of skim milk. The CMC at d 0 (immediately after manufacturing) contained 25.41% TS, 21.65% true protein (TP), 0.09% nonprotein nitrogen (NPN), and 0.55% noncasein nitrogen (NCN). Mean total aerobic bacterial counts (TBC) in control, T1, and T2 at d 0 were 2.6, 2.5, and 2.8 log cfu/mL, respectively. The level of proteolysis (NCN and NPN values) increased with increasing TBC during 60 d of storage at 4°C. This study determined that CMC with >25% TS and >95% casein as percentage of TP can be manufactured using GP MF ceramic membranes and could be stored up to 60 d at 4°C. The effects of the small increase in NCN and NPN, as well as the addition of sodium chloride or sodium citrate in CMC during 60 d of storage on process cheese characteristics, will be evaluated in subsequent studies.

Optimization of Spiral-Wound Microfiltration Process Parameters for the Production of Micellar Casein Concentrate.

A systematic selection of different transmembrane pressures (TMP) and levels of diafiltration (DF) was studied to optimize these critical process parameters during the manufacturing of micellar casein concentrate (MCC) using spiral-wound polymeric membrane filtration. Three TMPs (34.5, 62.1, and 103.4 kPa) and four DF levels (0, 70, 100, and 150%) were applied in the study. The effect of the TMP and DF level on flux rates, serum protein (SP) removal, the casein-to-total-protein ratio, the casein-to-true-protein ratio, and the rejection of casein and SP were evaluated. At all transmembrane pressures, the overall flux increased with increases in the DF level. The impact of DF on the overall flux was more pronounced at lower pressures than at higher pressures. With controlled DF, the instantaneous flux was maintained within 80% of the initial flux for the entire process run. The combination of 34.5 kPa and a DF level of 150% resulted in 81.45% SP removal, and a casein-to-true-protein ratio of 0.96. SP removal data from the lab-scale experiments were fitted into a mathematical model using DF levels and the square of TMPs as factors. The model developed in this study could predict SP removal within 90-95% of actual SP removal achieved from the pilot plant experiments.

Progress in micellar casein concentrate: Production and applications.

Micellar casein concentrate (MCC) is a novel ingredient with high casein content. Over the past decade, MCC has emerged as one of the most promising dairy ingredients having applications in beverages, yogurt, cheese, and process cheese products. Industrially, MCC is manufactured by microfiltration (MF) of skim milk and is commercially available as a liquid, concentrated, or dried containing ≥9, ≥22, and ≥80% total protein, respectively. As an ingredient, MCC not only imparts a bland flavor but also offers unique functionalities such as foaming, emulsifying, wetting, dispersibility, heat stability, and water-binding ability. The high protein content of MCC represents a valuable source of fortification in a number of food formulations. For the last 20 years, MCC is utilized in many applications due to the unique physiochemical and functional characteristics. It also has promising applications to eliminate the cost of drying by producing concentrated MCC. This work aims at providing a succinct overview of the historical progress of the MCC, a review on the manufacturing methods, a discussion of MCC properties, varieties, and applications.

Compositional and Functional Characteristics of Feta-Type Cheese Made from Micellar Casein Concentrate.

Micellar casein concentrate (MCC) is a high protein ingredient (obtained by microfiltration of skim milk) with an elevated level of casein as a percentage of total protein (TP) compared to skim milk. It can be used as an ingredient in cheese making. Feta-type cheese is a brined soft cheese with a salty taste and acid flavor. We theorize that Feta-type cheese can be produced from MCC instead of milk, which can improve the efficiency of manufacture and allow for the removal of whey proteins before manufacturing Feta-type cheese. The objectives of this study were to develop a process of producing Feta-type cheese from MCC and to determine the optimum protein content in MCC to make Feta-type cheese. MCC solutions with 3% (MCC-3), 6% (MCC-6), and 9% (MCC-9) protein were prepared and standardized by mixing water, MCC powder, milk permeate, and cream to produce a solution with 14.7% total solids (TS) and 3.3% fat. Thermophilic cultures were added at a rate of 0.4% to MCC solutions and incubated at 35 °C for 3 h to get a pH of 6.1. Subsequently, calcium chloride and rennet were added to set the curd in 20 min at 35 °C. The curd was then cut into cubes, drained for 20 h followed by brining in 23% sodium chloride solutions for 24 h. Compositional analysis of MCC solutions and cheese was carried out. The yield, color, textural, and rheological measurements of Feta-type cheese were evaluated. Feta-type cheese was also made from whole milk as a control. This experiment was repeated three times. The yield and adjusted yield of Feta-type cheese increased from 19.0 to 54.8 and 21.4 to 56.5, respectively, with increasing the protein content in MCC from 3% to 9%. However, increasing the protein content in MCC did not show significant differences in the hardness (9.2-9.7 kg) of Feta-type cheese. The color of Feta-type cheese was less white with increasing the protein content in MCC. While the yellowish and greenish colors were high in Feta-type cheese made from MCC with 3% and 6% protein, no visible differences were found in the overall cheese color. The rheological characteristics were improved in Feta-type cheese made from MCC with 6% protein. We conclude that MCC with different levels of protein can be utilized in the manufacture of Feta-type cheese.

One-pot synthesis of sweetening syrup from lactose.

Lactose has become the main byproduct of many dairy products and ingredients. Current applications of lactose are insufficient to use the recovered lactose from manufacturing operations. Here we exemplified a new process for converting aqueous lactose into a sweeting syrup via one-pot synthesis. The synthesis consisted of two-steps: (1) enzymatic hydrolysis of lactose and (2) catalytic isomerization over MgO/SiO2. The hydrolysis of lactose over ß-galactosidase converted 95.77 ± 0.67% of lactose into glucose and galactose. The catalytic isomerization was performed over MgO/SiO2 with different MgO loadings (10-40 wt.%). A battery of tests was conducted to characterize the different catalysts, including surface properties, basicity, and microstructure. The one-pot synthesis, enzymatic hydrolysis and catalytic isomerization over 20%-MgO/SiO2, converted 99.3% of lactose into a sweetening syrup made of glucose (30.48%), galactose (33.51%), fructose (16.92%), D-tagatose (10.54%), and lactulose (3.62%). The outcomes of this research present an opportunity for expanding the utilization of lactose.

Short communication: A comparison of biofilm development on stainless steel and modified-surface plate heat exchangers during a 17-h milk pasteurization run.

Flow of milk through the plate heat exchanger (PHE) results in denaturation of proteins, resulting in fouling. This also accelerates bacterial adhesion on the PHE surface, eventually leading to the development of biofilms. During prolonged processing, these biofilms result in shedding of bacteria and cross-contaminate the milk being processed, thereby limiting the duration of production runs. Altering the surface properties of PHE, such as surface energy and hydrophobicity, could be an effective approach to reduce biofouling. This study was conducted to compare the extent of biofouling on native stainless steel (SS) and modified-surface [Ni-P-polytetrafluoroethylene (PTFE)] PHE during the pasteurization of raw milk for an uninterrupted processing run of 17 h. For microbial studies, raw and pasteurized milk samples were aseptically collected from inlets and outlets of both PHE at various time intervals to examine shedding of bacteria in the milk. At the end of the run, 3M quick swabs (3M, St. Paul, MN) and ATP swabs (Charm Sciences Inc., Lawrence, MA) were used to sample plates from different sections of the pasteurizers (regeneration, heating, and cooling) for biofilm screening and to estimate the efficiency of cleaning in place, respectively. The data were tested for ANOVA, and means were compared. Modified PHE experienced lower mesophilic and thermophilic bacterial attachment and biofilm formation (average log 1.0 and 0.99 cfu/cm2, respectively) in the regenerative section of the pasteurizer compared with SS PHE (average log 1.49 and 1.47, respectively). Similarly, higher relative light units were observed for SS PHE compared with the modified PHE, illustrating the presence of more organic matter on the surface of SS PHE at the end of the run. In addition, at h 17, milk collected from the outlet of SS PHE showed plate counts of 5.44 cfu/cm2, which were significantly higher than those for pasteurized milk collected from modified PHE (4.12 log cfu/cm2). This provided further evidence in favor of the modified PHE achieving better microbial quality of pasteurized milk in long process runs. Moreover, because cleaning SS PHE involves an acid treatment step, whereas an alkali treatment step is sufficient for the modified-surface PHE, use of the latter is both cost and time effective, making it a better surface for thermal processing of milk and other fluid dairy products.

Short communication: Evaluation of a sol-gel-based stainless steel surface modification to reduce fouling and biofilm formation during pasteurization of milk.

Milk fouling and biofilms are common problems in the dairy industry across many types of processing equipment. One way to reduce milk fouling and biofilms is to modify the characteristics of milk contact surfaces. This study examines the viability of using Thermolon (Porcelain Industries Inc., Dickson, TN), a sol-gel-based surface modification of stainless steel, during thermal processing of milk. We used stainless steel 316L (control) and sol-gel-modified coupons in this study to evaluate fouling behavior and bacterial adhesion. The surface roughness as measured by an optical profiler indicated that the control coupons had a slightly smoother finish. Contact angle measurements showed that the modified surface led to a higher water contact angle, suggesting a more hydrophobic surface. The modified surface also had a lower surface energy (32.4 ± 1.4 mN/m) than the control surface (41.36 ± 2.7 mN/m). We evaluated the susceptibility of control and modified stainless steel coupons to fouling in a benchtop plate heat exchanger. We observed a significant reduction in the amount of fouled layer on modified surfaces. We found an average fouling weight of 19.21 mg/cm2 and 0.37 mg/cm2 on the control and modified stainless steel coupons, respectively. We also examined the adhesion of Bacillus and biofilm formation, and observed that the modified stainless steel surface offered greater resistance to biofilm formation. Overall, the Thermolon-modified surface showed potential in the thermal processing of milk, offering significantly lower fouling and bacterial attachment than the control surface.

Evaluation of modified stainless steel surfaces targeted to reduce biofilm formation by common milk sporeformers.

The development of bacterial biofilms on stainless steel (SS) surfaces poses a great threat to the quality of milk and other dairy products as the biofilm-embedded bacteria can survive thermal processing. Established biofilms offer cleaning challenges because they are resistant to most of the regular cleaning protocols. Sporeforming thermoduric organisms entrapped within biofilm matrix can also form heat-resistant spores, and may result in a long-term persistent contamination. The main objective of this study was to evaluate the efficacy of different nonfouling coatings [AMC 18 (Advanced Materials Components Express, Lemont, PA), Dursan (SilcoTek Corporation, Bellefonte, PA), Ni-P-polytetrafluoroethylene (PTFE, Avtec Finishing Systems, New Hope, MN), and Lectrofluor 641 (General Magnaplate Corporation, Linden, NJ)] on SS plate heat exchanger surfaces, to resist the formation of bacterial biofilms. It was hypothesized that modified SS surfaces would promote a lesser amount of deposit buildup and bacterial adhesion as compared with the native SS surface. Vegetative cells of aerobic sporeformers, Geobacillus stearothermophilus (ATCC 15952), Bacillus licheniformis (ATCC 6634), and Bacillus sporothermodurans (DSM 10599), were used to study biofilm development on the modified and native SS surfaces. The adherence of these organisms, though influenced by surface energy and hydrophobicity, exhibited no apparent relation with surface roughness. The Ni-P-PTFE coating exhibited the least bacterial attachment and milk solid deposition, and hence, was the most resistant to biofilm formation. Scanning electron microscopy, which was used to visualize the extent of biofilm formation on modified and native SS surfaces, also revealed lower bacterial attachment on the Ni-P-PTFE as compared with the native SS surface. This study thus provides evidence of reduced biofilm formation on the modified SS surfaces.

Effects of dairy products on intestinal integrity in heat-stressed pigs.

Heat stress compromises intestinal integrity which may partially explain its negative effects on animal health and productivity. Research suggests that challenged intestinal barrier function improves with dietary dairy products in various models. Thus, the study objective was to evaluate the effects of bovine milk whey protein (WP) and colostral whey protein (CWP) on intestinal integrity in heat-stressed pigs. Crossbred gilts (39 ± 3 kg body weight) were fed 1 of 4 diets (n = 8 pigs/diet): control (Ct), control diet containing an 80% WP and 20% CWP product (WP80), control diet containing a 98% WP and 2% CWP product (WP98), and control diet containing a 100% WP product (WP100). After 7d on experimental diets, pigs were exposed to constant heat stress conditions (32 °C) for 24h. There were no treatment differences in growth or body temperature indices prior to heat stress. During heat exposure, both rectal temperature and respiration rate increased (+0.85 °C and 3-fold, respectively; P < 0.01), and feed intake and body weight decreased (44% and -0.5kg, respectively; P < 0.01), but neither variable was affected by dietary treatments. Plasma L-lactate and D-lactate concentrations increased (36%; P < 0.01) and tended to increase (19%; P = 0.09) with heat stress. After 24h of heat exposure, WP100-fed pigs had lower plasma D-lactate relative to Ct-fed pigs. Ileal transepithelial electrical resistance was decreased (37%; P = 0.02) in WP80 pigs, compared with controls. No differences were detected in other intestinal integrity ex vivo measurements. These data demonstrate that dietary WP and CWP did not mitigate intestinal integrity dysfunction during severe heat stress.

Pretreatment of African yam bean (Sphenostylis stenocarpa): effect of soaking and blanching on the quality of African yam bean seed.

The effect of pretreatment (soaking in sodium salts and blanching) on hydration coefficient (HC), chemical composition, texture, and color of African yam bean (AYB) was investigated. Soaking in water and in salt solutions increased the HC and about 90% of final HC values were attained at 12 and 4 hr of soaking for whole and dehulled beans, respectively. Protein content was slightly increased by soaking and blanching while ash and fat contents were reduced. Generally, a combination of dehulling and wet-processing reduced firmness of the beans more than soaking or blanching of the whole beans. Antioxidant activity was lowest (3260 TE(3)100 g) in cream-colored beans and highest (16,600 TE/100 g) in brown-colored beans. The tannin contents of unprocessed cream-colored beans and dehulled wet-processed marble variety were not significantly different (p > 0.05). The levels of tannins in the marble variety were reduced by blanching for 40 min (19.2%), soaking for 12 hr (16.0%), dehulling (72.0%), dehulling and blanching (88.8%). The whiteness of bean flours was increased significantly by dehulling, slightly by wet-processing of marble variety, and reduced significantly by wet-processing of cream-colored beans.

Glass and polymeric membrane electrodes for the measurement of pH in milk and cheese.

While there is a considerable interest in the food industry in determining various analytes using ion-selective electrodes (ISEs), only few reports describe their use for direct measurements in food. In this study, the suitability of glass electrodes and ionophore-based solvent polymeric ISEs for the determination of pH in Process cheese, Cheddar cheese and milk was investigated. The liquid junction potential between a 3M KCl bridge electrolyte and diluted as well as undiluted Process cheese was found to be negligible. Reference electrodes with ceramic plug and sleeve-type junctions performed well, although precautions needed to be taken to prevent plugging at the junctions. While the protein rennet casein posed no problems in pH measurements, the extraction of neutral lipophilic compounds or hydrophobic peptides into solvent polymeric membranes was evident, resulting in some loss of selectivity for monovalent cations upon exposure to cheese. However, it was found that ISEs based on tridodecylamine (R(3)N) as ionophore and o-nitrophenyl octyl ether (oNPOE) as plasticizer can be used to accurately measure the pH of milk and, after desensitization of the electrodes in a cheese emulsion, of diluted Process cheese. Since pH measurements with a glass electrode showed that emulsions of cheese moderately diluted to a cheese content of 70% have the same pH as undiluted cheeses, it is possible to determine the pH in cheese with ionophore-based ISEs. R(3)N membranes also performed well in undiluted milk.