Biomechanical evaluation of a central collinear entry reconstruction nail for femoral neck fracture prophylaxis.

INTRODUCTION: Reconstruction nails are commonly used to treat proximal femur fractures, with cephalic screw placement for femoral neck "prophylaxis" becoming standard practice. These implants are traditionally introduced through piriformis fossa (PF) or greater trochanter (GT) entry portals. A third "central collinear" (CC) portal has been proposed that allows entry along the femoral anatomic axis and central placement of cephalic screws. The present study aimed to quantify and compare the CC portal femoral neck strength with the two traditional (PF and GT) entry portals. MATERIALS AND METHODS: Eighteen cadaveric femur specimens (nine matched pairs) were divided into three groups using a balanced incomplete block design to control for variations in age and sex: (1) GT, (2) CC, and (3) PF entry points. Specimens and implants were cut to a standard length and instrumented with straight or valgus bend nails of appropriate laterality and two cephalic screws. Specimens were mounted on a custom jig replicating load distribution along the mechanical axis. A 100 N compressive preload was applied to the femoral head, followed by loading to failure at a rate of 10 mm/s until fracture, indicated by 30 % drop in axial force. RESULTS: THE THREE ENTRY POINTS DID NOT DIFFER IN LOAD-TO-FAILURE: GT (6378.7 ± 1494.9 N), P (6912.4 ± 4924.1 N) and CC (7044.2 ± 2911.4 N) (P = 0.948) or maximum displacement, stiffness, and toughness. Most PF specimens failed at the basicervical neck, whereas most GT specimens failed at the subcapital neck; these differences were not significant. CC specimens failed evenly split between subcapital and basicervical. CONCLUSION: There were no significant difference in femoral neck load-to-failure after placement of a reconstruction nail through a CC entry portal when compared to both GT and PF entry. Clinically, this suggests the CC entry portal is a viable option when clinical considerations warrant its use.

Polymethylmethacrylate (PMMA) Augmentation Enhances the Mechanical Characteristics of Midfoot Beam Constructs in Charcot Neuroarthropathy Cadaver Model.

BACKGROUND: Even with the best conservative care, patients with Charcot neuroarthropathy (CN) of the foot and ankle often ulcerate, increasing their risk of infection, amputation, and death. Surgical fixation has been associated with risk of recurrent ulceration, potentially due to poor bone quality prone to recurrent deformity and ulceration. We propose midfoot beam reconstruction with PMMA augmentation as a novel means of improving fixation. METHODS: A protocol was developed to create characteristic CN midfoot fragmentation both visually and fluoroscopically in each of 12 matched-pair cadaveric feet. Afterward, the pairs were divided into 2 groups: (1) midfoot beam fusion surgery alone, and (2) midfoot beam fusion surgery augmented with PMMA. A solid 7.0-mm beam was placed into the medial column and a solid 5.5-mm beam was placed across the lateral column. In the PMMA group, 8 to 10 mL of PMMA was inserted into the medial column. The hindfoot of each specimen was potted and the metatarsal heads were cyclically loaded for 1800 cycles, followed by load to failure while load and displacement were continually recorded. RESULTS: One specimen in the beam alone group failed before reaching the 1800th cycle and was not included in the failure analysis. The midfoot beam only group demonstrated greater mean displacement during cycle testing compared with the PMMA group, P < .05. The maximum force (N), stiffness (N/mm), and toughness (Nmm) were all significantly greater in the group augmented with PMMA, P < .05. CONCLUSION: In a CN cadaveric model, PMMA augmentation significantly decreased gapping during cyclic loading and nearly doubled the load to failure compared with midfoot beams alone. CLINICAL RELEVANCE: The results of this biomechanical study demonstrate that augmentation of midfoot beams with PMMA increases the strength and stiffness of the fusion construct. This increased mechanical toughness may help reduce the risk of nonunion and infection in patients with neuropathic midfoot collapse.

Novel bisphosphonate-based cathepsin K-triggered compound targets the enthesis without impairing soft tissue-to-bone healing.

Background: Osteoadsorptive fluorogenic sentinel 3 (OFS-3) is a recently described compound that contains a bone-targeting bisphosphonate (BP) and cathepsin K (Ctsk)-triggered fluorescence signal. A prior study in a murine Achilles repair model demonstrated its effectiveness at targeting the site of tendon-to-bone repair, but the intrinsic effect of this novel bisphosphonate chaperone on tendon-to-bone healing has not been previously explored. We hypothesized that application of this bisphosphonate-fluorophore cargo conjugate would not affect the biomechanical properties or histologic appearance of tendon-bone repairs. Materials and Methods: Right hindlimb Achilles tendon-to-bone repair was performed on 12-week old male mice. Animals were divided into 2 groups of 18 each: 1) Achilles repair with OFS-3 applied directly to the repair site prior to closure, and 2) Achilles repair with saline applied prior to closure. Repaired hindlimbs from 12 animals per group were harvested at 6 weeks for biomechanical analysis with a custom 3D-printed jig. At 4 and 6 weeks, repaired hindlimbs from the remaining animals were assessed histologically using H&E, immunohistochemistry (IHC) staining for the presence of Ctsk, and second harmonic generation (SHG) imaging to evaluate collagen fibers. Results: At 6 weeks, there was no significant difference in failure load, stiffness, toughness, or displacement to failure between repaired hindlimbs that received OFS-3 versus saline. There was no difference in tissue healing on H&E or Ctsk staining on immunohistochemistry between animals that received OFS-3 versus saline. Finally, second harmonic generation imaging demonstrated no difference in collagen fiber parameters between the two groups. Conclusion: OFS-3 did not significantly affect the biomechanical properties or histologic appearance of murine Achilles tendon-to-bone repairs. This study demonstrates that OFS-3 can target the site of tendon-to-bone repair without causing intrinsic negative effects on healing. Further development of this drug delivery platform to target growth factors to the site of tendon-bone repair is warranted.

Biomechanical Comparison of Ulnar Collateral Ligament Reconstruction Between Palmaris Longus Autograft and Knee Medial Collateral Ligament Allograft.

Background: Medial ulnar collateral ligament (mUCL) injury can cause significant pain and alter throwing mechanics. Common autograft options for mUCL reconstruction (UCLR) include the palmaris longus (PL) and hamstring tendons. Allograft use may reduce donor site morbidity and decrease function related to PL autografts. Purpose: To compare varus stability and load to failure between a novel allograft for UCLR-knee medial collateral ligament (kMCL)-and a PL autograft in human donor elbow specimens. Study Design: Controlled laboratory study. Methods: A total of 24 fresh-frozen human elbows were dissected to expose the mUCL. Medial elbow stability was tested with the mUCL intact (native), deficient, and reconstructed utilizing the humeral single-docking technique with either a (1) kMCL allograft (n = 12) or (2) a PL autograft (n = 12). A 3-N·m valgus torque was applied to the elbow, and valgus rotation of the ulna was recorded via motion tracking cameras. The elbow was cycled through a full range of motion 5 times. After kinematic testing, specimens were loaded to failure at 70° of elbow flexion, and failure modes were recorded. Results: The mUCL-deficient elbows demonstrated significantly greater valgus rotation compared with the intact and reconstructed elbows at every flexion angle tested (10°-120°) (P <.001). Both kMCL- and PL-reconstructed elbows exhibited significantly higher mean valgus rotation compared with the intact state between 10° and 40° of flexion (P < .01). There were no significant differences in valgus rotation at any flexion angle between the kMCL and PL graft groups. When loaded to failure, elbows reconstructed with both kMCL and PL grafts failed at similar torque values (18.6 ± 4 and 18.1 ± 3.4 N·m, respectively; P = .765). Conclusion: Fresh-frozen and aseptically processed kMCL allografts demonstrated similar kinematic and failure properties to PL tendon autografts in UCL-reconstructed elbows, although neither graft fully restored kinematics between 10° and 40°. Clinical Relevance: Prepared kMCL ligament allografts may provide a viable graft material when reconstructing elbow ligaments while avoiding the potential complications related to PL autografts- including donor site morbidity.

Contributions of the Abductor Muscles to Rotational and Distractive Stability of the Hip in a Biomechanical Cadaveric Model.

Background: The gluteus minimus (GMin) and gluteus medius (GMed) are important dynamic stabilizers of the hip, but quantitative data on their biomechanical roles in stabilizing the hip are currently lacking. Purpose: To (1) establish a reproducible biomechanical cadaveric model of the hip abductor complex and (2) characterize the effects of loading the GMin and GMed on extraneous femoral rotation and distraction. Study Design: Controlled laboratory study. Methods: A total of 10 hemipelvises were tested in 4 muscle loading states: (1) unloaded, (2) the GMin loaded, (3) the GMed loaded, and (4) both the GMin and GMed loaded. Muscle loads were applied via cables, pulleys, and weights attached to the tendons to replicate the anatomic lines of action. Specimens were tested under internal rotation; external rotation; and axial traction forces at 0°, 15°, 30°, 60°, and 90° of hip flexion. Results: When loaded together, the GMin and GMed reduced internal rotation motion at all hip flexion angles (P < .05) except 60° and reduced external rotation motion at all hip flexion angles (P < .05) except 0°. Likewise, when both the GMin and GMed were loaded, femoral distraction was decreased at all angles of hip flexion (P < .05). Conclusion: The results of this study demonstrated that the GMin and GMed provide stability against rotational torques and distractive forces and that the amount of contribution depends on the degree of hip flexion. Clinical Relevance: Improved understanding of the roles of the GMin and GMed in preventing rotational and distractive instability of the hip will better guide treatment of hip pathologies and optimize nonoperative and operative therapies.

Biomechanical Properties of Knee Medial Collateral Ligament Compared to Palmaris Longus for Ulnar Collateral Ligament Reconstruction.

Ulnar collateral ligament reconstruction (UCLR) is frequently performed among injured overhead-throwing athletes. One of the most common graft choices when performing a UCLR is the ipsilateral palmaris longus tendon (PL). The purpose of this study was to investigate the material properties of aseptically processed cadaveric knee collateral ligaments (kMCL) as a potential graft source for UCLR and compare them to the gold standard PL autograft. Each PL and kMCL cadaveric sample was subjected to cyclic preconditioning, stress relaxation, and load-to-failure testing, and the mechanical properties were recorded. PL samples exhibited a greater average decrease in stress compared to the kMCL samples during the stress-relaxation test (p < 0.0001). PL samples also demonstrated a greater average Young's modulus in the linear region of the stress-strain curve compared to the kMCL samples (p < 0.01). The average yield strain and maximum strain of kMCL samples were significantly greater than the PL, p = 0.03 and 0.02, respectively. Both graft materials had comparable maximum toughness and demonstrated a similar ability to deform plastically without rupture. The clinical significance of our result is that prepared knee medial collateral ligament allografts may provide a viable graft material for use in the reconstruction of elbow ligaments.

iPSC-derived tenocytes seeded on microgrooved 3D printed scaffolds for Achilles tendon regeneration.

Tendons and ligaments have a poor innate healing capacity, yet account for 50% of musculoskeletal injuries in the United States. Full structure and function restoration postinjury remains an unmet clinical need. This study aimed to assess the application of novel three dimensional (3D) printed scaffolds and induced pluripotent stem cell-derived mesenchymal stem cells (iMSCs) overexpressing the transcription factor Scleraxis (SCX, iMSCSCX+ ) as a new strategy for tendon defect repair. The polycaprolactone (PCL) scaffolds were fabricated by extrusion through a patterned nozzle or conventional round nozzle. Scaffolds were seeded with iMSCSCX+ and outcomes were assessed in vitro via gene expression analysis and immunofluorescence. In vivo, rat Achilles tendon defects were repaired with iMSCSCX+ -seeded microgrooved scaffolds, microgrooved scaffolds only, or suture only and assessed via gait, gene expression, biomechanical testing, histology, and immunofluorescence. iMSCSCX+ -seeded on microgrooved scaffolds showed upregulation of tendon markers and increased organization and linearity of cells compared to non-patterned scaffolds in vitro. In vivo gait analysis showed improvement in the Scaffold + iMSCSCX+ -treated group compared to the controls. Tensile testing of the tendons demonstrated improved biomechanical properties of the Scaffold + iMSCSCX+ group compared with the controls. Histology and immunofluorescence demonstrated more regular tissue formation in the Scaffold + iMSCSCX+ group. This study demonstrates the potential of 3D-printed scaffolds with cell-instructive surface topography seeded with iMSCSCX+ as an approach to tendon defect repair. Further studies of cell-scaffold constructs can potentially revolutionize tendon reconstruction by advancing the application of 3D printing-based technologies toward patient-specific therapies that improve healing and functional outcomes at both the cellular and tissue level.

Suture Tape Augmentation Increases the Time-Zero Stiffness and Strength of Anterior Cruciate Ligament Grafts: A Cadaveric Study.

Purpose: To determine the postsurgical strength and stiffness of anterior cruciate ligament (ACL) reconstructions with (ACLR-SA) and without suture tape augmentation (ACLR) in a human cadaveric model. Methods: Eight matched pairs of cadaveric knees were tested intact and after bone-patellar tendon-bone ACL reconstruction. Specimens were potted and loaded onto a mechanical testing system, and an anterior drawer force of 88N was applied at 0°, 15°, 30°, 60°, and 90° of flexion. Specimens were then loaded to failure, with clinical failure defined as anterior translation greater than 10 mm. Results: ACL-intact knees translated an average of 4.99 ± 0.28 mm across all flexion angles when an 88N anterior load was applied. ACLR knees had significantly greater translation compared to intact specimens. ACLRs with suture augmentation had less of an increase (0.67 mm, 95% confidence interval [CI]: 0.20, 1.14, P < .01) than those without suture augmentation (1.42 mm, 95% CI: 0.95, 1.89, P < .001). ACLR-SA required greater anterior load (170.4 ± 38.1 N) to reach clinical failure compared to ACLR alone (141.8 ± 51.2 N), P = .042. In addition, stiffness of ACLR-SA constructs (23.5 ± 3.3) were significantly greater than ACLR alone (20.3 ± 3.9), P = .003. Conclusion: Augmentation of ACLR with suture tape allowed full range of motion with improved graft stiffness and increased failure load compared to unaugmented ACLR in this time-zero study. Clinical Relevance: Internal bracing may help reinforce ACLR grafts and allow for acceleration of rehabilitation protocols and earlier return to activity.

Comparable Torque to Failure Using the Simple Stich Versus the Figure-of-Eight Configuration for Hip Capsular Closure Following an Interportal Capsulotomy: A Cadaveric Study.

PURPOSE: To measure and compare the torque to failure and stiffness of the capsular repair construct consisting of four-suture simple stitches to a two-figure of eight stitches repair construct in external rotation following an interportal capsulotomy. METHODS: Six pairs of fresh-frozen cadaveric hemipelves were divided into two capsular repair groups. All hips underwent a 40-mm interportal capsulotomy from the 12 o'clock position to the 3 o'clock position. Capsular closure was performed using either the two stitches in a figure of eight or with four simple stitches. Afterward, each hemipelvis was securely fixed to the frame of a mechanical testing system with the hip in 10° of extension and externally rotated to failure. Significance was set at P < .05. RESULTS: The average failure torque was 86.2 ± 18.9 N·m and 81.5 ± 8.9 N·m (P = .57) for the two stitches in a figure of eight and the four simple stitches, respectively. Failure stiffness was also not statistically different between groups and both capsular closure techniques failed at similar degrees of rotation (P = .65). CONCLUSION: Hip capsular repair using either the four simple stitch or two-figure of eight configurations following interportal capsulotomy demonstrated comparable failure torques and similar stiffness in a cadaveric model. CLINICAL RELEVANCE: Adequate and comprehensive capsular management in hip arthroscopy is critical. Capsular repair following capsulotomy in femoroacetabular impingement surgery has been associated with higher patient-reported outcomes when compared to capsulotomy without repair. Therefore, determining which capsular closure construct provides the higher failure torque is important.

An Increased Allograft Width for Circumferential Labral Reconstruction Better Restores Distractive Stability of the Hip: A Cadaveric Biomechanical Analysis.

BACKGROUND: Questions remain about whether circumferential labral reconstruction (CLR) using an iliotibial band (ITB) allograft can effectively restore the labral suction seal of the hip. HYPOTHESES: (1) CLR with an ITB allograft >6.5 mm would restore distractive stability force to that of the intact labrum. (2) CLR with an ITB allograft >6.5 mm would achieve significantly superior distractive stability force compared with CLR with an ITB allograft <6.5 mm. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 6 fresh-frozen pelves with attached femurs (n = 12 matched hemipelves) from male donors were procured and dissected free of all soft tissue, including the hip capsule but preserving the native labrum, transverse acetabular ligament, and ligamentum teres. Potted hemipelves were placed in a saline bath and securely fixed to the frame of a hydraulic testing system. A 500-N compressive load was applied, followed by femoral distraction at a rate of 5.0 mm/s until the suction seal ruptured. Force and femoral displacement were continually recorded. Force versus displacement curves were plotted, the maximum force was recorded, and the amount of femoral distraction to rupture the suction seal was determined. After intact testing, the labrum was excised, and specimens were retested using the same protocol. CLR was subsequently performed twice in a randomized fashion using (1) an ITB allograft with a width >6.5 mm (7.5-9.0 mm) and (2) an ITB allograft with a width <6.5 mm (4.5-6.0 mm). Specimens were retested after each CLR procedure. Force (in Newtons) and femoral distraction (in millimeters) required to rupture the suction seal were measured and compared between the 4 testing states (intact, deficient, CLR <6.5 mm, and CLR >6.5 mm) using repeated-measures analysis of variance. RESULTS: On average, intact specimens required 148.4 ± 33.1 N of force to rupture the hip suction seal, which significantly decreased to 44.3 N in the deficient state (P < .001). CLR with ITB allografts <6.5 mm did not improve the maximum force (63 ± 62 N) from the deficient state (P = .42) and remained significantly lower than the intact state (P < .01). CLR with ITB allografts >6.5 mm recorded significantly greater force to rupture the suction seal (135.8 ± 44.6 N) compared with both the deficient and CLR <6.5 mm states (P < .01), with a mean force comparable with the intact labrum (P = .59). The amount of femoral distraction to rupture the suction seal demonstrated similar findings. CONCLUSION: In a cadaveric model, CLR using ITB allografts >6.5 mm restored the distractive force and distance to the suction seal rupture to values comparable with hips with an intact labrum. CLR using ITB allografts >6.5 mm outperformed CLR with ITB allografts <6.5 mm, demonstrated by a significantly higher force to rupture the suction seal and increased distraction before the rupture. CLINICAL RELEVANCE: The results of this cadaveric investigation suggest that using wider labral allografts during CLR will provide the distractive force required to rupture the suction seal and immediate postoperative stability of the hip, although further studies are required to determine if these results translate to improved clinical outcomes.

Biomechanical Comparison of Ulnar Collateral Ligament Reconstruction With and Without Suture Augmentation.

BACKGROUND: A common concern associated with elbow ulnar collateral ligament (UCL) reconstruction is the amount of time required for recovery and rehabilitation. For example, for Major League Baseball pitchers, the average time to return to competition ranges from 13.8 to 20.5 months. Suture tape augmentation has shown the ability to provide additional soft tissue stability across other joints in the body. By providing an additional checkrein to the UCL reconstruction while the graft is healing, it may be possible to accelerate the rehabilitation process in overhead athletes and thus effect a quicker return to sports. PURPOSE: To compare elbow valgus stability and load to failure between UCL reconstruction with and without suture tape augmentation. STUDY DESIGN: Controlled laboratory study. METHODS: Fresh-frozen cadaveric elbows (N = 24) were dissected to expose the UCL. Medial elbow stability was tested with the UCL intact, deficient, and reconstructed utilizing the 3-strand docking technique with or without suture augmentation. A 3-N·m valgus torque was applied to the elbow, and valgus rotation of the ulna was recorded via motion-tracking cameras as the elbow was cycled through a full range of motion. After kinematic testing, reconstructed specimens were loaded to failure at 70° of elbow flexion. RESULTS: UCL-deficient elbows demonstrated significantly greater valgus rotation when compared with intact and internally braced reconstructed elbows at every angle of flexion tested and when compared with unbraced UCL-reconstructed elbows at 50° to 120° of flexion (P < .05). There were no significant differences between intact and UCL-reconstructed elbows with and without suture augmentation at any flexion angle tested. When loaded to failure, unbraced reconstructed elbows failed at a significantly lower torque as compared with elbows with UCL reconstruction with suture tape augmentation (P < .01). CONCLUSION: In this cadaveric model, 3-strand UCL reconstruction with suture augmentation did not overconstrain the elbow throughout all flexion angles when compared with the native state and UCL reconstruction alone, while providing greater load to failure. CLINICAL RELEVANCE: Suture tape augmentation may provide the additional strength necessary to accelerate rehabilitation after UCL reconstruction.

Proximal Overresection During Femoral Osteochondroplasty Negatively Affects the Distractive Stability of the Hip Joint: A Cadaver Study.

BACKGROUND: Contact between the acetabular labrum and articular cartilage of the femoral head creates a suction seal that helps maintain stability of the femoral head in the acetabulum. A femoral osteochodroplasty may occasionally extend proximally into the femoral head, diminishing the articular surface area available for sealing contact. PURPOSE: To determine whether proximal overresection decreases the rotational and distractive stability of the hip joint. STUDY DESIGN: Controlled laboratory study. METHODS: Six hemipelvises in the following conditions were tested: intact, T-capsulotomy, osteochondroplasty to the physeal scar, and 5- and 10-mm proximal extension. The pelvis was secured to a metal plate, and the femur was potted and attached to a multiaxial hip jig. Specimens were axially distracted using a load from 0 to 150 N. For rotational stability testing, 5 N·m of internal and external torque was applied. Both tests were performed at different angles of flexion (0°, 15°, 30°, 60°, 90°). Displacement and rotation were recorded using a 3-dimensional motion tracking system. RESULTS: The T-capsulotomy decreased the distractive stability of the hip joint. A femoral osteochondroplasty up to the physeal scar did not seem to affect the distractive stability. However, a proximal extension of the resection by 5 and 10 mm increased axial instability at every angle of flexion tested, with the greatest increase observed at larger angles of flexion (P < .01). External rotation increased significantly after T-capsulotomy in smaller angles of flexion (0°, P = .01; 15°, P = .01; 30°, P = .03). Femoral osteochondroplasty did not create further external rotational instability, except when the resection was extended 10 mm proximally and the hip was in 90° of flexion (P = .04). CONCLUSION: This cadaveric study demonstrated that proximal extension of osteochondroplasty into the femoral head compromises the distractive stability of the hip joint but does not affect hip rotational stability. CLINICAL RELEVANCE: Clinically, this study highlights the importance of accuracy when performing femoral osteochondroplasty to minimize proximal extension that may increase iatrogenic instability of the hip joint.

Characterization of Infraspinatus Tendon Anatomy: The Soft-Tissue Portion of Remplissage.

PURPOSE: To characterize the morphology of the infraspinatus (IS) tendon and evaluate the bony anatomy of the humeral head (HH) to determine if there is a correlation between HH measurements and the amount of available IS tendon. METHODS: The superior-inferior width as well as the medial-lateral (M-L) length of the inferior and superior portions of the IS tendon were measured in 15 human cadaveric shoulders. Three measurements were then obtained for each corresponding humeral head: (1) anterior to posterior (A-P) distance, (2) midcoronal humeral head distance (MCHH), and (3) M-L distance. Pearson correlation coefficients (R) of tendon measurements relative to HH measurements were determined. RESULTS: The mean ± SD HH measurements were 44.3 ± 3.3 mm for A-P, 49.3 ± 3.4 mm at the MCHH, and 52.2 ± 3.4 mm in the M-L plane. The mean M-L length of the superior portion of the IS tendon was significantly different from the inferior portion (42.4 vs 31.0 mm, P < .0001). The mean ± SD width of the IS tendon was 19.4 ± 3.0mm. There was a statistically significant correlation (R = 0.58) between the M-L length of the superior IS tendon relative to the M-L HH distance (P < .05) and the A-P HH distance (P < .05). CONCLUSIONS: The superior M-L IS tendon length was significantly greater than the inferior M-L length. The M-L HH and the AP HH distances were significantly correlated to the M-L length of the superior portion of the IS tendon. These relationships may provide an estimation of the length of available IS tendon to help guide the management of Hill-Sachs lesions (HSLs). CLINICAL RELEVANCE: Knowledge of the available IS length can help optimize the management of HSLs following anterior shoulder dislocation. If IS tendon M-L length is less than HSL M-L length, then remplissage may result in capsulomyodesis rather than tenodesis. Placement of the superior anchor in a position that is as superior as possible within the HSL defect will maximize the opportunity for IS tenodesis.

Posterior Lateral Meniscal Root Tears Increase Strain on the Reconstructed Anterior Cruciate Ligament: A Cadaveric Study.

PURPOSE: To quantify the amount of strain across an anterior cruciate ligament reconstruction (ACLR) before and after a lateral meniscus (LM) posterior root complex tear and determine whether a meniscal root repair effectively protects the ACLR against excessive strain. METHODS: Fresh-frozen cadaveric knees were tested with an 88-N anterior drawer force and an internal and external torque of 5-Nm applied at 0°, 15°, 30°, 60°, and 90° of flexion. A simulated pivot shift was also applied at 0, 15, and 30° of flexion. Rotation and translation of the tibia, and strain across the ACL graft were recorded. Testing was repeated for the following four conditions: ACL-intact, ACLR with intact LM, ACLR with LM posterior root complex tear, and ACLR with root repair. RESULTS: The kinematic data from 12 fresh frozen cadaveric knees underwent analysis. Only 11 specimens had usable strain data. Sectioning the meniscofemoral ligaments and the LM posterior root increased rotational and translational laxity at 30° of knee flexion. ACLR graft strain significantly increased when an anterior load and internal torque were applied. Repair of the LM posterior root reduced strain when the knee was internally rotated but was unable to normalize strain when an anterior force was applied. CONCLUSIONS: This cadaveric biomechanical study suggests injury to the LM posterior root complex increases rotational and anterior laxity of the knee and places increased strain across reconstructed ACL grafts. Subsequent root repair did not result in a statistically significant reduction in strain. CLINICAL RELEVANCE: This study provides quantitative data on the implications of a LM posterior root injury in the setting of an ACL reconstruction to help guide clinical decision-making.

Pie-Crusting Capsulotomy Provides Similar Visualization With Increased Repair Stiffness Compared With a T-Capsulotomy: A Biomechanical Study.

PURPOSE: To compare the area of visualization, capsular stiffness, and strength between the pie-crusting capsulotomy technique and the T-capsulotomy technique following repair. METHODS: Eight matched pairs of fresh-frozen cadaveric hips (n = 16) were divided to either T-capsulotomy or pie-crusting capsulotomy followed by subsequent repair. The area of visualization was measured for all capsulotomy states using a digitizing probe. Hips were then distracted along the iliofemoral ligament in the intact, extended capsulotomy, and repair states. Afterwards, specimens were externally rotated to failure. RESULTS: An average force of 250.1 ± 16.1 N was required to distract intact hips to 6 mm. Both extended capsulotomy techniques reduced the force required to distract the hip 6 mm with no statistical difference between the two (T-capsulotomy [T-cap] = 114.3 ± 63.4 N vs pie-capsulotomy [Pie-cap] = 170.1 ± 38.8 N), P = .07. Subsequent repair of the extended capsulotomies demonstrated the pie-crust capsulotomy required significantly greater force to reach 6 mm of distraction than those with a repaired T-capsulotomy (T-cap = 165.04 ± 40.43N vs Pie-cap = 204.43 ± 10.13N), P = .03. There was no significant difference in ultimate torque to failure between the 2 techniques (T-cap = 22.0 ± 7.41 N·m vs Pie-cap = 27.01 ± 11.13 N·m), P = .28. Visualization significantly increased with each extended capsulotomy, with an average increase of 62% (P < .001) and 48% (P < .001) for the pie- and T-capsulotomies, respectively. CONCLUSIONS: The pie-crusting technique maintained similar strength and increased stiffness to the T-capsulotomy following repair while using less suture. Both techniques provided similar visualization. Clinically, the pie-crusting technique provides an alternative to the T-capsulotomy with similar biomechanical and visual outcomes. CLINICAL RELEVANCE: Visualization during hip arthroscopy can be difficult with large cam morphology. Techniques to improve visualization while restoring the native biomechanics of the hip as best as possible are important.

Neural crest-derived mesenchymal progenitor cells enhance cranial allograft integration.

Replacement of lost cranial bone (partly mesodermal and partly neural crest-derived) is challenging and includes the use of nonviable allografts. To revitalize allografts, bone marrow-derived mesenchymal stromal cells (mesoderm-derived BM-MSCs) have been used with limited success. We hypothesize that coating of allografts with induced neural crest cell-mesenchymal progenitor cells (iNCC-MPCs) improves implant-to-bone integration in mouse cranial defects. Human induced pluripotent stem cells were reprogramed from dermal fibroblasts, differentiated to iNCCs and then to iNCC-MPCs. BM-MSCs were used as reference. Cells were labeled with luciferase (Luc2) and characterized for MSC consensus markers expression, differentiation, and risk of cellular transformation. A calvarial defect was created in non-obese diabetic/severe combined immunodeficiency (NOD/SCID) mice and allografts were implanted, with or without cell coating. Bioluminescence imaging (BLI), microcomputed tomography (µCT), histology, immunofluorescence, and biomechanical tests were performed. Characterization of iNCC-MPC-Luc2 vs BM-MSC-Luc2 showed no difference in MSC markers expression and differentiation in vitro. In vivo, BLI indicated survival of both cell types for at least 8 weeks. At week 8, µCT analysis showed enhanced structural parameters in the iNCC-MPC-Luc2 group and increased bone volume in the BM-MSC-Luc2 group compared to controls. Histology demonstrated improved integration of iNCC-MPC-Luc2 allografts compared to BM-MSC-Luc2 group and controls. Human osteocalcin and collagen type 1 were detected at the allograft-host interphase in cell-seeded groups. The iNCC-MPC-Luc2 group also demonstrated improved biomechanical properties compared to BM-MSC-Luc2 implants and cell-free controls. Our results show an improved integration of iNCC-MPC-Luc2-coated allografts compared to BM-MSC-Luc2 and controls, suggesting the use of iNCC-MPCs as potential cell source for cranial bone repair.

Biomechanical Comparison of UCL Repair Using Suspensory Fixation Versus UCL Reconstruction.

BACKGROUND: Medial ulnar collateral ligament (mUCL) repair is growing in popularity as a treatment for younger athletes with mUCL tears. One of the most recent techniques utilizes a collagen-coated suture tape to augment the repair. The most popular repair technique uses a screw for proximal fixation in the humerus. We present an alternative technique that uses suspensory fixation in the proximal humerus. PURPOSE: To biomechanically compare elbow valgus stability and load to failure of a novel alternative repair technique with suspensory fixation to an mUCL reconstruction. STUDY DESIGN: Controlled laboratory study. METHODS: Eighteen fresh-frozen cadaveric elbows were dissected to expose the mUCL. Medial elbow stability was tested with the mUCL in an intact, deficient-either repaired or reconstructed-state. The repair technique used a suspensory fixation with suture augmentation, and the docking technique was used on all reconstructions. A 3-N·m valgus torque was applied to the elbow, and valgus rotation of the ulna was recorded via motion tracking cameras as the elbow was cycled through a full range of motion. After kinematic testing, specimens were loaded to failure at 70° of elbow flexion. RESULTS: Both ulnar collateral ligament reconstruction and repair restored valgus stability to levels that were not statistically different from intact at all angles of flexion. There was no significant difference in the ultimate torque to failure between repaired and reconstructed mUCLs. CONCLUSION: There was no significant difference in the valgus strength between the mUCL repair with suspensory fixation and the mUCL reconstruction. CLINICAL RELEVANCE: Suspensory fixation is an alternative method for proximal fixation in the mUCL without compromising the strength of the construct.

Assessing the Resident Progenitor Cell Population and the Vascularity of the Adult Human Meniscus.

PURPOSE: To identify, characterize, and compare the resident progenitor cell populations within the red-red, red-white, and white-white (WW) zones of freshly harvested human cadaver menisci and to characterize the vascularity of human menisci using immunofluorescence and 3-dimensional (3D) imaging. METHODS: Fresh adult human menisci were harvested from healthy donors. Menisci were enzymatically digested, mononuclear cells isolated, and characterized using flow cytometry with antibodies against mesenchymal stem cell surface markers (CD105, CD90, CD44, and CD29). Cells were expanded in culture, characterized, and compared with bone marrow-derived mesenchymal stem cells. Trilineage differentiation potential of cultured cells was determined. Vasculature of menisci was mapped in 3D using a modified uDisco clearing and immunofluorescence against vascular markers CD31, lectin, and alpha smooth muscle actin. RESULTS: There were no significant differences in the clonogenicity of isolated cells between the 3 zones. Flow cytometry showed presence of CD44+CD105+CD29+CD90+ cells in all 3 zones with high prevalence in the WW zone. Progenitors from all zones were found to be potent to differentiate to mesenchymal lineages. Larger vessels in the red-red zone of meniscus were observed spanning toward red-white, sprouting to smaller arterioles and venules. CD31+ cells were identified in all zones using the 3D imaging and co-localization of additional markers of vasculature (lectin and alpha smooth muscle actin) was observed. CONCLUSIONS: The presence of resident mesenchymal progenitors was evident in all 3 meniscal zones of healthy adult donors without injury. In addition, our results demonstrate the presence of vascularization in the WW zone. CLINICAL RELEVANCE: The existence of progenitors and presence of microvasculature in the WW zone of the meniscus suggests the potential for repair and biologic augmentation strategies in that zone of the meniscus in young healthy adults. Further research is necessary to fully define the functionality of the meniscal blood supply and its implications for repair.

Advanced Glycation End Product Inhibitor Pyridoxamine Attenuates IVD Degeneration in Type 2 Diabetic Rats.

Type 2 diabetes mellitus (T2DM) is associated with advanced glycation end product (AGE) enrichment and considered a risk factor for intervertebral disc (IVD) degeneration. We hypothesized that systemic AGE inhibition, achieved using pyridoxamine (PM), attenuates IVD degeneration in T2DM rats. To induce IVD degeneration, lumbar disc injury or sham surgery was performed on Zucker Diabetic Sprague Dawley (ZDSD) or control Sprague Dawley (SD) rats. Post-surgery, IVD-injured ZDSD rats received daily PM dissolved in drinking water or water only. The resulting groups were SD uninjured, SD injured, ZDSD uninjured, ZDSD injured, and ZDSD injured + PM. Levels of blood glycation and disc degeneration were investigated. At week 8 post-surgery, glycated serum protein (GSP) levels were increased in ZDSDs compared to SDs. PM treatment attenuated this increase. Micro-MRI analysis demonstrated IVD dehydration in injured versus uninjured SDs and ZDSDs. In the ZDSD injured + PM group, IVD dehydration was diminished compared to ZDSD injured. AGE levels were decreased and aggrecan levels increased in ZDSD injured + PM versus ZDSD injured rats. Histological and immunohistochemical analyses further supported the beneficial effect of PM. In summary, PM attenuated GSP levels and IVD degeneration processes in ZDSD rats, demonstrating its potential to attenuate IVD degeneration in addition to managing glycemia in T2DM.

Comparative Analysis of Sagittal-Plane Radiographic Landmarks Used to Identify the Femoral Attachments of Lateral Knee Structures.

PURPOSE: To compare previously described radiographic parameters for the localization of the lateral knee (LK) structures, including the popliteal tendon (Pop), anterolateral ligament (ALL), and lateral collateral ligament (LCL), to determine which method best estimates the femoral attachment of each LK structure. METHODS: Twenty-nine human cadaveric knee specimens were carefully dissected to identify the LCL, ALL, and Pop. The femoral attachment for each structure was labeled with a radiopaque bead. LK radiographic images were obtained using fluoroscopy. Two radiographic approaches were used to identify each LK structure (Pop-A, Pop-B, LCL-A, LCL-B, ALL-A, and ALL-B) via previously published methods based on radiographic landmarks including the posterior femoral cortex and the Blumensaat line. The identification of radiographic landmarks was performed at 2 different time points by 2 different surgeons to determine the Pearson correlation between values, as well as interobserver and intraobserver reliability and reproducibility. The paired t test was conducted to compare the distance between the actual attachment site (as determined by the bead location) and the 2 radiographically identified estimations of attachment locations. RESULTS: For the LCL, the mean difference between the actual location and the estimated location via application of the LCL-B method (5.0 ± 2.4 mm) was significantly less than that estimated using the LCL-A method (8.2 ± 3.3 mm, P < .0001). Likewise, the Pop-B (5.7 ± 2.0 mm) and ALL-B (9.3 ± 4.5 mm) methods were shown to have smaller differences between the actual and estimated femoral attachment sites of the Pop insertion and ALL insertion, respectively (P < .0001). Methods for estimating the ALL femoral origin were the worst among the LK structures analyzed, with 90% of estimated values greater than 5 mm from the anatomic origin. Interobserver and intraobserver intraclass correlation coefficients were 0.785 or higher. CONCLUSIONS: Previously described radiographic methods for localization of the femoral attachment sites of the LK structures resulted in estimated locations that were significantly different from the locations of the radiographic beads placed at the anatomic femoral attachment sites of these structures. Therefore, radiographic methods used to localize the femoral attachments of the LK structures may not be reliable. CLINICAL RELEVANCE: This study shows the variability of the anatomy of the LK structures and the lack of reproducible radiographic criteria to identify these structures. As a result, there will be decreased reliance on radiographic landmarks to identify the placement of femoral grafts and fixation when reconstructing these structures.